AQW612SZ

(AQW610S) (AQW612S) 4.4 .173 2.1 .083 9.37 .369 mm inch 1 N.C. 8 2 7 3 6 5 4 N.O. RoHS compliant Both N.O. and N.C. contacts incorporated in a small SOP8-pin package GU SOP 1 Form A & 1 Form B FEATURES TYPICAL APPLICATIONS 1. Normally open and normally closed contacts in a SOP package The device comes in a miniature SOP measuring (W) 4.4 × (L) 9.37 × (H) 2.1 mm (W) .173× (L) .369× (H) .083 inch — approx. 38% of the volume and 66% of the footprint size of DIP type. 2. 60V type couples high capacity (0.45A) with low on-resistance (Typ. 1Ω) (AQW612S). 3. Applicable for 1 Form A and 1 Form B use as well as two independent 1 Form A and 1 Form B use 4. Controls low-level analog signals PhotoMOS feature extremely low closedcircuit offset voltage to enable control of low-level analog signals without distortion 5. Low-level off-state leakage current of max. 1 μA • Power supply • Measuring equipment • Security equipment • Telephone equipment • Computer input machines • Industrial robots (AQW61❍S) TYPES Output rating* AC/DC dual use Load voltage Load current 60V 450mA Part No. Package Tube packing style Packing quantity Tape and reel packing style Picked from the Picked from the 1/2/3/4-pin side 5/6/7/8-pin side AQW612S AQW612SX AQW612SZ AQW610S AQW610SX AQW610SZ SOP8-pin 350V 100mA Tube Tape and reel 1 tube contains: 50 pcs. 1 batch contains: 1,000 pcs. 1,000 pcs. * Indicate the peak AC and DC values. Note: The packing style indicator “X” or “Z” are not marked on the device. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Input Output Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Symbol IF VR IFP Pin VL AQW612S 60 V 350 V Continuous load current IL 0.45 A (0.55 A) 0.1 A (0.13 A) Ipeak Pout PT Viso Topr Tstg 1.5 A Peak load current Power dissipation Total power dissipation I/O isolation voltage Ambient temperature Operating Storage AQW610S 50 mA 5V 1A 75 mW f = 100 Hz, Duty factor = 0.1% 0.3 A 600 mW 650 mW 1,500 Vrms –40 to +85°C –40 to +185°F –40 to +100°C –40 to +212°F –1– Remarks Peak AC, DC ( ): in case of using only 1a or 1b, 1 channel 100 ms (1 shot), VL = DC (Non-icing at low temperatures) ASCTB137E 201703-T GU SOP 1 Form A & 1 Form B (AQW61❍S) 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol Typical Maximum Minimum Typical Typical Maximum LED operate current Input LED reverse current LED dropout voltage AQW612S 0.9 mA 3 mA IFoff (N.O.) IFon (N.C.) 0.4 mA 0.8 mA 1.25 V (1.14 V at IF = 5 mA) 1.5 V VF Typical On resistance Condition IL = Max. IL = Max. IF = 50 mA 1Ω 18 Ω 2.5 Ω 25 Ω IF = 5 mA (N.O.) IF= 0 mA (N.C.) IL = Max. Within 1 s IF = 0 mA (N.O.) IF= 5 mA (N.C.) VL = Max. Ron Maximum Output Off state leakage current Operate time* Transfer characteristics AQW610S IFon (N.O.) IFoff (N.C.) Reverse time* I/O capacitance Initial I/O isolation resistance Maximum ILeak 1 μA Typical Maximum Typical Maximum Typical Maximum Minimum Ton (N.O.) Toff (N.C.) 0.65 ms (N.O.), 0.9 ms (N.C.) 0.28 ms (N.O.), 0.52 ms (N.C.) 3.0 ms 1.0 ms 0.08 ms (N.O.), 0.2 ms (N.C.) 0.04 ms (N.O.), 0.23 ms (N.C.) 1.0 ms 1.0 ms 0.8 pF Toff (N.O.) Ton (N.C.) Ciso 1.5 pF 1,000 MΩ Riso IF = 0 mA ➝ 5 mA IL = Max. IF = 5 mA ➝ 0 mA IL = Max. f = 1 MHz VB = 0 V 500 V DC *Operate/Reverse time 1) N.O. 2) N.C. Input Input 90% Output 10% Ton Output 10% 90% Toff Toff Ton 3. Recommended operating conditions (Ambient temperature: 25°C 77°F) Please use under recommended operating conditions to obtain expected characteristics. Item AQW612S AQW610S Symbol LED current Load voltage (Peak AC) IF VL Continuous load current IL Load