Fan Motor Selector Chart
AC FAN MOTOR
ASEN6051∗
60 sq.×30t
ASEN8021∗
NEW
80 sq.×25t
NEW
ASEN804∗∗∗
80 sq.×38t
NEW
Type
Rated voltage
Frequency
Input power (W) +10
−20%
Rated current, max. (mA)
Locked current (mA)
Rotation speed, min. (r/min)
Max. air flow, min. (m3/min)
Max. static pressure, min. (Pa)
Noise, average (dB(A))
Operating voltage range (V)
Weight (kg)
Page
100 V
115 V
100 V
50/60 Hz
6/5
80/70
85/75
115 V
50/60 Hz
4.5/4
70/60
70/60
6/5
90/80
95/85
2,000/2,600
0.2/0.26
13.7/22.6
28/29
Rated voltage ±10%
0.14
14
ASEN902∗∗∗
6/5
80/70
85/75
2,400/2,750
0.74/0.85
37.5/43
28/33
Rated voltage ±10%
0.22
15
92 sq.×25t
100 V
115 V
200 V
50/60 Hz
9/7
170/120 140/110
80/65
180/160 160/140
90/80
2,700/3,200
0.75/0.9
44.2/62.8
33/38
Rated voltage ±10%
0.3
16
ASEN102∗∗∗
NEW
230 V
10/8
70/55
80/70
120 sq.×25t
NEW
Type
Rated voltage
Frequency
Input power (W) +10
−20%
Rated current, max. (mA)
Locked current (mA)
Rotation speed, min. (r/min)
Max. air flow, min. (m3/min)
Max. static pressure, min. (Pa)
Noise, average (dB(A))
Operating voltage range (V)
Weight (kg)
Page
100 V
190/150
200/170
115 V
200 V
50/60 Hz
13/10
170/130
100/80
180/160
110/100
2,600/3,100
0.80/0.98
43.1/60.8
34/39
Rated voltage ±10%
0.3
17
ASEN104∗∗∗
230 V
100 V
90/70
100/80
220/180
220/200
120 sq.×38t
115 V
200 V
50/60 Hz
14/11
190/160
110/90
200/180
120/100
2,300/2,700
1.8/2.0
41.2/41.2
34/38
Rated voltage ±10%
0.36
18
ASEN5075∗
NEW
230 V
100/90
110/100
150×172×38t
NEW
Type
Rated voltage
Frequency
Input power (W) +10
−20%
Rated current, max. (mA)
Locked current (mA)
Rotation speed, min. (r/min)
Max. air flow, min. (m3/min)
Max. static pressure, min. (Pa)
Noise, average (dB(A))
Operating voltage range (V)
Weight (kg)
Page
100 V
15/14
270/230
370/300
115 V
200 V
50/60 Hz
15.5/14.5
15/13
250/210
140/120
320/270
190/170
2,600/2,900
2.5/2.9
64.7/76.4
37/41
Rated voltage ±10%
0.55
19
02/2006
230 V
100 V
115 V
200 V
230 V
50/60 Hz
15/14
120/100
160/140
37/33
470/400
750/700
35/32
34/33
380/360
230/210
550/530
340/320
2,700/3,200
5.0/6.0
157/215.8
52/56
Rated voltage ±10%
0.8
20
35/35
190/180
280/310
1
Product Types
AC FAN MOTOR
Size
Specifications
Rotation speed
60 sq.×30
Lead wire type
Standard speed
80 sq.×25
Lead wire type
Standard speed
Lead wire type
Standard speed
2-terminal type
Standard speed
Lead wire type
Standard speed
2-terminal type
Standard speed
Lead wire type
Standard speed
2-terminal type
Standard speed
Lead wire type
Standard speed
2-terminal type
Standard speed
2-terminal type
Standard speed
80 sq.×38
92 sq.×25
120 sq.×25
120 sq.×38
150×172×38
Voltage
100V AC
115V AC
100V AC
115V AC
100V AC
115V AC
200V AC
230V AC
100V AC
115V AC
200V AC
230V AC
100V AC
115V AC
200V AC
230V AC
100V AC
115V AC
200V AC
230V AC
100V AC
115V AC
200V AC
230V AC
100V AC
115V AC
200V AC
230V AC
100V AC
115V AC
200V AC
230V AC
100V AC
115V AC
200V AC
230V AC
100V AC
115V AC
200V AC
230V AC
Part number
ASEN60511
ASEN60512
ASEN80211
ASEN80212
ASEN80411
ASEN80412
ASEN80414
ASEN80416
ASEN804519
ASEN804529
ASEN804549
ASEN804569
ASEN90211
ASEN90212
ASEN90214
ASEN90216
ASEN902519
ASEN902529
ASEN902549
ASEN902569
ASEN10211
ASEN10212
ASEN10214
ASEN10216
ASEN102519
ASEN102529
ASEN102549
ASEN102569
ASEN10411
ASEN10412
ASEN10414
ASEN10416
ASEN104519
ASEN104529
ASEN104549
ASEN104569
ASEN50751
ASEN50752
ASEN50754
ASEN50756
Notes: 1. Although “standard speed” is used as the standard fan rotation speed, middle speed and low speed types can be special ordered.
2. 220 V AC and 240 V AC types can be special ordered.
ACCESSORIES
1. Plug Cord for AC Fan Motor
Product name
Plug code for 2-terminal type
Specifications
For inside of appliance, L = 1,000 mm
Compliant with Electrical Appliance and Material Safety Law, L = 1,000 mm
UL Standard, L = 1,000 mm
Part number
ASE51100
ASE51107
ASE51109
2. Fan Guard for DC and AC Fan Motor
Product name
40 sq.
60 sq.
80 sq.
92 sq.
