AXK5L24347G

AXK(5/6)L Discontinued Discontinued as as of of September September 30, 30, 2013 2013 For board-to-board Narrow pitch connectors (0.5mm pitch) m m 3m 8m 3. 5. Socket Header Products are discontinued. P5KL Series FEATURES APPLICATIONS 1. Low profile mated height of 1.2 mm and 0.5 mm pitch contributes to device miniaturization. 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability. 3. Simple lock structure provides tactile feedback to ensure excellent mating/unmating operation feel. Digital devices, such as digital still cameras and digital video cameras. Simple lock mechanism 4. Effective mating length 0.3 mm 0.3mm ORDERING INFORMATION AXK 3 7 G 5L: Narrow Pitch Connector P5KL (0.5 mm pitch) Socket 6L: Narrow Pitch Connector P5KL (0.5 mm pitch) Header Number of pins (2 digits) Mated height 3: For mated height 1.2 mm 3: For mated height 1.2 mm Functions 3: With positioning bosses 4: Without positioning bosses Surface treatment (Contact portion / Terminal portion) 7: Ni plating on base, Au plating on surface (for Ni barrier available) Packing G: 3,000 pieces embossed tape and plastic reel x 2 (for Ni barrier available) ds_65307_en_p5kl: 311012J 1 AXK(5/6)L Discontinued as of September 30, 2013 PRODUCT TYPES Part No. Mated height 1.2 mm Packing quantity No. of pins Socket Header 10 12 20 24 30 34 40 46 50 60 AXK5L10347G AXK5L12347G AXK5L20347G AXK5L24347G AXK5L30347G AXK5L34347G AXK5L40347G AXK5L46347G AXK5L50347G AXK5L60347G AXK6L10347G AXK6L12347G AXK6L20347G AXK6L24347G AXK6L30347G AXK6L34347G AXK6L40347G AXK6L46347G AXK6L50347G AXK6L60347G Inner carton (1-reel) Outer carton 3,000 pieces 6,000 pieces Notes: 1. Regarding ordering units: During production, Please make orders in 1-reel units. Samples for mounting confirmation: Please consult us. Samples: Small lot orders are possible. Please consult us. 2. The standard type comes without positioning bosses. Connectors with positioning bosses are available for on-demand production. For this type of connector, 9th digit of the part no. changes from 4 to 3. e.g. 10 pin contacts for sockets: AXK5L10337G SPECIFICATIONS 1. Characteristics Electrical characteristics Item Rated current Rated voltage Breakdown voltage Specifications 0.5A/pin contact (Max. 10 A at total pin contacts) 60V AC/DC 150V AC for 1 minute Detection current: 1mA Min. 1,000M (initial) Using 500V DC megger Insulation resistance Contact resistance Mechanical characteristics Max. 90m Composite insertion force Composite removal force Holding force of terminal securing section Ambient temperature Soldering heat resistance Storage temperature Conditions Based on the contact resistance measurement method specified by JIS C 5402. Max. 0.981N {100gf}/pin contacts  pin contacts (initial) Min. 0.0588N {6gf}/pin contacts  pin contacts Min. 0.981N {100gf}/pin contact –55C to +85C Max. peak temperature of 260C (on the surface of the PC board around the connector terminals) 300C within 5 seconds 350C within 3 seconds –55C to +85C (product only) –40C to +50C (emboss packing) Measuring the maximum force. As the contact is axially pull out. No freezing at low temperatures Infrared reflow soldering Soldering iron No freezing at low temperatures. No dew condensation. Conformed to MIL-STD-202F, method 107G Environmental characteristics Lifetime characteristics Unit weight Thermal shock resistance (header and socket mated) 5 cycles, insulation resistance min. 100M, contact resistance max. 90m Humidity resistance (header and socket mated) Saltwater spray resistance (header and socket mated) H2S resistance (header and socket mated) 120 hours, insulation resistance min. 100M, contact resistance max. 90m 24 hours, insulation resistance min. 100M, contact resistance max. 90m Insertion and removal life 50 times 48 hours, contact resistance max. 90m Order Temperature (°C) 1 –55 −30 2 3 85 +30 4 –55 −30 Time (minutes) 30 Max. 5 30 Max. 5 Bath temperature 402C, humidity 90 to 95% R.H. Bath temperature 352C, saltwarter concentration 51% Bath temperature 402C, gas concentration 31 ppm, humidity 75 to 80% R.H. Repeated insertion and removal speed of max. 200 times/hours 20 pin contacts; Socket: 0.05g; Header: 0.02g 2. Material and surface treatment 2 Part name Molded portion Material Heat-resistant resin (UL94V-0) Contact/Post Copper alloy Surface treatment — Contact portion: Ni plating on base, Au