AV6352643-A

Partly to Be Discontinued: Agency standard type Last time buy: September 30, 2016 Subminiature Size Connector Integrated Type AV6 (CS) SWITCHES FEATURES • Easy assembling as this switch is connector integrated. • High contact reliability by simple dust prevension guard and Au-clad double layer contacts • Two types of contact form are available, the SPST-NC and the SPST-NO. • The lever position can be changed. the standard lever position and the backward lever position. • Protection grade: IP40 29.2 10 TYPICAL APPLICATIONS • Vending machine • Copying machine • Printer • Also for all types of equipment required for maintenance and inspections. (Unit: mm) RoHS compliant ORDERING INFORMATION AV 6 Actuators Operation load 0: Pin plunger Actuator 2: Hinge lever 4: Simulated roller lever 5: Roller lever Contact form 2: SPST-NC (Plunger color: Red) 3: SPST-NO (Plunger color: Yellow) Pin plunger Hinge lever Simulated roller lever Roller lever Contact material 64: CuNi alloy + Au-clad contact 6th digit of part number 2 5 0.50N 1.50N 0.20N 0.50N 0.20N 0.50N 0.20N 0.50N Agency standard 3: UL/C-UL, TÜV Lever position Nil: Standard 12: Backward CONTACT FORM 1) SPST-NC 64 LEVER POSITION 2) SPST-NO 1) Standard NC NO COM COM CURRENT CAPACITY (reference) 2) Backward APPLICABLE CONNECTOR Easy assembling as this switch is connector integrated. • Applicable connector: XA connector produced by JST Mfg. Co., Ltd. Contact: SXA-001T-P0.6 Housing: XAP-02V-1 100mA Applicable range Connector 1mA 0 DC 5V 30V –1– AECTB13E 201509-T Partly to Be Discontinued: Agency standard type Last time buy: September 30, 2016 AV6 (CS) Subminiature Switches PRODUCT TYPES ■ Lever position: Standard Actuator Partly to Be Discontinued: Agency standard type Contact form Operating Force OF, Max. Pin plunger Hinge lever Simulated roller lever Roller lever 0.50N 1.50N SPST-NC AV6202643 AV6205643 SPST-NO AV6302643 AV6305643 0.20N 0.50N 0.20N 0.50N 0.20N 0.50N AV6222643 AV6225643 AV6242643 AV6245643 AV6252643 AV6255643 AV6322643 AV6325643 AV6342643 AV6345643 AV6352643 AV6355643 ■ Lever position: Backward Actuator Partly to Be Discontinued: Agency standard type Contact form Operating Force OF, Max. SPST-NC AV622212643 AV622512643 AV624212643 AV624512643 AV625212643 AV625512643 0.35N 1.00N 0.35N 1.00N 0.35N 1.00N Hinge lever Simulated roller lever Roller lever SPST-NO AV632212643 AV632512643 AV634212643 AV634512643 AV635212643 AV635512643 SPECIFICATIONS ■ Contact rating Contact Contact voltage Resistive load (cos φ ] 1) Au-clad double layer contact 30V DC 5V DC 0.1A 1mA Low-level circuit rating ■ Characteristics Expected life Item Mechanical (OT max.) Electrical (Rated load OT max.) Insulation resistance Dielectric strength Between non-continuous terminals Between each terminal and other exposed metal parts Between each terminal and ground Contact resistance (initial) Viblation resistance (malfunction vibration resistance) Specifications Min. 5 × 105 (at 60 cpm) Min. 2 × 105 (at 20 cpm) Min. 100MΩ 1,000 Vrms for 1 min. 1,500 Vrms for 1 min. 1,500 Vrms for 1 min. 100mΩ max. (by voltage drop 0.1A 6 to 8 VDC) Value includes the resistance between the connector and the lead (#AWG28, length: 50 mm) 10 to 55 Hz at single amplitude of 0.75mm (Contact opening: max. 1msec.) Connector insertion force Connector