80 sq.
92 sq.
120 sq.
150×172
Specifications
Recognized by UL/CSA
Recognized by UL/CSA
Recognized by UL/CSA
Recognized by UL/CSA
Compliant with Electrical Appliance and Material Safety Law
Compliant with Electrical Appliance and Material Safety Law
Compliant with Electrical Appliance and Material Safety Law
Recognized by UL/CSA
Part number
ASFN48001
ASFN68001
ASFN88001
ASFN98001
ASEN88001
ASEN98001
ASEN18001
ASEN58001
3. Filter for DC and AC Fan Motor
Product name
60 sq.
80 sq.
92 sq.
120 sq.
Part number
ASEN68002
ASEN88002
ASEN98002
ASEN18002
02/2006
2
Ordering Information
AC Type
ASEN
1
0
2
5
1
9
Size
1: 120 sq.
5: 150 x 172
6: 60 sq.
8: 80 sq.
9: 92 sq.
Speed
0: Standard 2: Middle 4: Low
Case thickness
2: 25t
4: 38t
5: 30t
7: 38t (150 x 172 only)
Input type
1: Lead wire type
5: 2-terminal type
Rated voltage
1: 100 V AC
2: 115 V AC
4: 200 V AC
5: 220 V AC
6: 230 V AC
7: 240 V AC
Terminal specification
9: Terminal specification only (150 x 172 type not applicable)
• For the AC type, a middle speed type, low speed type, and 220 V and 240V types can be special ordered.
*Depending on the combination, not all specifications can be met. For details, please consult us.
02/2006
3
60 sq.×30t
(ASEN6)
AC Fan Motor
DIMENSIONS (mm inch)
NEW
300 min
11.811 min
Airflow
8- 8-4
.1 .3
69 d
diaia.
.
60±0.5
50±0.3
2.362±.020 1.969±.012
3.5
.138
RoHS Directive compatibility information
http://www.nais-e.com/
3.5
.138
30±0.5
1.181±.020
50±0.3
1.969±.012
60±0.5
2.362±.020
RATING
Lead wire type, Standard speed
Part number
ASEN60511
ASEN60512
Rated voltage
(V)
100
115
Frequency
(Hz)
50/60
Input power,
+10
−20 % (W)
6/5
4.5/4
Rated current,
max. (mA)
80/70
70/60
Locked current,
max. (mA)
85/75
70/60
*Rotation
speed (r/min)
*Max. air flow
(m3/min)
*Max. static
pressure (Pa)
Noise
(dB(A))
Operating voltage
range (V) (%)
Weight
(kg)
2000/2600
0.2/0.26
13.7/22.6
28/29
(29/30)
±10
0.14
Notes: 1. Asterisks in the table above indicate minimum values.
2. Values above without designations are averages.
3. Noise level was measured at a distance of 1 m from side of fan. Values in brackets were measured at a distance of 1 m from front of fan.
DATA (Airflow - Static pressure
Characteristic Curve)
30
Static pressure (Pa)
60 Hz
50 Hz
Frame: aluminum alloy die-casting
Propeller: plastic
Bearings: ball bearings
Lead wires: UL3266 and AWG22
Label: 100 V class...black base
SPECIFICATIONS
20
10
0
MATERIALS USED
0.2 0.3
0.1
Airflow (m3/min)
Ambient temperature
Ambient humidity
Storage temperature
Breakdown voltage
Insulation resistance
Insulation class
Frequency
Double amplitude width
Vibration
resistance Applied direction
Applied time
Protection
Mean life
–10°C to +60°C +14°F to +140°F
15 to 85%RH
–20°C to +70°C –4°F to +158°F
1,500 V AC for 1 min. (between charging section and frame)
Min. 100MΩ (at 500 V DC megger)(between charging section and frame)
UL:A class, CSA:B class
10 to 55Hz
0.75mm
X, Y and Z directions
10 min. in each direction
Impedance protected
MTTF: 50,000 hrs. (Time it takes until rotation frequency drops 30% of initial value when
run continuously under 25°C 77°F and room humidity at the nominal voltage.)
02/2006
4
80 sq.×25t
(ASEN8)
AC Fan Motor
DIMENSIONS (mm inch)
NEW
300 min
11.811 min
a.
di ia.
3 d
4. 9
8- -.16
8
Airflow
71.5±0.3
80±0.5
2.815±.012 3.150±.020
71.5±0.3
2.815±.012
80±0.5
3.150±.020
25±0.5
.984±.020
RoHS Directive compatibility information
http://www.nais-e.com/
RATING
Lead wire type, Standard speed
Part number
ASEN80211
ASEN80212
Rated voltage
(V)
100
115
Frequency
(Hz)
Input power,
+10
−20 % (W)
50/60
6/5
Rated current,
max. (mA)
90/80
80/70
Locked current,
max. (mA)
95/85
85/75
*Rotation
speed (r/min)
*Max. air flow
(m3/min)
*Max. static
pressure (Pa)
Noise
(dB(A))
Operating voltage
range (V) (%)
Weight
(kg)
2400/2750
0.74/0.85
37.5/43
28/33
(29/34)
±10
0.22
Notes: 1. Asterisks in the table above indicate minimum values.
2. Values above without designations are averages.
3. Noise level was measured at a distance of 1 m from side of fan. Values in brackets were measured at a distance of 1 m from front of fan.
