HL (AZH)
Limit Switches
COMPACT SIZE
LIMIT SWITCHES
• Wide selections of actuators, terminals and
bodies to meet any application
• Excellent environmental resistance
Die-casting case—IEC IP67
Plastic case—IEC IP64
• Highly reliable operation
Bifurcated contact (Au clad) suitable for low-level
circuit control
• Connector type for easy installation
Easy on side installation with M4 screws
• Compact design good for limited mounting space
17% less mounting space compared with ML (AZ7)
Limit Switch
• Conforms to UL/CSA TÜV standards
PRODUCT TYPE
1. Limit Switches
Die-casting case
Type
Actuator
Standard
Push plunger
Roller plunger
Cross roller plunger
Panel mount push plunger
Panel mount roller plunger
Panel mount cross roller plunger
Sealed push plunger
Sealed roller plunger
Sealed cross roller plunger
Short roller lever
Roller lever
One-way short roller lever
One-way short lever
Flexible rod
Plastic case
Screw terminal
Screw terminal
AZH2031
AZH2032
AZH2033
AZH2011
AZH2012
AZH2013
AZH2041
AZH2021
AZH2044
AZH2024
—
Connector type
Bifurcated contact
Bifurcated
Without LED
With LED
Common to panel mount push plunger
Common to panel mount roller plunger
Common to panel mount cross roller plunger
AZH2231
AZH2331
AZH233116
AZH2232
AZH2332
AZH233216
AZH2233
AZH2333
AZH233316
AZH2211
AZH2311
AZH231116
AZH2212
AZH2312
AZH231216
AZH2213
AZH2313
AZH231316
AZH2241
AZH2341
AZH234116
AZH2221
AZH2321
AZH232116
AZH2244
AZH2344
AZH234416
AZH2224
AZH2324
AZH232416
—
—
—
Standard
Bifurcated
AZH1001
AZH1002
AZH1003
AZH1031
AZH1032
AZH1033
AZH1011
AZH1012
AZH1013
AZH1041
AZH1021
AZH1044
AZH1024
AZH1066
AZH1201
AZH1202
AZH1203
AZH1231
AZH1232
AZH1233
AZH1211
AZH1212
AZH1213
AZH1241
AZH1221
AZH1244
AZH1224
AZH1266
2. Accessories
Product
Pin arrangement
Type
Straight
Cable connector
cord
AC
Angle
Specifications
Core No.
Color of wire
Brown
White
4
Blue
Black
Conductor
Length of cable
0.5 mm2
(Circumference: 6.5 dia.)
3m
9.843 ft
Application
All connector
type
Part No.
AZH28113
AZH28133
FOREIGN STANDARDS
Standard
UL
CSA
TÜV
8
Applicable product
File no.:
E122222
Ratings: Normal load: 5 A, 250 VAC (105 cycles), Pilot Duty B300
Minute load:
0.1 A, 30 VDC
Certified products:
All models
File no.:
LR55880
Ratings: Normal load: 5 A, 250 VAC, Pilot Duty B300
Minute load:
0.1 A, 30 VDC
Certified products:
All models
File no.: Resin case type
J9650515
Die-cast case type J9650514
...
Ratings: Normal load for resin case type: AC–15 2A/250V~, DC–12 1A/30V —
...
Minute load for resin case type: DC–12 0.1A/30V —
...
Normal load for die-cast case type: DC–12 1A/30V —
...
Minute load for die-cast case type: DC–12 0.1A/30V —
Certified products: All models except those with LED lamps
10/2010
Part No.
Order using the standard part number.
Place a CE at the end of the part
number when ordering.
HL (AZH)
SPECIFICATIONS
1. Ratings
Load
Rated
control voltage
125 V AC
250 V AC
8 V DC
14 V DC
24 V DC
30 V DC
125 V DC
250 V DC
Standard type
Resistive
Lamp
Inductive
5A
5A
5A
5A
—
5A
0.5 A
0.25 A
1.5 A
1.5 A
—
—
—
—
—
—
3A
3A
1.5 A
1.5 A
—
1.5 A
0.05 A
0.03 A
Motor
N.C.
2A
1A
—
—
—
—
—
—
N.O.
1A
0.5 A
—
—
—
—
—
—
Bifurcated type
Without LED
With LED
Resistive
0.1 A
—
—
—
0.1 A
—
0.1 A
—
—
0.1 A
0.1 A
—
—
—
—
—
Notes: 1) Parameter of inductive load: AC power factor: Min. 0.4; DC time constant: Max. 7 ms.
2) Lamp load generates 10 times of inrush current. 3) Motor load generates 6 times of inrush current.
