For board-to-board For board-to-FPC
P5KF
Narrow pitch connectors
(0.5mm pitch)
m
3m
3.
m
8m
5.
Socket
2. Strong resistance to adverse
environments! Utilizes
“
” construction
for high contact reliability.
3. Simple lock structure provides
tactile feedback to ensure excellent
mating/unmating operation feel.
Header
5. The lower connector bottom surface
construction prevents contact and
shorts between the PCB and metal
terminals.
Benefits include freedom in pattern
wiring, helping to make PCB’s smaller.
Simple lock mechanism
RoHS compliant
Insulation area
Insulation area
Connector bottom:
Create any thru-hole and pattern wiring.
FEATURES
4. Effective mating length 0.55mm
In addition to achieving a low profile of
from 1.5mm between PCBs, the effective
mating length has been extended to
ensure that there is latitude for insertion.
1. Two-piece structure and 0.5mm
pitch.
The product lineup includes mated
heights of 1.5mm, 2.0mm and 2.5mm.
APPLICATIONS
• Digital devices, such as digital still
cameras and digital video cameras.
• Various wireless module units.
0.55mm
ORDERING INFORMATION
AXK
4
7
Y
G
5F: Narrow Pitch Connector P5KF (0.5 mm pitch) Socket
6F: Narrow Pitch Connector P5KF (0.5 mm pitch) Header
Number of pins (2 digits)
Mated height
3: For mated height 1.5 mm
5: For mated height 2.0 mm and 2.5 mm
3: For mated height 1.5 mm and 2.0 mm
5: For mated height 2.5 mm
Functions
4: Without positioning bosses
Surface treatment (Contact portion / Terminal portion)
7: Ni plating on base, Au plating on surface/Ni plating on base, Au plating on surface (for Ni barrier available)
Contact portion
Y: V notch type product
Y: V notch type product
Packing
G: 2,000 pieces embossed tape and plastic reel × 2
–1–
ACCTB23E 201602-T
Narrow pitch connectors P5KF (0.5mm pitch)
PRODUCT TYPES
Mated height
1.5 mm
2.0 mm
2.5 mm
No. of pins
10
12
14
16
18
20
22
24
26
30
32
34
40
50
60
70
80
10
12
14
16
18
20
22
24
26
30
34
40
50
60
70
80
100
10
12
14
16
20
22
24
30
34
40
50
60
70
80
100
Part No.
Socket
AXK5F10347YG
AXK5F12347YG
AXK5F14347YG
AXK5F16347YG
AXK5F18347YG
AXK5F20347YG
AXK5F22347YG
AXK5F24347YG
AXK5F26347YG
AXK5F30347YG
AXK5F32347YG
AXK5F34347YG
AXK5F40347YG
AXK5F50347YG
AXK5F60347YG
AXK5F70347YG
AXK5F80347YG
AXK5F10547YG
AXK5F12547YG
AXK5F14547YG
AXK5F16547YG
AXK5F18547YG
AXK5F20547YG
AXK5F22547YG
AXK5F24547YG
AXK5F26547YG
AXK5F30547YG
AXK5F34547YG
AXK5F40547YG
AXK5F50547YG
AXK5F60547YG
AXK5F70547YG
AXK5F80547YG
AXK5F00547YG
AXK5F10547YG
AXK5F12547YG
AXK5F14547YG
AXK5F16547YG
AXK5F20547YG
AXK5F22547YG
AXK5F24547YG
AXK5F30547YG
AXK5F34547YG
AXK5F40547YG
AXK5F50547YG
AXK5F60547YG
AXK5F70547YG
AXK5F80547YG
AXK5F00547YG
Header
AXK6F10347YG
AXK6F12347YG
AXK6F14347YG
AXK6F16347YG
AXK6F18347YG
AXK6F20347YG
AXK6F22347YG
AXK6F24347YG
AXK6F26347YG
AXK6F30347YG
AXK6F32347YG
AXK6F34347YG
AXK6F40347YG
AXK6F50347YG
AXK6F60347YG
AXK6F70347YG
AXK6F80347YG
AXK6F10347YG
AXK6F12347YG
AXK6F14347YG
AXK6F16347YG
AXK6F18347YG
AXK6F20347YG
AXK6F22347YG
AXK6F24347YG
AXK6F26347YG
AXK6F30347YG
AXK6F34347YG
AXK6F40347YG
AXK6F50347YG
AXK6F60347YG
AXK6F70347YG
AXK6F80347YG
AXK6F00347YG
AXK6F10547YG
AXK6F12547YG
AXK6F14547YG
AXK6F16547YG
AXK6F20547YG
AXK6F22547YG
AXK6F24547YG
AXK6F30547YG
AXK6F34547YG
AXK6F40547YG
AXK6F50547YG
AXK6F60547YG
AXK6F70547YG
AXK6F80547YG
AXK6F00547YG
Packing
Inner carton (1-reel)
2,000 pieces
Outer carton
4,000 pieces
Notes: 1. Regarding ordering units, During production: Please make orders in 1-reel units.
