AQY2C1R3PZ

Super miniature TSON package, Capacitor Coupled isolation New 0.8 .031 mm inch 4 Control circuit 2 Rectifier circuit Oscillation circuit 1 (AQY2C❍❍❍P) 2. Low current consumption (input current: Max. 0.2 mA) 3. Guaranteed performance at high temperature (Max. 105°C 221°F) 4. Voltage driving type (3 V to 5 V) 5. Low on resistance and low output capacitance available 6. Input current of CC type is less than half of previous products, contributing energy saving of device and increases drivability Comparison with previous products 1.95 .077 1.80 .071 CC TSON C×R 3 Input current/ LED current RoHS compliant Minimum Typical Maximum CC type (AQY2C1R2P) – 0.09 mA*1 0.2 mA*1 HS type (AQY232S) 2 mA*2 GU type (AQY212S) 5 mA*2 – 30 mA*2 Notes: *1. VIN = 5 V *2. Recommend operating condition. TYPICAL APPLICATIONS 1. Measuring equipment: IC tester, probe cards, board tester and other testing equipment 2. Telecommunication equipment 3. Security, voltage operating equipment application for requiring low electricity consumption. Security equipment: Security camera, intruder detection Disaster-preventing equipment: Fire alarm, smoke, heat and fire detectors Industrial equipment: Electric measuring equipment, Industrial measuring equipment Electric meter, Gas meter and other meters. FEATURES 1. Super miniature TSON package contributes to space savings and high density mounting. 3.5 mm2 mounting area achieved. Approx. 46 % less than previous product (SON type). New 100% 44% SOP 4pin SSOP 22% 16% 12% SON VSSOP TSON *Does not support automotive application. TYPES Type AC/DC dual use Low on resistance Low output capacitance Output rating*1 Load voltage Load current Part No. (Tape and reel packing style)*2 Picked from the 1 and 2-pin side Picked from the 3 and 4-pin side 30 V 0.75 A AQY2C1R6PX AQY2C1R6PZ 40 V 0.3 A AQY2C1R2PX AQY2C1R2PZ New 60 V New 40 V New 100 V 0.3 A AQY2C2R2PX AQY2C2R2PZ 0.1 A AQY2C1R3PX AQY2C1R3PZ 0.12 A AQY2C5R3PX AQY2C5R3PZ Packing quantity in the tape and reel 3,500 pcs. Notes: *1. Indicate the peak AC and DC values. *2. Only tape and reel package is available. For space reasons, only “1R6”, “1R2”, “2R2”, “1R3” or “5R3” is marked on the product as the part number. –1– ASCTB359E 201805-T CC TSON C×R (AQY2C❍❍❍P) RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item Symbol Input voltage Input reverse voltage Power dissipation Load voltage (peak AC) Continuous load current Output side Peak load current Power dissipation Total power dissipation I/O isolation voltage Operating Ambient temperature Storage VIN VRIN Pin VL IL Ipeak Pout PT Viso Topr Tstg Input side Low on resistance Low output capacitance Remarks AQY2C1R6P AQY2C1R2P AQY2C2R2P AQY2C1R3P AQY2C5R3P 5.5 V 0.2 V 1.2 mW 30 V 40 V 60 V 40 V 100 V 0.75 A 0.3 A 0.3 A 0.1 A 0.12 A Peak AC, DC 1.5 A 0.75 A 0.9 A 0.3 A 0.3 A 100 ms (1shot), VL = DC 250 mW 250 mW 200 Vrms –40 to +105°C –40 to +221°F (Non-icing at low temperatures) –40 to +125°C –40 to +257°F 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Input Operate voltage Turn off voltage Input current Symbol Typ. Max. Min. Typ. Typ. Max. Typ. Max. Low on resistance Low output capacitance AQY2C1R6P AQY2C1R2P AQY2C2R2P AQY2C1R3P AQY2C5R3P 1.7 V VFon 2.0 V 2.5 V VFoff 1.5 V 1.4 V 1.5 V 0.04 mA 0.1 mA 0.09 mA 0.2 mA IIN VIN = 5 V 1Ω 12.5 Ω 9.5 Ω — — — — — Typ. 0.2 Ω 0.8 Ω 0.9 Ω 10.5 Ω 9Ω Max. 0.4 Ω 15 Ω 14 Ω 1.2 pF 2 pF 5.8 pF 8 pF Ron Output capacitance Typ. Max. Cout Off state leakage current Max. ILeak 40 pF 100 pF 14.5 pF 18 pF 27 pF 40 pF 10 nA Typ. 0.25 ms Max. Turn on time* 1.5 Ω 0.15 ms 0.18 ms 1 ms 0.12 ms Max. 0.08 