2. Characteristics
Contact arrangement
Contact resistance
Contact material
Insulation resistance
Initial breakdown voltage
Free position
Shock
resistance
Full operating position
Vibration resistance
Mechanical life
Electrical life
Ambient temperature
Ambient humidity
Max. switching frequency
Bifurcated type
Screw terminal
Connector type
1 Form C (Bifurcated contact)
Initial: Max. 100 mΩ
Initial: Max. 150 mΩ
Gold clad
Initial: Min. 100MΩ (at 500 V DC)
1,000 Vrms for 1 min. between non-consecutive terminals
1,500 Vrms for 1 min. between dead metal parts and terminals
1,500 Vrms for 1 min. between ground and terminals
Max. 98 m/s2 {10 G}
Max. 294 m/s2 {30 G}
10 to 55 Hz (Double amplitude for max. 1.5 mm)
107 (at 120 cpm)
5 × 105 (at 20 cpm, 5 A 250 V AC resistive load)
5 × 105 (at 20 cpm, 0.1 A 125 V AC resistive load)
–10 to +80°C +14 to +176°F
Max. 95% R.H.
Max. 120 cpm
Standard type
Screw terminal
1 Form C
Initial: Max. 15 mΩ
Silver alloy
3. Operating characteristics
• Die-cast case
Characteristics
Actuator
Panel mount push plunger
Panel mount roller plunger
Panel mount cross roller plunger
Sealed push plunger
Sealed roller plunger
Sealed cross roller plunger
Short roller lever
Roller lever
One-way short roller lever
One-way short lever
Operating
force, max.
N (gf)
11.8 (1200)
11.8 (1200)
11.8 (1200)
11.8 (1200)
11.8 (1200)
11.8 (1200)
3.92 (400)
2.45 (250)
3.92 (400)
2.45 (250)
Release force,
min. N (gf)
Pretravel, max.
mm (inch)
4.90 (500)
4.90 (500)
4.90 (500)
4.90 (500)
4.90 (500)
4.90 (500)
0.78 (80)
0.39 (40)
0.78 (80)
0.39 (40)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
2.0 (.079)
4.0 (.157)
2.0 (.079)
4.0 (.157)
Release force,
min. N (gf)
Pretravel, max.
mm (inch)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.98 (100)
0.78 (80)
0.39 (40)
0.78 (80)
0.39 (40)
—
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
1.5 (.059)
2.0 (.079)
4.0 (.157)
2.0 (.079)
4.0 (.157)
30.0 (1.181)
Movement differential, max.
mm (inch)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.3 (.012)
0.6 (.024)
0.3 (.012)
0.6 (.024)
Overtravel, min.
mm (inch)
Operating position,
max. mm (inch)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
4.0 (.157)
7.0 (.276)
4.0 (.157)
7.0 (.276)
17.4±0.8 (.685±.031)
23.4±0.8 (.921±.031)
23.4±0.8 (.921±.031)
30.0±0.8 (1.181±.031)
41.3±0.8 (1.626±.031)
41.3±0.8 (1.626±.031)
23.1±0.8 (.909±.031)
23.1±0.8 (.909±.031)
34.3±0.8 (1.350±.031)
34.3±0.8 (1.350±.031)
Overtravel, min.
mm (inch)
Operating position,
max. mm (inch)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
3.0 (.118)
4.0 (.157)
7.0 (.276)
4.0 (.157)
7.0 (.276)
20.0 (.787)0
25.4±0.8 (1.000±.031)
31.4±0.8 (1.236±.031)
31.4±0.8 (1.236±.031)
17.4±0.8 (.685±.031)
23.4±0.8 (.921±.031)
23.4±0.8 (.921±.031)
30.0±0.8 (1.181±.031)
41.3±0.8 (1.626±.031)
41.3±0.8 (1.626±.031)
23.1±0.8 (.909±.031)
23.1±0.8 (.909±.031)
34.3±0.8 (1.350±.031)
34.3±0.8 (1.350±.031)
—
• Plastic case
Characteristics
Actuator
Push plunger
Roller plunger
Cross roller plunger
Panel mount push plunger
Panel mount roller plunger
Panel mount cross roller plunger
Sealed push plunger
Sealed roller plunger
Sealed cross roller plunger
Short roller lever
Roller lever
One-way short roller lever
One-way short lever
Flexible rod
Operating
force, max.
N (gf)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
5.88 (600)
3.92 (400)
2.45 (250)
3.92 (400)
2.45 (250)
0.88 (90)
10/2010
Movement differential, max.
mm (inch)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.1 (.004)
0.3 (.012)
0.6 (.024)
0.3 (.012)
0.6 (.024)
—
9
HL (AZH)
4. Performance data for EN60947-5-1
Item
Rated insulated voltage
Impulse withstand voltage
Switching excess voltage
Rated closed thermocurrent
Conditional short-circuit current
Short-circuit protection
Protective construction
Degree of contamination
Plastic case
Standard
Plastic case
Bifurcated
Die-casting case
Standard
Die-casting case
Bifurcated
250V AC
2.5kV
2.5kV
5A
100A
10A Fuse
250V AC
2.5kV
0.8kV
1A
100A
10A Fuse
30V DC
1.5kV
0.8kV
5A
100A
10A Fuse
30V DC
1.5kV
0.8kV
1A
100A
10A Fuse
IP64 (switch)
IP54 (terminal)
IP64 (switch)
IP54 (terminal)
IP67
IP67
3
3
3
3
OUTPUT CIRCUIT
Wiring diagram
1) Screw terminal type
Internal circuit
2) L
ED wired type
Lamp lighting circuit
12
2
N.C.
