AXN430C430S

Automation Controls Catalog For board-to-board Narrow pitch connectors (0.8mm pitch) P8 Series FEATURES m m 83 6. m m 88 5. Socket Header RoHS compliant 1. The product lineup includes low profile heights of 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, 5.5 mm, 6.0 mm, 7.0 mm, 8.0 mm, 13.0 mm and 14.0 mm. 2. Ideal for portable devices, the bellows-type contacts provide a strong resistance against falling, impacts, and forced insertions and removals. 5. Automatic mounting 1) Automatic mounting machine is available with an exclusive mounting nozzle. Using the following types of suction nozzles make the connectors compatible with automatic mounting without the need for suction tape. Bellows-type contacts Bellows-type contacts resist mating stress and offer high contact reliability. Ex.: Stacking height of 3.0 mm The bellows type contacts are fabricated by bending thin sheet metal. They offer a reliable contact since a rounded corner, instead of a sharp edge, is used for tuning fork type contact. Suction tape and covers are also available for compatibility with other types of mounting machines. Round corner makes contact. 3. Porosity treatment for improved resistance against corrosion. 4. Simple lock mechanism Lock mechanism ensures proper contact and provides resistance against vibrations and shocks. Suction tape (socket) 2) Positioning bosses (without bosses also available) Simple locking mechanism Bosses for positioning on the PC board (those without bosses are also available). Suitable for both manual and automatic mounting. APPLICATIONS Digital devices, such as desktop PC, laptop and digital video cameras 2013.11 industrial.panasonic.com/ac/e/ –1– © Panasonic Corporation 2013 ACCTB25E 201310-T Narrow pitch connectors P8 (0.8mm pitch) ORDERING INFORMATION AXN 3: Narrow Pitch Connector P8 (0.8 mm pitch) Socket 4: Narrow Pitch Connector P8 (0.8 mm pitch) Header Number of pins (2 digits) Suction tape and cover Nil: Socket; without suction tape, Header; without suction cover C: Socket; with suction tape, Header; with suction cover Mated height 0: For mated height 3.0 mm, 4.0 mm and 5.0 mm 1: For mated height 6.0 mm, 7.0 mm, 8.0 mm, 13.0 mm and 14.0 mm 2: For mated height 3.5 mm, 4.5 mm and 5.5 mm 0: For mated height 13.0 mm 1: For mated height 14.0 mm 3: For mated height 3.0 mm, 3.5 mm and 6.0 mm 4: For mated height 4.0 mm, 4.5 mm and 7.0 mm 5: For mated height 5.0 mm, 5.5 mm and 8.0 mm Functions 3: With positioning bosses (Except for mated height 13.0 mm header, embossed tape packing) 4: Without positioning bosses (Mated height 13.0 mm header, embossed tape packing and mated height 14.0 mm header only) Surface treatment (Contact portion / Terminal portion) 0: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface (Applies to mated heights of 6.0 to 14.0 mm.) 8: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface (Applies to mated heights of 3.0 to 5.5 mm.) 0: Ni plating on base, Au plating on surface / Ni plating on base, Au plating on surface Packing J: 1,500 pieces embossed tape and paper reel × 2 P: 1,000 pieces embossed tape and paper reel × 2 S: Tube package Notes: 1. The tape width for 100-pin embossed tape packaging is non-JIS standard. Please inquire. 2. The depth of the embossed tape for headers with 13 mm and 14 mm mated heights is non-JIS standard. Please test with your mounter before using. 3. Models possible for “J” packaging are as follows: Socket mated heights: 3.0 mm, 3.5 mm, 4.0 mm, 4.5 mm, 5.0 mm, and 5.5 mm Headers: Mated heights 3.0 mm, 3.5 mm, and 6.0 mm Panasonic Corporation Automation Controls Buisiness Division industrial.panasonic.com/ac/e/ –2– © Panasonic Corporation 2013 ACCTB25E 201310-T Narrow pitch connectors P8 (0.8mm pitch) PRODUCT TYPES Stick package Mated height 3.0 mm 3.5 mm 4.0 mm 4.5 mm 5.0 mm 5.5 mm 6.0 mm 7.0 mm No. of pins 16 20 24 26 30 40 50 60 80 100 16 24 26 30 60 16 20 26 30 40 50 60 80 100 16 26 30 60 14 20 24 26 30 40 50 60 80 100 24 26 30 60 20 24 26 30 40 50 60 64 80 100 20 22 26 30 40 50 60 80 100 Part No. Socket Header AXN316038S