DATA (Airflow - Static pressure
MATERIALS USED
Characteristic Curve)
Frame: aluminum alloy die-casting
Propeller: plastic
Bearings: ball bearings
Lead wires: UL3266 and AWG22
60
Static pressure (Pa)
60Hz
50Hz
Label: 100 V class...black base
SPECIFICATIONS
40
20
0
0.2
0.4
0.6
0.8
Airflow (m3/min)
1.0
Ambient temperature
Ambient humidity
Storage temperature
Breakdown voltage
Insulation resistance
Insulation class
Frequency
Double amplitude width
Vibration
resistance Applied direction
Applied time
Protection
Mean life
02/2006
–10°C to +60°C +14°F to +140°F
15 to 85%RH
–20°C to +70°C –4°F to +158°F
1,500 V AC for 1 min. (between charging section and frame)
Min. 100MΩ (at 500 V DC megger)(between charging section and frame)
UL:A class, CSA:B class
10 to 55Hz
0.75mm
X, Y and Z directions
10 min. in each direction
Impedance protected
MTTF: 50,000 hrs. (Time it takes until rotation frequency drops 30% of initial value when
run continuously under 25°C 77°F and room humidity at the nominal voltage.)
5
80 sq.×38t
(ASEN8)
AC Fan Motor
DIMENSIONS (mm inch)
NEW
Earth tap M4
(200V class)
300 min
11.811 min
Airflow
300 min
11.811 min
Airflow
8- 8-4
.1 .3
69 di
dia a.
.
71.5±0.2
2.815±.008
80±0.5
3.150±.020
RoHS Directive compatibility information
http://www.nais-e.com/
3.4
.134
RATING
3.4
.134
38+0.8
0
3.4
.134
3.4
.134
38+0.8
0
71.5±0.2
2.815±.008
80±0.5
3.150±.020
1.496 +.031
0
1.496 +.031
0
Lead wire type
2 terminals type
1. Lead wire type, Standard speed
Part number
ASEN80411
ASEN80412
ASEN80414
ASEN80416
Rated voltage
(V)
100
115
200
230
Frequency
(Hz)
Input power,
+10
−20 % (W)
9/7
50/60
10/8
Rated current,
max. (mA)
170/120
140/110
80/65
70/55
Locked current,
max. (mA)
180/160
160/140
90/80
80/70
*Rotation
speed (r/min)
*Max. air flow
(m3/min)
*Max. static
pressure (Pa)
Noise
(dB(A))
Operating voltage
range (V) (%)
Weight
(kg)
2700/3200
0.75/0.9
44.2/62.8
33/38
(36/42)
±10
0.3
Rated current,
max. (mA)
170/120
140/110
80/65
70/55
Locked current,
max. (mA)
180/160
160/140
90/80
80/70
*Rotation
speed (r/min)
*Max. air flow
(m3/min)
*Max. static
pressure (Pa)
Noise
(dB(A))
Operating voltage
range (V) (%)
Weight
(kg)
2700/3200
0.75/0.9
44.2/62.8
33/38
(36/42)
±10
0.3
2. 2 terminals type, Standard speed
Part number
ASEN804519
ASEN804529
ASEN804549
ASEN804569
Rated voltage
(V)
100
115
200
230
Frequency
(Hz)
Input power,
+10
−20 % (W)
9/7
50/60
10/8
Notes: 1. Asterisks in the table above indicate minimum values.
2. Values above without designations are averages.
3. Noise level was measured at a distance of 1 m from side of fan. Values in brackets were measured at a distance of 1 m from front of fan.
DATA (Airflow - Static pressure
MATERIALS USED
Characteristic Curve)
Static pressure (Pa)
60 Hz
50 Hz
Frame: aluminum alloy die-casting
Propeller: plastic
Bearings: ball bearings
Lead wires: UL3266 and AWG22
Terminal: Equivalent to Faston #110
Label: 100 V class...black base
200 V class...red base
60
SPECIFICATIONS
40
20
0
0.2
0.4
0.6
0.8
Airflow (m3/min)
1.0
Ambient temperature
Ambient humidity
Storage temperature
Breakdown voltage
Insulation resistance
Insulation class
Frequency
Double amplitude width
Vibration
resistance Applied direction
Applied time
Protection
Mean life
–10°C to +60°C +14°F to +140°F
15 to 85%RH
–20°C to +70°C –4°F to +158°F
1,500 V AC for 1 min. (between charging section and frame)
Min. 100MΩ (at 500 V DC megger)(between charging section and frame)
UL:A class, CSA:B class
10 to 55Hz
0.75mm
X, Y and Z directions
10 min. in each direction
Impedance protected
MTTF: 50,000 hrs. (Time it takes until rotation frequency drops 30% of initial value when
run continuously under 25°C 77°F and room humidity at the nominal voltage.)
02/2006
6
92 sq.×25t
(ASEN9)
AC Fan Motor
DIMENSIONS (mm inch)
NEW
Earth tap M4
(200V class)
6
6- -4.3
.1 d
69 ia
dia .
.
300 min
11.811 min
82.5±0.3
3.248±.012
92.5
3.642
3.5
.138
RoHS Directive compatibility information
http://www.nais-e.com/
3.5
.138
25 +1
–0.3
+.039
.984–.012
3.5
.138
3.5
.138
25 +1
–0.3
+.039
.984–.012
82.5±0.3
3.248±.012
92.5
3.642
Airflow
Airflow
Lead wire type
2 terminals type
RATING
1. Lead wire type, Standard speed
Part number
ASEN90211
ASEN90212
ASEN90214
ASEN90216
Rated voltage
(V)
100
115
200
230
Frequency
(Hz)
Input power,
+10
−20 % (W)
50/60
13/10
Rated current,
max. (mA)
190/150
170/130
100/80
90/70
Locked current,
max. (mA)
200/170
180/160
110/100
100/80
*Rotation
speed (r/min)
*Max. air flow
(m3/min)
*Max. static
pressure (Pa)
Noise
(dB(A))
Operating voltage
range (V) (%)
Weight
(kg)
2600/3100
0.80/0.98
43.1/60.8
34/39
(39/44)
±10
0.3
Rated current,
max. (mA)
190/150
170/130
100/80
90/70
Locked current,
max. (mA)
200/170
180/160
110/100
100/80
*Rotation
speed (r/min)
*Max. air flow
(m3/min)
*Max. static
pressure (Pa)
Noise
(dB(A))
Operating voltage
range (V) (%)
Weight
(kg)
2600/3100
0.80/0.98
43.1/60.8
34/39
(39/44)
±10
0.3
2. 2 terminals type, Standard speed
Part number
ASEN902519
ASEN902529
ASEN902549
ASEN902569
Rated voltage
(V)
100
115
200
230
Frequency
(Hz)
Input power,
+10
−20 % (W)
50/60
13/10
Notes: 1. Asterisks in the table above indicate minimum values.