For samples, please contact our sales office.
2. The standard type comes without positioning bosses. Connectors with positioning bosses are available for on-demand production.
–2–
ACCTB23E 201602-T
Narrow pitch connectors P5KF (0.5mm pitch)
SPECIFICATIONS
1. Characteristics
Item
Rated current
Rated voltage
Electrical
Dielectric strength
characteristics Insulation resistance
Specifications
0.5A/pin contact (Max. 10 A at total pin contacts)
60V AC/DC
150V AC for 1 minute
Detection current: 1mA
Min. 1,000MΩ (initial)
Using 500V DC megger
Contact resistance
Based on the contact resistance measurement method specified by
JIS C 5402.
Max. 90mΩ
Composite insertion force
Mechanical
Composite removal force
characteristics
Contact holding force
Max. 0.981N/pin contacts × pin contacts (initial)
Min. 0.0588N/pin contacts × pin contacts
Min. 0.981N/pin contact
Ambient temperature
–55°C to +85°C
Soldering heat resistance
Storage temperature
Conditions
Max. peak temperature of 260°C (on the surface
of the PC board around the connector terminals)
300°C within 5 seconds, 350°C within 3 seconds
–55°C to +85°C (product only)
–40°C to +50°C (emboss packing)
Measuring the maximum force.
As the contact & post is axially pull out.
No icing or condensation.
Infrared reflow soldering
Soldering iron
No icing or condensation.
Conformed to MIL-STD-202F, method 107G
Environmental Thermal shock resistance
characteristics (header and socket mated)
Humidity resistance
(header and socket mated)
Saltwater spray resistance
(header and socket mated)
H2S resistance
(header and socket mated)
Lifetime
Insertion and removal life
characteristics
5 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
Order Temperature (°C)
1
–55 −30
2
3
85 +30
4
–55 −30
Time (minutes)
30
Max. 5
30
Max. 5
120 hours, insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
24 hours, insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
Conformed to IEC60068-2-78
Bath temperature 40°C±2°C, humidity 90% to 95% R.H.
Conformed to IEC60068-2-11
Bath temperature 35°C±2°C, saltwarter concentration 5%±1%
48 hours,
Bath temperature 40°C±2°C, gas concentration 3 ppm ±1 ppm,
humidity 75% to 80% R.H.
contact resistance max. 90mΩ
50 times
Repeated insertion and removal speed of max. 200 times/hours
Mated height 1.5mm, 20 pin contacts;
Socket: 0.06g
Header: 0.04g
Unit weight
2. Material and surface treatment
Part name
Molded portion
Material
LCP resin (UL94V-0)
Contact/Post
Copper alloy
Surface treatment
—
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)
The section close to the soldering portion has a nickel barrier.
(The nickel base is exposed.)
