AVM3405P9-A

• 10.1 Amp. high contact capacity is available • Long life • Precise operating position (0.25mm: Pin plunger type) • Flux-resistant construction with integrally molded terminals • In-line terminals make soldering works easy • UL/CSA approved Products are discontinued. TYPICAL APPLICATIONS Micro switches IP67 FEATURES AVM3P (PS) SWITCHES • Heaters • Electric rice cookers • Copiers • Printers • Facsimiles • Vending machines • Measuring equipment • Audio equipment Micro switches IP40 HIGH CAPACITY, LONG LIFE SUBMINIATURE SWITCH ORDERING INFORMATION AVM3 1 0 5 P Type of switch Terminals Actuators PS switch 1: Self-standing solder terminal with guard 2: Self-standing solder terminal without guard 3: Self-standing solder terminal with opposite side guard 4: Self-standing PC terminal 0: Pin plunger 1: Short hinge lever 2: Hinge lever 3: Long hinge lever 4: Simulated roller lever 5: Roller lever CONSTRUCTION 9 Operating force by pin plunger, max. 5: 1.47 N CONTACT ARRANGEMENT: SPDT Capacity P: High capacity (10.1 A) Agency standard 9: UL/CSA Micro operation switches Ex. DATA Electrical life curve NO NC No. of operations,
104 30 COM 20 10 5 3 1 0 5 10 Load current (A) ds_62003_0104_en_avm3: 010812J Switches Selector Chart AVM3P Discontinued Discontinuedas asof ofFebruary February29, 29,2012 2012 1 Switches Selector Chart AVM3P PRODUCT TYPES Contact Gold-clad Micro switches IP67 Discontinued as of February 29, 2012 Part No. Self-standing solder terminal Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Without guard With guard AVM3205P9 AVM3215P9 AVM3225P9 AVM3235P9 AVM3245P9 AVM3255P9 AVM3105P9 AVM3115P9 AVM3125P9 AVM3135P9 AVM3145P9 AVM3155P9 Self-standing PC terminal With opposite side guard AVM3305P9 AVM3315P9 AVM3325P9 AVM3335P9 AVM3345P9 AVM3355P9 AVM3405P9 AVM3415P9 AVM3425P9 AVM3435P9 AVM3445P9 AVM3455P9 SPECIFICATIONS 1. Contact rating Resistive load (cos ≈ 1) 10.1A, 250V AC Micro operation switches Micro switches IP40 2. Characteristics Electrical Mechanical Between terminals Dielectric Between terminals and other exposed metal parts strength Between terminals and ground Insulation resistance Contact resistance (initial) Allowable operating speed (at no load) Max. operating cycle rate (at no load) Ambient temperature Unit weight Contact material Expected life Min. 5  104 (at 20 cpm) (O.T. max.) Min. 3  107 (O.T.: Specified value), at 60 cpm 1,000 Vrms for 1 min. (at 10 mA) 2,000 Vrms for 1 min. (at 10 mA) 2,000 Vrms for 1 min. (at 10 mA) Min. 100M (at 500V DC) Max. 50m (By voltage drop, 1A 6 to 8V DC) 0.1 to 1,000 mm/sec. 300 cpm –25 to +85C (Not freezing below 0C) Approx. 