AVM34359-A

AV3,AVM3/AVT3,AVL3 NEW SUBMINIATURE SWITCHES WITH HIGH PRECISION FS•FS-T (AV) SWITCHES FEATURES FS • New additions: FS-T Cross-line terminal types Gold-clad double layer types exclusively for low-level circuits • Consistent quality and high precision through sophisticated automatic fabrication system —O.P.: 8.4±0.3 mm .331± .012 inch (O.P.of conventional subminiature switches: 8.4±0.5 .331±.020) • Flux-resistant construction with integrally molded terminals • Solder terminal; Self-standing, internationally common pitch, right angle, left angle terminals for PC board; Quick connect .110 terminals for easy mounting • Insulation guard available for safety mounting FS-T • 2 lever pivot positions available for applications where low operating force is required • UL/CSA/VDE/SEMKO approved (As for gold-clad double layer, VDE and SEMKO are not approved) TYPICAL APPLICATIONS • Communication equipment • Vending machines • Security systems • Data systems • Medical equipment • Cassette tape recorders • VCR PC board thickness: 1.6 mm .063 inch CONSTRUCTION SCHEMATIC (Example: AV3/AVM3 type) Standard version Long life version 2 lever pivot positions Arch-shaped independent spring Spring Solder-terminal Self-standing PC terminal .110 Quick connect terminal Flux resistant construction Optional insulation guard Remark: As for FS-T switches, the terminals are the different shape. 78 COM NO NC AV3,AVM3/AVT3,AVL3 ORDERING INFORMATION 1.FS switches Ex. AV Type of Version switch FS•FS-T 3: Standard switch M3: Long life 3 2 0 Terminals 2 Actuators 1: Self-standing solder terminal with guard 2: Self-standing solder terminal without guard 3: Self-standing solder terminal with opposite side guard 4: Self-standing PC terminal (5: Internationally common pitch PC terminal) (6: Right angle terminal) (7: Left angle terminal) 8: .110 Quick-connect terminal 0: Pin plunger 1: Short hinge lever 2: Hinge lever 3: Long hinge lever 4: Simulated roller lever 5: Roller lever Operating force by pin plunger, max. Standard version: 0: 0.25 N {25 gf} 2: 0.49 N {50 gf} 4: 0.98 N {100 gf} Lever position Contacts Nil: Standard [11: forward] Nil: Standard type 61: Gold-clad triple layer 64: Gold-clad double layer type exlusively for low-level circuits Long life version: 5: 1.47 N {150 gf} 2.FS-T switches Ex. AV Type of Version switch FS•FS-T T3: Standard switch L3: Long life T3 Terminals 2: Solder terminal 4: PC terminal 8: .110 Quick-connect terminal 2 0 Actuators 0: Pin plunger 1: Short hinge lever 2: Hinge lever 3: Long hinge lever 4: Simulated roller lever 5: Roller lever 2 Operating force by pin plunger, max. Standard version: 0: 0.25 N {25 gf} 2: 0.49 N {50 gf} 4: 0.98 N {100 gf} Long life version: 5: 1.47 N {150 gf} Lever position Contacts Nil: Standard [11: forward] Nil: Standard type (Not applicable to 25 gf type) 61: Gold-clad triple layer 64: Gold-clad double layer type exlusively for low-level circuits APPLICABLE CURRENT RANGE Type Contact O.F. Rating 1mA 100mA 3A 5A 0.25 N {25 gf} 0.49 N {50 gf} 0.98 N {100 gf} 1.47 N {150 gf} Silver alloy contact Standard Gold-clad triple layer version contact type Gold-clad double layer contact type Silver alloy contact Long life Gold-clad triple layer version contact type Gold-clad double layer contact type Remark: For high capacity contact rating up to 10.1 A, please refer to PS (AVM3MMMP) switches catalog. 