holding force Connector removal operating times Allowable operating speed (No load) Max. operating cycle rate (No load) Ambient temperature Unit weight Contact specifications Contact material Applied shock 1.50N type: Min.300m/s2 (Contact opening: Max. 1msec.) 0.50N type: Min.150m/s2 (Contact opening: Max. 1msec.) Max. 20N (inserted in removal direction) Min. 20N (extracted by static load, in removal direction) Max. 5 times (in removal direction) 0.1 to 1,000 mm/s (at pin plunger) 300 cpm –25 to +85°C (No freezing and condensing) Approx. 2.5g (pin plunger type) CuNi alloy + Au-clad Protection grade IP40 Shock resistance (malfunction shock resistance) ■ Operating characteristics 1) Lever position: Standard Actuator Pin plunger Hinge lever Simulated roller lever Roller lever Operating Force OF, Max. 0.50N 1.50N 0.20N 0.50N 0.20N 0.50N 0.20N 0.50N Release Force RF, Min. 0.04N 0.25N 0.02N 0.06N 0.02N 0.06N 0.02N 0.06N Pretravel PT, Max. Movement Differential MD, Max. Overtravel OT, Min. Operating Position OP 0.6mm 0.1mm 0.4mm 8.4±0.3mm 2.6mm 0.8mm 1.2mm 10.0±0.8mm 2.6mm 0.8mm 1.2mm 12.2±0.8mm 2.6mm 0.8mm 1.2mm 15.7±0.8mm –2– AECTB13E 201509-T Partly to Be Discontinued: Agency standard type Last time buy: September 30, 2016 AV6 (CS) Subminiature Switches 2) Lever position: Backward Actuator Hinge lever Simulated roller lever Roller lever Operating Force OF, Max. 0.35N 1.00N 0.35N 1.00N 0.35N 1.00N Release Force RF, Min. 0.03N 0.10N 0.03N 0.10N 0.03N 0.10N Pretravel PT, Max. Movement Differential MD, Max. Overtravel OT, Min. Operating Position OP 1.4mm 0.6mm 0.7mm 9.2±0.6mm 1.4mm 0.6mm 0.7mm 11.3±0.6mm 1.4mm 0.6mm 0.7mm 14.9±0.6mm DIMENSIONS The CAD data of the products with a (Unit: mm) General tolerance: ±0.25 CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ ■ Pin plunger External dimensions CAD Data Pin plunger type PT 0.6 max. 3.85 7.6 Pin plunger +0.05 type OP 10.0 7.7 2.4 −0.1 8.4±0.3 2.5 Base line 2.5 5.7 9.5 −0.1 2.4 +0.05 ±0.1 7 ±0.08 29.2 Pretravel PT, Max. Movement Differential MD, Max. Overtravel OT, Min. Operating Distance from Position OP mounting hole 0.6mm 0.1mm 0.4mm 8.4±0.3mm ■ Hinge lever Lever position: Standard External dimensions CAD Data PT 2.6 max. 18.2 12.9 10.0 4.0 OP 10.0±0.08 +0.05 7.7 2.4 −0.1 2.5 −0.1 2.4 +0.05 2.5±0.1 5.7 9.5 7 ±0.08 29.2 Pretravel PT, Max. Movement Differential MD, Max. Overtravel OT, Min. Operating Distance from Position OP mounting hole 2.6mm 0.8mm 1.2mm 10.0±0.8mm Lever position: Backward External dimensions CAD Data 18.2 PT 1.4 max. 4.0 2.4 OP +0.05 9.2±0.6 10.0 7.7 2.4 −0.1 2.5 2.5 5.7 9.5 −0.1 2.4 +0.05 ±0.1 ±0.08 29.2 –3– 7 Pretravel PT, Max. Movement Differential MD, Max. Overtravel OT, Min. Operating Distance from Position OP mounting hole 1.4mm 0.6mm 0.7mm 9.2±0.6mm AECTB13E 201509-T Partly to Be Discontinued: Agency standard type Last time buy: September 30, 2016 AV6 (CS) Subminiature Switches ■ Simulated roller lever Lever position: Standard External dimensions CAD Data 10.0 4.0 PT 2.6 max. 19.2 12.9 OP 12.2±0.8 +0.05 7.7 2.4 −0.1 2.5 −0.1 2.4 +0.05 2.5±0.1 5.7 7 9.5±0.08 29.2 Pretravel PT, Max. Movement Differential MD, Max. Overtravel OT, Min. Operating Distance from Position OP mounting hole 2.6mm 0.8mm 1.2mm 12.2±0.8mm Lever position: Backward External dimensions CAD Data PT 1.4 max. 4.0 19.2 2.4 OP 