AQW610S.

VDE (AQW610S) (AQW612S) Both NO and NC contacts incorporated in a small SOP8-pin package 4.4 .173 2.1 .083 9.37 .369 mm inch 1 N.C. 8 2 7 3 6 4 5 N.O. RoHS compliant GU SOP 1 Form A & 1 Form B (AQW61❍S) FEATURES TYPICAL APPLICATIONS 1. Normally open and normally closed contacts in a SOP package The device comes in a miniature SOP measuring (W) 4.4 × (L) 9.37 × (H) 2.1 mm (W) .173× (L) .369× (H) .083 inch — approx. 38% of the volume and 66% of the footprint size of DIP type. 2. 60V type couples high capacity (0.45A) with low on-resistance (typ. 1Ω) (AQW612S). 3. Applicable for 1 Form A and 1 Form B use as well as two independent 1 Form A and 1 Form B use 4. Controls low-level analog signals PhotoMOS feature extremely low closedcircuit offset voltage to enable control of low-level analog signals without distortion 5. Low-level off-state leakage current of max. 1 μA • Power supply • Measuring equipment • Security equipment • Telephone equipment • Computer input machines • Industrial robots • High-speed inspection machines TYPES Output rating* AC/DC dual use Load voltage Load current 60V 450mA Part No. Package Tube packing style Packing quantity Tape and reel packing style Picked from the Picked from the 1/2/3/4-pin side 5/6/7/8-pin side AQW612S AQW612SX AQW612SZ AQW610S AQW610SX AQW610SZ SOP8-pin 350V 100mA Tube Tape and reel 1 tube contains: 50 pcs. 1 batch contains: 1,000 pcs. 1,000 pcs. * Indicate the peak AC and DC values. Note: The packing style indicator “X” or “Z” are not marked on the device. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Input Output Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Symbol IF VR IFP Pin VL AQW612S 60 V 350 V Continuous load current IL 0.45 A (0.55 A) 0.1 A (0.13 A) Ipeak Pout PT Viso Topr Tstg 1.5 A Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature limits Operating Storage AQW610S 50 mA 5V 1A 75 mW f = 100 Hz, Duty factor = 0.1% 0.3 A 600 mW 650 mW 1,500 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F –1– Remarks Peak AC, DC ( ): in case of using only 1a or 1b, 1 channel 100 ms (1 shot), VL = DC Non-condensing at low temperatures ASCTB137E 201404-T GU SOP 1 Form A & 1 Form B (AQW61❍S) 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol Typical Maximum Minimum Typical Typical Maximum LED operate current Input LED reverse current LED dropout voltage AQW612S AQW610S 0.9 mA 3 mA 0.4 mA 0.8 mA 1.25 V (1.14 V at IF = 5 mA) 1.5 V IFon IFoff VF Typical On resistance 18 Ω 2.5 Ω 25 Ω IL = Max. IL = Max. IF = 50 mA IF = 5 mA (N.O.) IF= 0 mA (N.C.) IL = Max. Within 1 s on time IF = 0 mA (N.O.) IF= 5 mA (N.C.) VL = Max. Ron Maximum Output Off state leakage current Operate time* Reverse time* Transfer characteristics 1Ω Condition I/O capacitance Initial I/O isolation resistance Maximum ILeak 1 μA Typical Maximum Typical Maximum Typical Maximum Minimum Ton (N.O.) Toff (N.C.) 0.65 ms (N.O.), 0.9 ms (N.C.) 0.28 ms (N.O.), 0.52 ms (N.C.) 3.0 ms 1.0 ms 0.08 ms (N.O.), 0.2 ms (N.C.) 0.04 ms (N.O.), 0.23 ms (N.C.) 1.0 ms 1.0 ms 0.8 pF Toff (N.O.) Ton (N.C.) Ciso IF = 0 mA ➝ 5 mA IL = Max. IF = 5 mA ➝ 0 mA IL = Max. f = 1 MHz VB = 0 V 1.5 pF 1,000 MΩ Riso 500 V DC *Operate/Reverse time 1) N.O. 2) N.C. Input Input 90% Output 10% Ton Output 10% 90% Toff Toff Ton RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper device operation and resetting. Item Input LED current Symbol IF Recommended value 5 Unit mA ■ These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate time vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 50 2.0 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 500 AQW612S (Using 2 channels) 400 300 40 30 AQW610S 20 Operate time, ms Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) AQW612S (Using only 1 channel) On resistance, Ω Load current, mA 600 1.6 1.2 AQW612S 0.8 200 100 AQW610S (Using only 1 channel) AQW610S (Using 2 channels) 0 -40 -20 0 20 40 60 10 0.4 AQW612S 80 85 100 Ambient temperature, °C 0 -40 -20 0 20 40 60 80 85 Ambient temperature, °C –2– AQW610S 0 -40 -20 0 20 40 60 80 85 Ambient temperature, °C ASCTB137E 201404-T GU SOP 1 Form A & 1 Form B (AQW61❍S) 4. Reverse time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED reverse current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 5 LED operate current, mA Reverse time, ms Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 0.8 0.6 0.4 AQW612S AQW610S Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 4 3 2 LED reverse current, mA 1.0 1 0.2 0 -40 -20 0 0 20 40 60 8085 100 Ambient temperature, °C Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 4 3 2 1 –40 –20 0 20 40 60 0 80 85 –40 0 –20 20 40 60 80 85 Ambient temperature, °C Ambient temperature, °C 7. LED dropout voltage vs. ambient temperature characteristics 8-(1). Current vs. voltage characteristics of output at MOS portion 8-(2). Current vs. voltage characteristics of output at MOS portion LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Current, A 1.4 1.3 1.2 1.0 AQW610S –40 –20 -1 0.5 1 1.5 2 2.5 3 -20 Voltage, V -40 -60 -80 -100 -120 -140 50mA 30mA 20mA 10mA 5mA 1.1 0 0.6 Between terminals 5 and 6 (N.O.) Between terminals 0.4 7 and 8 (N.C.) 140 Between terminals 120 5 and 6 (N.O.) Between terminals 100 7 and 8 (N.C.) 80 60 40 20 -3 -2.5 -2 -1.5 -1 -0.5 Current, mA LED dropout voltage, V 1.5 0 20 40 60 80 85 Ambient temperature, °C AQW612S 0.2 -0.5 0 0 0.5 Voltage, V 1 -0.2 -0.4 -0.6 9-(1). Off state leakage current vs. load voltage characteristics 9-(2). Off state leakage current vs. load voltage characteristics 10. Operate time vs. LED forward current characteristics Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F 10 –6 10 –9 10 –12 AQW610S 10 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) –3 10 –6 10 –9 10 –12 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) Operate time, ms –3 Off state leakage current, A Off state leakage current, A 5 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 10 AQW612S 4 3 AQW610S 2 AQW612S 1 0 20 40 60 80 0 100 20 40 Load voltage, V 80 60 100 Load voltage, V 11. Reverse time vs. LED forward current characteristics 12. Output capacitance vs. applied voltage characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 0 mA (N.O.), 5 mA (N.C.); Frequency: 1 MHz; Ambient temperature: 25°C 77°F 0.5 0.4 0.3 AQW610S 0.2 AQW612S 0.1 Output capacitance, pF Reverse time, ms 0 10 20 30 40 50 LED forward current, mA 60 500 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 0 0 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 400 300 200 AQW612S 100 0 10 20 30 40 50 LED forward current, mA 60 0 AQW610S 0 10 20 30 40 50 60 Applied voltage, V –3– ASCTB137E 201404-T