N.C.
4
14
N.O.
N.O.
LED
resistance
11
3
COM
COM
Note: Since LED is connected to N.O. side,
the polarity of the load shall be + for N.O.
CONTACTS
Screw terminal type
Plunger type
Connector type
Lever type
1
4
2
3
The terminal cover
can be mounted in
both directions.
The terminal cover
can be mounted in
both directions.
COM
N.O.
COM
N.C.
LED rating
Rating
24 V DC
Leakage
current
1.5 mA
Internal
resistance
18 kΩ
The leakage current changes depends on the
resistance of load connected in parallel.
10
N.C.
N.O.
Protective construction
Die-cast
IEC standard
case
IP64
❍
IP67
❍
10/2010
Plastic case
❍
×
Contact No.
Terminals
1
2
3
4
—
N.C.
COM
N.O.
Color of leadwire
Brown
White
Blue
Black
HL (AZH)
DIMENSIONS
Die-cast case
1. Screw terminal
Panel mount push plunger
mm inch General tolerance: ±0.4 ±.016
44.5 1.752
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
Operating position
17.4±0.8
.685±.031 10
.394
8
.315
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
4.7
.185
0.5
.020
M14 (P = 1) threaded
2-panel mounting nut
Thickness 3 .118
Length of opposite side 17 .669
20.4
.803
28.4
1.118
56
2.205
18
.709
44.5 1.752
33±0.15
10 1.299±.006
.394
Operating position
23.4±0.8
.921±.031 17
.669
10
.394
8
.315
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
17.4±0.8
(.685±.031)
10.5 .413 dia. × width 4 .157
Stainless steel roller
4.7
.185
0.5
.020
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
20.4
.803
56
2.205
AZH2032
AZH2232
Appropriate total-travel range
M14 (P = 1) threaded
2-panel mounting nut
Thickness 3 .118
Length of opposite side 17 .669
28.4
1.118
18
.709
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
23.4±0.8
(.909±.031)
Panel mount cross roller plunger
44.5 1.752
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
Operating position
23.4±0.8
.921±.031 17
.669
10
.394
8
.315
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
10.5 .413 dia. × width 4 .157
Stainless steel roller
4.7
.185
0.5
.020
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
20.4
.803
56
2.205
AZH2033
AZH2233
Appropriate total-travel range
M14 (P = 1) threaded
2-panel mounting nut
Thickness 3 .118
Length of opposite side 17 .669
28.4
1.118
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
Panel mount roller plunger
Pretravel
1.5 max.
.059
Stainless steel
Appropriate total-travel range
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
AZH2031
AZH2231
8 dia.
.315
18
.709
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
23.4±0.8
(.909±.031)
Sealed push plunger
44.5 1.752
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
8 dia.
.315 Stainless steel
Sealed rubber
(Oil-tight synthetic rubber)
Operating position
30.0±0.8
1.181±.031
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
4.7
.185
0.5
.020
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
20.4
.803
28.4
1.118
AZH2011
AZH2211
56
2.205
10/2010
18
.709
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
30.0±0.8
(1.181±.031)
11
HL (AZH)
Sealed roller plunger
mm inch General tolerance: ±0.4 ±.016
44.5 1.752
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
Stainless steel roller
Sealed rubber
(Oil-tight synthetic rubber)
Operating position
41.3±0.8
1.626±.031
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
4.7
.185
0.5
.020
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
20.4
.803
28.4
1.118
AZH2012
AZH2212
Sealed cross roller plunger
56
2.205
18
.709
44.5 1.752
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
41.3±0.8
(1.626±.031)
10.5 .413 dia. × width 4 .157
Stainless steel roller
Sealed rubber
(Oil-tight synthetic rubber)
Operating position
41.3±0.8
1.626±.031
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
4.7
.185
0.5
.020
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
20.4
.803
28.4
1.118
AZH2013
AZH2213
56
2.205
18
.709
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
41.3±0.8
(1.626±.031)
Short roller lever
44.5 1.752
33±0.15
1.299±.006
4.7
.185
19
0.5
.748
.020
10
.394
13 10.5
.512 .413 4.5
.177
R24.4
R.961
4.2 +0.2
+0
Pretravel
2.0 max.
