AXK7L10223G

AXK7L, 8L For board-to-FPC F4 Series Narrow pitch connectors (0.4mm pitch) 3. Improved mating strength between the socket and header The simple locking structures provided for the soldering terminals and the contact points improve the mating strength and provide tactile feedback when locked. m 1m 4. m 0m 5. Socket Socket Header 5. Connectors for inspection available Connectors for inspection are available that are ideal for modular unit inspection and inspection in device assembly processes. APPLICATIONS Compact portable devices “Cellular phones, DVD, DSC, etc” Header Example of connection between a board and an FPC Before mating Compliance with RoHS Directive FPC Locking structure of the soldering terminals FEATURES 1. The lowest profile class among twopiece connectors in the world (Mated height: 0.9mm) Achieved both a 0.4 mm pitch and an ultra low profile of 0.9 mm high when mated, contributing to further thickness reduction of products. 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability. (See Page 6 for details of the structure) 4. Easy to design product circuits 1) An insulating wall provided for the bottom surface of the connector prevents contact between the pattern on the PC board and the metal pins, enabling pattern wiring under the connector, and thus contributing to the reduction in size of PC boards. F4 connector Reinforcing plate PCB After mating 0.9mm Pattern wiring under the connector is possible. ORDERING INFORMATION AXK G AXK: Narrow Pitch Connector Series Series name; 7L: F4 (0.4 mm pitch) Socket 8L: F4 (0.4 mm pitch) Header Number of contacts (2 digits) Mated height 2: For mated height 0.9 mm 1: For mated height 0.9 mm Functions 2: Without positioning bosses Surface treatment (Contact portion / Terminal portion) 3: Ni plating on base, Au plating on surface (for Ni barrier available) 4: Ni plating on base, Au plating on surface Other specifications B: Soldering terminals with fork type terminal Note 1 Packing G: 3,000 pieces embossed tape and plastic reel × 2 Notes: 1. “B” in the 11th digit of the header part number signifies a fork type soldering terminals to lessen the constraint on amount of solder when mounting, and a construction that makes it difficult when mounting for excess solder to interfere with the socket. Although compatible with the previous parts, these parts are not compatible with the recommended PC board pattern and recommended metal mask pattern. panasonic-electric-works.net/ac AXK7L, 8L PRODUCT TYPES Part number Mated height Number of contacts 0.9 mm 10 12 14 16 20 22 24 26 28 30 32 34 36 38 40 44 48 50 54 60 66 70 80 Packing Socket Header Inner carton (1 reel) AXK7L10223G AXK7L12223G AXK7L14223G AXK7L16223G AXK7L20223G AXK7L22223G AXK7L24223G AXK7L26223G AXK7L28223G AXK7L30223G AXK7L32223G AXK7L34223G AXK7L36223G AXK7L38223G AXK7L40223G AXK7L44223G AXK7L48223G AXK7L50223G AXK7L54223G AXK7L60223G AXK7L66223G AXK7L70223G AXK7L80223G AXK8L10124BG AXK8L12124BG AXK8L14124BG AXK8L16124BG AXK8L20124BG AXK8L22124BG AXK8L24124BG AXK8L26124BG AXK8L28124BG AXK8L30124BG AXK8L32124BG AXK8L34124BG AXK8L36124BG AXK8L38124BG AXK8L40124BG AXK8L44124BG AXK8L48124BG AXK8L50124BG AXK8L54124BG AXK8L60124BG AXK8L66124BG AXK8L70124BG AXK8L80124BG 3,000 pieces Outer carton 6,000 pieces (2 reels) Notes: 1. Regarding ordering units; During production: Please make orders in 1-reel units. Samples for mounting confirmation: Available in units of 50 pieces. Please contact us. Samples: Available. Please contact us. 2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our sales office. 3. Please contact us regarding different number of contacts. 