11.3±0.6 10.0 +0.05 7.7 2.4 −0.1 2.5 2.5 5.7 9.5 −0.1 2.4 +0.05 ±0.1 7 ±0.08 29.2 Pretravel PT, Max. Movement Differential MD, Max. 1.4mm 0.6mm Overtravel OT, Min. Operating Distance from Position OP mounting hole 0.7mm 11.3±0.6mm  Roller lever Lever position: Standard External dimensions CAD Data PT 2.6 max. 18 12.9 OP 15.7±0.8 10.0 +0.05 7.7 2.4 −0.1 2.5 2.5 5.7 −0.1 2.4 +0.05 ±0.1 7 9.5±0.08 29.2 Pretravel PT, Max. Movement Differential MD, Max. Overtravel OT, Min. Operating Distance from Position OP mounting hole 2.6mm 0.8mm 1.2mm 15.7±0.8mm Lever position: Backward External dimensions CAD Data PT 1.4 max. 18 2.4 OP 14.9±0.6 10.0 +0.05 7.7 2.4 −0.1 2.5 2.5±0.1 5.7 −0.1 2.4 +0.05 9.5±0.08 29.2 –4– 7 Pretravel PT, Max. Movement Differential MD, Max. Overtravel OT, Min. Operating Distance from Position OP mounting hole 1.4mm 0.6mm 0.7mm 14.9±0.6mm AECTB13E 201509-T Partly to Be Discontinued: Agency standard type Last time buy: September 30, 2016 AV6 (CS) Subminiature Switches CAUTIONS FOR USE ■ Fastening of the switch body 1) To secure the switch, please use an M2.3 screw on a flat surface and tighten using a maximum torque of 0.29 N·m. It is recommended that both flat metal washer and spring washers be used with the screws and adhesive be applied to lock the screws to prevent loosening of the screws. 2) Be sure to maintain adequate insulating clearance between each terminal and ground. 3) When the operation object is in the free position, force should not be applied directly to the actuator or pin plunger. Also force should be applied to the pin plunger from vertical direction to the switch. 4) In setting the movement after operation, the over-travel should be set more than 70% as a standard. With the lever type, do not apply excessive force in the direction opposite to the movement, or from the horizontal direction. ■ About the connector 1) The connector on the AV6 (CS) switch is designed to fit with the XA connector produced by JST Mfg. Co., Ltd. Do not use any connector other than the specified connector, or solder the terminals directly. 2) Make sure leads are arranged so that no constant force is applied to them when the connectors are mated. 3) Keep the connector straight when inserting it. If it is inserted at an angle, it may snag near the entrance, or it may be inserted too forcefully. 4) Problems thought to be caused by the XA connector, which is specified as conforming to the AV6 (CS) switch connector, are not covered by the warranty. Please contact JST Mfg., Co., Ltd. and request cooperation in resolving the problem. ■ Selection of switch Please make your selection so that there will be no problems even if the operating characteristics vary up to ±20% from the standard values. –5– ■ Environment Avoid using and storing these switches in a location where they will be exposed to corrosive gases, silicon, or high dust levels, all of which can have an adverse effect on the contacts. ■ Precautions concerning circuits The AV6 (CS) switch is designed specifically for low-voltage, low-current loads. Avoid using it at loads that exceed the rating load. ■ Quality check under actual loading conditions To assure reliability, check the switch under actual loading conditions. Avoid any situation that may adversely affect switching performance. AECTB13E 201509-T