AXN320038S AXN324038S AXN326038S AXN330038S AXN340038S AXN350038S AXN360038S AXN380038S AXN300038S AXN316238S AXN324238S AXN326238S AXN330238S AXN360238S AXN316038S AXN320038S AXN326038S AXN330038S AXN340038S AXN350038S AXN360038S AXN380038S AXN300038S AXN316238S AXN326238S AXN330238S AXN360238S AXN314038S AXN320038S AXN324038S AXN326038S AXN330038S AXN340038S AXN350038S AXN360038S AXN380038S AXN300038S AXN324238S AXN326238S AXN330238S AXN360238S AXN320130S AXN324130S AXN326130S AXN330130S AXN340130S AXN350130S AXN360130S AXN364130S AXN380130S AXN300130S AXN320130S AXN322130S AXN326130S AXN330130S AXN340130S AXN350130S AXN360130S AXN380130S AXN300130S AXN416330S AXN420330S AXN424330S AXN426330S AXN430330S AXN440330S AXN450330S AXN460330S AXN480330S AXN400330S AXN416330S AXN424330S AXN426330S AXN430330S AXN460330S AXN416430S AXN420430S AXN426430S AXN430430S AXN440430S AXN450430S AXN460430S AXN480430S AXN400430S AXN416430S AXN426430S AXN430430S AXN460430S AXN414530S AXN420530S AXN424530S AXN426530S AXN430530S AXN440530S AXN450530S AXN460530S AXN480530S AXN400530S AXN424530S AXN426530S AXN430530S AXN460530S AXN420330S AXN424330S AXN426330S AXN430330S AXN440330S AXN450330S AXN460330S AXN464330S AXN480330S AXN400330S AXN420430S AXN422430S AXN426430S AXN430430S AXN440430S AXN450430S AXN460430S AXN480430S AXN400430S Packing quantity Outer Stick carton 50 pcs. 300 pcs. 50 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 25 pcs. 300 pcs. 20 pcs. 300 pcs. 15 pcs. 300 pcs. 12 pcs. 300 pcs. 12 pcs. 300 pcs. 50 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 15 pcs. 300 pcs. 50 pcs. 300 pcs. 50 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 25 pcs. 300 pcs. 20 pcs. 300 pcs. 15 pcs. 300 pcs. 12 pcs. 300 pcs. 12 pcs. 300 pcs. 50 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 15 pcs. 300 pcs. 50 pcs. 300 pcs. 50 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 25 pcs. 300 pcs. 20 pcs. 300 pcs. 15 pcs. 300 pcs. 12 pcs. 300 pcs. 12 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 15 pcs. 300 pcs. 50 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 25 pcs. 300 pcs. 20 pcs. 300 pcs. 15 pcs. 300 pcs. 15 pcs. 300 pcs. 12 pcs. 300 pcs. 12 pcs. 300 pcs. 50 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 25 pcs. 300 pcs. 20 pcs. 300 pcs. 15 pcs. 300 pcs. 12 pcs. 300 pcs. 12 pcs. 300 pcs. Panasonic Corporation Automation Controls Buisiness Division industrial.panasonic.com/ac/e/ –3– Embossed tape package Packing quantity Inner carton Header Outer carton (1 reel) AXN416330* AXN420330* AXN424330* AXN426330* AXN430330* AXN440330* AXN450330* AXN460330* AXN480330* — AXN416330* AXN424330* AXN426330* AXN430330* AXN460330* AXN416430P AXN420430P AXN426430P AXN430430P AXN440430P AXN450430P AXN460430P AXN480430P — AXN416430P AXN426430P AXN430430P AXN460430P AXN414530P Note 1) Note 1) “Asterisk” mark on “Asterisk” mark on AXN420530P end of part No.; end of part No.; AXN424530P J: 1,500 pieces J: 3,000 pieces AXN426530P (recommendation) (recommendation) P: 1,000 pieces P: 2,000 pieces AXN430530P Part No. Socket AXN316038* AXN320038* AXN324038* AXN326038* AXN330038* AXN340038* AXN350038* AXN360038* AXN380038* — AXN316238* AXN324238* AXN326238* AXN330238* AXN360238* AXN316038* AXN320038* AXN326038* AXN330038* AXN340038* AXN350038* AXN360038* AXN380038* — AXN316238* AXN326238* AXN330238* AXN360238* AXN314038* AXN320038* AXN324038* AXN326038* AXN330038* AXN340038* AXN350038* AXN360038* AXN380038* — AXN324238* AXN326238* AXN330238* AXN360238* AXN320130P AXN324130P AXN326130P AXN330130P AXN340130P AXN350130P AXN360130P AXN364130P AXN380130P — AXN320130P AXN322130P AXN326130P AXN330130P AXN340130P AXN350130P AXN360130P AXN380130P — AXN440530P AXN450530P AXN460530P AXN480530P — AXN424530P AXN426530P AXN430530P AXN460530P AXN420330* AXN424330* AXN426330* AXN430330* AXN440330* AXN450330* AXN460330* AXN464330* AXN480330* — AXN420430P AXN422430P AXN426430P AXN430430P AXN440430P AXN450430P AXN460430P AXN480430P — © Panasonic Corporation 2013 ACCTB25E 201310-T Narrow pitch connectors P8 (0.8mm pitch) Stick