4. “B” in the 11th digit of the header part number signifies a fork type soldering terminals to lessen the constraint on amount of solder when mounting, and a construction that makes it difficult when mounting for excess solder to interfere with the socket. Although compatible with the previous parts, these parts are not compatible with the recommended PC board pattern and recommended metal mask pattern. SPECIFICATIONS 1. Characteristics Electrical characteristics Item Rated current Rated voltage Specifications 0.3A/terminal (Max. 5 A at total terminals) 60V AC/DC Breakdown voltage 150V AC for 1 min. Insulation resistance Min. 1,000MΩ (Initial) Contact resistance Max. 90mΩ Ambient temperature Soldering heat resistance Storage temperature Environmental characteristics Thermal shock resistance (header and socket mated) Lifetime characteristics Unit weight Based on the contact resistance measurement method specified by JIS C 5402. No freezing at low temperatures –55°C to +85°C 5 cycles, insulation resistance min. 100MΩ, contact resistance max. 90mΩ H2S resistance (header and socket mated) Insertion and removal life 50 times Saltwater spray resistance (header and socket mated) Rated voltage is applied for one minute and check for short circuit or damage with a detection current of 1mA Using 250V DC megger (applied for 1 min.) Max. peak temperature of 260°C (on the surface of the PC board around the connector terminals) 300°C within 5 sec, 350°C within 3 sec. –55°C to +85°C (Product only) –40°C to +50°C (Emboss packing) 120 hours, insulation resistance min. 100MΩ, contact resistance max. 90mΩ 24 hours, insulation resistance min. 100MΩ, contact resistance max. 90mΩ 48 hours, contact resistance max. 90mΩ Humidity resistance (header and socket mated) Conditions — — 20 contacts; Socket: 0.03g Header: 0.01g Infrared reflow soldering Soldering iron No freezing at low temperatures Sequence 1. –55 –30 °C, 30 min. 2. ~ , Max. 5 min. 3. 85 +30 °C, 30 min. 4. ~ , Max. 5 min. Temperature 40±2°C, humidity 90 to 95% R.H. Temperature 35±2°C, saltwater concentration 5±1% Temperature 40±2°C, gas concentration 3±1 ppm, humidity 75 to 80% R.H. Repeated insertion and removal speed of max. 200 times/hours — panasonic-electric-works.net/ac AXK7L, 8L 2. Material and surface treatment Part name Molded portion Material LCP resin (UL94V-0) Contact/Post Copper alloy DIMENSIONS (unit: mm) Surface treatment — Contact portion: Ni plating on base, Au plating on surface Terminal portion: Ni plating on base, Au plating on surface (Except for front edge of terminal) However, the area adjacent to the socket terminal is exposed to Ni on base. Soldering terminals: Socket: Ni plating on base, Pd + Au flash plating on surface (Expect for front edge of terminal) Header: Ni plating on base, Au plating on surface (Expect for front edge of terminal) The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac • Socket (Mated height 0.9 mm) Dimension table (mm) CAD Data Terminal coplanarity 0.08 (Contact and soldering terminals) 0.87 F 4.40 Soldering terminals 0.10±0.03 F-F cross section 0.50 (5.00) 0.40±0.05 C±0.15 Suction face 0.80 5.00 F 0.60 Soldering terminals This surface C0.15 5.00 A B±0.1 0.40±0.05 0.15±0.03 General tolerance: ±0.2 Number of contacts/ Dimensions 10 A B C 4.4 1.6 3.0 12 14 16 20 22 24 26 28 30 32 34 36 38 40 44 48 50 54 60 66 70 80 4.8 5.2 5.6 6.4 6.8 7.2 7.6 8.0 8.4 8.8 9.2 9.6 10.0 10.4 11.2 12.0 12.4 13.2 14.4 15.6 16.4 18.4 2.0 2.4 2.8 3.6 4.0 4.4 4.8 5.2 5.6 6.0 6.4 6.8 7.2 7.6 8.4 9.2 9.6 10.4 11.6 12.8 13.6 15.6 3.4 3.8 4.2 5.0 5.4 5.8 6.2 6.6 7.0 7.4 7.8 8.2 8.6 9.0 9.8 10.6 11.0 11.8 13.0 14.2 15.0 17.0 • Header (Mated height: 0.9 mm) Dimension table (mm) CAD Data Terminal coplanarity 0.63 0.80±0.05 1.20±0.05 Suction face 2.30 5 0.65 4.10 5 .1 R0 Soldering terminals 0.08±0.03 R0 .1 0.08 (Contact and soldering terminals) 3.36 A B C±0.1 0.40±0.05 0.15±0.03 0.27 Soldering terminals General tolerance: ±0.2 Number of contacts/ Dimensions 10 A B C 4.0 3.74 1.6 12 14 16 20 22 24 26 28 30 32 34 36 38 40 44 48 50 54 60 66 70 80 4.4 4.8 5.2 6.0 6.4 6.8 7.2 7.6 8.0 8.4 8.8 9.2 9.6 10.0 10.8 11.6 12.0 12.8 14.0 15.2 16.0 18.0 4.14 4.54 4.94 5.74 6.14 6.54 6.94 7.34 7.74 8.14 8.54 8.94 9.34 9.74 10.54 11.34 11.74 12.54 13.74 14.94 15.74 17.74 2.0 2.4 2.8 3.6 4.0 4.4 4.8 5.2 5.6 6.0 6.4 6.8 7.2 7.6 8.4 9.2 9.6 10.4 11.6 12.8 13.6 15.6 panasonic-electric-works.net/ac AXK7L, 8L Socket Header 0.90±0.15 • Socket and header are mated EMBOSSED TAPE DIMENSIONS (unit: mm) (Common for respective contact type, socket and header) Tape