–3–
ACCTB23E 201602-T
Narrow pitch connectors P5KF (0.5mm pitch)
DIMENSIONS (Unit: mm)
The CAD data of the products with a
CAD Data
mark can be downloaded from: http://industrial.panasonic.com/ac/e/
• Socket (Mated height: 1.5mm, 2.0mm, 2.5mm)
CAD Data
A
0.50±0.05
Dimension table (mm)
No. of pins
10
12
14
16
18
20
22
24
26
30
32
34
40
50
60
70
80
100
A
5.50
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.50
11.00
11.50
13.00
15.50
18.00
20.50
23.00
28.00
0.10
B±0.1
0.50±0.05
C
0.20±0.03
B
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
7.00
7.50
8.00
9.50
12.00
14.50
17.00
19.50
24.50
(0.80)
1.70
(Suction face) 4.80
4.20
5.80
(0.80)
0.12±0.03
General tolerance: ±0.2
Mated height
1.5 mm
2.0 mm, 2.5 mm
C
1.35
1.85
• Header (Mated height: 1.5mm, 2.0mm, 2.5mm)
CAD Data
A
0.10
C
1.80
0.12±0.03
3.30
0.50±0.05
0.20±0.03
B
2.00
2.50
3.00
3.50
4.00
4.50
5.00
5.50
6.00
7.00
7.50
8.00
9.50
12.00
14.50
17.00
19.50
24.50
(Suction
face)
2.50
A
5.50
6.00
6.50
7.00
7.50
8.00
8.50
9.00
9.50
10.50
11.00
11.50
13.00
15.50
18.00
20.50
23.00
28.00
0.96
No. of pins
10
12
14
16
18
20
22
24
26
30
32
34
40
50
60
70
80
100
(0.75)
0.50±0.05
Dimension table (mm)
(0.75)
B±0.1
General tolerance: ±0.2
Mated height
1.5 mm, 2.0 mm
2.5 mm
C
1.25
1.75
• Socket and header are mated
Mated height: 1.5 mm
Mated height: 2.0 mm
2.00±0.15
1.50±0.15
–4–
Mated height: 2.5 mm
2.50±0.15
ACCTB23E 201602-T
Narrow pitch connectors P5KF (0.5mm pitch)
EMBOSSED TAPE DIMENSIONS (unit: mm)
• Tape dimensions (Conforming to JIS C 0806:1990.
However, some tapes have mounting hole pitches that do
not comply with the standard.)
Tape I
Tape II
A±0.3
Taping reel
D±1
A±0.3
C
Label
B
C
Pull out direction
4
2
12.0
1.5+0.1
0 dia.
Top cover tape
1.75
380 dia.
1.75
Pull out direction
• Plastic reel dimensions (Conforming to EIAJ ET–7200B)
4
2
Embossed carrier tape
Embossed mounting-hole
12.0
1.5+0.1
0 dia.
Dimension table (mm)
Suffix: G (1 reel, 2,000 pieces embossed tape: Plastic reel package)
Mated height
No. of pins
Type of taping
A
B
C
D
Quantity per reel
Socket and header are common:
1.5mm, 2.0mm, 2.5mm
10 to 58
60 to 70
72 to 100
Tape I
Tape II
Tape II
24.0
32.0
44.0
—
28.4
40.4
11.5
14.2
20.2
25.4
33.4
45.4
2,000 pcs.
2,000 pcs.
2,000 pcs.
Connector orientation with respect to direction of progress of embossed tape
Type
Common for P5KF
Direction of
tape progress
Socket
Header
Note: There is no indication on this product regarding top-bottom or left-right orientation.
–5–
ACCTB23E 201602-T
Narrow pitch connectors P5KF (0.5mm pitch)
NOTES
• Socket
• Header
Recommended PC board pattern
(TOP VIEW)
B±0.05
0.50±0.05
0.25±0.05
0.50±0.05
B±0.05
0.50±0.05
0.25±0.05
1.60±0.05
4.30±0.05
0.50±0.05
Recommended PC board pattern
(TOP VIEW)
4.00±0.05
6.80±0.05
1. As shown below, excess force
during insertion may result in damage
to the connector or removal of the
solder. Also, to prevent connector
damage please confirm the correct
position before mating connectors.
2. Keep the PC board warp no more
than 0.03 mm in relation to the overall
length of the connector.