package Mated height 8.0 mm 13.0 mm 14.0 mm No. of pins Part No. AXN320130P AXN322130P AXN324130P AXN326130P AXN330130P AXN334130P AXN340130P AXN350130P AXN360130P AXN380130P — AXN320130P Embossed tape package Packing quantity Inner carton Header Outer carton (1 reel) AXN420530P AXN422530P AXN424530P AXN426530P AXN430530P 1,000 pcs. 2,000 pcs. AXN434530P AXN440530P AXN450530P AXN460530P AXN480530P — — — AXN420040P Note 6) Socket Header 20 22 24 26 30 34 40 50 60 80 100 20 AXN320130S AXN322130S AXN324130S AXN326130S AXN330130S AXN334130S AXN340130S AXN350130S AXN360130S AXN380130S AXN300130S AXN320130S AXN420530S AXN422530S AXN424530S AXN426530S AXN430530S AXN434530S AXN440530S AXN450530S AXN460530S AXN480530S AXN400530S AXN420030S Packing quantity Outer Stick carton 50 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 30 pcs. 300 pcs. 25 pcs. 300 pcs. 20 pcs. 300 pcs. 15 pcs. 300 pcs. 12 pcs. 300 pcs. 12 pcs. 300 pcs. 50 pcs. 300 pcs. Part No. 30 40 50 60 80 AXN330130S AXN340130S AXN350130S AXN360130S AXN380130S AXN430030S AXN440030S AXN450030S AXN460030S AXN480030S 30 pcs. 25 pcs. 20 pcs. 15 pcs. 12 pcs. 300 pcs. 300 pcs. 300 pcs. 300 pcs. 300 pcs. AXN330130P AXN340130P AXN350130P AXN360130P AXN380130P AXN430040P Note 6) AXN440040P Note 6) AXN450040P Note 6) AXN460040P Note 6) AXN480040P Note 6) 20 AXN320130S AXN420130S 50 pcs. 300 pcs. AXN320130P AXN420130P Socket Socket: 1,000 pcs. Socket: 2,000 pcs. Header: 500 pcs. Header: 1,000 pcs. Socket: 1,000 pcs. Header: 400 pcs. Socket: 2,000 pcs. Header: 800 pcs. Notes: 1. Please add following suffix at * marked positions. J: Inner carton (1 reel) 1,500 pcs. (Outer carton: 3,000 pcs.) P: Inner carton (1 reel) 1,000 pcs. (Outer carton: 2,000 pcs.) In order to reduce the amount of packaging materials used to help protect the global environment, it is recommended that each packaging box contains 1,500 units with the “J” product number suffix. As for the part No. P is suffixed, only 1,000 pcs. reel is available. 2. Regarding ordering units: During production: Please make orders in 1-reel units. Samples for mounting confirmation: Available in units of 50 pieces. Please contact our sales office. Samples: Please order it by a stick unit. 3. Connectors with suction tape and suction cover are also available. Socket: Suction tape, Header: Suction cover. For this type of connector, insert the letter “C” between the 6th and 7th column of the ordering number. Example: For a 20 pin contact socket with 3mm mated height (embossed tape package): AXN320C038P 4. The standard type comes with positioning bosses. Connectors without positioning bosses are available for on-demand production (3,000 pcs./lot or more). Please inquire. 5. Since the embossed tape width of 100 pin contact connectors packaged with embossed tape exceeds the JIS standard, please consult us. 6. Headers that have 13.0 mm mated height and embossed tape packaging do not come with positioning bosses. The depth of the embossed tape for headers with 13.0 mm and 14.0 mm mated heights is non-JIS compliant. Please test with your mounter before using. Panasonic Corporation Automation Controls Buisiness Division industrial.panasonic.com/ac/e/ –4– © Panasonic Corporation 2013 ACCTB25E 201310-T Narrow pitch connectors P8 (0.8mm pitch) SPECIFICATIONS 1. Characteristics Electrical characteristics Item Rated current Rated voltage Breakdown voltage Insulation resistance Specifications 0.5A 60V AC/DC 250V AC for 1 minute Min. 1,000MΩ Contact resistance Mechanical characteristics Conditions Detection current: 1mA Using 500V DC megger Based on the contact resistance measurement method specified by JIS C 5402. Max. 60mΩ Composite insertion force Composite removal force Max. 43.1N (30 pin contacts) Min. 6.37N (30 pin contacts) 40 pin contacts or less: Min. 1.96N 50 pin contacts or more: Min. 0.981N –55°C to +85°C Contact holding force Ambient temperature Soldering heat resistance Max. peak temperature of 245°C (on the surface of the PC board around the connector terminals) 300°C within 5 seconds –55°C to +85°C (product