.079
Operating
position
23.1±0.8
.909±.031
20.4
.803
28.4
1.118
56
2.205
AZH2041
AZH2241
17.4
.685
.165 +.008
+0
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
18
.709
10.5 .413 dia. × width 4 .157
Stainless steel roller
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
3.92 (400)
0.78 (80)
2.0 (.079)
0.3 (.012)
4.0 (.157)
23.1±0.8
(.909±.031)
Roller lever
44.5 1.752
33±0.15
1.299±.006
4.7
.185
19
.748
0.5
.020
10
.394
13 10.5
.512 .413 4.5
.177
R43.9
R1.728
4.2 +0.2
+0
Operating
position
23.1±0.8
.909±.031
20.4
.803
28.4
1.118
12
17.4
.685
.165 +.008
+0
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
AZH2021
AZH2221
Pretravel
4.0 max.
.157
56
2.205
18
.709
10/2010
10.5 .413 dia. × width 4 .157
Stainless steel roller
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
23.1±0.8
(.909±.031)
HL (AZH)
One-way short roller lever
mm inch General tolerance: ±0.4 ±.016
R29.8
R1.173
Pretravel
2.0 max.
.079
33±0.15
1.299±.006
19
.748
10
.394
4.7
.185
Operating
position
34.3±0.8
1.350±.031
0.5
.020
13 10.5
.512 .413 4.5
.177
4.2 +0.2
+0
.165 +.008
+0
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
20.4
.803
28.4
1.118
AZH2044
AZH2244
17.4
.685
44.5 1.752
56 2.205
18
.709
10.5 .413 dia. × width 4 .157
Stainless steel roller
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
3.92 (400)
0.78 (80)
2.0 (.079)
0.3 (.012)
4.0 (.157)
34.3±0.8
(1.350±.031)
One-way roller lever
Pretravel
4.0 max.
.157
33±0.15
1.299±.006
19
.748
10
.394
R47.1
R1.854
4.7
.185
Operating
position
34.3±0.8
1.350±.031
0.5
.020
13 10.5
.512 .413 4.5
.177
4.2 +0.2
+0
.165 +.008
+0
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
20.4
.803
28.4
1.118
44.5 1.752
56 2.205
AZH2024
AZH2224
17.4
.685
18
.709
10.5 .413 dia. × width 4 .157
Stainless steel roller
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
34.3±0.8
(1.350±.031)
2. Connector type
Panel mount push plunger
44.5 1.752
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
Operating position
17.4±0.8
.685±.031 10
.394
8
.315
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
4.7
.185
0.5
.020
M14 (P = 1) threaded
2-panel mounting nut
Thickness 3 .118
Length of opposite side 17 .669
4.5
.177
20.4
.803
15 dia.
.591 dia.
LED
57.6
2.268
M12×1
Stainless steel
Appropriate total-travel range
4.2 +0.2
+0
.165 +.008
+0
28.4
1.118
AZH2331
AZH233116
8 dia.
.315
18
.709
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
17.4±0.8
(.685±.031)
Panel mount roller plunger
44.5 1.752
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
Operating position
23.4±0.8
.921±.031 17
.669
10
.394
8
.315
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
10.5 .413 dia. × width 4 .157
Stainless steel roller
4.7
.185
0.5
.020
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
20.4
.803
28.4
1.118
AZH2332
AZH233216
Appropriate total-travel range
M14 (P = 1) threaded
2-panel mounting nut
Thickness 3 .118
Length of opposite side 17 .669
15 dia.
.591 dia.
LED
57.6
2.268
10/2010
M12×1
18
.709
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
23.4±0.8
(.909±.031)
13
HL (AZH)
Panel mount cross roller plunger
mm inch General tolerance: ±0.4 ±.016
Pretravel
1.5 max.
.059
Operating position
23.4±0.8
.921±.031 17
.669
10
.394
8
.315
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
44.5 1.752
33±0.15
10.5 .413 dia. × width 4 .157
10 1.299±.006
Stainless steel roller
.394
Appropriate
total-travel range
M14 (P = 1) threaded
2-panel mounting nut
Thickness 3 .118
Length of opposite side 17 .669
4.7
.185
0.5
4.2 +0.2
+0
.020
.165 +.008
+0
4.5
.177
20.4
.803
28.4
1.118
LED
AZH2333
AZH233316
15 dia.
.591 dia.
57.6
2.268
M12×1
18
.709
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
23.4±0.8
(.921±.031)
Sealed push plunger
44.5 1.752
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
8 dia.
.315 Stainless steel
Sealed rubber
(Oil-tight synthetic rubber)
Operating position
30.0±0.8
1.181±.031
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
4.7
.185
0.5
.020
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
20.4
.803
28.4
1.118
LED
AZH2311
AZH231116
Sealed roller plunger
15 dia.
.591 dia.