dimensions (Conforming to JIS C 0806-1990. However, some tapes have mounting hole pitches that do not comply with the standard.) Tape I Tape II A±0.3 Plastic reel dimensions (Conforming to EIAJ ET–7200B) A±0.3 C C 8.0 Top cover tape 4 2 Pull out direction 4 2 1.75 380 dia. 1.75 Pull out direction Taping reel D±1 B Embossed carrier tape Embossed mounting-hole 8.0 1.5+0.1 0 dia. 1.5+0.1 0 dia. TABLE OF DIMENSIONS Mated height Number of contacts Type of taping A B C D Quantity per reel Common for socket and header: 0.9mm Max. 24 26 to 70 80 Tape I Tape I Tape II 16.0 24.0 32.0 — — 28.4 7.5 11.5 14.2 17.4 25.4 33.4 3000 3000 3000 Connector orientation with respect to direction of progress of embossed tape Type Common for F4 Direction of tape progress Socket Header Note: There is no indication on this product regarding top-bottom or left-right orientation. panasonic-electric-works.net/ac AXK7L, 8L For board-to-FPC F4 Series Connectors for inspection usage (0.4mm pitch) m 1m 4. m 0m 5. Socket Header Compliance with RoHS Directive FEATURES APPLICATIONS 1. 3,000 insertion and removals (when as recommended) 2. Same external dimensions and foot pattern as standard type. 3. Improved mating Insertion and removal have become easier due to a reduction in the mating retention force required by the simple locking structure and also in the amount of force needed for insertion and removal. (We cannot warrant anything regarding mating retention.) Ideal for module unit inspection and equipment assembly inspection TABLE OF PRODUCT TYPES ✩: Available for sale Product name F4 for inspection 10 ✩ 12 ✩ 14 ✩ 16 ✩ 20 ✩ 22 ✩ 24 ✩ 26 ✩ 28 ✩ 30 ✩ Number of contacts 32 34 36 38 ✩ ✩ ✩ ✩ 40 ✩ 44 ✩ 48 ✩ 50 ✩ 54 ✩ 60 ✩ 66 ✩ 70 ✩ 80 ✩ Notes: 1. Please inquire about numbers of contacts other than those given above. 2. Please inquire with us regarding delivery times. 3. Please keep the minimum unit for ordering no less than 50 pieces per lot. 4. Please inquire for further information. PRODUCT TYPES Socket Specifications Without positioning bosses Part No. AXK7LE∗∗26G Header Specifications Without positioning bosses Part No. AXK8LE∗∗26BG Notes: 1. When placing an order, substitute the “∗” (asterisk) in the above part number with the number of contacts for the required connector. 2. The above part numbers are for connectors without positioning bosses, which are standard. When ordering connectors with positioning bosses, please contact our sales office. panasonic-electric-works.net/ac AXK7L, 8L NOTES Socket Header Recommended PC board pattern (Mount pad arrangement pattern) 1.40±0.03 Recommended PC board pattern (Mount pad arrangement pattern) 1.40±0.03 0.40±0.03 0.23±0.03 0.57±0.03 0.40±0.03 1.40±0.03 3.20±0.03 4.70±0.03 Max. 2.20 4.00±0.03 5.60±0.03 C 0. 40 0.40±0.03 0.23±0.03 3.60±0.03 1. Removal by pulling up from an end causes the entire connector removal force to concentrate on the soldering terminals and end terminals. Therefore, please lift and remove from the side. Doing so will also prevent cracking of the soldered parts. : Insulation area 1.00±0.03 Relation between connector and mounting pad (Max. 2.20) (3.20±0.03) (4.70±0.03) NG Metal mask thickness: Here, 150 µm (Terminal portion opening area ratio: 52 %) (Metal portion opening area ratio: 80 %) 3.60±0.01 4.50±0.01 0.40±0.01 1.40±0.01 (0.49) 4.42±0.01 5.40±0.01 5.60±0.01 3.60±0.01 40 (1.00) 0.20±0.01 0.40±0.01 0. 0.20±0.01 0.40±0.01 C Recommended metal mask pattern Metal mask thickness: Here, 120 µm (Terminal portion opening area ratio: 66 %) (Metal portion opening area ratio: 100 %) Metal mask thickness: Here, 120 µm (Terminal portion opening area ratio: 66 %) (Metal portion opening area ratio: 100 %) 1.40±0.01 4.18±0.01 5.40±0.01 0.40±0.01 0.20±0.01 0.40±0.01 40 (1.00) 0. 0.20±0.01 0.40±0.01 4.50±0.01 1.40±0.01 0.57±0.01 5.60±0.01 3.60±0.01 1.40±0.01 1.00±0.01 (0.57) 3.36±0.01 Recommended metal mask pattern C In particular, if a lot of solder is used in the header retaining soldering terminals, it might interfere with and cause incomplete socket mating. Therefore, please follow the recommended conditions give on the right. 