ms 0.5 ms Typ. 0.06 ms Max. Turn off time* 0.06 ms 0.04 ms 0.02 ms 0.06 ms 0.2 ms 0.5 ms 0.01 ms 0.03 ms 0.1 ms 0.2 ms 0.06 ms 0.01 ms 0.02 ms 0.2 ms 0.1 ms 0.2 ms 0.02 ms 0.04 ms 0.2 ms 0.5 ms Toff Typ. 0.1 ms Max. Typ. Max. 0.06 ms 0.1 ms 0.5 ms 1.2 pF 3 pF Ciso AQY2C1R6P: VIN = 3.3 V, IL = 750 mA AQY2C1R2P: VIN = 3.3 V, IL = 300 mA AQY2C2R2P: VIN = 3.3 V, IL = 300 mA AQY2C1R3P: VIN = 3.3 V, IL = 80 mA AQY2C5R3P VIN = 3.3 V, IL = 80 mA Within 1 s on time AQY2C1R6P: VIN = 5 V, IL = 750 mA AQY2C1R2P: VIN = 5 V, IL = 300 mA AQY2C2R2P: VIN = 5 V, IL = 300 mA AQY2C1R3P: VIN = 5 V, IL = 80 mA AQY2C5R3P: VIN = 5 V, IL = 80 mA Within 1 s on time VIN = 0 V, f = 1 MHz, VB = 0 V VIN = 0 V, VL = Max. Ton Typ. VIN / t 100 mV/ms AQY2C1R6P: IL = 100 mA AQY2C1R2P: IL = 300 mA AQY2C2R2P: IL = 300 mA AQY2C1R3P: IL = 80 mA AQY2C5R3P: IL = 80 mA VIN = 3.3 V 0.9 Ω Max. Output 2.2V 0.22 Ω On resistance Transfer characteristics 1.7 V 0.5 V Typ. I/O capacitance 1.8 V Condition AQY2C1R6P: VIN = 3.3 V, VL = 10 V, RL = 100 Ω AQY2C1R2P: VIN = 3.3 V, VL = 10 V, RL = 100 Ω AQY2C2R2P: VIN = 3.3 V, VL = 10 V, RL = 100 Ω AQY2C1R3P: VIN = 3.3 V, VL = 10 V, RL = 125 Ω AQY2C5R3P: VIN = 3.3 V, VL = 10 V, RL = 125 Ω AQY2C1R6P: VIN = 5 V, VL = 10 V, RL = 100 Ω AQY2C1R2P: VIN = 5 V, VL = 10 V, RL = 100 Ω AQY2C2R2P: VIN = 5 V, VL = 10 V, RL = 100 Ω AQY2C1R3P: VIN = 5 V, VL = 10 V, RL = 125 Ω AQY2C5R3P: VIN = 5 V, VL = 10 V, RL = 125 Ω AQY2C1R6P: VIN = 3.3 V, VL = 10 V, RL = 100 Ω AQY2C1R2P: VIN = 3.3 V, VL = 10 V, RL = 100 Ω AQY2C2R2P: VIN = 3.3 V, VL = 10 V, RL = 100 Ω AQY2C1R3P: VIN = 3.3 V, VL = 10 V, RL = 125 Ω AQY2C5R3P: VIN = 3.3 V, VL = 10 V, RL = 125 Ω AQY2C1R6P: VIN =5 V, VL = 10 V, RL = 100 Ω AQY2C1R2P: VIN =5 V, VL = 10 V, RL = 100 Ω AQY2C2R2P: VIN =5 V, VL = 10 V, RL = 100 Ω AQY2C1R3P: VIN =5 V, VL = 10 V, RL = 125 Ω AQY2C5R3P: VIN =5 V, VL = 10 V, RL = 125 Ω f = 1 MHz, VB = 0 V *Turn on/Turn off time Input 90% 10% Output Ton Toff –2– ASCTB359E 201805-T CC TSON C×R (AQY2C❍❍❍P) 3. Recommended operating conditions (Ambient temperature: 25°C 77°F) Please use under recommended operating conditions to obtain expected characteristics. AQY2C1R6P AQY2C1R2P AQY2C2R2P AQY2C1R3P AQY2C5R3P Item Input voltage Load voltage (Peak AC) Continuous load current Load voltage (Peak AC) Continuous load current Load voltage (Peak AC) Continuous load current Load voltage (Peak AC) Continuous load current Load voltage (Peak AC) Continuous load current Symbol VIN VL IL VL IL VL IL VL IL VL IL Min. 3 — — — — — — — — — — Max. 5 15 0.75 15 0.3 30 0.3 15 0.1 50 0.12 Unit V V A V A V A V A V A ■ These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2-(1). On resistance vs. ambient temperature characteristics 2-(2). On resistance vs. ambient temperature characteristics Allowable ambient temperature: –40 to +105°C –40 to +221°F Measured portion: between terminals 3 and 4, Input voltage: 5V Load voltage: 10V (DC) Continuous load current: 750mA (DC) AQY2C1R6P 300mA (DC) AQY2C1R2P, AQY2C2R2P Measured portion: between terminals 3 and 4, Input voltage: 5V Load voltage: 10V (DC) Continuous load current: 80mA (DC) AQY2C1R3P, AQY2C5R3P AQY2C1R6P 600 400 200 AQY2C1R2P AQY2C2R2P 2.5 25 2 20 1.5 AQY2C2R2P 1 On resistance,  800 On resistance,  Load current, mA 1000 AQY2C1R3P 15 10 AQY2C5R3P AQY2C1R2P 0.5 5 AQY2C5R3P AQY2C1R6P AQY2C1R3P 0 105 -40 -20 0 20 40 60 80 100 120 Ambient temperature, ºC 0 -40 -20 0 105 0 20 40 60 80 100 Ambient temperature, ºC -40 -20 105 0 20 40 60 80 100 Ambient temperature, ºC 3-(2). Turn on time vs. ambient temperature characteristics 4-(1). Turn off time vs. ambient temperature