79 AV3,AVM3/AVT3,AVL3 PRODUCT TYPES 1.FS switches (In-line terminal type) Standard type Actuator Pin plunger Short hinge lever Silver alloy contact type Hinge lever Long hinge lever Simulated roller lever Roller lever Pin plunger Short hinge lever Gold-clad triple layer contact type Hinge lever Long hinge lever Simulated roller lever Roller lever Pin plunger Short hinge lever Gold-clad double layer type exclusively for lowlevel circuits Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force, Max. 0.49 N {50 gf} 0.98 N {100 gf} 0.20 N {20 gf} 0.39 N {40 gf} 0.16 N {16 gf} 0.34 N {35 gf} 0.12 N {12 gf} 0.25 N {25 gf} 0.16 N {16 gf} 0.34 N {35 gf} 0.20 N {20 gf} 0.39 N {40 gf} 0.25 N {25 gf} 0.49 N {50 gf} 0.98 N {100 gf} 0.098 N {10 gf} 0.20 N {20 gf} 0.39 N {40 gf} 0.078 N {8 gf} 0.16 N {16 gf} 0.34 N {35 gf} 0.12 N {12 gf} 0.25 N {25 gf} 0.16 N {16 gf} 0.34 N {35 gf} 0.20 N {20 gf} 0.39 N {40 gf} 0.25 N {25 gf} 0.49 N {50 gf} 0.98 N {100 gf} 0.098 N {10 gf} 0.20 N {20 gf} 0.39 N {40 gf} 0.078 N {8 gf} 0.16 N {16 gf} 0.34 N {35 gf} 0.12 N {12 gf} 0.25 N {25 gf} 0.16 N {16 gf} 0.34 N {35 gf} 0.20 N {20 gf} 0.39 N {40 gf} Remark: When ordering, please refer to “Remarks” of ordering information. 80 Part No. Self-standing solder terminal With opposite Without guard With guard side guard AV3202 AV3102 AV3302 AV3204 AV3104 AV3304 AV3212 AV3112 AV3312 AV3214 AV3114 AV3314 AV3222 AV3122 AV3322 AV3224 AV3124 AV3324 AV3232 AV3132 AV3332 AV3234 AV3134 AV3334 AV3242 AV3142 AV3342 AV3244 AV3144 AV3344 AV3252 AV3152 AV3352 AV3254 AV3154 AV3354 AV320061 AV310061 AV330061 AV320261 AV310261 AV330261 AV320461 AV310461 AV330461 AV321061 AV311061 AV331061 AV321261 AV311261 AV331261 AV321461 AV311461 AV331461 AV322061 AV312061 AV332061 AV322261 AV312261 AV332261 AV322461 AV312461 AV332461 AV323261 AV313261 AV333261 AV323461 AV313461 AV333461 AV324261 AV314261 AV334261 AV324461 AV314461 AV334461 AV325261 AV315261 AV335261 AV325461 AV315461 AV335461 AV320064 AV310064 AV330064 AV320264 AV310264 AV330264 AV320464 AV310464 AV330464 AV321064 AV311064 AV331064 AV321264 AV311264 AV331264 AV321464 AV311464 AV331464 AV322064 AV312064 AV332064 AV322264 AV312264 AV332264 AV322464 AV312464 AV332464 AV323264 AV313264 AV333264 AV323464 AV313464 AV333464 AV324264 AV314264 AV334264 AV324464 AV314464 AV334464 AV325264 AV315264 AV335264 AV325464 AV315464 AV335464 Self-standing PC terminal .110 Quickconnect terminal AV3402 AV3404 AV3412 AV3414 AV3422 AV3424 AV3432 AV3434 AV3442 AV3444 AV3452 AV3454 AV340061 AV340261 AV340461 AV341061 AV341261 AV341461 AV342061 AV342261 AV342461 AV343261 AV343461 AV344261 AV344461 AV345261 AV345461 AV340064 AV340264 AV340464 AV341064 AV341264 AV341464 AV342064 AV342264 AV342464 AV343264 AV343464 AV344264 AV344464 AV345264 AV345464 AV3802 AV3804 AV3812 AV3814 AV3822 AV3824 AV3832 AV3834 AV3842 AV3844 AV3852 AV3854 AV380061 AV380261 AV380461 AV381061 AV381261 AV381461 AV382061 AV382261 AV382461 AV383261 AV383461 AV384261 AV384461 AV385261 AV385461 AV380064 AV380264 AV380464 AV381064 AV381264 AV381464 AV382064 AV382264 AV382464 AV383264 AV383464 AV384264 AV384464 AV385264 AV385464 AV3,AVM3/AVT3,AVL3 2.FS-T switches (Cross-line terminal type) Standard type Actuator Pin plunger Short hinge lever Silver alloy contact type Hinge lever Long hinge lever Simulated roller lever Roller lever Pin plunger Short hinge lever Gold-clad triple layer contact type Hinge lever Long hinge lever Simulated roller lever Roller lever Pin plunger Short hinge lever Gold-clad double layer type exclusively for lowlevel circuits Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force, Max. 0.49 N {50 gf} 0.98 N {100 gf} 0.20 N {20 gf} 0.39 N {40 gf} 0.16 N {16 gf} 0.34 N {35 gf} 0.12 N {12 gf} 0.25 N {25 gf} 0.16 N {16 gf} 0.34 N {35 gf} 0.20 N {20 gf} 0.39 N {40 gf} 0.25 N {25 gf} 0.49 N {50 gf} 0.98 N {100 gf} 0.098 N {10 gf} 0.20 N {20 gf} 0.39 N {40 gf} 0.078 N {8 gf} 0.16 N {16 gf} 0.34 N {35 gf} 0.12 N {12 gf} 0.25 N {25 gf} 