ASEN80214

80 sq.×25t (ASEN8) AC Fan Motor DIMENSIONS (mm inch) NEW 300 min 11.811 min Airflow 4-4.3 dia. 4-.169 dia. 71.5±0.3 80±0.5 2.815±.012 3.150±.020 (3.2) (.126) Earth tap M4 .157 (3.2) (.126) 71.5±0.3 2.815±.012 80±0.5 3.150±.020 25.3±0.5 .996±.020 RoHS Directive compatibility information http://www.mew.co.jp/ac/e/environment/ RATING Lead wire type, Standard speed Part number ASEN80214 ASEN80216 Rated voltage (V) 200 230 Frequency (Hz) 50/60 Input power, +10 −20 % (W) 7/6 7.5/6.5 Rated current*1 (mA) 60/50 50/45 Locked current*3 (mA) 70/60 60/55 Rotation speed*2 (r/min) Max. air flow*2 (m3/min) Max. static pressure*2 (Pa) Noise*3 (dB(A)) Operating voltage range (V) (%) Weight (kg) 2500/3000 0.57/0.68 39.0/55.0 24/31 (28.5/35.5) ±10 0.24 *1: Designates maximum values, *2: Designates minimum values, *3: Designates average values Notes: 1. Values above without designations are averages. 2. Noise level was measured at a distance of 1 m from side of fan. Values in brackets were measured at a distance of 1 m from front of fan. DATA (Airflow - Static pressure Characteristic Curve) 80 Static pressure (Pa) 60Hz 50Hz MATERIALS USED Frame: aluminum alloy die-casting Propeller: plastic Bearings: ball bearings Lead wires: UL3266 and AWG22 Label: 200 V class...red base SPECIFICATIONS 60 40 20 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 Airflow (m3/min) Ambient temperature Ambient humidity Storage temperature Breakdown voltage Insulation resistance Insulation class Frequency Double amplitude width Vibration resistance Applied direction Applied time Protection Mean life –10°C to +60°C +14°F to +140°F 15 to 85%RH –20°C to +70°C –4°F to +158°F 1,500 V AC for 1 min. (between charging section and frame) Min. 100MΩ (at 500 V DC megger)(between charging section and frame) UL:A class, CSA:B class 10 to 55Hz 0.75mm X, Y and Z directions 10 min. in each direction Impedance protected MTTF: 50,000 hrs. (Time it takes until rotation frequency drops 30% of initial value when run continuously under 25°C 77°F and room humidity at the nominal voltage.) * UL and CSA standard: Pending 15