characteristics Measured portion: between terminals 3 and 4, Input voltage: 5V Load voltage: 10V (DC) Continuous load current: 100mA Measured portion: between terminals 3 and 4, Input voltage: 5V Load voltage: 10V (DC) Continuous load current: 80mA Measured portion: between terminals 3 and 4, Input voltage: 5V Load voltage: 10V (DC) Continuous load current: 100mA 0.1 0.5 0.4 0.08 0.4 0.3 0.2 Turn off time, ms 0.5 Turn on time, ms Turn on time, ms 3-(1). Turn on time vs. ambient temperature characteristics 0.06 0.04 AQY2C2R2P AQY2C1R6P 0.1 AQY2C5R3P 0.02 AQY2C1R3P 0.3 0.2 AQY2C1R2P AQY2C1R2P 0 -40 -20 105 0 20 40 60 80 100 Ambient temperature, ºC AQY2C1R6P AQY2C2R2P 0.1 0 -40 -20 105 0 20 40 60 80 100 Ambient temperature, ºC –3– 0 -40 -20 105 0 20 40 60 80 100 Ambient temperature, ºC ASCTB359E 201805-T CC TSON C×R (AQY2C❍❍❍P) 4-(2). Turn off time vs. ambient temperature characteristics 5. Operate voltage vs. ambient temperature characteristics 6. Turn off voltage vs. ambient temperature characteristics Measured portion: between terminals 3 and 4, Input voltage: 5V Load voltage: 10V (DC) Continuous load current: 80mA Measured portion: between terminals 3 and 4 Load voltage: 10V (DC) Continuous load current: 100mA (DC) AQY2C1R6P 300mA (DC) AQY2C1R2P, AQY2C2R2P 80mA (DC) AQY2C1R3P, AQY2C5R3P Measured portion: between terminals 3 and 4 Load voltage: 10V (DC) Continuous load current: 100mA (DC) AQY2C1R6P 300mA (DC) AQY2C1R2P, AQY2C2R2P 80mA (DC) AQY2C1R3P, AQY2C5R3P 2.5 Operate voltage, V 0.15 0.1 0.05 AQY2C5R3P Turn off voltage, V 2.5 0.2 Turn off time, ms 3 3 0.25 AQY2C1R3P 2 AQY2C5R3P 1.5 AQY2C1R6P AQY2C2R2P AQY2C1R2P 2 AQY2C5R3P AQY2C1R3P AQY2C1R6P 1.5 1 1 0.5 0.5 AQY2C2R2P AQY2C1R2P AQY2C1R3P 0 0 105 0 20 40 60 80 100 Ambient temperature, ºC -40 -20 -40 -20 0 105 0 20 40 60 80 100 Ambient temperature, ºC 105 0 20 40 60 80 100 Ambient temperature, ºC -40 -20 7.Input current vs. ambient temperature characteristics 8-(1). Current vs. voltage characteristics of output at MOS portion 8-(2). Current vs. voltage characteristics of output at MOS portion Sample: All types Input voltage: 3.3V, 5V Measured portion: between terminals 3 and 4 Input voltage: 5V Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Input voltage: 5V Ambient temperature: 25°C 77°F 0.2 0.15 250 0.8 Current, mA 1 Current, A Input current, mA 0.25 AQY2C1R6P 0.6 0.4 AQY2C1R2P 0.2 150 AQY2C5R3P 100 AQY2C1R3P 50 AQY2C2R2P -0.5 -0.4 -0.3 -0.2 -0.1 200 -0.5 -0.3 -0.2 -0.1 0.1 0.2 0.3 0.4 0.5 5V 0.1 -0.2 0.1 Voltage, V -50 -0.4 -100 -0.6 -150 -0.8 -200 -1 -250 0.2 0.3 0.5 Voltage, V 3.3V 0.05 0 105 0 20 40 60 80 100 Ambient temperature, °C -40 -20 9. Input current vs. input voltage characteristics Sample: All types Ambient temperature: 25°C 77°F (Recommended input voltage: 3 to 5 V) 10-(1). Off state leakage current vs. load voltage characteristics 10-(2). Off state leakage current vs. load voltage characteristics Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 0.2 0.15 0.1 10-3 10-6 10-9 AQY2C1R6P AQY2C2R2P Off state leakage current, A Off state leakage current, A Input current, mA 0.25 10-3 10-6 10-9 AQY2C5R3P 0.05 AQY2C1R2P 10-12 10-12 AQY2C1R3P 0 2 3 4 5 Input voltage, V 6 0 10 20 30 40 50 Load voltage, V –4– 60 0 20 40 60 80 Load voltage, V 100 ASCTB359E 201805-T CC TSON C×R (AQY2C❍❍❍P) 11-(2). Turn on time vs. input voltage characteristics 12-(1). Turn off time vs. input voltage characteristics Measured portion: between terminals 3 and 4, Load voltage: 10V (DC) Continuous load current: 100mA (DC) Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4, Load voltage: 10V (DC) Continuous load current: 80mA (DC) Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4, Load voltage: 10V (DC) Continuous load current: 100mA (DC) Ambient temperature: 25°C 77°F 0.25 0.5 0.8 0.2 0.4 0.6 0.4 Turn off time, ms 1 Turn on time, ms Turn on time, ms 11-(1). Turn on time vs. input voltage characteristics 0.15 AQY2C5R3P 0.1 0.3 0.2 AQY2C1R6P AQY2C1R6P AQY2C2R2P AQY2C2R2P 0.1 0.05 0.2 AQY2C1R2P 0 2 3 4 5 Input voltage, V 0 2 6 AQY2C1R2P AQY2C1R3P 3 4 5 Input voltage, V 0 2 6 3 4 5 Input voltage, V 6 12-(2). Turn off time vs. input voltage characteristics 13-(1). Output capacitance vs. applied voltage characteristics 13-(2). Output capacitance vs. applied voltage characteristics Measured portion: between terminals 3 and 4, Load voltage: 10V (DC) Continuous load current: 80mA (DC) Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Frequency: 1MHz (30mVrms), Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Frequency: 1MHz (30mVrms), Ambient temperature: 25°C 77°F Output capacitance, pF Turn off time, ms 0.2 0.15 0.1 AQY2C5R3P 10 40 30 20 AQY2C1R6P 10 0.05 Output capacitance, pF 50 0.25 8 6 4 AQY2C1R3P AQY2C1R2P AQY2C1R3P 3 4 5 Input voltage, V 0 0 6 10 20 30 40 50 40 Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4, Input voltage: 5V Ambient temperature: 25°C 77°F 60 AQY2C1R3P Insertion loss, dB 80 80 100 16.-(1) On resistance distribution Sample: AQY2C1R6P, Measured portion: between terminals 3 and 4 Input voltage: 5V, Continuous load current: 750mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F 2 100 60 Applied voltage, V 15. Insertion loss vs. frequency characteristic (50Ω impedance) 40 20 Applied voltage, V 14. Isolation vs. frequency characteristic (50Ω impedance) Isolation, dB 0 0 60 50 40 1.5 1 AQY2C1R3P Quantity, n 0 2 AQY2C5R3P 2 AQY2C2R2P 30 20 AQY2C5R3P AQY2C5R3P AQY2C1R2P AQY2C2R2P AQY2C1R6P 20 0 5 10 106 107 Frequency, Hz 108 0.5 10 AQY2C1R6P AQY2C1R2P AQY2C2R2P 0 4 10 105 –5– 106 Frequency, Hz 107 0 0.14 0.16 0.18 0.20 0.22 On resistance, Ω 0.24 ASCTB359E 201805-T CC TSON C×R (AQY2C❍❍❍P) 16.-(3) On resistance distribution 16.-(4) On resistance distribution Sample: AQY2C1R2P, Measured portion: between terminals 3 and 4 Input voltage: 5V, Continuous load current: 300mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F Sample: AQY2C2R2P, Measured portion: between terminals 3 and 4 Input voltage: 5V, Continuous load current: 300mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F Sample: AQY2C1R3P, Measured portion: between terminals 3 and 4 Input voltage: 5V, Continuous load current: 80mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F 50 50 40 40 40 30 Quantity, n 50 Quantity, n Quantity, n 16.-(2) On resistance distribution 30 30 20 20 20 10 10 10 0 0.64 0.68 0.72 0.76 0.80 On resistance, Ω 0 0.80 0.84 0.84 0.88 0.92 0.96 On resistance,  0 8.0 1.00 8.8 9.6 10.4 11.2 On resistance,  17.-(1) Turn on time distribution 17.-(2) Turn on time distribution Sample: AQY2C5R3P, Measured portion: between terminals 3 and 4 Input voltage: 5V, Continuous load current: 80mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F Sample: AQY2C1R6P, Input voltage: 5V Load voltage: 10V (DC), Continuous load current: 100mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F Sample: AQY2C1R2P, Input voltage: 5V Load voltage: 10V (DC), Continuous load current: 100mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F 50 50 40 40 40 30 Quantity, n 50 Quantity, n Quantity, n 16.-(5) On resistance distribution 30 30 20 20 20 10 10 10 0 6.0 6.8 7.6 8.4 9.2 On resistance,  0 0 10.0 0.04 0.08 0.12 0.16 Turn on time, ms 0 0.03 0.2 0.04 0.05 0.06 0.07 Turn on time, ms 17.