only) –40°C to +50°C (standard packing) Storage temperature Thermal shock resistance (header and socket mated) 5 cycles, insulation resistance min. 100MΩ, contact resistance max. 60mΩ Humidity resistance (header and socket mated) Saltwater spray resistance (header and socket mated) 120 hours, insulation resistance min. 100MΩ, contact resistance max. 60mΩ 24 hours, insulation resistance min. 100MΩ, contact resistance max. 60mΩ H2S resistance (header and socket mated) 48 hours, contact resistance max. 60mΩ SO2 resistance (header and socket mated) 48 hours, contact resistance max. 60mΩ Insertion and removal life 50 times Infrared reflow soldering Soldering iron No freezing at low temperatures. No dew condensation. Conformed to MIL-STD-202F, method 107G Order Temperature (°C) 1 –55 −30 2 3 85 +30 4 –55 −30 Environmental characteristics Lifetime characteristics Measuring the maximum force. As the contact & post is axially pull out. No freezing at low temperatures Time (minutes) 30 Max. 5 30 Max. 5 Bath temperature 40±2°C, humidity 90 to 95% R.H. Bath temperature 35±2°C, saltwarter concentration 5±1% Bath temperature 40±2°C, gas concentration 3±1 ppm, humidity 75 to 80% R.H. Bath temperature 40±2°C, gas concentration 10±3 ppm, humidity 90 to 95% R.H. Repeated insertion and removal speed of max. 200 times/hours Mated height 3mm 30 pin contacts; Socket: 0.26g Header: 0.26g 50 pin contacts; Socket: 0.40g Header: 0.44g Unit weight 2. Material and surface treatment Part name Molded portion Material Heat-resistant resin (UL94V-0) Contact/Post Copper alloy Surface treatment — Contact portion: Ni plating on base, Au plating on surface Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal) Panasonic Corporation Automation Controls Buisiness Division industrial.panasonic.com/ac/e/ –5– © Panasonic Corporation 2013 ACCTB25E 201310-T Narrow pitch connectors P8 (0.8mm pitch) DIMENSIONS (Unit: mm) The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/ • Mated height 3.0mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 6.0mm, 7.0mm, 8.0mm, 13.0mm, 14.0mm type 1) Socket CAD Data 7.10 4.80 7.90 9.50 10.30 11.10 11.90 13.50 15.10 17.50 21.50 25.50 27.10 33.50 41.50 7.90 9.50 10.30 11.10 11.90 13.50 15.10 17.50 21.50 25.50 27.10 33.50 41.50 5.60 7.20 8.00 8.80 9.60 11.20 12.80 15.20 19.20 23.20 24.80 31.20 39.20 E Mated height 3.0mm, 4.0mm, 5.0mm common 3.5mm, 4.5mm, 5.5mm common 6.0mm, 7.0mm, 8.0mm, 13.0mm, 14.0mm common F 0.8±0.05 dia. C±0.1 0.10 Recommended PC board pattern (TOP VIEW) General tolerance: ±0.3 E±0.05 0.80±0.05 0.80±0.05 0.50±0.05 0.15 Min.6.38 7.10 5.60 7.20 8.00 8.80 9.60 11.20 12.80 15.20 19.20 23.20 24.80 31.20 39.20 D 3.32±0.1 4.80 9.00 10.60 11.40 12.20 13.00 14.60 16.20 18.60 23.40 27.40 29.00 35.40 43.40 C 1.95±0.1 8.20 16 20 22 24 26 30 34 40 50 60 64 80 100 B 0.40+0.2 –0.1 No. of pins 14 5.88 4.93 0 1. C G Dimension table (mm) A 1.95±0.1 0.98 Terminal coplanarity F A B±0.15 0.80±0.1 0.80±0.1 0.35±0.1 D±0.05 2-0.9+0.1 0 dia. hole G 2.20 2.70 5.20 2) Header CAD Data G 1.95±0.1 Terminal coplanarity F A B±0.15 0.80±0.1 0.80±0.1 0.35±0.1 29.85 31.45 37.85 45.85 23.20 24.80 31.20 39.20 25.50 27.10 33.50 41.50 25.50 27.10 33.50 41.50 23.20 24.80 31.20 39.20 0.8±0.05 dia. C±0.1 General tolerance: ±0.3 D±0.05 E±0.05 0.80±0.05 0.80±0.05 0.50±0.05 Note) 0.15 Note: The 13 mm mated height (20 to 80 pin contacts) terminal flatness is 0.1 mm. Mated height 3.0mm, 3.5mm, 6.0mm common 4.0mm, 4.5mm, 7.0mm common 5.0mm, 5.5mm, 8.0mm common 13.0mm 14.0mm Recommended PC board pattern (TOP VIEW) Min.7.33 60 64 80 100 0.10 4.43±0.1 5.60 7.20 8.00 8.80 9.60 11.20 12.80 15.20 19.20 F 1.95±0.1 4.80 7.90 9.50 10.30 11.10 11.90 13.50 15.10 17.50 21.50 E 5.23 6.83 7.10 7.90 9.50 10.30 11.10 11.90 13.50 15.10 17.50 21.50 D 0.40+0.2 –0.1 7.10 5.60 7.20 8.00 8.80 9.60 11.20 12.80 15.20 19.20 C 10 4.80 10.05 11.65 12.45 13.25 14.05 15.65 17.25 19.65 25.85 B 1. 