0.16 N {16 gf} 0.34 N {35 gf} 0.20 N {20 gf} 0.39 N {40 gf} 0.25 N {25 gf} 0.49 N {50 gf} 0.98 N {100 gf} 0.098 N {10 gf} 0.20 N {20 gf} 0.39 N {40 gf} 0.078 N {8 gf} 0.16 N {16 gf} 0.34 N {35 gf} 0.12 N {12 gf} 0.25 N {25 gf} 0.16 N {16 gf} 0.34 N {35 gf} 0.20 N {20 gf} 0.39 N {40 gf} Part No. Solder terminal without guard AVT3202 AVT3204 AVT3212 AVT3214 AVT3222 AVT3224 AVT3232 AVT3234 AVT3242 AVT3244 AVT3252 AVT3254 AVT320061 AVT320261 AVT320461 AVT321061 AVT321261 AVT321461 AVT322061 AVT322261 AVT322461 AVT323261 AVT323461 AVT324261 AVT324461 AVT325261 AVT325461 AVT320064 AVT320264 AVT320464 AVT321064 AVT321264 AVT321464 AVT322064 AVT322264 AVT322464 AVT323264 AVT323464 AVT324264 AVT324464 AVT325264 AVT325464 PC terminal AVT3402 AVT3404 AVT3412 AVT3414 AVT3422 AVT3424 AVT3432 AVT3434 AVT3442 AVT3444 AVT3452 AVT3454 AVT340061 AVT340261 AVT340461 AVT341061 AVT341261 AVT341461 AVT342061 AVT342261 AVT342461 AVT343261 AVT343461 AVT344261 AVT344461 AVT345261 AVT345461 AVT340064 AVT340264 AVT340464 AVT341064 AVT341264 AVT341464 AVT342064 AVT342264 AVT342464 AVT343264 AVT343464 AVT344264 AVT344464 AVT345264 AVT345464 .110 Quick-connect terminal AVT3802 AVT3804 AVT3812 AVT3814 AVT3822 AVT3824 AVT3832 AVT3834 AVT3842 AVT3844 AVT3852 AVT3854 AVT380061 AVT380261 AVT380461 AVT381061 AVT381261 AVT381461 AVT382061 AVT382261 AVT382461 AVT383261 AVT383461 AVT384261 AVT384461 AVT385261 AVT385461 AVT380064 AVT380264 AVT380464 AVT381064 AVT381264 AVT381464 AVT382064 AVT382264 AVT382464 AVT383264 AVT383464 AVT384264 AVT384464 AVT385264 AVT385464 81 AV3,AVM3/AVT3,AVL3 3.FS switches (In-line terminal type) Long life version Operating force, Max. Actuator Silver alloy contact type Gold-clad triple layer contact type Gold-clad double layer type exclusively for lowlevel circuits Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever 1.47 N {150 gf} 0.59 N {60 gf} 0.54 N {55 gf} 0.44 N {45 gf} 0.54 N {55 gf} 0.59 N {60 gf} 1.47 N {150 gf} 0.59 N {60 gf} 0.54 N {55 gf} 0.44 N {45 gf} 0.54 N {55 gf} 0.59 N {60 gf} 1.47 N {150 gf} 0.59 N {60 gf} 0.54 N {55 gf} 0.44 N {45 gf} 0.54 N {55 gf} 0.59 N {60 gf} Part No. Self-standing solder terminal With opposite Without guard With guard side guard AVM3205 AVM3105 AVM3305 AVM3215 AVM3115 AVM3315 AVM3225 AVM3125 AVM3325 AVM3235 AVM3135 AVM3335 AVM3245 AVM3145 AVM3345 AVM3255 AVM3155 AVM3355 AVM320561 AVM310561 AVM330561 AVM321561 AVM311561 AVM331561 AVM322561 AVM312561 AVM332561 AVM323561 AVM313561 AVM333561 AVM324561 AVM314561 AVM334561 AVM325561 AVM315561 AVM335561 AVM320564 AVM310564 AVM330564 AVM321564 AVM311564 AVM331564 AVM322564 AVM312564 AVM332564 AVM323564 AVM313564 AVM333564 AVM324564 AVM314564 AVM334564 AVM325564 AVM315564 AVM335564 Self-standing PC terminal .110 Quickconnect terminal AVM3405 AVM3415 AVM3425 AVM3435 AVM3445 AVM3455 AVM340561 AVM341561 AVM342561 AVM343561 AVM344561 AVM345561 AVM340564 AVM341564 AVM342564 AVM343564 AVM344564 AVM345564 AVM3805 AVM3815 AVM3825 AVM3835 AVM3845 AVM3855 AVM380561 AVM381561 AVM382561 AVM383561 AVM384561 AVM385561 AVM380564 AVM381564 AVM382564 AVM383564 AVM384564 AVM385564 Remark: When ordering, please refer to “Remarks” of ordering information. 4.FS-T switches (Cross-line terminal type) Long life version Actuator Silver alloy contact type Gold-clad triple layer contact type Gold-clad double layer type exclusively for lowlevel circuits Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Pin plunger Short hinge lever Hinge lever Long hinge lever Simulated roller lever Roller lever Operating force, Max. 1.47 N {150 gf} 0.59 N {60 gf} 0.54 N {55 gf} 0.44 N {45 gf} 0.54 N {55 gf} 0.59 N {60 gf} 1.47 N {150 gf} 0.59 N {60 gf} 0.54 N {55 gf} 0.44 N {45 gf} 0.54 N {55 gf} 0.59 N {60 gf} 1.47 N {150 gf} 0.59 N {60 gf} 0.54 N {55 gf} 0.44 N {45 gf} 0.54 N {55 gf} 0.59 N {60 gf} Remark: When ordering, please refer to “Remarks” of ordering information. 