57.6
2.268
M12×1
18
.709
44.5 1.752
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
30.0±0.8
(1.181±.031)
10.5 .413 dia. × width 4 .157
Stainless steel roller
Sealed rubber
(Oil-tight synthetic rubber)
Operating position
41.3±0.8
1.626±.031
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
4.7
.185
0.5
.020
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
20.4
.803
28.4
1.118
AZH2312
AZH231216
Sealed cross roller plunger
15 dia.
.591 dia.
LED
57.6
2.268
M12×1
18
.709
44.5 1.752
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
41.3±0.8
(1.626±.031)
10.5 .413 dia. × width 4 .157
Stainless steel roller
Sealed rubber
(Oil-tight synthetic rubber)
Operating position
41.3±0.8
1.626±.031
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
4.7
.185
0.5
.020
4.5
.177
4.2 +0.2
+0
.165 +.008
+0
20.4
.803
28.4
1.118
AZH2313
AZH231316
14
15 dia.
.591 dia.
LED
57.6
2.268
M12×1
10/2010
18
.709
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
11.8 (1200)
4.90 (500)
1.5 (.059)
0.1 (.004)
3.0 (.118)
41.3±0.8
(1.626±.031)
HL (AZH)
Short roller lever
mm inch General tolerance: ±0.4 ±.016
44.5 1.752
33±0.15
1.299±.006
4.7
.185
19
0.5
.748
.020
10
.394
R24.4
R.961
Pretravel
2.0 max.
.079
Operating
position
23.1±0.8
.909±.031
13 10.5
.512 .413 4.5
.177
4.2 +0.2
+0
.165 +.008
+0
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
20.4
.803
28.4
1.118
15 dia.
.591 dia.
57.6
2.268
LED
AZH2341
AZH234116
17.4
.685
18
.709
M12×1
Pretravel
4.0 max.
.157
R43.9
R1.728
13 10.5
.512 .413 4.5
.177
17.4
.685
Operating
position
23.1±0.8
.909±.031
4.2 +0.2
+0
.165 +.008
+0
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
20.4
.803
28.4
1.118
15 dia.
.591 dia.
57.6
2.268
LED
AZH2321
AZH232116
18
.709
M12×1
One-way short roller lever
R29.8
R1.173
Pretravel
2.0 max.
.079
33±0.15
1.299±.006
19
.748
10
.394
4.7
.185
4.2 +0.2
+0
.165 +.008
+0
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
20.4
.803
28.4
1.118
15 dia.
.591 dia.
LED
AZH2344
AZH234416
17.4
.685
Operating
position
34.3±0.8
1.350±.031
0.5
.020
13 10.5
.512 .413 4.5
.177
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
3.92 (400)
0.78 (80)
2.0 (.079)
0.3 (.012)
4.0 (.157)
23.1±0.8
(.909±.031)
Roller lever
44.5 1.752
33±0.15
1.299±.006
4.7
.185
19
.748
0.5
.020
10
.394
10.5 .413 dia. × width 4 .157
Stainless steel roller
44.5 1.752
57.6 2.268
18
.709
M12×1
One-way roller lever
Pretravel
4.0 max.
.157
33±0.15
1.299±.006
19
.748
10
.394
4.7
.185
R47.1
R1.854
Operating
position
34.3±0.8
1.350±.031
0.5
.020
13 10.5
.512 .413 4.5
.177
17.4
.685
4.2 +0.2
+0
.165 +.008
+0
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
20.4
.803
28.4
1.118
15 dia.
.591 dia.
AZH2324
AZH232416
LED
44.5 1.752
57.6 2.268
10/2010
M12×1
18
.709
10.5 .413 dia. × width 4 .157
Stainless steel roller
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
23.1±0.8
(.909±.031)
10.5 .413 dia. × width 4 .157
Stainless steel roller
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
3.92 (400)
0.78 (80)
2.0 (.079)
0.3 (.012)
4.0 (.157)
34.3±0.8
(1.350±.031)
10.5 .413 dia. × width 4 .157
Stainless steel roller
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
34.3±0.8
(1.350±.031)
15
HL (AZH)
Plastic case
mm inch General tolerance: ±0.4 ±.016
Push plunger
45 1.772
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
Operating position
25.4±0.8
10
1.000±.031 .394
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
16 dia.
.630
8 dia.
.315
8
.315
4.5
.177
4.7
.185
0.5
.020
4.2 +0.2
+0
.165 +.008
+0
20.4
.803
28.4
1.118
(58.9)
(2.319)
AZH1001
AZH1201
18
.709
45 1.772
33±0.15
10 1.299±.006
.394
Operating position
31.4±0.8
1.236±.031 17
.669 10
.394
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
8
.315
4.5
.177
4.7
.185
0.5
.020
10.5 .413 dia. × width 4 .157
Stainless steel roller
20.4
.803
(58.9)
(2.319)
AZH1002
AZH1202
16 dia.