0.125±0.05
0.30±0.05
0.125±0.05
0.30±0.05
Metal mask thickness: When 150 μm
(Opening area ratio: 58%)
4.30±0.01
(0.85)
(0.85)
B±0.01
0.50±0.01
0.50±0.01
0.23±0.01
(0.85)
(0.85)
5.10±0.01
6.80±0.01
B±0.01
0.50±0.01
0.50±0.01
0.23±0.01
2.60±0.01
Recommended metal mask pattern
Metal mask thickness: When 150 μm
(Opening area ratio: 56%)
Recommended metal mask pattern
Metal mask thickness: When 120 μm
(Opening area ratio: 69%)
Metal mask thickness: When 120 μm
(Opening area ratio: 72%)
B±0.01
0.50±0.01
0.50±0.01
0.23±0.01
(1.05)
B±0.01
0.50±0.01
0.50±0.01
0.23±0.01
(1.05)
4.30±0.01
2.20±0.01
Recommended metal mask pattern
(1.05)
3. Recommended PC board and metal
mask patterns
Connectors are mounted with high pitch
density, intervals of 0.35 mm, 0.4 mm or
0.5 mm.
In order to reduce solder and flux rise,
solder bridges and other issues make
sure the proper levels of solder is used.
The figures to the right are recommended
metal mask patterns. Please use them as
a reference.
Recommended metal mask pattern
4.70±0.01
6.80±0.01
Max. 0.03mm
(1.05)
Max. 0.03mm
* See the dimension table on page 4 for more information on the B dimension of the socket and header.
Please refer to the latest product
specifications when designing your
product.
–6–
ACCTB23E 201602-T
For board-to-board/board-to-FPC
Notes on Using Narrow pitch Connectors/
High Current Connectors
About safety Remarks
1) Do not use these connectors beyond
the specification sheets. The usage
outside of specified rated current,
dielectric strength, and environmental
conditions and so on may cause circuitry
damage via abnormal heating, smoke,
and fire.
2) In order to avoid accidents, your
thorough specification review is
appreciated.
Please contact us if your usage is out of
the specifications. Otherwise, Panasonic
Corporation cannot guarantee the quality
and reliability.
3) Panasonic Corporation is consistently
striving to improve quality and reliability.
However, the fact remains that electrical
components and devices generally cause
failures at a given statistical probability.
Furthermore, their durability varies with
use environments or use conditions. In
this respect, please check for actual
electrical components and devices under
actual conditions before use.
Continued usage in a state of degraded
condition may cause the deteriorated
insulation, thus result in abnormal heat,
smoke or firing. Please carry out safety
design and periodic maintenance
including redundancy design, design for
fire spread prevention, and design for
malfunction prevention so that no
accidents resulting in injury or death, fire
accidents, or social damage will be
caused as a result of failure of the
products or ending life of the products.
Regarding the design of devices and PC board patterns
1) When using the board to board
connectors, do not connect a pair of
board with multiple connectors.
Otherwise, misaligned connector
positions may cause mating failure or
product breakage.
2) With mounting equipment, there may
be up to a ±0.2 to 0.3-mm error in
positioning. Be sure to design PC boards
and patterns while taking into
consideration the performance and
abilities of the required equipment.
3) Some connectors have tabs embossed
on the body to aid in positioning. When
using these connectors, make sure that
the PC board is designed with positioning
holes to match these tabs.
4) To ensure the required mechanical
strength when soldering the connector
terminals, make sure the PC board
meets recommended PC board pattern
design dimensions given.
5) PC board
Control the thicknesses of the coverlay
and adhesive to prevent poor soldering.
This connector has no stand-off.
Therefore, minimize the thickness of the
coverlay, etc. so as to prevent the
occurrence of poor soldering.
6) For all connectors of the narrow pitch
series, to prevent the PC board from
coming off during vibrations or impacts,
and to prevent loads from falling directly
on the soldered portions, be sure to
design some means to fix the PC board
in place.
Example) Secure in place with screws
Screw
Connector
Spacer
PC board
Spacer
When connecting PC boards, take
appropriate measures to prevent the
connector from coming off.
7) When mounting connectors on a FPC
board:
• When the connector soldered to FPC is
mated or unmated, solder detachment
may occur by the force to the terminals.