2g AgNi alloy 3. Operating characteristics Actuator Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force, Max. 1.47 N 0.59 N 0.54 N 0.44 N 0.54 N 0.59 N Release force, Min. 0.20 N 0.039 N 0.034 N 0.029 N 0.034 N 0.039 N DIMENSIONS Pretravel, Max. mm 0.6 mm 2.5 mm 2.8 mm 3.5 mm 2.8 mm 2.5 mm Movement differential, Max. mm 0.1 mm 0.5 mm 0.8 mm 1.0 mm 0.8 mm 0.5 mm Overtravel, Min. mm 0.4 mm 0.8 mm 1.2 mm 1.6 mm 1.2 mm 0.8 mm Operating position mm 8.40.25 mm 8.80.8 mm 8.80.8 mm 8.81.2 mm 11.650.8 mm 14.50.8 mm Interested in CAD data? You can obtain CAD data for all products with a CAD Data mark from your local Panasonic Electric Works representative. mm General tolerance: 0.25 1. Self-standing PC terminal (Without guard) Pin plunger PC board pattern CAD Data 3-1.2 0.05 dia. Pin plunger position (10.55) (P.T.) 0.6 max. 7.6 0.3 4.0 1.8 1.85 (O.P.) 6.7 8.4 0.25 (O.P.) 11.8 0.35 7.7 2.4 +0.1 -0.05 NO C NC 8.7 0.15 0.2 15.4 0.1 1.5 0.12 1.1 0.12 3.4 0.15 7.4 2.4 0.5 0.5 0.9 9.5 0.1 8.7 1.25 5.2 0.15 2.2 15.4 0.15 19.8 0.3 2 2.4 +0.1 -0.05 dia. 2.5 0.1 0.75 6.4 0.2 2.2 0.1 0.1 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min mm Distance from Operating mounting hole, position mm 0.6 0.1 0.4 8.40.25 ds_62003_0104_en_avm3: 010812J mm General tolerance: 0.25 Short hinge lever CAD Data 4.0 (P.T.) 2.5 max. 1.85 0.2 (O.P.) 0.8 (O.P.) 6.7 8.8 12.2 0.9 7.7 2.4 +0.1 -0.05 NO C NC 1.5 0.12 Micro switches IP67 5.0 0.4 12.85 1.1 0.12 3.4 0.15 7.4 2.4 2.4 +0.1 -0.05 dia. 2.5 0.1 0.75 0.5 8.7 0.5 0.9 9.5 0.1 5.2 0.15 2.2 15.4 1.25 0.1 6.4 0.2 0.15 2.2 0.1 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min mm Distance from Operating mounting hole, position mm 2.5 0.5 0.8 8.80.8 Micro switches IP40 19.8 0.3 Hinge lever CAD Data 4.0 1.85 0.2 (O.P.) 6.7 8.8 0.8 (O.P.) 12.2 0.9 7.7 2.4 +0.1 -0.05 NO C NC Micro operation switches (P.T.) 2.8 max. 7.15 0.4 12.85 1.5 0.12 1.1 0.12 3.4 0.15 7.4 2.4 2.4 +0.1 -0.05 dia. 0.75 0.5 2.5 0.1 0.5 9.5 8.7 0.15 15.4 1.25 0.1 0.9 0.1 5.2 2.2 6.4 0.2 2.2 0.1 0.15 19.8 0.3 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min mm Distance from Operating mounting hole, position mm 2.8 0.8 1.2 8.80.8 Long hinge lever CAD Data 4.0 (P.T.) 3.5 max. 13.1 0.4 12.85 7.7 2.4 +0.1 -0.05 NO NC 1.85 0.2 (O.P.) 8.8 1.2 (O.P.) 12.2 1.3 6.7 C 1.5 0.12 1.1 0.12 3.4 0.15 7.4 2.4 0.75 0.5 2.4 +0.1 -0.05 dia. 9.5 8.7 0.15 15.4 0.15 19.8 0.3 ds_62003_0104_en_avm3: 010812J 0.5 2.5 0.1 0.9 0.1 1.25 0.1 5.2 6.4 0.2 2.2 2.2 0.1 Switches Selector Chart AVM3P Discontinued as of February 29, 2012 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min mm Distance from Operating mounting hole, position mm 3.5 1.0 1.6 8.81.2 3 Discontinued as of February 29, 2012 mm General tolerance: 0.25 Simulated roller lever CAD Data 4.0 .5 (P.T.) 2.8 max. R2 Switches Selector Chart AVM3P 6.3 0.4 12.85 Micro switches IP67 7.7 2.4 +0.1 -0.05 (O.P.) 11.65 0.8 (O.P.) 15.05 0.9 6.7 NO C NC 3.4 1.85 0.2 1.5 0.12 1.1 0.12 0.15 7.4 2.4 2.4 +0.1 -0.05 dia. 0.75 2.5 0.1 0.5 0.5 0.9 9.5 0.1 8.7 0.15 2.2 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min mm Distance from Operating mounting hole, position mm 1.25 0.1 5.2 6.4 0.2 15.4 0.15 2.2 0.1 Micro switches IP40 19.8 0.3 2.8 0.8 1.2 11.650.8 Roller lever CAD Data (P.T.) 2.5 max. 3.2 5.15 0.4 12.85 Micro operation switches 5.0 