.630
4.2 +0.2
+0
.165 +.008
+0
28.4
1.118
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
25.4±0.8
(1.000±.031)
18
.709
Appropriate total-travel range
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
31.4±0.8
(1.236±.031)
Cross roller plunger
45 1.772
10.5 .413 dia. × width 4 .157
33±0.15
Stainless steel roller
10 1.299±.006
.394
Appropriate total-travel range
Pretravel
1.5 max.
.059
Operating position
31.4±0.8
1.236±.031 17
.669 10
.394
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
8
.315
4.5
.177
4.7
.185
0.5
.020
20.4
.803
(58.9)
(2.319)
AZH1003
AZH1203
16 dia.
.630
4.2 +0.2
+0
.165 +.008
+0
28.4
1.118
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
Roller plunger
Pretravel
1.5 max.
.059
Appropriate total-travel range
18
.709
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
31.4±0.8
(1.236±.031)
Panel mount push plunger
45 1.772
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
Operating position
17.4±0.8
10
.685±.031
.394
8
.315
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
4.7
.185
0.5
.020
4.5
.177
16
8 dia.
.315
2-panel mounting nut
Thickness 3 .118
Length of opposite side 17 .669
4.2 +0.2
+0
.165 +.008
+0
20.4
.803
28.4
1.118
AZH1031
AZH1231
M14 (P = 1) threaded
(58.9)
(2.319)
18
.709
10/2010
Appropriate total-travel range
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
17.4±0.8
(.685±.031)
HL (AZH)
Panel mount roller plunger
mm inch General tolerance: ±0.4 ±.016
45 1.772
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
Operating position
23.4±0.8
.921±.031 17
.669 10
.394
8
.315
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
10.5 .413 dia. × width 4 .157
Stainless steel roller
2-panel mounting nut
Thickness 3 .118
Length of opposite side 17 .669
4.7
.185
0.5
.020
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
20.4
.803
28.4
1.118
(58.9)
(2.319)
AZH1032
AZH1232
18
.709
45 1.772
33±0.15
10 1.299±.006
.394
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
23.4±0.8
(.921±.031)
8
.315
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
10.5 .413 dia. × width 4 .157
Stainless steel roller
Appropriate total-travel range
M14 (P = 1) threaded
Operating position
23.4±0.8
.921±.031 17
.669 10
.394
2-panel mounting nut
Thickness 3 .118
Length of opposite side 17 .669
4.7
.185
0.5
.020
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
20.4
.803
28.4
1.118
(58.9)
(2.319)
AZH1033
AZH1233
18
.709
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
23.4±0.8
(.921±.031)
Sealed push plunger
45 1.772
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
Operating position
30±0.8
1.181±.031
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
4.7
.185
0.5
.020
8 dia.
.315
Sealed rubber
(Oil-tight synthetic rubber)
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
20.4
.803
28.4
1.118
(58.9)
(2.319)
AZH1011
AZH1211
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
Panel mount cross roller plunger
Pretravel
1.5 max.
.059
Appropriate total-travel range
M14 (P = 1) threaded
Sealed roller plunger
18
.709
45 1.772
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
30.0±0.8
(1.181±.031)
10.5 .413 dia. × width 4 .157
Stainless steel roller
Sealed rubber
(Oil-tight synthetic rubber)
Operating position
41.3±0.8
1.626±.031
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
4.7
.185
0.5
.020
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
20.4
.803
28.4
1.118
AZH1012
AZH1212
(58.9)
(2.319)
10/2010
18
.709
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
5.88 (600)
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
41.3±0.8
(1.626±.031)
17
HL (AZH)
Sealed cross roller plunger
mm inch General tolerance: ±0.4 ±.016
45 1.772
33±0.15
10 1.299±.006
.394
Pretravel
1.5 max.
.059
10.5 .413 dia. × width 4 .157
Stainless steel roller
Sealed rubber
(Oil-tight synthetic rubber)
Operating position
41.3±0.8
1.626±.031
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
4.7
.185
0.5
.020
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
20.4
.803
28.4
1.118
(58.9)
(2.319)
AZH1013
AZH1213
18
.709
R24.4
R.961
14.6
.575 10.5 4.5
.413 .177
4.2 +0.2
+0
.165 +.008
+0
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
Pretravel
2.0 max.
.079
20.4
.803
18
.709
45 1.772
58.9 2.319
AZH1041
AZH1241
17.4
.685
Operating
position
23.1±0.8
.909±.031
28.4
1.118
0.98 (100)
1.5 (.059)
0.1 (.004)
3.0 (.118)
41.3±0.8
(1.626±.031)
10.5 .413 dia. × width 4 .157
Nylon roller
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
3.92 (400)
0.78 (80)
2.0 (.079)
0.3 (.012)
4.0 (.157)
23.1±0.8
(.909±.031)
Roller lever
33±0.15
1.299±.006
19
4.7
.748
.185
10
.394
Pretravel
4.0 max.