Connector handling is recommended in
the condition when the reinforcing plate is
attached to the backside of FPC where
the connector is mounted. The external
dimension of the reinforcing plate is
recommended to be larger than the
dimension of “PC board recommended
process pattern” (extended dimension of
one side is approximately 0.5 to 1.0 mm).
The materials and thickness of the
reinforcing plate are glass epoxy or
polyimide (thickness 0.2 - 0.3 mm) or
SUS (thickness 0.1 - 0.2 mm).
• As this connector has temporary locking
structure, the connector mating may be
separated by the dropping impact
depend on the size, weight or bending
force of the FPC. Please consider the
measures at usage to prevent the mating
separation.
8) The narrow pitch connector series is
designed to be compact and thin.
Although ease of handling has been
taken into account, take care when
mating the connectors, as displacement
or angled mating could damage or
deform the connector.
Regarding the selection of the connector placement machine and the mounting
procedures
1) Select the placement machine taking
into consideration the connector height,
required positioning accuracy, and
packaging conditions.
2) Be aware that if the chucking force of
the placement machine is too great, it
may deform the shape of the connector
body or connector terminals.
3) Be aware that during mounting,
external forces may be applied to the
connector contact surfaces and terminals
and cause deformations.
4) Depending on the size of the
connector being used, self alignment
may not be possible. In such cases, be
sure to carefully position the terminal with
the PC board pattern.
5) The positioning bosses give an
approximate alignment for positioning on
the PC board. For accurate positioning of
the connector when mounting it to the PC
board, we recommend using an
automatic positioning machine.
–1–
6) In case of dry condition, please note
the occurrence of static electricity.
The product may be adhered to the
embossed carrier tape or the cover tape
in dry condition.
Recommended humidity is from 40%RH
to 60%RH and please remove static
electricity by ionizer in manufacturing
process.
ACCTB48E 201606-T
Notes on Using Narrow pitch Connectors/High Current Connectors
Regarding soldering
Terminal
Paste
solder
PC board
foot pattern
5) When mounting on both sides of the
PC board and the connector is mounting
on the underside, use adhesives or other
means to ensure the connector is
properly fixed to the PC board. (Double
reflow soldering on the same side is
possible.)
6) The condition of solder or flux rise and
wettability varies depending on the type
of solder and flux. Solder and flux
characteristics should be taken into
consideration and also set the reflow
temperature and oxygen level.
7) Do not use resin-containing solder.
Otherwise, the contacts might be firmly
fixed.
8) Soldering conditions
Please use the reflow temperature profile
conditions recommended below for
reflow soldering. Please contact us
before using a temperature profile other
than that described below (e.g. lead-free
solder).
3) Touch the soldering iron to the foot
pattern. After the foot pattern and
connector terminal are heated, apply the
solder wire so it melts at the end of the
connector terminals.
Apply the solder
wire here
Upper limited (Solder heat resistance)
Lower limited (Solder wettability)
Terminal
Temperature
Peak temperature 260°C
230°C
180°C
150°C
So
ld
iro erin
n g
■ Reflow soldering
1) Measure the recommended profile
temperature for reflow soldering by
placing a sensor on the PC board near
the connector surface or terminals.
(Please refer to the specification for detail
because the temperature setting differs
by products.)
2) As for cream solder printing, screen
printing is recommended.
3) When setting the screen opening area
and PC board foot pattern area, refer the
recommended PC board pattern and
window size of metal mask on the
specification sheet, and make sure that
the size of board pattern and metal mask
at the base of the terminals are not
increased.
4) Please pay attentions not to provide
too much solder. It makes miss mating
because of interference at soldering
portion when mating.
Small angle as
possible up to
45 degrees
Peak temperature
Preheating
220°C
200°C
PC board
25 sec.
60 to 120 sec.
70 sec.
Time
For products other than the ones above,
please refer to the latest product
specifications.
9) The temperature profiles given in this
catalog are values measured when using
the connector on a resin-based PC
board. When performed reflow soldering
on a metal board (iron, aluminum, etc.) or
a metal table to mount on a FPC, make
sure there is no deformation or
discoloration of the connector before
mounting.
10) Consult us when using a screenprinting thickness other than that
recommended.