82 Part No. Solder terminal Without guard AVL3205 AVL3215 AVL3225 AVL3235 AVL3245 AVL3255 AVL320561 AVL321561 AVL322561 AVL323561 AVL324561 AVL325561 AVL320564 AVL321564 AVL322564 AVL323564 AVL324564 AVL325564 PC terminal AVL3405 AVL3415 AVL3425 AVL3435 AVL3445 AVL3455 AVL340561 AVL341561 AVL342561 AVL343561 AVL344561 AVL345561 AVL340564 AVL341564 AVL342564 AVL343564 AVL344564 AVL345564 .110 Quick-connect terminal AVL3805 AVL3815 AVL3825 AVL3835 AVL3845 AVL3855 AVL380561 AVL381561 AVL382561 AVL383561 AVL384561 AVL385561 AVL380564 AVL381564 AVL382564 AVL383564 AVL384564 AVL385564 AV3,AVM3/AVT3,AVL3 SPECIFICATIONS 1.Contact rating Voltage 125V AC 250V AC 30V DC 125V DC Standard version Gold-clad contact type Silver alloy contact type Triple layer Double layer Resistive load Inductive load Resistive load Resistive load (cosφ]1) (cosφ]0.6-0.7) (cosφ]1) (cosφ]1) 3A 2A 0.1A — 3A 2A 0.1A — 3A 2A 0.1A 0.1A 0.4A 0.05A — — Long life version Gold-clad contact type Silver alloy contact type Triple layer Double layer Resistive load Inductive load Resistive load Resistive load (cosφ]1) (cosφ]0.6-0.7) (cosφ]1) (cosφ]1) 5A 3A 0.1A — 5A 3A 0.1A — 5A 3A 0.1A 0.1A 0.4A 0.05A — — Remark: Time constant shall be less than 7 msec. for DC inductive loads. 2.Characteristics Electrical life at rated load (O.T.max.) Standard version Silver alloy contact type Gold-clad contact type 5 × 104 at 20 cpm 2 × 105 at 20 cpm Long life version Silver alloy contact type Gold-clad contact type 5 × 104 at 20 cpm 2 × 105 at 20 cpm 7 (O.T.: Specified value) 3 × 10 5 × 105 at 60 cpm (O.T.max.) 107 (O.T.max.) at 60 cpm Min.100MΩ at 500V DC Mechanical life Insulation resistance Dielectric strength Between non-continuous terminals Between each terminal and other exposed metal parts Between each terminal and ground Vibration resistance (Pin plunger type) Shock resistance (Pin plunger type) (Contact opening: less than 1 msec.) Contact resistance (Initial) Allowable operating speed Max.operating cycle rate Ambient temeprature Ambient humidity Unit weight 1,000 Vrms 1,500 Vrms 1,500 Vrms 10 to 55 Hz at single amplitude of 1.5mm (Contact opening: max.1 msec.) 294 m/s2 {30 G} min. (O.F. 0.98 N {100 gf}) 294 m/s2 {30 G} min. (O.F. 0.98 N {100 gf}) 147 m/s2 {15 G} min. 294 m/s2 {30 G} min. (O.F. 0.49 N {50 gf}) 147 m/s2 {15 G} min. (O.F. 0.49 N {50 gf}) 49 m/s2 {5 G} min. (O.F. 0.25 N {25 gf}) 50 mΩ max. 100 mΩ max. Au: 50 mΩ max. (by voltage drop 0.1 A 6 to 8V DC) (by voltage drop 1 A (by voltage drop 0.1 A Ag: 50 mΩ max. (by voltage drop 1 A 6 to 8V DC) 6 to 8V DC) 6 to 8V DC) 0.1 to 1,000 mm/sec. 300 cpm –25°C to +85°C –13°F to +185°F (no freezing below 0°C) Max.85% R.H. Approx.2g .07oz 3.Operating characteristics 1) Pin plunger 4th digit number of Part No. 0 2 4 5 O.F.max. R.F.min. P.T.max. M.D.max. O.T.max. 0.25N {25gf} 0.49N {50gf} 0.98N {100gf} 1.47N {150gf} 0.020N {2gf} 0.074N {7.5gf} 0.15N {15gf} 0.20N {20gf} 0.6mm .024inch 0.1mm .004inch 0.4mm .016inch O.F.max. R.F.min. P.T.max. M.D.max. O.T.max. 0.098N {10gf} 0.20N {20gf} 0.39N {40gf} 0.59N {60gf} 0.004N {0.4gf} 0.017N {1.7gf} 0.034N {3.5gf} 0.039N {4.0gf} 2.5mm .098inch 0.5mm .020inch 0.8mm .031inch O.P. Distance from mounting holes: 8.4±0.3mm .331±.012inch Distance from stand-off: FS 11.8±0.4mm .465±.016inch FS-T 11.7±0.4mm .461±.016inch 2) Short hinge lever 4th digit number of Part No. 0 2 4 5 O.P. Distance from mounting holes: 8.8±0.8mm .346±.031inch Distance from stand-off: FS 12.2±0.9mm .480±.035inch