AQY210S1Y

GU PhotoMOS (AQY21❍S) TESTING Super miniature design, SOP(1 Form A) 4-pin type Controls load voltage 60V, 350V, 400V (W)4.3 × (L)4.4 × (H)2.1 mm (W).169 × (L).173 × (H).083 inch —approx. 70% of the volume and 70% of the footprint size of SO package 6-pin type PhotoMOS Relays. 4.4 .173 2.1 .083 (6-pin) mm inch 4 2 3 (4-pin) Approx. 70% Volume m 1 3. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 4. Low-level off state leakage current In contrast to the SSR with an off state leakage current of several milliamperes, the PhotoMOS relay features a very small off state leakage current of typ. 100 pA (AQY214S) even with the rated load voltage of 400 V. Approx. 70% co 4.3 .169 GU PhotoMOS (AQY21❍S) Footprint TYPICAL APPLICATIONS s. FEATURES 2. Tape and reel The device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automatic insertion machines. • Telecommunications (PC, Electronic Notepad) • Measuring and Testing equipment • Factory Automation Equipment • Security equipment • High speed inspection machines po ne nt 1. SO package 4-Pin type in super miniature design The device comes in a super-miniature SO package 4-Pin type measuring AC/DC type Output rating* Load current 500 mA 120 mA 100 mA in ec Load voltage 60 V 350 V 400 V om TYPES Part No. Picked from the 1/2-pin side Picked from the 3/4-pin side AQY212SX AQY212SZ AQY210SX AQY210SZ AQY214SX AQY214SZ Packing quantity in tape and reel 1,000 pcs. RATING on l * Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suf x “X” or “Z” is not needed when ordering; Tube: 100 pcs.; Case: 2,000 pcs.) (2) For space reasons, the top two letters of the product number “AQY” and “S” are omitted on the product seal. The package type indicator “X” and “Z” are omitted from the seal. (Ex. the label for product number AQY210S is 210). AC/DC type 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current Input Output Symbol IF LED reverse voltage Peak forward current Power dissipation Load voltage (peak AC) Continuous load current (peak AC) Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperature Operating limits Storage VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQY212S AQY210S AQY214S 50 mA 5V 1A 75 mW 60 V 350 V 400 V 0.5 A 0.12 A 0.1 A 1.5 A 0.3 A 0.24 A 300 mW 350 mW 1,500 V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. Remarks f = 100 Hz, Duty factor = 0.1% 100ms (1 shot), VL = DC Non-condensing at low temperatures GU PhotoMOS (AQY21❍S) 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Symbol Typical Maximum Minimum Typical Typical Maximum Typical LED operate current Input LED turn off current LED dropout voltage On resistance Output Maximum Off state leakage current Maximum Typical Maximum Typical Maximum Turn on time* Transfer characteristics Turn off time* IFon IFoff VF Ron AQY212S AQY210S AQY214S 0.9 mA 3 mA 0.4 mA 0.85 mA 1.25 V (1.14 V at IF = 5 mA) 1.5 V 0.83 Ω 17 Ω 25 Ω 2.5 Ω 25 Ω IL = Max. IL = Max. IF = 50 mA IF = 5 mA IL = Max. Within 1 s on time IF = 0 mA VL = Max. 35 Ω 1 µA ILeak Ton Remarks 0.65 ms 2 ms 0.23 ms 0.5 ms 0.04 ms 0.2 ms Toff I/O capacitance Maximum Ciso 1.5 pF Initial I/O isolation resistance Minimum Riso 1,000 MΩ IF = 5 mA IL = Max. IF = 5 mA IL = Max. f = 1 MHz VB = 0 V 500 V DC co Note: Recommendable LED forward current IF = 5mA. 0.21 ms 0.5 ms m Item s. *Turn on/Turn off time nt Input Output ne 90% 10% po Toff Ton on l in ec om ■ ■ ■ REFERENCE DATA 1. Load current vs. ambient temperature characteristics Allowable ambient temperature: –40°C to +85°C –40°F to +185°F 2. On resistance vs. ambient temperature characteristics Measured portion: between terminals 3 and 4; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 700 3.0 300 AQY214S 40 30 AQY210S 20 0 –40 –20 10 20 40 60 8085 100 Ambient temperature, °C 0 1.5 AQY212S AQY214S AQY210S 0.5 AQY214S 0 2.0 1.0 200 AQY210S 2.5 Turn on time, ms On resistance, Ω Load current, mA AQY212S 400 100 LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 50 600 500 3. Turn on time vs. ambient temperature characteristics AQY212S –40 –20 0 20 40 60 80 85 Ambient temperature, °C 0 –40 –20 All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. 0 20 40 60 Ambient temperature, °C 8085 GU PhotoMOS (AQY21❍S) 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) 0.4 0.3 0.2 AQY212S 5 LED turn off current, mA LED operate current, mA 4 3 2 4 3 2 1 0.1 AQY214S, AQY210S 0 20 40 60 0 8085 –40 –20 Ambient temperature, °C 0 20 7. LED dropout voltage vs. ambient temperature characteristics Current, mA 1.4 1.3 –40 –20 80 60 40 0 20 40 60 80 85 Ambient temperature, °C 8-(2). Current vs. voltage characteristics of output at MOS portion Measured portion: between terminals 3 and 4; Ambient temperature: 25°C 77°F 0.6 –1 1 2 3 4 5 –20 Voltage, V –40 –0.5 0.4 AQY212S 0.2 0 nt 50mA 30mA 20mA 10mA 5mA AQY210S AQY214S 100 20 –5 –4 –3 –2 –1 0 –0.2 0.5 Voltage, V 1 –60 ne 1.0 0 8085 Measured portion: between terminals 3 and 4; Ambient temperature: 25°C 77°F 1.5 1.1 60 8-(1). Current vs. voltage characteristics of output at MOS portion Sample: All types; LED current: 5 to 50 mA 1.2 40 Ambient temperature, °C Current, A -20 m -40 co 0 1 s. Turn off time, ms Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) 5 0.5 LED dropout voltage, V 6. LED turn off current vs. ambient temperature characteristics –0.4 –80 –100 –20 0 20 40 60 8085 Ambient temperature, °C 9. Off state leakage current vs. load voltage characteristics Measured portion: between terminals 3 and 4; Ambient temperature: 25°C 77°F –0.6 po –40 10. Turn on time vs. LED forward current characteristics om 0 Measured portion: between terminals 3 and 4; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F 11. Turn off time vs. LED forward current characteristics Measured portion: between terminals 3 and 4; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25°C 77°F 0.12 0.8 0.6 0.08 0.06 AQY214S AQY210S 0.04 0.4 AQY214S, AQY210S 0 20 40 60 80 0.02 0.2 AQY212S 10–12 100 0 AQY214S, AQY210S 0 10 20 30 40 50 60 LED forward current, mA Load voltage, V 12. Output capacitance vs. applied voltage characteristics Measured portion: between terminals 3 and 4; Frequency: 1 MHz; Ambient temperature: 25°C 77°F 200 Output capacitance, pF AQY212S 0.10 AQY212S Turn off time, ms 10 –9 1.0 Turn on time, ms –6 in ec 10 on l Off state leakage current, A 1.2 10–3 150 100 AQY212S AQY214S, AQY210S 50 0 0 10 20 30 40 50 Applied voltage, V All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd. 0 0 10 20 30 40 50 LED forward current, mA 60