AQW654AX

Both 1 Form A and 1 Form B contacts incorporated in a compact DIP8-pin with low on-resistance 6.4 .252 3.9 .154 9.78 .385 6.4 .252 3.6 .142 9.78 .385 (Height includes standoff) mm inch 1 N.C. 8 2 7 3 6 5 4 N.O. RoHS compliant HE 1 Form A & 1 Form B (AQW654) FEATURES TYPICAL APPLICATIONS 1. Applicable for 1 Form A and 1 Form B use as well as two independent 1 Form A and 1 Form B use 2. Controls low-level analog signals PhotoMOS feature extremely low closedcircuit offset voltage to enable control of low-level analog signals without distortion. 3. High sensitivity and low onresistance Can control max. 0.16 A load current with 5 mA input current. Low on-resistance of max. 11 Ω. (in case of using only 1 channel) 4. Low-level off state leakage current of max. 1 μA • High-speed inspection machines • Data communication equipment • Telephone equipment • Sensing equipment TYPES Part No. Output rating* Package Load voltage Load current 400 V 120 mA AC/DC dual use Through hole terminal Tape and reel packing style Picked from the Picked from the 1/2/3/4-pin side 5/6/7/8-pin side Tube packing style DIP8-pin AQW654 Packing quantity Surface-mount terminal AQW654A AQW654AX AQW654AZ Tube Tape and reel 1 tube contains: 50 pcs. 1 batch contains: 500 pcs. 1,000 pcs *Indicate the peak AC and DC values. Note: The surface mount terminal indicator “A” and the packing style indicator “X” or “Z” are not marked on the device. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Input Output Item LED forward current LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Symbol IF VR IFP Pin VL AQW654(A) 50 mA 5V 1A 75 mW 400 V Continuous load current IL 0.12A (0.16 A) Ipeak Pout PT Viso 0.36 A 800 mW 850 mW 1,500 Vrms –40 to +85°C –40 to +185°F –40 to +100°C –40 to +212°F Peak load current Power dissipation Total power dissipation I/O isolation voltage Ambient temperature Operating Storage Topr Tstg –1– Remarks f = 100 Hz, Duty factor = 0.1% Peak AC, DC ( ): in case of using only 1 channel) 100 ms (1 shot), VL = DC (Non-icing at low temperatures) ASCTB60E 201703-T HE 1 Form A & 1 Form B (AQW654) 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Typical Maximum Minimum Typical Typical Maximum LED operate current Input LED reverse current LED dropout voltage Symbol AQW654(A) IFon (N.O.) IFoff (N.C.) 0.9 mA 3 mA IFoff (N.O.) IFon (N.C.) 0.4 mA 0.8 mA 1.25 V (1.14 V at IF = 5 mA) 1.5 V VF Ron Operate time* Transfer characteristics Reverse time* I/O capacitance Initial I/O isolation resistance IL = Max. IF = 50 mA IF = 5 mA (N.O.) IF = 0 mA (N.C.) IL = Max. Within 1 s IF = 0 mA (N.O.) IF = 5 mA (N.C.) VL = Max. 16 Ω Maximum Output Off state leakage current IL = Max. 11 Ω Typical On resistance Condition Maximum ILeak 1 μA Typical Maximum Typical Maximum Typical Maximum Minimum Ton (N.O.) Toff (N.C.) 0.8 ms (N.O.) 1.2 ms (N.C.) 2 ms 0.04 ms (N.O.) 0.36 ms (N.C.) 1 ms 0.8 pF Toff (N.O.) Ton (N.C.) Ciso IF = 0 mA ➝ 5 mA IL = Max. IF = 5 mA ➝ 0 mA IL = Max. f = 1 MHz VB = 0 V 1.5 pF 1,000 MΩ Riso 500 V DC *Operate/Reverse time 1) N.O. 2) N.C. Input Input 90% Output 10% Ton Output 10% 90% Toff Toff Ton 3. Recommended operating conditions (Ambient temperature: 25°C 77°F) Please use under recommended operating conditions to obtain expected characteristics. Item AQW654(A) Symbol LED current Load voltage (Peak AC) IF VL Continuous load current IL Number of used channels 1ch 2ch Min. Max. Unit 5 — 30 320 mA V — 0.16 0.12 A ■ These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. –2– ASCTB60E 201703-T HE 1 Form A & 1 Form B (AQW654) REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate time vs. ambient temperature characteristics Allowable ambient temperature: –40 to +85°C –40 to +185°F When using 2 channels Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) 250 4 20 Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) 18 150 100 16 Operate (OFF) time, ms On resistance, Ω Load current, mA 200 14 12 10 8 6 50 3 2 1 4 Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) 2 0 0 –40 –20 –40 0 20 40 60 8085 100 Ambient temperature, °C –20 0 0 20 40 60 8085 Ambient temperature, °C –40 –20 0 20 40 60 8085 Ambient temperature, °C 4. Reverse time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED reverse current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) Load voltage: 400 V (DC); Continuous load current: 120 mA (DC) 4 1.5 1.0 0.5 0 –40 –20 3 2 1 0 0 20 40 60 8085 Ambient temperature, °C 4 Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) LED reverse (ON) current, mA Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) LED operate (OFF) current, mA Reverse (ON) time, ms 2.0 –40 –20 Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) 3 2 1 0 0 20 40 60 8085 Ambient temperature, °C –40 –20 0 20 40 60 8085 Ambient temperature, °C 7. LED dropout voltage vs. ambient temperature characteristics 8. Current vs. voltage characteristics of output at MOS portion 9. Off state leakage current vs. load voltage characteristics LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25°C 77°F Current, mA LED dropout voltage, V 100 1.3 1.2 –3 50mA 30mA 20mA 1.1 –2 50 –1 0 1 2 Voltage, V 3 –50 10mA 5mA –100 Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) –150 1.0 0 –40 –20 Off state leakage current, A 150 1.4 0 20 40 60 8085 Ambient temperature, °C Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) 10–3 10–6 10–9 10–12 0 20 40 60 Load voltage, V 80 100 10. Operate time vs. LED forward current characteristics 11. Reverse time vs. LED forward current characteristics 12. Output capacitance vs. applied voltage characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: 400 V (DC); Continuous load current: 120 mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 1.2 5 3 2 1 0 Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) 1.0 Output capacitance, pF Reverse (ON) time, ms Operate (OFF) time, ms 4 200 Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) Across terminals 5 and 6 (N.O.) Across terminals 7 and 8 (N.C.) 0.8 0.6 0.4 150 100 50 0.2 0 10 20 30 40 50 LED forward current, mA 0 0 10 20 30 40 50 LED forward current, mA –3– 0 0 10 20 30 40 50 60 Applied voltage, V ASCTB60E 201703-T