2. Values above without designations are averages.
3. Noise level was measured at a distance of 1 m from side of fan. Values in brackets were measured at a distance of 1 m from front of fan.
DATA (Airflow - Static pressure
Characteristic Curve)
Static pressure (Pa)
60 Hz
50 Hz
60
MATERIALS USED
Frame: aluminum alloy die-casting
Propeller: plastic
Bearings: ball bearings
Lead wires: UL3266 and AWG22
Terminal: Equivalent to Faston #110
Label: 100 V class...black base
200 V class...red base
SPECIFICATIONS
40
20
0
0.2
0.4
0.6
0.8
1.0
Airflow (m3/min)
Ambient temperature
Ambient humidity
Storage temperature
Breakdown voltage
Insulation resistance
Insulation class
Frequency
Double amplitude width
Vibration
resistance Applied direction
Applied time
Protection
Mean life
02/2006
–10°C to +60°C +14°F to +140°F
15 to 85%RH
–20°C to +70°C –4°F to +158°F
1,500 V AC for 1 min. (between charging section and frame)
Min. 100MΩ (at 500 V DC megger)(between charging section and frame)
UL:A class, CSA:B class
10 to 55Hz
0.75mm
X, Y and Z directions
10 min. in each direction
Impedance protected
MTTF: 50,000 hrs. (Time it takes until rotation frequency drops 30% of initial value when
run continuously under 25°C 77°F and room humidity at the nominal voltage.)
7
120 sq.×25t
(ASEN1)
AC Fan Motor
DIMENSIONS (mm inch)
NEW
Earth tap M4
(200V class)
300 min
11.811 min
8
8- -4.
.1 3 d
69 ia
di .
a.
105±0.3
4.134±.012
119
4.685
RoHS Directive compatibility information
http://www.nais-e.com/
3.5
.138
3.5
.138
3.5
.138
25.5±0.5
1.004±.020
Airflow
RATING
3.5
.138
105±0.3
4.134±.012
119
4.685
25.5±0.5
1.004±.020
Airflow
Lead wire type
2 terminals type
1. Lead wire type, Standard speed
Part number
ASEN10211
ASEN10212
ASEN10214
ASEN10216
Rated voltage
(V)
100
115
200
230
Frequency
(Hz)
Input power,
+10
−20 % (W)
50/60
14/11
Rated current,
max. (mA)
220/180
190/160
110/90
100/90
Locked current,
max. (mA)
220/200
200/180
120/100
110/100
*Rotation
speed (r/min)
*Max. air flow
(m3/min)
*Max. static
pressure (Pa)
Noise
(dB(A))
Operating voltage
range (V) (%)
Weight
(kg)
2300/2700
1.8/2.0
41.2/41.2
34/38
(42/46)
±10
0.36
Rated current,
max. (mA)
220/180
190/160
110/90
100/90
Locked current,
max. (mA)
220/200
200/180
120/100
110/100
*Rotation
speed (r/min)
*Max. air flow
(m3/min)
*Max. static
pressure (Pa)
Noise
(dB(A))
Operating voltage
range (V) (%)
Weight
(kg)
2300/2700
1.8/2.0
41.2/41.2
34/38
(42/46)
±10
0.36
2. 2 terminals type, Standard speed
Part number
ASEN102519
ASEN102529
ASEN102549
ASEN102569
Rated voltage
(V)
100
115
200
230
Frequency
(Hz)
Input power,
+10
−20 % (W)
50/60
14/11
Notes: 1. Asterisks in the table above indicate minimum values.
2. Values above without designations are averages.
3. Noise level was measured at a distance of 1 m from side of fan. Values in brackets were measured at a distance of 1 m from front of fan.
DATA (Airflow - Static pressure
MATERIALS USED
Characteristic Curve)
60
Static pressure (Pa)
60 Hz
50 Hz
Frame: aluminum alloy die-casting
Propeller: plastic
Bearings: ball bearings
Lead wires: UL3266 and AWG22
Terminal: Equivalent to Faston #110
Label: 100 V class...black base
200 V class...red base
SPECIFICATIONS
40
20
0
0.7
1.5
Airflow (m3/min)
2.25
Ambient temperature
Ambient humidity
Storage temperature
Breakdown voltage
Insulation resistance
Insulation class
Frequency
Double amplitude width
Vibration
resistance Applied direction
Applied time
Protection
Mean life
–10°C to +60°C +14°F to +140°F
15 to 85%RH
–20°C to +70°C –4°F to +158°F
1,500 V AC for 1 min. (between charging section and frame)
Min. 100MΩ (at 500 V DC megger)(between charging section and frame)
UL:A class, CSA:B class
10 to 55Hz
0.75mm
X, Y and Z directions
10 min. in each direction
Impedance protected
MTTF: 50,000 hrs. (Time it takes until rotation frequency drops 30% of initial value when
run continuously under 25°C 77°F and room humidity at the nominal voltage.)