FS-T 12.1±0.9mm .476±.035inch 83 AV3,AVM3/AVT3,AVL3 3) Hinge lever 4th digit number of Part No. 0 2 4 5 O.F.max. R.F.min. P.T.max. M.D.max. O.T.max. O.P. 0.078N {8gf} 0.16N {16gf} 0.34N {35gf} 0.54N {55gf} 0.003N {0.35gf} 0.015N {1.5gf} 0.029N {3.0gf} 0.034N {3.5gf} 2.8mm .110inch 0.8mm .031inch 1.2mm .047inch P.T.max. M.D.max. O.T.max. 3.5mm .138inch 1.0mm .039inch 1.6mm .063inch P.T.max. M.D.max. O.T.max. O.P. 2.8mm .110inch 0.8mm .031inch 1.2mm .047inch Distance from mounting holes: 11.65±0.8mm .459±.031inch Distance from stand-off: FS 15.05±0.9mm .593±.035inch FS-T 14.95±0.9mm .589±.035inch P.T.max. M.D.max. O.T.max. O.P. 2.5mm .098inch 0.5mm .020inch 0.8mm .031inch Distance from mounting holes: 8.8±0.8mm .346±.031inch Distance from stand-off: FS 12.2±0.9mm .480±.035inch FS-T 12.1±0.9mm .476±.035inch 4) Long hinge lever 4th digit number of Part No. O.F.max. R.F.min. 0 — — 0.12N {12gf} 0.25N {25gf} 0.44N {45gf} 0.012N {1.2gf} 0.025N {2.5gf} 0.029N {3.0gf} 2 4 5 O.P. Distance from mounting holes: 8.8±1.2mm .346±.047inch Distance from stand-off: FS 12.2±1.3mm .480±.051inch FS-T 12.1±1.3mm .476±.051inch 5) Simulated roller lever 4th digit number of Part No. O.F.max. R.F.min. 0 — — 0.16N {16gf} 0.34N {35gf} 0.54N {55gf} 0.015N {1.5gf} 0.029N {3.0gf} 0.034N {3.5gf} 4th digit number of Part No. O.F.max. R.F.min. 0 — — 0.20N {20gf} 0.39N {40gf} 0.59N {60gf} 0.017N {1.7gf} 0.034N {3.5gf} 0.039N {4.0gf} 2 4 5 6) Roller lever 2 4 5 Distance from mounting holes: 14.5±0.8mm .571±.031inch Distance from stand-off: FS 17.9±0.9mm .705±.035inch FS-T 17.8±0.9mm .701±.035inch mm inch General tolerance ±0.25 ±.010 DIMENSIONS 1.FS switches (In-line terminal type) 1-(1) Self-standing solder terminal Pin plunger PC board pattern ±0.3 7.6 .299 ±.012 (P.T.) 0.6 max. .024 1.8 .071 7.7 +0.1 .303 2.4 -0.05 .094 +.004 -.002 C 7.4 .291 NO 2.4 .094 2.5 ±0.1±.004 .098 9.5 ±0.1 .374 ±.004 8.7 ±0.15 .343 ±.006 15.4 ±0.15 .606 ±.006 19.8 ±0.3 .780 ±.012 84 NC (O.P.) (O.P.) 6.7 8.4 ±0.3 .264 .331±.012 11.8 ±0.4 .465 ±.016 3.4 ±0.15 .134 ±.006 2.4 +0.1 -0.05 dia. .094 +.004 -.002 dia. 0.5 0.9 .020 .035 1.25±0.1 2.2 .087 .049±.004 2.2 ±0.1 .087 ±.004 4.0 .157 3-1.2±0.05 dia. 3-.047±.002 dia. 1.85 ±0.2 .073 ±.008 1.1 ±0.12 .043 ±.005 1.5 ±0.12 .059 ±.005 5.2 .205 6.4 ±0.2 .252 ±.008 8.7±0.1 .343±.004 15.4±0.1 .606±.004 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from standoff, mm inch 0.6 .024 0.1 .004 0.4 .016 8.4±0.3 .331±.012 11.8±0.4 .465±.016 AV3,AVM3/AVT3,AVL3 mm inch General tolerance ±0.25 ±.010 Short hinge lever 12.85 .506 5.0 ±0.4 .197 ±.016 NO 4.0 .157 (O.P.) 8.8 ±0.8±.031 (O.P.) .346 12.2 ±0.9 .480 ±.035 6.6 .260 C (P.T.) 2.5 max. .098 NC Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from standoff, mm inch 2.5 .098 0.5 .020 0.8 .031 8.8±0.8 .346±.031 12.2±0.9 .480±.035 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from standoff, mm inch 2.8 .110 0.8 .031 1.2 .047 8.8±0.8 .346±.031 12.2±0.9 .480±.035 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from standoff, mm inch 3.5 .138 1.0 .039 1.6 .063 8.8±1.2 .346±.047 12.2±1.3 .480±.051 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from standoff, mm inch 2.8 .110 0.8 .031 1.2 .047 11.65±0.8 .459±.031 15.05±0.9 .593±.035 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from standoff, mm inch 2.5 .098 0.5 .020 0.8 .031 14.5±0.8 .571±.031 17.9±0.9 .705±.035 Hinge lever 7.15 ±0.4 .281 ±.016 C NO (P.T.) 2.8 max. .110 4.0 .157 (O.P.) 8.8 ±0.8±.031 (O.P.) .346 12.2 ±0.9 .480 ±.035 NC Long hinge lever 13.1 ±0.4 .516 ±.016 C NO (P.T.) 3.5 max. .138 4.0 .157 (O.P.) 8.8 ±0.8±.031 (O.P.) .346 12.2 ±0.9 .480 ±.035 NC Simulated roller lever 6.3 ±0.4 .248 ±.016 