■ Hand soldering
1) Set the soldering iron so that the tip
temperature is less than that given in the
table below.
Table A
Product name
Soldering iron temperature
SMD type connectors
300°C within 5 sec.
350°C within 3 sec.
Pattern
4) Be aware that soldering while applying
a load on the connector terminals may
cause improper operation of the
connector.
5) Thoroughly clean the soldering iron.
6) Flux from the solder wire may get on
the contact surfaces during soldering
operations. After soldering, carefully
check the contact surfaces and clean off
any solder before use.
7) These connector is low profile type. If
too much solder is supplied for hand
soldering, It makes miss mating because
of interference at soldering portion.
Please pay attentions.
■ Solder reworking
1) Finish reworking in one operation.
2) In case of soldering rework of bridges.
Don’t use supplementary solder flux.
Doing so may cause contact problems by
flux.
3) Keep the soldering iron tip temperature
below the temperature given in Table A.
2) Do not allow flux to spread onto the
connector leads or PC board. This may
lead to flux rising up to the connector
inside.
Handling Single Components
1) Make sure not to drop or allow parts to
fall from work bench.
2) Excessive force applied to the
terminals could cause warping, come
out, or weaken the adhesive strength of
the solder. Handle with care.
3) Do not insert or remove the connector
when it is not soldered. Forcibly applied
external pressure on the terminals can
weaken the adherence of the terminals to
the molded part or cause the terminals to
lose their evenness.
Precautions for mating
This product is designed with ease of
handling. However, in order to prevent the
deformation or damage of contacts and
molding, take care and do not mate the
connectors as shown right.
Press-fitting while the mating
inlets of the socket and
header are not matched.
Strongly pressed and twisted
Tilted mating
–2–
ACCTB48E 201606-T
Notes on Using Narrow pitch Connectors/High Current Connectors
Cleaning flux from PC board
There is no need to clean this product.
If cleaning it, pay attention to the
following points to prevent the negative
effect to the product.
1) Keep the cleaning solvent clean and
prevent the connector contacts from
contamination.
2) Some cleaning solvents are strong and
they may dissolve the molded part and
characters, so pure water passed liquid
solvent is recommended.
Handling the PC board after mounting the connector
When cutting or bending the PC board
after mounting the connector, be careful
that the soldered sections are subjected
to excessive force.
The soldered areas should not be subjected to force.
Storage of connectors
1) To prevent problems from voids or air
pockets due to heat of reflow soldering,
avoid storing the connectors in areas of
high humidity.
2) Depending on the connector type, the
color of the connector may vary from
connector to connector depending on
when it is produced.
Some connectors may change color
slightly if subjected to ultraviolet rays
during storage. This is normal and will not
affect the operation of the connector.
3) When storing the connectors with the
PC boards assembled and components
alreeady set, be careful not to stack them
up so the connectors are subjected to
excessive forces.
4) Avoid storing the connectors in
locations with excessive dust. The dust
may accumulate and cause improper
connections at the contact surfaces.
4) When coating the PC board after
soldering the connector to prevent the
deterioration of insulation, perform the
coating in such a way so that the coating
does not get on the connector.
5) There may be variations in the colors
of products from different production lots.
This is normal.
6) The connectors are not meant to be
used for switching.
7) Product failures due to condensation
are not covered by warranty.
Other Notes
1) Do not remove or insert the electrified
connector (in the state of carrying current
or applying voltage).
2) Dropping of the products or rough
mishandling may bend or damage the
terminals and possibly hinder proper
reflow soldering.
3) Before soldering, try not to insert or
remove the connector more than
absolutely necessary.
Regarding sample orders to confirm proper mounting
When ordering samples to confirm
proper mounting with the placement
machine, connectors are delivered in 50piece units in the condition given right.
Consult a sale representative for ordering
sample units.
Please refer to the latest product
specifications when designing your
product.
Condition when delivered from manufacturing
Reel
Embossed tape
amount required for
the mounting
Required number
of products for
sample production
(Delivery can also be made on a reel by
customer request.)
(Unit 50 pcs.)
–3–
ACCTB48E 201606-T