02/2006
8
120 sq.×38t
(ASEN1)
AC Fan Motor
DIMENSIONS (mm inch)
NEW
300 min
11.811 min
Earth tap M4
(200V class)
.
dia ia.
4.3 69 d
8 .1
8-
105±0.3
4.134±.012
119
4.685
AIRFLOW
105±0.3
4.134±.012
119
4.685
38±0.5
1.496±.020
Airflow
38±0.5
1.496±.020
Airflow
RoHS Directive compatibility information
http://www.nais-e.com/
AIRFLOW
38±0.5
1.496±.020
Airflow
Lead wire type 2 terminals type
RATING
1. Lead wire type, Standard speed
Part number
ASEN10411
ASEN10412
ASEN10414
ASEN10416
Rated voltage
(V)
100
115
200
230
Frequency
(Hz)
Input power,
+10
−20 % (W)
15/14
15.5/14.5
15/13
15/14
50/60
Rated current,
max. (mA)
270/230
250/210
140/120
120/100
Locked current,
max. (mA)
370/300
320/270
190/170
160/140
*Rotation
speed (r/min)
*Max. air flow
(m3/min)
*Max. static
pressure (Pa)
Noise
(dB(A))
Operating voltage
range (V) (%)
Weight
(kg)
2600/2900
2.5/2.9
64.7/76.4
37/41
(44/48)
±10
0.55
Rated current,
max. (mA)
270/230
250/210
140/120
120/100
Locked current,
max. (mA)
370/300
320/270
190/170
160/140
*Rotation
speed (r/min)
*Max. air flow
(m3/min)
*Max. static
pressure (Pa)
Noise
(dB(A))
Operating voltage
range (V) (%)
Weight
(kg)
2600/2900
2.5/2.9
64.7/76.4
37/41
(44/48)
±10
0.55
2. 2 terminals type, Standard speed
Part number
ASEN104519
ASEN104529
ASEN104549
ASEN104569
Rated voltage
(V)
100
115
200
230
Frequency
(Hz)
Input power,
+10
−20 % (W)
15/14
15.5/14.5
15/13
15/14
50/60
Notes: 1. Asterisks in the table above indicate minimum values.
2. Values above without designations are averages.
3. Noise level was measured at a distance of 1 m from side of fan. Values in brackets were measured at a distance of 1 m from front of fan.
DATA (Airflow - Static pressure
Characteristic Curve)
300
Static pressure (Pa)
60 Hz
50 Hz
Frame: aluminum alloy die-casting
Propeller: plastic
Bearings: ball bearings
Lead wires: UL3266 and AWG22
Terminal: Equivalent to Faston #110
Label: 100 V class...black base
200 V class...red base
SPECIFICATIONS
200
100
0
MATERIALS USED
0
2
4
6
Airflow (m3/min)
Ambient temperature
Ambient humidity
Storage temperature
Breakdown voltage
Insulation resistance
Insulation class
Frequency
Double amplitude width
Vibration
resistance Applied direction
Applied time
Protection
Mean life
02/2006
–10°C to +60°C +14°F to +140°F
15 to 85%RH
–20°C to +70°C –4°F to +158°F
1,500 V AC for 1 min. (between charging section and frame)
Min. 100MΩ (at 500 V DC megger)(between charging section and frame)
UL:A class, CSA:B class
10 to 55Hz
0.75mm
X, Y and Z directions
10 min. in each direction
Impedance protected
MTTF: 50,000 hrs. (Time it takes until rotation frequency drops 30% of initial value when
run continuously under 25°C 77°F and room humidity at the nominal voltage.)
9
150×172×38t
(ASEN5)
AC Fan Motor
DIMENSIONS (mm inch)
NEW
Equivalent to Faston #110
Earth tap M4
(200V class)
Airflow
162±0.2
172±1
6.378±.008 6.772±.039
a.
di a.
3 di
4. 69
4 -.1
4
150
RoHS Directive compatibility information
http://www.nais-e.com/
6
.236
38±0.2
1.496±.008
5.906
RATING
2 terminals type, Standard speed
Part number
ASEN50751
ASEN50752
ASEN50754
ASEN50756
Rated voltage
(V)
100
115
200
230
Frequency
(Hz)
Input power,
+10
−20 % (W)
37/33
35/32
34/33
35/35
50/60
Rated current,
max. (mA)
470/440
380/360
230/210
190/180
Locked current,
max. (mA)
750/700
550/530
340/320
280/310
*Rotation
speed (r/min)
*Max. air flow
(m3/min)
*Max. static
pressure (Pa)
Noise
(dB(A))
Operating voltage
range (V) (%)
Weight
(kg)
2700/3200
5.0/6.0
157/215.8
52/56
(57/61)
±10
0.8
Notes: 1. Asterisks in the table above indicate minimum values.
2. Values above without designations are averages.
3. Noise level was measured at a distance of 1 m from side of fan. Values in brackets were measured at a distance of 1 m from front of fan.
DATA (Airflow - Static pressure
Characteristic Curve)
300
Static pressure (Pa)
60 Hz
50 Hz
Frame: aluminum alloy die-casting
Propeller: plastic
Bearings: ball bearings
Terminal: Equivalent to Faston #110
Label: 100 V class...black base
200 V class...red base
SPECIFICATIONS
200
100
0
MATERIALS USED
0
2
4
6
Airflow (m3/min)
Ambient temperature
Ambient humidity
Storage temperature
Breakdown voltage
Insulation resistance
Insulation class
Frequency
Double amplitude width
Vibration
resistance Applied direction
Applied time
Protection
Mean life
–10°C to +60°C +14°F to +140°F
15 to 85%RH
–20°C to +70°C –4°F to +158°F
1,500 V AC for 1 min. (between charging section and frame)
Min. 100MΩ(at 500 V DC megger)(between charging section and frame)
UL:A class, CSA:B class
10 to 55Hz
0.75mm
X, Y and Z directions
10 min. in each direction
Impedance protected
MTTF: 50,000 hrs. (Time it takes until rotation frequency drops 30% of initial value when
run continuously under 25°C 77°F and room humidity at the nominal voltage.)