-(4) Turn on time distribution 17.-(5) Turn on time distribution Sample: AQY2C2R2P, Input voltage: 5V Load voltage: 10V (DC), Continuous load current: 100mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F Sample: AQY2C1R3P, Input voltage: 5V Load voltage: 10V (DC), Continuous load current: 80mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F Sample: AQY2C5R3P, Input voltage: 5V Load voltage: 10V (DC), Continuous load current: 80mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F 50 50 40 40 40 Quantity, n 50 Quantity, n Quantity, n 17.-(3) Turn on time distribution 30 30 20 20 10 10 10 0.06 0.08 0.1 0.12 Turn on time, ms 0.14 0 0 0.01 0.02 0.03 0.04 Turn on time, ms –6– 0.05 0.08 30 20 0 0.04 12.0 0 0 0.01 0.02 0.03 0.04 Turn on time, ms 0.05 ASCTB359E 201805-T CC TSON C×R (AQY2C❍❍❍P) 18.-(2) Turn off time distribution 18.-(3) Turn off time distribution Sample: AQY2C1R6P, Input voltage: 5V Load voltage: 10V (DC), Continuous load current: 100mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F Sample: AQY2C1R2P, Input voltage: 5V Load voltage: 10V (DC), Continuous load current: 100mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F Sample: AQY2C2R2P, Input voltage: 5V Load voltage: 10V (DC), Continuous load current: 100mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F 50 50 40 40 40 30 Quantity, n 50 Quantity, n Quantity, n 18.-(1) Turn off time distribution 30 30 20 20 20 10 10 10 0 0 0.04 0.08 0.12 0.16 Turn off time, ms 0 0.03 0.2 0.04 0.05 0.06 0.07 Turn off time, ms 0 0 0.08 0.04 0.08 0.12 0.16 Turn off time, ms 18.-(5) Turn off time distribution 19.-(1) Operate voltage distribution Sample: AQY2C1R3P, Input voltage: 5V Load voltage: 10V (DC), Continuous load current: 80mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F Sample: AQY2C5R3P, Input voltage: 5V Load voltage: 10V (DC), Continuous load current: 80mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F Sample: AQY2C1R6P, Load voltage: 10V (DC) Continuous load current: 100mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F 50 50 40 40 40 30 Quantity, n 50 Quantity, n Quantity, n 18.-(4) Turn off time distribution 30 30 20 20 20 10 10 10 0 0 0.01 0.02 0.03 0.04 Turn off time, ms 0 0 0.05 0.02 0.04 0.06 0.08 Turn off time, ms 0 1.4 0.1 1.6 1.8 2 2.2 Operate voltage, V 2.4 19.-(3) Operate voltage distribution 19.-(4) Operate voltage distribution Sample: AQY2C1R2P, Load voltage: 10V (DC) Continuous load current: 300mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F Sample: AQY2C2R2P, Load voltage: 10V (DC) Continuous load current: 300mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F Sample: AQY2C1R3P, Load voltage: 10V (DC) Continuous load current: 80mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F 50 50 40 40 40 30 Quantity, n 50 Quantity, n Quantity, n 19.-(2) Operate voltage distribution 30 30 20 20 20 10 10 10 0 1.4 1.6 1.8 2 2.2 Operate voltage, V 2.4 0 1.4 1.6 1.8 2 2.2 Operate voltage, V –7– 2.4 0 1.4 1.6 1.8 2 2.2 Operate voltage, V 2.4 ASCTB359E 201805-T CC TSON C×R (AQY2C❍❍❍P) 19.