1.40±0.01 0.46±0.01 (0.45) Recommended metal mask pattern Metal mask thickness: Here, 150 µm (Terminal portion opening area ratio: 53 %) (Metal portion opening area ratio: 100 %) 1.40±0.01 1.00±0.01 2. PC Boards and Recommended Metal Mask Patterns Connectors are mounted with high density, with a pitch interval of 0.4 to 0.5 mm. In order to reduce solder bridge and other issues make sure the proper levels of solder are used. The figures to the right are recommended metal mask patterns. Please use them as a reference. : Insulation area Recommended metal mask pattern (0.61) Pull Mounting pad For other details, please verify with the product specification sheets. panasonic-electric-works.net/ac NOTES FOR USING SMD TYPE CONNECTORS (Common) NOTES FOR USING SMD TYPE CONNECTORS (Common) Regarding the design of devices and PC board patterns 1) When connecting several connectors together by stacking, make sure to maintain proper accuracy in the design of structure and mounting equipment so that the connectors are not subjected to twisting and torsional forces. 2) With mounting equipment, there may be up to a ±0.2 to 0.3-mm error in positioning. Be sure to design PC boards and patterns while taking into consideration the performance and abilities of the required equipment. 3) Some connectors have tabs embossed on the body to aid in positioning. When using these connectors, make sure that the PC board is designed with positioning holes to match these tabs. 4) To ensure the required mechanical strength when soldering the connector terminals, make sure the PC board meets recommended PC board pattern design dimensions given. 5) For all connectors of the narrow-pitch series, to prevent the PC board from coming off during vibrations or impacts, and to prevent loads from falling directly on the soldered portions, be sure to design some means to fix the PC board in place. Example) Secure in place with screws Screw Spacer Connector PC board Spacer When connecting PC boards, take appropriate measures to prevent the connector from coming off. 6) Notes when using a FPC. (1) When the connector is soldered to an FPC board, during its insertion and removal procedures, forces may be applied to the terminals and cause the soldering to come off. It is recommended to use a reinforcement board on the backside of the FPC board to which the connector is being connected. Please make the reinforcement board dimensions bigger than the outer limits of the recommended PC board pattern (should be approximately 1 mm greater than the outer limit). Material should be glass epoxy or polyimide, and the thickness should be between 0.2 and 0.3 mm. (2) Collisions, impacts, or turning of FPC boards, may apply forces on the connector and cause it to come loose. Therefore, make to design retaining plates or screws that will fix the connector in place. 7) The narrow-pitch connector series is designed to be compact and thin. Although ease of handling has been taken into account, take care when mating the connectors, as displacement or angled mating could damage or deform the connector. Regarding the selection of the connector placement machine and the mounting procedures 1) Select the placement machine taking into consideration the connector height, required positioning accuracy, and packaging conditions. 2) Be aware that if the catching force of the placement machine is too great, it may deform the shape of the connector body or connector terminals. 3) Be aware that during mounting, external forces may be applied to the connector contact surfaces and terminals and cause deformations. 4) Depending on the size of the connector being used, self alignment may not be possible. In such cases, be sure to carefully position the terminal with the PC board pattern. 5) The positioning bosses give an approximate alignment for positioning on the PC board. For accurate positioning of the connector when mounting it to the PC board, we recommend using an automatic positioning machine. panasonic-electric-works.net/ac NOTES FOR USING SMD TYPE CONNECTORS (Common) For products other than the ones above, please refer to the latest product specifications. 