02/2006
10
Accessories
DIMENSIONS (mm inch)
1. Plug cord for AC Fan Motor
2 terminals type
ASE51100
ASE51109
For inside of appliance
Flat type 2-core cord (20/0.18)
9
.354
7.5
.295
23.5
.925
UL Standard: File No. E106219
Thermoplastic, flat type 2-core cord
UL SPT-1 AWG18 (41/0.16)
CSA POT-64 AWG18 (41/0.16)
1000±30
39.37±1.181
7
.276
9
.354
7.5
.295
10±5
.394±.197
15.5
.610 18
.709
8±0.1
.315±.004
23.5
.925
1000±30
39.37±1.181
7
.276
10±5
.394±.197
15.5
.610 18
.709
8±0.1
.315±.004
ASE51107
Compliant with Electrical Appliance and Material Safety Law
Flat type 2-core cord (30/0.18)
9.3
.366
7.5
.295
20
.787
1000±30
39.37±1.181
7
.276
22
.866
10±5
.394±.197
16.7
.657
8±0.1
.315±.004
18.5
.728
ASFN88001
ASFN98001
Recognized for 40 sq. by UL/CSA
Material used: Steel, 1.6 dia.
Recognized for 80 sq. by UL/CSA
Material used: Steel, 1.6 dia.
Recognized for 92 sq. by UL/CSA
Material used: Steel, 1.6 dia.
.
4 dia ia.
d
.157
ia.
d
.1
29
dia.
1.146
14.2
.559 dia.
dia.
2. Fan guard (You can use this with both DC and AC types.)
ASFN48001
ASFN68001
Recognized for 60 sq. by UL/CSA
Material used: Steel, 1.6 dia.
5.0
.197
4.8
.189
53.2 dia.
2.094 dia.
32
1.260
1.6 dia.
.063 dia.
1.6 dia.
.063 dia.
4.6 dia.
.181 dia.
50.0
1.969
5.0
.197
5.0
.197
1.6 dia.
.063 dia.
76.2 dia.
3.000 dia.
1.8 dia.
.071 dia.
4.6 dia.
.181 dia.
71.4
2.811
1.6 dia.
.063 dia.
89.5 dia.
3.524 dia.
82.4
3.244
1.8 dia.
.071 dia.
4.6 dia.
.181 dia.
ASEN88001
ASEN98001
ASEN18001
ASEN58001
For 80 sq. by Electrical Appliance
and Material Safety Law
Material used: Steel, 1.6 dia.
For 92 sq. by Electrical Appliance
and Material Safety Law
Material used: Steel, 1.6 dia.
For 120 sq. by Electrical Appliance
and Material Safety Law
Material used: Steel, 1.6 dia.
Recognized for
150×172 by UL/CSA
Material used: Steel, 2.3 dia.
4.3
.169
4.3
.169
4.3
.169
1.6 dia.
.063 dia.
1.6 dia.
.063 dia.
105
4.134
5.0
.197
1.6 dia.
.063 dia.
121
4.764
80 dia.
3.150 dia.
30 dia.
1.181 dia.
30 dia.
1.181 dia.
90 dia.
3.543 dia.
1.8 dia. .071 dia.
2.3 dia.
.091 dia.
60.2
2.370
5.0
.197
4.8
.18 dia.
9d
ia.
5.0
.197
152.5
6.004
108 dia.
4.252 dia.
30 dia.
1.181 dia.
154.4 dia.
6.079 dia.
162.05
6.380
3. Fan motor filter (You can use this with both DC and AC types.)
ASEN68002
ASEN88002
ASEN98002
ASEN18002
For 60 sq.
For 120 sq.
For 80 sq.
83.6 3.291
71.5 2.815
.
dia .
3.8 0 dia
.15
dia.
3.8 0 dia.
.15
10
.394
10
.394
02/2006
123.7 4.870
104.8 4.126
96.5 3.799
82.5 3.248
.
dia .
4.5 7 dia
.17
123.7 4.870
104.8 4.126
96.5 3.799
82.5 3.248
83.6 3.291
71.5 2.815
60 2.362
50 1.969
60 2.362
50 1.969
6.4
.252
For 92 sq.
6.45
.254
.
dia ia.
4.577 d
1
.
10.7
.421
11
Mounting Hole Dimensions
For DC Fan Motor
1. 30 sq. Series
Discharge side/Suction side
2. 40 sq. Series
Discharge side/Suction side
4-3.2 dia.
4-.126 dia.
4-4.3 dia.
4-.169 dia.
3
1. 9.0
53
5
.0 5
39 .53
1
38.6 32.0
1.520 1.260
24.0
.945
28.0
1.102
58.0 50.0
2.283 1.969
.
dia ia.
.0 d
65 .559
2
32.0
1.260
38.6
1.520
4. 80 sq. Series
Discharge side/Suction side
5. 92 sq. Series
Discharge side/Suction side
6. 120 sq. Series
Discharge side/Suction side
115.0
4.528
4-4.3 dia.
4-.169 dia.
4-4.3 dia.
4-.169 dia.
105.0
4.134
.
.
dia dia
85 .346
3
77.6 71.5
3.055 2.815
58.0
2.283
50.0
1.969
4-3.5 dia.
4-.138 dia.
2
1. 9.0
14
2
28.0 24.0
1.102 .945
3. 60 sq. Series
Discharge side/Suction side
a.
di .