-(5) Operate voltage distribution Sample: AQY2C5R3P, Load voltage: 10V (DC) Continuous load current: 80mA (DC) n: 50 pcs., Ambient temperature: 25°C 77°F 50 Quantity, n 40 30 20 10 0 1.4 1.6 1.8 2 2.2 Operate voltage, V 2.4 DIMENSIONS (mm inch) The CAD data of the products with a mark can be downloaded from: http://industrial.panasonic.com/ac/e/ External dimensions Recommended mounting pad (Top view) 1.95 .077 1.025 .040 0.60 .024 0.513 .020 0.95 .037 1.80 .071 1 Input: DC+ 2 Input: DC− 3 Output: AC/DC 4 Output: AC/DC 0.80 .031 0.575 .023 0.60 .024 0.40 .016 0.75 .030 0.75 .030 1.50 .059 Tolerance: ±0.1 ±.004 10 0. C 0.30 .012 .0 04 0.40 .016 1.50 .059 1 0.75 .030 2 4 0.65 .026 0.475 .019 3 0.775 .031 1.025 .040 General tolerance: ±0.2 ±.008 SCHEMATIC AND WIRING DIAGRAMS VIN: Input voltage, IIN: Input current, VL: Load voltage, IL: Load current Output configuration Control circuit 2 Rectifier circuit 1 Oscillation circuit Schematic Load type Connection Wiring diagram 4 1a AC/DC — VIN 1 4 2 3 IIN 3 4 IL VL (AC,DC) Load IL VL (AC,DC) 3 Load –8– ASCTB359E 201805-T CC TSON C×R (AQY2C❍❍❍P) Cautions for Use For cautions for general use, please read “PhotoMOS® cautions for Use” at Automation Control WEB site (as described in footer of catalog). CC TSON C×R Cautions for Use 1. Derating design Derating is a significant factor for reliable design and product life. Even if the conditions of use (temperature, current, voltage, etc.) of the product are within the absolute maximum ratings, reliability may be lowered remarkably when continuously used in high load conditions (high temperature, high humidity, high current, high voltage, etc.) Therefore, please derate sufficiently below the absolute maximum ratings and evaluate the device in the actual condition. Moreover, regardless of the application, if malfunctioning can be expected to pose high risk to human life or to property, or if products are used in equipment otherwise requiring high operational safety, in addition to designing double circuits, that is, incorporating features such as a protection circuit or a redundant circuit, safety testing should also be carried out. 2. Applying stress that exceeds the absolute maximum rating If the voltage or current value for any of the terminals exceeds the absolute maximum rating, internal elements will deteriorate because of the overvoltage or overcurrent. In extreme cases, wiring may melt, or silicon P/N junctions may be destroyed. Therefore, the circuit should be designed in such a way that the load never exceed the absolute maximum ratings, even momentarily. (6) When storing or transporting PhotoMOS®, the environment should not be conducive to generating static electricity (for instance, the humidity should be between 45% and 60%), and PhotoMOS® should be protected using conductive packing materials. 6. Short across terminals Do not short circuit between terminals when device is energized, since there is possibility of breaking of the internal IC. 7. Recommended operating conditions Design in accordance with the recommended operating conditions for each product. Since these conditions are affected by the operating environment, ensure conformance with all relevant specifications. 8. Ripple in the input power supply If ripple is present in the input power supply, observe the following: 1) Please maintain the input voltage at least 3V for Emin. 2) Please make sure the input voltage for Emax. is no higher than 5.5V. 3) Please keep amplitude voltage of ripple within ±0.5V. within ±0.5V Set voltage 3. Input voltage For rising and dropping ratio of input voltage(dv/dt), maintain min. 100mV/ms. Emax. Emin. within ±0.5V 4. Oscillation circuit and control circuit The oscillation circuit and control circuit of product may be destroyed by external noise, surge, static electricity and so on. For noise effect to peripheral circuits when oscillation circuit operates, please implement safety measures on the system before use by verifying operation under the actual design. 