9.25 16 20 22 24 26 30 34 40 50 A C No. of pins 14 5.95 Dimension table (mm) 2-0.9+0.1 0 dia. hole G 2.72 3.72 4.72 10.14 11.14 Panasonic Corporation Automation Controls Buisiness Division industrial.panasonic.com/ac/e/ –6– © Panasonic Corporation 2013 ACCTB25E 201310-T Narrow pitch connectors P8 (0.8mm pitch) 3) Socket and header are mated 6.83 B +0.3 –0 Dimension table (mm) No. of pins 14 16 20 22 24 26 30 34 40 50 60 64 80 100 A A 9.25 10.05 11.65 12.45 13.25 14.05 15.65 17.25 19.65 25.85 29.85 31.45 37.85 45.85 Mated height 3.0mm 3.5mm 4.0mm 4.5mm 5.0mm 5.5mm 6.0mm 7.0mm 8.0mm 13.0mm 14.0mm B 3.00 3.50 4.00 4.50 5.00 5.50 6.00 7.00 8.00 13.00 14.00 Note: Common for all mated heights. EMBOSSED TAPE DIMENSIONS (unit: mm, Common for respective contact type, socket and header) • Tape dimensions (Conforming to JIS C 0806:1990. However, some tapes have mounting hole pitches that do not comply with the standard.) Tape I Tape II A±0.3 E+20 A±0.3 C B 1.75 4 2 D 1.5+0.1 0 dia. C Pull out direction Pull out direction • Paper reel dimensions (Conforming to JIS C 0806-1990) Label 1.75 4 2 Emboss carrier tape F D 1.5+0.1 0 dia. Panasonic Corporation Automation Controls Buisiness Division industrial.panasonic.com/ac/e/ Top cover tape –7– © Panasonic Corporation 2013 ACCTB25E 201310-T Narrow pitch connectors P8 (0.8mm pitch) Dimension table (mm) (1) Suffix: J (1 reel, 1,500 pieces embossed tape package) Mated height Socket: 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm Header: 3.0mm, 3.5mm, 6.0mm No. of pins Type of taping A B C D E F Quantity per reel 14 to 32 34 to 40 50 to 60 80 Tape I Tape II Tape II Tape II 24.0 32.0 44.0 56.0 — 28.4 40.4 52.4 11.5 14.2 20.2 26.2 12.0 12.0 12.0 12.0 24.4 32.4 44.4 56.4 370 dia. 370 dia. 370 dia. 370 dia. 1,500 pcs. (2) Suffix: P (1 reel, 1,000, 500, 350 and 250 pieces embossed tape package) Mated height Socket: 3.0mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm Header: 3.0mm, 3.5mm, 4.0mm, 4.5mm, 6.0mm, 7.0mm Socket: 6.0mm, 7.0mm, 8.0mm, 13.0mm, 14.0mm Header: 5.0mm, 5.5mm, 8.0mm Header: 13.0mm Header: 14.0mm No. of pins Type of taping A B C D E F Quantity per reel 14 to 32 34 to 40 50 to 60 80 Tape I Tape II Tape II Tape II 24.0 32.0 44.0 56.0 — 28.4 40.4 52.4 11.5 14.2 20.2 26.2 12.0 12.0 12.0 12.0 24.4 32.4 44.4 56.4 330 dia. 330 dia. 330 dia. 330 dia. 1,000 pcs. 14 to 32 34 to 40 50 to 60 80 20 30 40 50 60 80 20 Tape I Tape II Tape II Tape II Tape I Tape I Tape II Tape II Tape II Tape II Tape I 24.0 32.0 44.0 56.0 24.0 24.0 32.0 44.0 44.0 56.0 24.0 — 28.4 40.4 52.4 — — 28.4 40.4 40.4 52.4 — 11.5 14.2 20.2 26.2 11.5 11.5 14.2 20.2 20.2 26.2 11.5 12.0 12.0 12.0 12.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 24.4 32.4 44.4 56.4 24.4 24.4 32.4 44.4 44.4 56.4 24.4 370 dia. 370 dia. 370 dia. 370 dia. 370 dia. 370 dia. 370 dia. 370 dia. 370 dia. 370 dia. 370 dia. 1,000 pcs. 500 pcs. 500 pcs. 500 pcs. 500 pcs. 500 pcs. 500 pcs. 400 pcs. Connector orientation with respect to direction of progress of embossed tape Type Common for P8 Direction of tape progress Socket Header This corner is oriented on the C side. This corner is oriented on the C side. Please refer to the latest product specifications when designing your product. Panasonic Corporation Automation Controls Buisiness Division industrial.panasonic.com/ac/e/ –8– © Panasonic Corporation 2013 ACCTB25E 201310-T Notes on Using Narrow pitch Connectors Notes on Using Narrow pitch Connectors Regarding the design of devices and PC board patterns 1) When connecting several connectors together by stacking, make sure to maintain proper accuracy in the design of structure and mounting equipment so that the connectors are not subjected to twisting and torsional forces. 2) With mounting equipment, there may be up to a ±0.2 to 0.3-mm error in positioning. Be sure to design PC boards and patterns while taking into consideration the performance and abilities of the required equipment. 3) Some connectors have tabs embossed on the body to aid in positioning. When using these connectors, make sure that the PC board is designed with positioning holes to match these tabs. 4) To ensure the required mechanical strength when soldering the connector terminals, make sure the PC board meets recommended PC board pattern design dimensions given. 