dia. (O.P.) 14.5 0.8 7.7 2.4 +0.1 -0.05 6.7 NO C NC 1.85 0.2 (O.P.) 17.9 0.9 1.5 0.12 1.1 0.12 3.4 0.15 7.4 2.4 2.4 +0.1 -0.05 dia. 0.75 0.5 2.5 0.1 9.5 0.5 Pretravel, Max. mm Movement differential, Max. mm Overtravel, Min mm Distance from Operating mounting hole, position mm 1.25 0.1 0.9 0.1 5.2 8.7 0.15 2.2 6.4 0.2 2.2 0.1 15.4 0.15 19.8 0.3 2. Self-standing solder terminal Pin plunger With guard CAD Data 0.5 0.8 14.50.8 With opposite side guard (P.T.) 0.6 max. 7.6 0.3 1.8 4.0 -0.05 7.7 2.4 +0.1 NO C 2.5 NC 8* 1.85 (O.P.) 6.7 8.4 0.25 (O.P.) 11.8 0.35 6 . R0 3.4 0.15 1.5 0.12 0.2 8* 24 24 1.1 0.12 7.4 2.4 2.4 2.5 0.1 .8 2.8 8.7 0.15 15.4 0.5 2.4 +0.1 -0.05 dia. R0 9.5 0.1 0.2 5.2 1.25 0.1 6.4 0.2 0.15 2.2 19.8 0.3 * The height from the center of mounting hole to the edge of guard. 4 ds_62003_0104_en_avm3: 010812J 5. Cautions regarding use When switching low-level circuits (6V DC 5mA, 12V DC 2mA, 24V DC 1mA), AV, AV3/AVT3, AVL3 Au clad contact type switches are recommended. When used to switch inductive loads (relays, solenoids, buzzers, etc.), it is recommended that a proper spark quench circuit is inserted in the switch to prevent contact faults caused by electric arcs. Care should be taken that occurrence in AC load possibly shorten the expected life. 6. Quality check under actual loading conditions To assure reliability, check the switch under actual loading conditions. Avoid any situation that may adversely affect switching performance. Switches Selector Chart 2. Soldering operations Manual soldering should be accomplished within 3 seconds with max. 350C iron. Care should be taken not to apply force to the terminals during soldering. Terminal portions must not be moved in min.1 minute after soldering. Also no tensile strength of lead wires should be applied to terminals. 3. Selection of the switch When specifying the switch, allow 20% to the listed operating characteristics. 4. Environment Avoid using the switches in the following conditions; • In corrosive gases, such as silicon gas • In a dusty environment Micro operation switches 1. Fastening of the switch body 1) Use flat filister head M2.3 screws to mount switches with less than a 0.29 N·m torque. Use of screws washers or adhesive lock is recommended to prevent loosening of the screws. 2) Check insulation distance between ground and each terminal. 3) When the operation object is in the free position, force should not be applied directly to the actuator or pin plunger from vertical direction to the switch. 4) In setting the movement after operation, the over-travel should be set more than 70% as a standard. Setting the movement at less than 70% of O.T. may cause troubles such as miscontact and welding due to small contact force of the switch. 5) For a lever type, the force from the reverse and side to the operation direction should not be applied. Micro switches IP67 NOTES Micro switches IP40 AVM3P Discontinued as of February 29, 2012 ds_62003_0104_en_avm3: 010812J 5