4 ia
6. 9 d
0
8
1 .1
4
89.4 82.5
3.520 3.248
a.
di .
0 dia
.
6 1
12 .96
4
115.0
4.528
105.0
4.134
71.5
2.815
77.6
3.055
4-4.3 dia.
4-.169 dia.
82.5
3.248
89.4
3.520
For AC Fan Motor
1. 60 sq. Series
Discharge side/Suction side
2. 80 sq. Series
Discharge side/Suction side
50
1.969
77 71.5
3.031 2.815
50
1.969
. a.
dia di
88 .465
3
71.5
2.815
77
3.031
4. 120 sq. Series
Discharge side/Suction side
4-4.3 dia.
4-.169 dia.
4-4.3 dia.
4-.169 dia.
4-4.3 dia.
4-.169 dia.
dia.
58.5 dia.
3
2.30
3. 92 sq. Series
Discharge side/Suction side
89 82.5
3.504 3.248
. .
dia dia
6
10 .173
4
82.5
3.248
89
3.504
5. 150×172 Series
Discharge side/Suction side
2-4.3 dia.
2-.169 dia.
4-4.3 dia.
4-.169 dia.
ia. .
6 d dia
13 354
5.
115 105
4.528 4.134
105
4.134
115
4.528
a. .
di dia
2
15 .984
5
162
6.378
146
5.748
02/2006
12
Functions of DC Fan Sensor
DC FAN SENSOR
If the fan stops as a result of forced external restraint, a signal
will be generated to indicate that there is a problem. This signal
can be used to control an external warning circuit in order to help
prevent the device from overheating.
Although there are various detection methods for this sensor, we
employ the method that uses a logic circuit.
1. Lock sensor specifications
Output waveform
Approx. 5 sec. or less
2. Sensor output circuit
Vcc
Approx. 5 sec. or less
Red
VOH
White
Power
supply
Sensor output
Ic
R
Rating of sensor
VOL
0V
s
Fan rotating
Fan stopped
(locked)
Fan rotating
Black
* Output may be high for approximately 0.5 seconds when power is turned
on.
* The continually high output waveform type when fan is stopped (locked)
is standard.
A high/low output waveform type and output waveform type that
corresponds to the rotation frequency during fan rotation are available
by special order.
Please inquire for details.
02/2006
Power
supply
• Sensor output: Open collector output
Max. 30 V
• Vcc:
Max. 5 mA
• Ic:
Notes: 1. Set the resistance value (R) so that the sensor circuit current
(Ic) does not exceed 5 mA.
2. When using at TTL level, the sensor circuit current (Ic) should
be approximately 2 mA.
* Exceeding the values above may lead to IC damage.
13
Cautions For Use
DC FAN MOTOR
1. Do not reverse-connect the power
supply. Although nothing adverse will
occur if the rated voltage is connected
in reverse for a short time period, the
fan will not operate.
2. If the power is to be pulsed on and
off in order to start and stop the fan
quickly, be sure to install a switch on
the + side of the power supply. Not
doing so may damage the circuit.
3. The DC fan motor installation
bracket has a rib. As shown in the
figure, use the through-bolts when
installing.
4. Use a tightening torque of no more
than 0.6 Nm.
Through-bolt
Fan motor
Installation
surface
DC FAN MOTOR and AC FAN MOTOR
1. Since our fan motor employs
precision ball bearings, due care
should be taken not to apply any
shock in handling.
2. Due to the bearing mechanism, the
noise level will increase in proportion
to the length of time the fan is used.
Avoid use where the temperature is
high or where there is a lot of dirt.
3. Do not allow substances such as oil
and grease to get onto the plastic part
of the fan body. Some oils and greases
decompose and become altered at
high temperatures. These can have an
adverse effect if they contact the fan.
Therefore, be very careful when
handling these substances.
4. Do not apply unnecessary force to
the internal parts when handling the
product. Also, do not use a fan that
has been dropped.
5. Fan life is based on usage at room
temperature and a humidity of 15 to
45% RH. Please verify life under actual
conditions, since life will depend on
the frequency and duration of use, as
well as the atmosphere in which it is
used.
6. Transport and storage conditions
The allowable specifications for
environments suitable for transportation
and storage are given below.
Humidity
(%RH)
85
No freezing
No
condensation
30
15
–20
0
40
70
Temperature
(°C)
Storage temperature range
• No freezing between –20°C to 0°C
–4°F to +32°F
• No condensation in the range above
between 0°C to +70°C
+32°F to +158°F
02/2006
1) Condensation
If the temperature is high and there is a
lot of humidity, condensation will occur
when the temperature suddenly changes.
This should be avoided because it can
cause degradation of the fan insulation.
2) Freezing
At temperatures below 0°C +32°F
moisture such as that caused by
condensation will freeze and lead to
problems such as lockage of the moving
parts and operation lags. Be careful to
prevent this from happening.
3) Low-temperature, low-humidity
environments
Do not leave the fan for a long period in
an environment of low temperature and
low humidity. Doing so may cause the
plastic to become brittle.
4) When storing, avoid places of high
temperature and high humidity or where
corrosive gas is present.
5) Do not store the fan any longer than
six months.
14
Technical Information
MEASUREMENT of AIRFLOW and STATIC PRESSURE
It is very difficult to measure airflow and
static pressure, and there are cases
where measured values vary depending
on measuring devices. There are two
kinds of measuring methods; double
chamber method provided by JIS and
AMCA (Air Moving and Conditioning
Association) and wind tunnel method.
Our company adopted the double
chamber method, and therefore we will
explain it hereinafter.
The auxiliary blower (fan) adjusts an
inner pressure by sucking out air. At this
moment, as airflow and static pressure
are varied by opening or closing the
damper, each value is read on the
manometer.