5) For all connectors of the narrow pitch series, to prevent the PC board from coming off during vibrations or impacts, and to prevent loads from falling directly on the soldered portions, be sure to design some means to fix the PC board in place. Example) Secure in place with screws Screw Spacer Connector PC board Spacer When connecting PC boards, take appropriate measures to prevent the connector from coming off. 6) Notes when using a FPC. (1) When the connector is soldered to an FPC board, during its insertion and removal procedures, forces may be applied to the terminals and cause the soldering to come off. It is recommended to use a reinforcement board on the backside of the FPC board to which the connector is being connected. Please make the reinforcement board dimensions bigger than the outer limits of the recommended PC board pattern (should be approximately 1 mm greater than the outer limit). Material should be glass epoxy or polyimide, and the thickness should be between 0.2 and 0.3 mm. (2) Collisions, impacts, or turning of FPC boards, may apply forces on the connector and cause it to come loose. Therefore, make to design retaining plates or screws that will fix the connector in place. 7) The narrow pitch connector series is designed to be compact and thin. Although ease of handling has been taken into account, take care when mating the connectors, as displacement or angled mating could damage or deform the connector. Regarding the selection of the connector placement machine and the mounting procedures 1) Select the placement machine taking into consideration the connector height, required positioning accuracy, and packaging conditions. 2) Be aware that if the catching force of the placement machine is too great, it may deform the shape of the connector body or connector terminals. 3) Be aware that during mounting, external forces may be applied to the connector contact surfaces and terminals and cause deformations. 4) Depending on the size of the connector being used, self alignment may not be possible. In such cases, be sure to carefully position the terminal with the PC board pattern. 5) The positioning bosses give an approximate alignment for positioning on the PC board. For accurate positioning of the connector when mounting it to the PC board, we recommend using an automatic positioning machine. Panasonic Corporation Automation Controls Buisiness Division industrial.panasonic.com/ac/e/ –9– 6) Excessive mounter chucking force may deform the molded or metal part of the connector. Consult us in advance if chucking is to be applied. © Panasonic Corporation 2013 ACCTB48E 201303-T Notes on Using Narrow pitch Connectors Regarding soldering Terminal Soldering conditions Please use the reflow temperature profile conditions recommended below for reflow soldering. Please contact us before using a temperature profile other than that described below (e.g. lead-free solder). • Narrow pitch connectors (except P8 type) Upper limited (Solder heat resistance) Lower limited (Solder wettability) Temperature 25 sec. 60 to 120 sec. • Narrow pitch connector (P8) Table A Product name Soldering iron temperature SMD type connectors 300°C within 5 sec. 350°C within 3 sec. 2) Do not allow flux to spread onto the connector leads or PC board. This may lead to flux rising up to the connector inside. 3) Touch the soldering iron to the foot pattern. After the foot pattern and connector terminal are heated, apply the solder wire so it melts at the end of the connector terminals. Temperature Apply the solder wire here Peak temperature 245°C max. 200°C Preheating Terminal 60 to 120 sec. Small angle as possible up to 45 degrees Within 30 sec. Time For products other than the ones above, please refer to the latest product specifications. 