.157
R43.9
R1.728
0.5
.020
14.6
.575 10.5 4.5
.413 .177
20.4
.803
28.4
1.118
18
.709
45 1.772
58.9 2.319
AZH1021
AZH1221
17.4
.685
Operating
position
23.1±0.8
.909±.031
4.2 +0.2
+0
.165 +.008
+0
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
5.88 (600)
Short roller lever
33±0.15
1.299±.006
4.7
19
.185
.748
10
0.5
.394
.020
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
10.5 .413 dia. × width 4 .157
Nylon roller
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
23.1±0.8
(.909±.031)
One-way short roller lever
Pretravel
2.0 max.
.079
R29.8
R1.173
33±0.15
1.299±.006
19
4.7
.748
.185
10
0.5
.394
.020
14.6
.575 10.5 4.5
.413 .177
Operating
position
34.3±0.8
1.350±.031
4.2 +0.2
+0
.165 +.008
+0
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
20.4
.803
28.4
1.118
AZH1044
AZH1244
18
17.4
.685
18
.709
45 1.772
58.9 2.319
10/2010
10.5 .413 dia. × width 4 .157
Nylon roller
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
3.92 (400)
0.78 (80)
2.0 (.079)
0.3 (.012)
4.0 (.157)
34.3±0.8
(1.350±.031)
HL (AZH)
One-way roller lever
mm inch General tolerance: ±0.4 ±.016
Pretravel
4.0 max.
.157
33±0.15
1.299±.006
4.7
19
.185
.748
10
.394
R47.1
R1.854
Operating
position
34.3±0.8
1.350±.031
0.5
.020
14.6
.575 10.5 4.5
.413 .177
4.2 +0.2
+0
.165 +.008
+0
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
20.4
.803
28.4
1.118
AZH1024
AZH1224
17.4
.685
10.5 .413 dia. × width 4 .157
Nylon roller
18
.709
45 1.772
58.9 2.319
Operating force, max.
N (gf)
Release force, min.
N (gf)
Pretravel, max.
mm (inch)
Movement differential,
max. mm (inch)
Overtravel, min.
mm (inch)
Operating position,
mm (inch)
2.45 (250)
0.39 (40)
4.0 (.157)
0.6 (.024)
7.0 (.276)
34.3±0.8
(1.350±.031)
45 1.772
33±0.15
1.299±.006
Flexible rod
(41.5)
(1.634)
104.2±1.5
4.102±.059
(18.2)
(.717)
4.7
.185
0.5
.020
4.2 +0.2
+0
.165 +.008
+0
4.5
.177
4.2 +0.2
+0 dia.
.165 +.008
dia.
+0
20.4
.803
28.4
1.118
AZH1066
AZH1266
(58.9)
(2.319)
18
.709
Operating force, max.
N (gf)
Pretravel, min.
mm (inch)
Overtravel, max.
mm (inch)
0.88 (90)
30.0 (1.181)
20.0 (.787)
Cable connected cord
Straight type
(15)
(.591)
6.5 dia.
.256 dia.
14 dia.
.551 dia.
37.5
1.476
M12×1
3000
118.11
(35)
(1.378)
(4)
(.157)
AC type
AZH28113
Angle type
M12×1
14 dia.
.551 dia.
(15)
(.591)
6.5 dia.
.256 dia.
28.7
1.130
30.4
1.197
3000
118.11
(35)
(1.378)
(4)
(.157)
AC type
AZH28133
10/2010
19
HL (AZH)
MOUNTING METHOD
Die-cast case
1. Side mounting (all types)
M4 screw is used for mounting on side.
Mount it firmly with washer. Mounting
torque is 1.37 to 1.57 N.m.
Remove the hexagonal nut when plunger
type is used in side mounting.
2. Panel mounting (Panel plunger type)
When the panel mounting type is fixed
on the panel, the torque of hexagonal nut
is set under 7.84 N.m.
Panel mounting hole dimensions
Side mounting hole dimensions
Plastic case
Side mounting (all types)
M4 screw is used for mounting on side.
Mount it firmly with washer. Mounting
torque is 1.18 to 1.47 N.m.
Side mounting hole dimensions
33±0.15
1.299±.006
14.5±0.2 dia.
.571±.008 dia.
33±0.15
1.299±.006
2-4.3 dia. or M4 screw hole
2-.169 dia.
2-4.3 dia. or M4 screw hole
2-.169 dia.
APPLICABLE WIRE
WIRING (For screw terminal)
(For screw terminal)
M3 small binding screw is used as a terminal screw. When wiring, don’t connect
the lead wire to the terminal directly.