R2.5 .098 (P.T.) 2.8 max. .110 4.0 .157 (O.P.) ±0.8 11.65±.031 (O.P.) ±0.9 .459 15.05±.035 .593 C NO NC Roller lever 5.15 ±0.4 .203 ±.016 (P.T.) 2.5 max. .098 3.2 .126 5.0 dia. .197 (O.P.) 14.5 ±0.8 (O.P.) .571 ±.031 17.9 ±0.9 .705 ±.035 C NO NC 85 AV3,AVM3/AVT3,AVL3 1-(2) Self-standing solder terminal (without guard) mm inch General tolerance ±0.25 ±.010 4.0 .157 1.85 ±0.2 .073 ±.008 ±0.12 1.1 .043 ±.005 1.5 ±0.12 .059 ±.005 ±0.15 3.4 .134 ±.006 NO C NC 7.4 .291 2.8 ±0.2 8.7 ±0.15 .343 ±.006 .110 ±.008 ±0.15 15.4 .606 ±.006 19.8 ±0.3 .780 ±.012 0.5 .020 1.25 ±0.1 .049 ±.004 5.2 .205 6.4 ±0.2 .252 ±.008 Dimensions other than drawn above is same as self-standing PC board terminal. 1-(3) Self-standing solder terminal (with guard) NO C NC 8.0 .315 24.0 .945 Dimensions other than drawn above is same as guardless type. 1-(4) Self-standing solder terminal (with opposite side guard) 8.0 .315 24.0 .945 Dimensions other than drawn above is same as guardless type. 1-(5) .110 Quick-connect terminal 4.0 .157 NO C 7.1 ±0.15 .280 ±.006 11.0 5.5 ±0.1 .433 .217 ±.004 3-1.2 ±0.05 dia. 3-.047 ±.002 dia. NC 2.5 ±0.1 .098 ±.004 3.4 ±0.15 .134 ±.006 6-C0.6 ±0.1±.004 6-C.024 2.8 ±0.1 .110 ±.004 0 4.0 -0.15 0 .157-.006 ±0.1 9.5 .374 ±.004 7.6 ±0.15 .299 ±.006 15.2 ±0.15 .598 ±.006 19.8 ±0.3 .780 ±.012 0.5 .020 5.2 .205 6.4 ±0.2 .252 ±.008 Dimensions other than drawn above is same as self-standing PC board terminal. 2.FS-T switches (Cross-line terminal type) 2-(1) PC board terminal Pin plunger 7.7 .303 3.3 .130 2.4 +0.1 -0.05 .094 +.004 -.002 2.4 .094 PC board pattern 6.7 .264 NO C 2.5 ±0.1±.004 .098 9.5 ±0.1 .374 ±.004 8.8 .346 16.1 .634 19.8 ±0.3 .780 ±.012 86 (P.T.) 0.6 max. .024 7.6 ±0.3 .299 ±.012 4.0 .157 3-1.35 to 1.50 dia. 3-.053 to .059 dia. (O.P.) 8.4 ±0.3 .331±.012 NC 3.2 .126 7.0 .276 2.4 +0.1 -0.05 dia. .094 +.004 -.002 dia. 0.5 .020 ±0.1 6.4 ±0.2 .252 ±.008 1.2 .047 ±.004 10.9 .429 8.8±0.1 (Button position) .346±.004 ±0.1 16.1 .634±.004 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from standoff, mm inch 0.6 .024 0.1 .004 0.4 .016 8.4±0.3 .331±.012 11.7±0.4 .461±.016 AV3,AVM3/AVT3,AVL3 mm inch General tolerance ±0.25 ±.010 Short hinge lever 12.85 .506 5.0 ±0.4 .197 ±.016 (P.T.) 2.5 max. .098 4.0 .157 (O.P.) 8.8 ±0.8±.031 .346 C NO NC Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from standoff, mm inch 2.5 .098 0.5 .020 0.8 .031 8.8±0.8 .346±.031 12.1±0.9 .476±.035 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from standoff, mm inch 2.8 .110 0.8 .031 1.2 .047 8.8±0.8 .346±.031 12.1±0.9 .476±.035 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from standoff, mm inch 3.5 .138 1.0 .039 1.6 .063 8.8±1.2 .346±.047 12.1±1.3 .476±.051 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from standoff, mm inch 2.8 .110 0.8 .031 1.2 .047 11.65±0.8 .459±.031 14.95±0.9 .589±.035 Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Distance from mounting hole, mm inch Operating position Distance from standoff, mm inch 2.5 .098 0.5 .020 0.8 .031 14.5±0.8 .571±.031 17.8±0.9 .701±.035 Hinge lever 12.85 .506 (P.T.) 2.8 max. .110 7.15 ±0.4 .281 ±.016 4.0 .157 (O.P.) 8.8 ±0.8±.031 .346 C NO NC Long hinge lever 13.1 ±0.4 .516 ±.016 (P.T.) 3.5 max. .138 4.0 .157 (O.P.) 8.8 ±1.2±.047 .346 C NO NC Simulated roller lever 12.85 .506 6.3 ±0.4 .248 ±.016 R2.5 .098 (P.T.) 2.8 max. .110 4.0 .157 (O.P.) ±0.8 11.65±.031 .459 NO C NC Roller lever 5.15 ±0.4 .203 ±.016 (P.T.) 2.5 max. .098 3.2 .126 5.0 dia. .197 (O.P.) 14.5 ±0.8 .571 ±.031 C NO NC 87 AV3,AVM3/AVT3,AVL3 mm inch General tolerance ±0.25 ±.010 2-(2) Self-standing solder terminal (P.T.) 0.6 max. .024 7.6 ±0.3 .299 ±.012 (O.P.) 6.7 8.4 ±0.3 .264 .331±.012 NO C 2.4 .094 NC 2.5 ±0.1 .098 ±.004 0.5 .020 9.5 ±0.1 .374 ±.004 8.8 .346 16.1 .634 19.8 ±0.3 .780 ±.012 (3.9) (.154) 1.8 .07 dia. 1d ia. 2.4 +0.1 -0.05 dia. .094 +.004 -.002 dia. 6.4 .252 6 6- -C C 0. .0 3 12 +0.1 7.7 2.4 -0.05 +.004 .303 .094 -.002 3.3 .130 4.0 .157 1.5 .059 2.8 ±0.2 .110 ±.008 6.4 ±0.2 .252 ±.008 As for the dimensions of lever types, dimensions other than terminals are same as self-standing solder terminal. 