6) The temperatures are measured at the surface of the PC board near the connector terminals. (The setting for the sensor will differ depending on the sensor used, so be sure to carefully read the instructions that comes with it.) 7) The temperature profiles given in this catalog are values measured when using the connector on a resin-based PC board. When performed reflow soldering on a metal board (iron, aluminum, etc.) or a metal table to mount on a FPC, make sure there is no deformation or discoloration of the connector beforehand and then begin mounting. 2. Hand soldering 1) Set the soldering iron so that the tip temperature is less than that given in the table below. Table A Product name Soldering iron temperature SMD type connectors 300°C within 5 sec. 350°C within 3 sec. Apply the solder wire here Upper limited (Solder heat resistance) Lower limited (Solder wettability) ld iro erin n g 2) Do not allow flux to spread onto the connector leads or PC board. This may lead to flux rising up to the connector inside. 3) Touch the soldering iron to the foot pattern. After the foot pattern and connector terminal are heated, apply the solder wire so it melts at the end of the connector terminals. So 1. Reflow soldering 1) Measure the recommended profile temperature for reflow soldering by placing a sensor on the PC board near the connector surface or terminals. (The setting for the sensor will differ depending on the sensor used, so be sure to carefully read the instructions that comes with it.) 2) As for cream solder printing, screen printing is recommended. 3) See the specifications and drawings for the product in question for the metal mask pattern diagrams. 4) When mounting on both sides of the PC board and the connector is mounting on the underside, use adhesives or other means to ensure the connector is properly fixed to the PC board. (Double reflow soldering on the same side is possible.) 5) N2 reflow, conducting reflow soldering in a nitrogen atmosphere, increases the solder flow too greatly, enabling wicking to occur. Make sure that the solder feed rate and temperature profile are appropriate. Soldering conditions Please use the reflow temperature profile conditions recommended below for reflow soldering. Please contact us before using a temperature profile other than that described below (e.g. lead-free solder). • Narrow-pitch connectors (except P5 floating and P8 type) Temperature Peak temperature 260°C 230°C 180°C 150°C Peak temperature Terminal Small angle as possible up to 45 degrees 220°C 200°C Preheating 25 sec. 60 to 120 sec. PC board 70 sec. Time Pattern 4) Be aware that soldering while applying a load on the connector terminals may cause improper operation of the connector. 5) Thoroughly clean the soldering iron. 6) Flux from the solder wire may get on the contact surfaces during soldering operations. After soldering, carefully check the contact surfaces and clean off any solder before use. 7) For soldering of prototype devices during product development, you can perform soldering at the necessary locations by heating with a hot-air gun by applying cream solder to the foot pattern beforehand. However, at this time, make sure that the air pressure does not move connectors by carefully holding them down with tweezers or other similar tool. Also, be careful not to go too close to the connectors and melt any of the molded components. 8) When soldering the shell terminals of, for example, I/O connectors, avoid applying an excessive amount of solder, or it may flow into the shell. Example: Inflidge Industrial, Ltd. Super Air Heater Digital temperature controller Air heater with internal temperature sensor 3. Solder reworking 1) Finish reworking in one operation. 