Maximum airflow:
The damper opens, and the auxiliary
blower sucks out air so that static
pressure becomes zero. At this moment,
the pressure differential (airflow
differential pressure: Pn) in chambers A
and B becomes maximum. The airflow
whose Pn is measured and which is
determined by using the equation shown
at right is called the maximum airflow.
Maximum static pressure:
When the damper is completely closed,
the pressure in chamber A becomes
maximum. At this moment, the pressure
differential (static pressure: Ps) in
chambers A against atmospheric
pressure is called the maximum static
pressure.
Double chamber measuring device
Static pressure
manometer
Ps
Pn
Auxiliary blower
Chamber A
Measured fan
Airflow adjusting damper
Chamber B
Nozzle
2. Unit conversion table
1) Airflow
1. Equation
Airflow Q =
In the above equation,
C: Flow coefficient of nozzle
D: Nozzle diameter (m)
γ: Air density =
m3/min.
l/s
1
0.06
0.0283
16.678
1
0.472
CFM
(ft3/min.)
35.334
2.1186
1
2) Static pressure
Pa
1
9.80665
mmH2O (mmAq)
0.10197
1
t: Temperature(°C)
P: Atmospheric pressure(Pa)
g: 9.8(m/s2)
Pn: Airflow differential pressure (Pa)
Ps: Static pressure (Pa)
NOISE MEASUREMENT
Operation noise is measured by hanging
the fan in midair. For the DC fan, noise is
measured in dB(A) 1 m from the front of
the air-intake side. For the AC fan, noise
is measured in dB(A) 1 m from the front
of the air-intake side and the side of the
fan.
Airflow manometer
The background noise complies with the
section in JIS B8346 that states that it
should be at least 10 dB lower than the
target noise reading.
Our measurements were made in an
anechoic chamber with a background
noise of approximately 15 dB.
DC FAN MOTOR 1 m 3.281 ft
(AC FAN MOTOR 1 m 3.281 ft)
Fan motor
Microphone
AC FAN MOTOR 1 m 3.281 ft
Microphone
COUNTERMEASURES
AGAINST MOISE
Our fan motors are designed placing
great importance on low noise. However,
take into consideration the following
points because noise is influenced
depending on the mechanism design
used.
1) Leave a space between the rear side
of the fan suction opening and the cooled
object.
2) When using two or more fan motors,
leave a space between the fans.
3) According to the mounting hole
dimensions (page 22), design so that the
mounting face and blades are not
crossed.
4) Grease in the bearings will deteriorate
and noise will gradually increase as the
fan is used. The replacement period will
differ depending on the conditions of use
and allowable sound level. We
recommend periodic replacement.
Fan motor
02/2006
15
Technical Information
When selecting a fan motor, for normal
use the following method is used.
1) Determine the amount of heat
generated inside the equipment.
2) Decide the permissible temperature
rise inside the equipment.
Equipment
Fan motor
T2
H
T1
Heat
generating
section
3) Calculate the volume of air necessary
from Equation (1).
Equation (1)
where
Q: Air volume (m3/min.)
H: Heat generated (kW)
T1: Inlet air temperature(°C)
T2: Exhaust air temperature(°C)
∆T: Temperature rise(°C)
4) Determine the system impedance of
the equipment by means of Equation (2).
For the flow of air to the equipment, there
is a loss of pressure due to the resistance
to the flow of air from the components
inside the equipment. This loss varies in
accordance with the flow of air. This is
referred to as the system impedance.
∆P=KQn.........Equation (2)
where
∆P: Pressure drop(Pa{mmH2O})
K: Constant determined for each
equipment
Q: Air volume (m3/min.)
n: Coefficient determined by air flow
In this equation, it is generally considered
that n = 2.
Also, it is difficult to calculate the value of
K, since there is no good method other
than an actual test measurement with the
equipment.
Example:
When the heat generated is 100 W with
∆T = 10°C 50°F, the following is the
result.
Static pressure (Pa{mmH2O})
METHOD OF SELECTING FAN MOTOR
Air volume/static pressure
characteristic curve
System impedance
curve
Operating point
∆P
0.5
Air volume (m3/min.)
The intersection of the air volume/static
pressure characteristic curve with the
system impedance curve is called the
operating point. This shows the condition
with the fan motor operating.
In actuality, the system impedance is
approximately assumed, a fan motor is
decided from the catalogue, the
temperature difference “∆T” and air
volume “Q” are measured, and from this
data the fan is judged as suitable or not
as the ordinary method. If the
temperature difference “∆T” is high
indicating the air volume “Q” is not
satisfactory, because the system
impedance is higher than the assumed
value, a change should be made to a fan
motor with a greater air volume.
FAN MOTOR SERIES/PARALLEL OPERATION
2. In case of parallel operation
1. In case of series operation
R
AI
R
R
AI
Rise in
pressure
Static pressure (Pa)
AI
Static pressure (Pa)
When one fan motor does not satisfy a
sufficient cooling capacity;
Series operation: Higher pressure
characteristic obtained. (Nearly double)
Parallel operation: Larger airflow
characteristic obtained. (Nearly double)
High system
impedance
In case of
one unit
When two units are put into
series operation
Low system
impedance
Increase in airflow
Airflow (m3/min.)
• In case of high system impedance,
static pressure rises.
• In case of low system impedance,
airflow slightly increases.
02/2006
Rise in
pressure
High system
impedance
When two units are put into
parallel operation
In case
of one unit
Increase in airflow
Low system
impedance
Airflow (m3/min.)
• In case of low system impedance,
airflow increases.
• In case of high system impedance,
pressure slightly rises.
16
工商网监
湘ICP备2023018690号