voltage (Peak AC) VL Continuous load current IL Number of used channels 1ch 2ch Min. Max. Unit 5 — 30 48 mA V 0.55 0.45 280 — — 1ch 2ch 0.13 0.1 — A V A ■ These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. –2– ASCTB137E 201703-T GU SOP 1 Form A & 1 Form B (AQW61❍S) REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate time vs. ambient temperature characteristics Allowable ambient temperature: –40 to +85°C –40 to +185°F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 50 2.0 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) AQW612S (Using only 1 channel) 400 300 40 Operate time, ms 500 AQW612S (Using 2 channels) On resistance, Ω Load current, mA 600 30 AQW610S 20 1.6 1.2 AQW612S 0.8 200 100 AQW610S (Using only 1 channel) AQW610S (Using 2 channels) 0 -40 -20 0 20 40 60 10 0.4 AQW612S 0 80 85 100 -40 -20 Ambient temperature, °C AQW610S 0 0 20 40 60 80 85 Ambient temperature, °C -40 -20 0 20 40 60 4. Reverse time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED reverse current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 5 LED operate current, mA Reverse time, ms Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 0.8 0.6 0.4 AQW612S AQW610S Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 4 3 2 LED reverse current, mA 1.0 1 0.2 0 -40 -20 0 0 20 40 60 8085 100 Ambient temperature, °C 80 85 Ambient temperature, °C Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 4 3 2 1 –40 –20 0 20 40 60 0 80 85 –40 0 20 40 60 80 85 Ambient temperature, °C –20 Ambient temperature, °C 7. LED dropout voltage vs. ambient temperature characteristics 8-(1). Current vs. voltage characteristics of output at MOS portion 8-(2). Current vs. voltage characteristics of output at MOS portion LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Current, A 1.4 1.3 1.2 50mA 30mA 20mA 10mA 5mA 1.1 1.0 AQW610S 0 0.6 Between terminals 5 and 6 (N.O.) Between terminals 0.4 7 and 8 (N.C.) 140 Between terminals 120 5 and 6 (N.O.) Between terminals 100 7 and 8 (N.C.) 80 60 40 20 -3 -2.5 -2 -1.5 -1 -0.5 Current, mA LED dropout voltage, V 1.5 –40 –20 0 20 40 60 80 85 Ambient temperature, °C -1 0.5 1 1.5 2 2.5 3 -20 Voltage, V -40 -60 -80 -100 -120 -140 AQW612S 0.2 -0.5 0 0 0.5 Voltage, V 1 -0.2 -0.4 -0.6 9-(1). Off state leakage current vs. load voltage characteristics 9-(2). Off state leakage current vs. load voltage characteristics 10. Operate time vs. LED forward current characteristics Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F 10 –6 10 –9 10 –12 AQW610S 10 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) –3 10 –6 10 –9 10 –12 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) Operate time, ms Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) –3 Off state leakage current, A Off state leakage current, A 5 10 AQW612S 4 3 AQW610S 2 AQW612S 1 0 20 40 60 80 100 0 20 40 Load voltage, V 60 80 Load voltage, V –3– 100 0 0 10 20 30 40 50 LED forward current, mA 60 ASCTB137E 201703-T GU SOP 1 Form A & 1 Form B (AQW61❍S) 11. Reverse time vs. LED forward current characteristics 12. Output capacitance vs. applied voltage characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 0 mA (N.O.), 5 mA (N.C.); Frequency: 1 MHz; Ambient temperature: 25°C 77°F 0.5 Reverse time, ms 0.4 0.3 AQW610S 0.2 AQW612S 0.1 0 Output capacitance, pF 500 Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) Between terminals 5 and 6(N.O.) Between terminals 7 and 8(N.C.) 400 300 200 AQW612S 100 0 10 20 30 40 50 LED forward current, mA 60 0 AQW610S 0 10 20 30 40 50 60 Applied voltage, V –4– ASCTB137E 201703-T