plating on surface Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal) The section close to the soldering portion has a nickel barrier. (The nickel base is exposed.) ds_65307_en_p5kl: 311012J AXK(5/6)L Discontinued as of September 30, 2013 DIMENSIONS Interested in CAD data? You can obtain CAD data for all products with a CAD Data mark from your local Panasonic Electric Works representative. (Unit: mm) • Socket (Mated height: 1.2mm) A (Suction face) 1.60 B±0.1 0.20±0.03 0.10 (0.80) 0.50±0.05 Terminal coplanarity 1.20 5.80 4.20 4.80 Dimension table (mm) 1.15 (0.80) 0.10±0.03 No. of contacts 10 12 20 24 30 34 40 46 50 60 A 5.50 6.00 8.00 9.00 10.50 11.50 13.00 14.50 15.50 18.00 B 2.00 2.50 4.50 5.50 7.00 8.00 9.50 11.00 12.00 14.50 General tolerance: 0.2 0.90 0.10±0.03 Dimension table (mm) 3.30 2.00 2.50 0.20±0.03 Terminal coplanarity 0.10 (0.65) 0.50±0.05 0.95 (0.65) A B±0.1 (Suction face) 1.20 • Header (Mated height: 1.2mm) No. of contacts 10 12 20 24 30 34 40 46 50 60 A 3.90 4.40 6.40 7.40 8.90 9.90 11.40 12.90 13.90 16.40 B 2.00 2.50 4.50 5.50 7.00 8.00 9.50 11.00 12.00 14.50 General tolerance: 0.2 • Socket and header are mated 1.20±0.15 Header Socket ds_65307_en_p5kl: 311012J 3 AXK(5/6)L Discontinued as of September 30, 2013 EMBOSSED TAPE DIMENSIONS (unit: mm, Common for respective contact type, socket and header) • Tape dimensions (Conforming to JIS C 0806-1990. However, some tapes have mounting hole pitches that do not comply with the standard.) Tape I Tape II Taping reel D±1 A±0.3 A±0.3 B 1.75 C Pull out direction 4 2 8.0 Top cover tape 1.75 380 dia. C Pull out direction • Plastic reel dimensions (Conforming to EIAJ ET-7200B) 4 2 Embossed carrier tape Embossed mounting-hole 8.0 1.5+0.1 0 dia. 1.5+0.1 0 dia. Dimension table (mm) Suffix: G (1 reel, 3,000 pieces embossed tape: Plastic reel package) Mated height No. of pins Type of taping A B C D Quantity per reel Socket and header are common: 1.2mm 10 to 18 20 to 50 60 Tape I Tape I Tape II 16.0 24.0 32.0 — — 28.4 7.5 11.5 14.2 17.4 25.4 33.4 3,000 pcs. 3,000 pcs. 3,000 pcs. Connector orientation with respect to direction of progress of embossed tape Type Common for P5KL Direction of tape progress Socket Header Note: There is no indication on this product regarding top-bottom or left-right orientation. 4 ds_65307_en_p5kl: 311012J AXK(5/6)L Discontinued as of September 30, 2013 NOTES • Socket • Header Recommended PC board pattern (TOP VIEW) 0.50±0.05 0.25±0.03 Recommended PC board pattern (TOP VIEW) 0.40±0.05 0.125±0.03 2.40±0.05 4.30±0.05 C 6.80±0.05 0.50±0.05 0.25±0.03 4.00±0.05 3.20±0.05 2.20±0.05 1. As shown below, excess force during insertion may result in damage to the connector or removal of the solder. Also, to prevent connector damage plese confirm the correct position before mating connectors. B±0.05 2. Keep the PC board warp no more than 0.03 mm in relation to the overall length of the connector. 0.40±0.05 0.125±0.03 B±0.05 : Insulation area Recommended metal mask pattern Metal mask thickness: 150 m (Terminal portion opening area ratio: 57%) Recommended metal mask pattern Metal mask thickness: 150 m (Terminal portion opening area ratio: 56%) 0.50±0.01 0.23±0.01 0.50±0.01 0.23±0.01 0.35±0.01 0.115±0.01 Recommended metal mask pattern Metal mask thickness: 120 m (Terminal portion opening area ratio: 70%) Recommended metal mask pattern Metal mask thickness: 120 m (Terminal portion opening area ratio: 70%) 0.23±0.01 4.10±0.01 (0.72) 0.115±0.01 2.66±0.01 (1.07) 0.115±0.01 (0.72) 6.60±0.01 0.50±0.01 0.23±0.01 4.46±0.01 0.50±0.01 0.35±0.01 0.35±0.01 (0.58) (0.58) 2.94±0.01 4.10±0.01 0.35±0.01 0.115±0.01 (1.07) 3. Recommended PC board and metal mask patterns Connectors are mounted with high pitch density, intervals of 0.35 mm, 0.4 mm or 0.5 mm. In order to reduce solder bridges and other issues make sure the proper levels of solder is used. The figures to the right are recommended metal mask patterns. Please use them as a reference. (0.86) 4.88±0.01 6.60±0.01 Max. 0.03mm (0.86) Max. 0.03mm Notes: 1. See the dimension table on page 3 for more information on the B dimension of the socket and header. 2. The socket C dimension is the B dimension in the dimensions table with 0.8 added. For Cautions for Use, see Connector Technical Information. For other details, please verify with the product specification sheets. ds_65307_en_p5kl: 311012J 5