2) For reworking of the solder bridge, use a soldering iron with a flat tip. To prevent flux from climbing up to the contact surfaces, do not add more flux. 3) Keep the soldering iron tip temperature below the temperature given in Table A. 4) When soldering the shell terminals of, for example, I/O connectors, avoid applying an excessive amount of solder, or it may flow into the shell. • Narrow-pitch connector (P5 floating, P8) Temperature 245°C max. Peak temperature 200°C 155 to 165°C Preheating 60 to 120 sec. Within 30 sec. Time panasonic-electric-works.net/ac Information Regarding soldering NOTES FOR USING SMD TYPE CONNECTORS (Common) Handling Single Components 1) Make sure not to drop or allow parts to fall from work bench 2) Excessive force applied to the terminals could cause them to warp, come out, or weaken the adhesive strength of the solder. Handle with care. 3) Repeated bending of the terminals may break them. 4) Do not use alcohol for cleaning. Doing so may whiten the surface of molded parts. Cleaning flux from PC board Handling the PC board 1) To increase the cleanliness of the cleaning fluid and cleaning operations, prepare equipment for a cleaning process that begins with boil cleaning, ultrasonic cleaning, and then to vapor cleaning. 2) Carefully oversee the cleanliness of the cleaning fluids to make sure that the contact surfaces do not become dirty from the cleaning fluid itself. 3) Since some powerful cleaning may dissolve molded components of the connector and wipe off printed letters, we recommend aqua pura electronic parts cleaners. Consult us if you wish other types of cleaning fluids. 4) Please note that the surfaces of molded parts may whiten when cleaned with alcohol. • Handling the PC board after mounting the connector When cutting or bending the PC board after mounting the connector, be careful that the soldered sections are subjected to excessive forces. different times, and some connectors more even change color slightly if subjected to ultraviolet rays during storage. This is normal and will not affect the operation of the connector. 3) When storing the connectors with the PC boards assembled and components alreeady set, be careful not to stack them up so the connectors are subjected to excessive forces. 4) Avoid storing the connectors in locations with excessive dust. The dust may accumulate and cause improper connections at the contact surfaces. 3) Before soldering, try not to insert or remove the connector more than absolutely necessary. 4) When coating the PC board after soldering the connector to prevent the deterioration of insulation, perform the coating in such a way so that the coating does not get on the connector. 5) There may be variations in the colors of products from different production lots. This is normal. 6) The connectors are not meant to be used for switching. 7) Be sure not to allow external pressure to act on connectors when assembling PCBs or moving in block assemblies. Do not the soldered areas to be subjected to forces Storage of connectors 1) To prevent trouble from voids or air pockets by heat of reflow soldering, avoid storing the connectors in areas of high humidity. When storing the connectors for more than six months, be sure to store them in a storage area where the humidity is properly controlled. 2) Depending on the connector type, the color of the connector may vary from connector to connector if produced at Other Notes 1) These products are made for the design of compact and lightweight devices and therefore the thickness of the molded components has been made very thin. Therefore, be careful during insertion and removal operations for excessive forces applied may damage the products. 2) Dropping of the products or rugged mishandling may bend or damage the terminals and even hinder proper reflow soldering. Regarding sample orders to confirm proper mounting When ordering samples to confirm proper mounting with the placement machine, connectors are delivered in 50piece units in the condition given right. Consult a sale representative for ordering sample units. For other details, please verify with the product specification sheets. Condition when delivered from factory Reel Embossed tape amount required for the mounting Required number of products for sample production (Delivery can also be made on a reel by customer request.) (Unit 50 pcs.) panasonic-electric-works.net/ac