7) The temperatures are measured at the surface of the PC board near the connector terminals. (The setting for the sensor will differ depending on the sensor used, so be sure to carefully read the instructions that comes with it.) 8) The temperature profiles given in this catalog are values measured when using the connector on a resin-based PC board. When performed reflow soldering on a metal board (iron, aluminum, etc.) or a metal table to mount on a FPC, make sure there is no deformation or discoloration of the connector beforehand and then begin mounting. 9) Consult us when using a screenprinting thickness other than that recommended. 10) Some solder and flux types may cause serious solder or flux creeping. Solder and flux characteristics should be taken into consideration when setting the reflow soldering conditions. Panasonic Corporation Automation Controls Buisiness Division industrial.panasonic.com/ac/e/ 70 sec. Time Paste solder 4) Consult us when using a screenprinting thickness other than that recommended. 5) When mounting on both sides of the PC board and the connector is mounting on the underside, use adhesives or other means to ensure the connector is properly fixed to the PC board. (Double reflow soldering on the same side is possible.) 6) N2 reflow, conducting reflow soldering in a nitrogen atmosphere, increases the solder flow too greatly, enabling wicking to occur. Make sure that the solder feed rate and temperature profile are appropriate. 220°C 200°C Preheating 180°C 150°C 155 to 165°C PC board foot pattern Peak temperature Peak temperature 260°C 230°C 2. Hand soldering 1) Set the soldering iron so that the tip temperature is less than that given in the table below. So ld iro erin n g 1. Reflow soldering 1) Measure the recommended profile temperature for reflow soldering by placing a sensor on the PC board near the connector surface or terminals. (The setting for the sensor will differ depending on the sensor used, so be sure to carefully read the instructions that comes with it.) 2) As for cream solder printing, screen printing is recommended. 3) To determine the relationship between the screen opening area and the PCboard foot pattern area, refer to the diagrams in the recommended patterns for PC boards and metal masks. Make sure to use the terminal tip as a reference position when setting. Avoid an excessive amount of solder from being applied, otherwise, interference by the solder will cause an imperfect contact. –10– PC board Pattern 4) Be aware that soldering while applying a load on the connector terminals may cause improper operation of the connector. 5) Thoroughly clean the soldering iron. 6) Flux from the solder wire may get on the contact surfaces during soldering operations. After soldering, carefully check the contact surfaces and clean off any solder before use. 7) For soldering of prototype devices during product development, you can perform soldering at the necessary locations by heating with a hot-air gun by applying cream solder to the foot pattern beforehand. However, at this time, make sure that the air pressure does not move connectors by carefully holding them down with tweezers or other similar tool. Also, be careful not to go too close to the connectors and melt any of the molded components. 8) If an excessive amount of solder is applied during manual soldering, the solder may creep up near the contact points, or solder interference may cause imperfect contact. 3. Solder reworking 1) Finish reworking in one operation. 2) For reworking of the solder bridge, use a soldering iron with a flat tip. To prevent flux from climbing up to the contact surfaces, do not add more flux. 3) Keep the soldering iron tip temperature below the temperature given in Table A. © Panasonic Corporation 2013 ACCTB48E 201303-T Notes on Using Narrow pitch Connectors Handling Single Components 1) Make sure not to drop or allow parts to fall from work bench 2) Excessive force applied to the terminals could cause warping, come out, or weaken the adhesive strength of the solder. Handle with care. 3) Repeated bending of the terminals may cause terminals to break. 4) Do not insert or remove the connector when it is not soldered. Forcibly applied external pressure on the terminals can weaken the adherence of the terminals to the molded part or cause the terminals to lose their evenness. 