2-(3) .110 Quick-connect terminal (P.T.) 0.6 max. .024 7.6 ±0.3 .299 ±.012 7.7 .303 (O.P.) 6.7 8.4 ±0.3 .264 .331±.012 2.4 +0.1 -0.05 +.004 .094 -.002 3.3 .130 NO C 2.4 .094 4.0 .157 2.5 ±0.1 .098 ±.004 9.5 ±0.1 .374 ±.004 8.8 .346 16.1 .634 19.8 ±0.3 .780 ±.012 NC 2.4 +0.1 -0.05 dia. .094 +.004 -.002 dia. 0.5 .020 11.0 5.5 ±0.1±.004 .433 7.1 ±0.15 .217 .280 ±.006 1.2 ±0.05 dia. .047 ±.002 dia. 2.8 ±0.1 .110±.004 6.4 ±0.2 .252 ±.008 As for the dimensions of lever types, dimensions other than terminals are same as self-standing solder terminal. 88 AV3,AVM3/AVT3,AVL3 NOTES 1.Regarding fastening of switch body In fastening the switch body, use flat filister head M2.3 screws, with tightening torque of not more than 3 kg-cm.To prevent loosening of the screws, it is recommended that spring washers be used with the screws and adhesive be applied to lock the screws. After mounting the switch and making wiring connectors, the insulation distance between ground and each terminal should be confirmed as sufficient. The positioning of the switch should be such that the pushbutton or actuator for the switch should not directly apply force to the operating section in the free condition.For a pushbutton, the force from the pushbutton should be applied in a perpendicular direction. In setting the movement after operation, the over-travel should be set not less than 70% as a standard.Setting the movement at less than 70% of O.T.may cause troubles such as mis-contact and welding due to small contact force of the switch. N.C. side Stroke Contact 0 force N.O. side 70% of O.T. specified value P.T. Usable area O.T. spedified value O.T. max. 2.Soldering operation For manual soldering: 60W soldering iron, soldering completed within 3 seconds; do not apply force to the terminals. For automatic soldering tank: 250°C +482°F immersion, completed within 6 seconds, 350°C +662°F immersion, completed within 3 seconds. Terminal portions must not be moved in min.1 minutes after soldering.Also no tensile strength of lead wires should be applied to terminals. 3.Regarding connector connections (.110 quick connect terminals) For making connections, a dedicated receptacle for .110 quick connect terminals should be used, and the terminals should be inserted parallel to the receptacle.Consideration should be given to mounting so that no tensile load is applied to the lead wires. 4.In making the switch selection Consideration should be given to provide for no interference up to +20% variation of the standard characteristics values. 5.Environment Locations where corrosive gases having a bad influence on contacts are present, and locations where there is an excessive amount of siliceous or other abrasive dust should be avoided. 6.Cautions regarding use This subminiatures switch has been designed as a dedicated switch for AC use, but it can be used for low capacity DC circuits. Please select gold-clad contact types when loads are in the low-level area of 1mA up to 100mA and 5V up to 30V. 3A Ag 100 mA Au (-61) Triple layer contact type Au (-64) Double layer contac type 1 mA 0 DC AC 5 5 15 30V 30 250V For switching of inductive loads (relays, solenoids, buzzers, etc.), in order to prevent damage to contacts due to the occurrence of arcing, an arc absorbing circuit should be applied 7.Quality check under Actual Loading Condition To assure reliability, check the switch under actual loading conditions.Avoid any situation that may adversely affect switching performance. 