Fasten the crimped terminals securely
applying a tightening torque of 0.20 to
0.29 N.m.
Sealed rubber of the lead wire is applicable for 6 dia. to 8 dia.
Applicable wire
Electric
wire name
Vinyl cabtyre cord
(VCTF)
Wire
strand
Conductor
Finished
outside
diameter
2-wire
0.75 mm2
1.25 mm2
2.0 mm2
6.6 mm dia.
7.4 mm dia.
8.0 mm dia.
3-wire
0.75 mm2
1.25 mm2
7.0 mm dia.
7.8 mm dia.
Approx. 45
Approx. 1.772
Approx. 15
Approx. .591
Take note the terminal arrangement is
different between plunger type and lever
type. The arrangement of N.C. and N.O.
is reversed.
Plunger type
COM
terminal
Approx. 30
Approx. 1.181
CONNECTOR TYPE
4) When the angle type of connector
cord is used, the cord outlet direction is
as follows.
Cord outlet direction (Right side)
N.C.
Contact No. 2
N.O.
Contact No. 4
COM
Contact No. 3
Contact No. of connector
2
1
Cord outlet direction (Left side)
3
4
Note: Contact No. 1 is not in use.
20
10/2010
N.C.
terminal
Lever type
COM
terminal
1) The cord outlet direction is interchangeable. Refer to “How to change the
cord outlet direction”.
2) Do not remove the connector over 50
times.
3) Wiring diagram as shown below.
N.O.
terminal
N.C.
terminal
N.O.
terminal
HL (AZH)
HOW TO CHANGE THE CORD OUTLET DIRECTION FOR CONNECTOR TYPE
The cord outlet direction is interchangeable both right and left sides. The direction of connector cord is set to the
right when it is shipped. When it is used left side direction, follow the next procedure.
Cord outlet direction (Right side)
Step 1
Fitting metal
Step 3
Step 2
Cramp
Body
Terminal cover
Seal rubber
• Do not put the lead wire between terminal cover and body.
• Put the seal rubber at the right place.
• Press up the terminal cover.
Push down the fitting metal while pulling
it horizontal direction.
Turn the terminal cover at an angle of
180 degree. Follow the procedure 3.
• Do not pull the terminal cover.
• Do not rotate the terminal cover many times.
• Do not loosen the terminal screw.
Cord outlet direction (Left side)
INDICATOR LIGHTING CIRCUIT
(Connector type only)
Internal circuit
Step 4
Attention
Attention
Confirm the fitting metal is on tightly.
If it is loosen, it might be cause of the
trouble.
1) See the circuit diagram.
2) Voltage across the terminal No. 3 and
No. 4 shall not exceed 24 V DC, with the
indicated polarity in the circuit diagram.
3) The LED is turned on when the switch
is at a free position. The LED is turned
off when the switch operates.
4) Applicable power source is 24 V DC.
Use it with care on leakage current. The
leakage current is approx. 1.5 mA at 24
V DC.
Switch
Contact No. 2
Load
Contact No. 4
+
LED
Resistance
Contact No. 3
−
CAUTIONS
Die-cast case
1) Do not expose HL limit switch to hot
water (over 60°C 140°F) and in a water
vapor environment.
2) Avoid the place where organic solvents, strong acid, strong alkali liquid and
vapor may attach to the products directly.
Prevent using the HL limit switch in place
where inflammable or corrosive gas will
be generated.
3) Do not change the operating position
by bending the actuator.
4) If O.T. is too big, the life of limit switch
will be shortened by switching friction.
Use it with enough margin of O.T. 70% of
O.T. standard value will be good.
5) Attach the terminal cover securely to
the body with the metal stop latch to the
projection of the body.
6) Confirmation test in the actual application is highly recommended.
7) Do not use the switch in a silicon
atmosphere. Care should be taken
where organic silicon rubber, adhesive,
seling material, oil, grease or lead wire
generates silicon.
Plastic case
1) Do not use in water or oil. Do not
place the switch where it is always
exposed to water or dust splash.
2) Do not expose HL limit switch to hot
water (over 60°C 140°F) and in a water
vapor environment.
3) Avoid the place where organic solvents, strong acid, strong alkali liquid and
vapor may attach to the products directly.
Prevent using the HL limit switch is place
where inflammable or corrosive gas will
be generated.
4) Do not change the operating position
by bending the actuator.
5) If O.T. is too big, the life of limit switch
will be shortened switching friction. Use it
with enough margin of O.T. 70% of O.T.
standard value will be good for use.
6) Attach the terminal cover securely to
the body to the extent you can identify
the clicking or locking sound.
7) A confirmation test in the actual application is highly recommended.
8) Do not use the switch in a silicon
atmosphere. Case should be taken
where organic silicon rubber, adhesive,
sealing material, oil, grease or lead wire
generates silicon.
10/2010
21