5. Deterioration and destruction caused by discharge of static electricity This phenomenon is generally called static electricity destruction, and occurs when static electricity generated by various factors is discharged while the PhotoMOS® terminals are in contact, producing internal destruction of the element. To prevent problems from static electricity, the following precautions and measures should be taken when using your device. (1) Employees handling PhotoMOS® should wear anti-static clothing and should be grounded through protective resistance of 500kΩ to 1MΩ. (2) A conductive metal sheet should be placed over the worktable. Measuring instruments and jigs should be grounded. (3) When using soldering irons, either use irons with low leakage current, or ground the tip of the soldering iron. (Use of low-voltage soldering irons is also recommended.) (4) Devices and equipment used in assembly should also be grounded. (5) When packing printed circuit boards and equipment, avoid using high-polymer materials such as foam styrene, plastic, and other materials which carry an electrostatic charge. –9– 9. Output spike voltages 1) If an inductive load generates spike voltages which exceed the absolute maximum rating, the spike voltage shall be limited. Representative circuit examples of AC/DC dual use type are shown below. It is the same with DC only type. 1 4 2 3 Load Clamp diode is connected in parallel with the load. 1 4 2 3 Load CR snubber is connected in parallel with the load. 2) When Clamp diode or CR Snubber is used in the circuit, the spike voltages from the load are limited. But the longer wire may become the inductance and cause the spike voltage. Keep the wire as short as possible. ASCTB359E 201805-T CC TSON C×R (AQY2C❍❍❍P) 10. Reverse voltages at the input If reverse voltages are present at the input terminals, for example, connect a schottky barrier diode in reverse parallel across the input terminals and keep the reverse voltages below the reverse breakdown voltage. Typical circuit is shown below. 1 4 2 3 14. Soldering (1) IR (Infrared reflow) soldering method In case of automatic soldering, following conditions should be observed. (recommended condition reflow: Max. 2 times, measurement point: soldering lead) t3 T3 T1 = 150 to 180°C 302 to 356°F T2 = 230°C 446°F T3 = 240 to 245°C 464 to 473°F t1 = 60 to 120 s t2 = Within 30 s t3 = Within 10 s T2 T1 11. Connection between input and output If you wish to use the product with a connection between input and output, you may not obtain performance. Therefore, please be sure to evaluate the device in the actual usage before use. A circuit example is shown below that may negatively affect PhotoMOS® characteristics. 1 V IN 4 IL IIN 2 3 VL (AC,DC) Load t1 t2 (2) Other soldering methods Other soldering methods (VPS, hot-air, hot plate, laser heating, pulse heater, etc.) affect the PhotoMOS® characteristics differently, please evaluate the device under the actual usage. (3) Manual soldering method Temperature: 350 to 400°C 662 to 752°F, electrical power 30 to 60W, within 3s • We recommend one with an alloy composition of Sn3.0Ag0.5Cu. 12. Cleaning solvents compatibility Cleaning the solder flux should use the immersion washing with an organic solvent. If you have to use ultrasonic cleaning, please adopt the following conditions and check that there are no problems in the actual usage. • Frequency: 27 to 29kHz • Ultrasonic output: No greater than 0.25W/cm2* • Cleaning time: 30s or less • Cleanser used: Asahiklin AK-225 • Others: Float PCB and the device in the cleaning solvent to prevent from contacting the ultrasonic vibrator. *Note; Applies to unit area ultrasonic output for ultrasonic baths 13. Notes for mounting 1) When different kinds of packages are mounted on PCB, temperature rise at soldering lead is highly dependent on package size. Therefore, please set the lower temperature soldering condition than the conditions of item “14. Soldering”, and confirm the temperature condition of actual usage before soldering. 