8.When using lever type switch, care should be taken not to apply undue force on the body from the opposite side or side ways to its operating direction. 89 AV3MMMG FS (AV3MMMG) SWITCHES SUBMINIATURE SWITCHES (Contact gap: more than 1mm .039inch type) FEATURES • Conforming to IEC950 • Contact gap of greater than 1mm .039inch • UL/CSA/VDE/SEMKO under application TYPICAL APPLICATIONS • Office equiment (printers, copiers) ORDERING INFORMATION Ex. AV 3 2 5 5 G Type of switch Version Terminals Actuators FS switch 3: Standard 2: Self-standing solder terminal without guard 4: Self-standing PC terminal 8: .110 Quick-connect terminal 0: Pin plunger 1: Short hinge lever 2: Hinge lever 3: Long hinge lever 4: Simulated roller lever 5: Roller lever Operating force by pin plunger, max. 5: 1.47 N {150 gf} Contact gap G: More than 1 mm type PRODUCT TYPES Operating force Max. Solder terminal Pin plunger 1.47 N {150 gf} Short hinge lever Hinge lever Actuator PC board terminal .110 Quick- connect terminal AV3205G3 AV3405G3 AV3805G3 0.59 N {60 gf} AV3215G3 AV3415G3 AV3815G3 0.54 N {55 gf} AV3225G3 AV3425G3 AV3825G3 Long hinge lever 0.44 N {45 gf} AV3235G3 AV3435G3 AV3835G3 Simulated roller lever 0.54 N {55 gf} AV3245G3 AV3445G3 AV3845G3 Roller lever 0.59 N {60 gf} AV3255G3 AV3455G3 AV3855G3 Without guard Remark: Unless you request otherwise, the switch comes with a stamp indicating its conformance to standards. SPECIFICATIONS 1. Contact rating • Silver alloy contact type 90 Voltage Resistive road (cos φ]1) 30 V DC 3A AV3MMMG 2. Characteristics Item Characteristics Expected life Breakdown voltage Mechanical (O.T.: Specified value) Min. 5 × 105 (at 60cpm) Electrical (O.T. max.) Min. 104 (at 20cpm) Between non-continuous terminals 1,000 Vrms for 1 min. (at 10mA) Between each terminal and other exposed metal parts 2,000 Vrms for 1 min. (at 10mA) Between each terminal and ground 2,000 Vrms for 1 min. (at 10mA) Insulation resistance Min. 100MΩ (at 500 V DC) Contact resistance (Initial) Max. 50mΩ (by voltage drop 6 to 8 V DC 1A) Vibration resistance 10 to 55 Hz at single amplitude of 0.75 mm (Contact opening: Max. 1 msec.) Shock resistance Pin plunger type 294m/s2 {30G} (Contact distance: Max. 1 msec.) Lever type 147m/s2 {15G} (Contact distance: Max. 1 msec.) Allowable operation speed (No load) 0.1 to 1,000 mm/s Max. switching frequency (No load) 300 cpm. Ambient temperature –25°C to +85°C –13°F to +185°F (Not freezing below 0°C 32°F) Ambient humidity Max. 85% R.H. Remark: Test conditions are in accordance with JIS C 4505. 3. Operating characteristics Operating force, Max. Release force, Min. Pretravel, Max. mm inch Movement differential, Max. mm inch Overtravel, Min. mm inch Operating position, mm inch Pin plunger 1.47 N {150 gf} 0.064 N {6.5 gf} 0.7 .028 0.2 .008 0.3 .012 8.4±0.3 .331±.012 Short hinge lever 0.59 N {60 gf} 0.015 N {1.5 gf} 2.5 .098 0.8 .031 0.6 .024 8.8±0.8 .346±.031 Hinge lever 0.54 N {55 gf} 0.013 N {1.3 gf} 2.8 .110 1.0 .039 0.8 .031 8.8±0.8 .346±.031 Long hinge lever 0.44 N {45 gf} 0.0098 N {1.0 gf} 3.5 .138 1.2 .047 1.2 .047 8.8±1.2 .346±.047 Simulated roller lever 0.54 N {55 gf} 0.013 N {1.3 gf} 2.8 .110 1.0 .039 0.8 .031 11.65±0.8 .459±.031 Roller lever 0.59 N {60 gf} 0.015 N {1.5 gf} 2.5 .098 0.8 .031 0.6 .024 14.5±0.8 .571±.031 Actuator DIMENSIONS The same size as the standard FS/FS-T switches. Please refer to “FS/FS-T switches pages” or our web site. URL: http://www.mew.co.jp/e-acg/ 91