5) Excessive prying-force applied to one end may cause product breakage and separation of the solder joints at the terminal. Excessive force applied for insertion in a pivot action as shown may also cause product breakage. Align the header and socket positions before connecting them. Cleaning flux from PC board 3) Since some powerful cleaning solutions may dissolve molded components of the connector and wipe off or discolor printed letters, we recommend aqua pura electronic parts cleaners. Please consult us if you wish to use other types of cleaning fluids. 4) Please note that the surfaces of molded parts may whiten when cleaned with alcohol. Handling the PC board Some connectors may change color slightly if subjected to ultraviolet rays during storage. This is normal and will not affect the operation of the connector. 3) When storing the connectors with the PC boards assembled and components alreeady set, be careful not to stack them up so the connectors are subjected to excessive forces. 4) Avoid storing the connectors in locations with excessive dust. The dust may accumulate and cause improper connections at the contact surfaces. 3) Before soldering, try not to insert or remove the connector more than absolutely necessary. 4) When coating the PC board after soldering the connector to prevent the deterioration of insulation, perform the coating in such a way so that the coating does not get on the connector. 5) There may be variations in the colors of products from different production lots. This is normal. 6) The connectors are not meant to be used for switching. 7) Be sure not to allow external pressure to act on connectors when assembling PCBs or moving in block assemblies. 1) To increase the cleanliness of the cleaning fluid and cleaning operations, prepare equipment for cleaning process beginning with boil cleaning, ultrasonic cleaning, and then vapor cleaning. 2) Carefully oversee the cleanliness of the cleaning fluids to make sure that the contact surfaces do not become dirty from the cleaning fluid itself. • Handling the PC board after mounting the connector When cutting or bending the PC board after mounting the connector, be careful that the soldered sections are subjected to excessive force. The soldered areas should not be subjected to force. Storage of connectors 1) To prevent problems from voids or air pockets due to heat of reflow soldering, avoid storing the connectors in areas of high humidity. When storing the connectors for more than six months, be sure to consider storage area where the humidity is properly controlled. 2) Depending on the connector type, the color of the connector may vary from connector to connector depending on when it is produced. Other Notes 1) These products are made for the design of compact and lightweight devices and therefore the thickness of the molded components has been made very thin. Therefore, be careful during insertion and removal operations for excessive forces applied may damage the products. 2) Dropping of the products or rough mishandling may bend or damage the terminals and possibly hinder proper reflow soldering. Panasonic Corporation Automation Controls Buisiness Division industrial.panasonic.com/ac/e/ –11– © Panasonic Corporation 2013 ACCTB48E 201303-T Notes on Using Narrow pitch Connectors Regarding sample orders to confirm proper mounting When ordering samples to confirm proper mounting with the placement machine, connectors are delivered in 50piece units in the condition given right. Consult a sale representative for ordering sample units. Please refer to the latest product specifications when designing your product. Condition when delivered from manufacturing Reel Embossed tape amount required for the mounting Required number of products for sample production (Delivery can also be made on a reel by customer request.) (Unit 50 pcs.) Panasonic Corporation Automation Controls Buisiness Division industrial.panasonic.com/ac/e/ –12– © Panasonic Corporation 2013 ACCTB48E 201303-T