2) When soldering condition exceeds our recommendation, the PhotoMOS® characteristics may be adversely affected. It may occur package crack or bonding wire breaking because of thermal expansion unconformity and resin strength reduction. Please contact us about the propriety of the condition. 3) Please confirm the heat stress by using actual board because it may be changed by board condition or manufacturing process condition 4) Solder creepage, wettability, or soldering strength will be affected by the soldering condition or used soldering type. Please check them under the actual production condition in detail. 5) Please apply coating when the device returns to a room temperature. 15. Transportation and storage 1) Extreme vibration during transport may deform the lead or damage the PhotoMOS® characteristics. Please handle the outer and inner boxes with care. 2) Inadequate storage condition may degrade soldering, appearance, and characteristics. The following storage conditions are recommended: • Temperature: 0 to 45°C 32 to 113°F • Humidity: Max. 70%RH • Atmosphere: No harmful gasses such as sulfurous acid gas, minimal dust. 3) Storage before TSON processing In case the heat stress of soldering is applied to the PhotoMOS® which absorbs moisture inside of its package, the evaporation of the moisture increases the pressure inside the package and it may cause the package blister or crack. This device is sensitive to moisture and it is packed in the sealed moisture-proof package. Please make sure the following condition after unsealing. • Please use the device immediately after unsealing. (Within 30 days at 0 to 30°C 32 to 86°F and Max. 70%RH) • If the device will be kept for a long time after unsealing, please store in the another moisture-proof package containing silica gel. (Please use within 90 days.) 16. Water condensation Water condensation occurs when the ambient temperature changes suddenly from a high temperature to low temperature at high humidity, or the device is suddenly transferred from a low ambient temperature to a high temperature and humidity. Condensation causes the failures such as insulation deterioration. Panasonic Corporation does not guarantee the failures caused by water condensation. The heat conduction by the equipment the PhotoMOS® is mounted may accelerate the water condensation. Please confirm that there is no condensation in the worst condition of the actual usage. (Special attention should be paid when high temperature heating parts are close to the PhotoMOS®.) –10– ASCTB359E 201805-T CC TSON C×R (AQY2C❍❍❍P) Packaging format 1) Tape and reel (Unit: mm inch) Tape dimensions 0.2±0.05 .008±.002 Tractor feed holes 1.5+0.5 −0 dia. .059+.020 dia. −0 2.2±0.2 .087±.008 2.4±0.2 .094±.008 Device mounted on tape 1.2±0.3 .047±.012 Dimensions of tape reel 21±0.8 .827±.031 Direction of picking 4±0.1 .157±.004 2±0.5 .079±.020 1.75±0.1 .069±.004 180±3 dia. 7.087±.118 dia. 60 dia. 2.362±.118 dia. ±3 12±0.3 .472±.012 1.05±0.1 dia. .041±.004 dia. 4±0.1 .157±.004 2±0.1 .079±.004 ±0.1 5.5 .217±.004 13±0.5 dia. .512±.020 dia. 13±1.5 .512±.059 1.2±0.5 .047±.020 (1) When picked from 1/2-pin side: Part No. AQY2C❍R❍PX (Shown above) (2) When picked from 3/4-pin side: Part No. AQY2C❍R❍PZ –11– ASCTB359E 201805-T