CP1AH-N-12V

High Carrying Current Type Miniature Low Profile Automotive Relay CP RELAYS POWER TYPE FEATURES Sealed • Maximum carrying current of 35 A (450 mW type, 16 V applied) made possible through using the same size as CP relays • Supports capacitor loads required for power supply applications 13 .512 14 .551 TYPICAL APPLICATIONS 9.5 .374 • Defoggers, Ignitions, Heaters, Accessories, Powered windows, etc. (Unit: mm inch) RoHS compliant ORDERING INFORMATION CP Contact arrangement 1H: 1 Form C Power type 1aH: 1 Form A Power type Operate (Set) voltage Nil: Max. 7.2 V DC N: Max. 6.5 V DC Rated coil voltage (DC) 12 V TYPES Contact arrangement Rated coil voltage Operate (Set) voltage (at 20°C 68°F) (Initial) Type No. 12 V DC Max. 7.2 V DC Max. 6.5 V DC Max. 7.2 V DC Max. 6.5 V DC CP1H-12V CP1H-N-12V CP1aH-12V CP1aH-N-12V 1 Form C 1 Form A Packing Carton (tube) Case 40 pcs. 1,000 pcs. Note: Other operate (set) voltage types are also available. Please inquire our sales representative for details. –1– ASCTB226E 201709-T CP-P (ACPP) RATING 1. Coil data Rated coil voltage Operate (Set) voltage (at 20°C 68°F) (Initial) Release (Reset) voltage (at 20°C 68°F) (Initial) Rated operating current [±10%] (at 20°C 68°F) Coil resistance [±10%] (at 20°C 68°F) Rated operating power (at 20°C 68°F) Usable voltage range (at 85°C 185°F) 12V DC Max. 7.2 V DC Max. 6.5 V DC Min. 1.0 V DC 37.5 mA 53.3 mA 320Ω 225Ω 450 mW 640 mW 10 to 16V DC 10 to 16V DC 2. Specifications Item Contact arrangement Contact resistance (initial) Contact material Rated switching capacity (resistive) Contact data Max. carrying current*1 Min. switching load (resistive)*2 Insulated resistance (initial) Time characteristics (initial) Operate (Set) time (at Rated voltage) Release (Reset) time (at Rated voltage) Functional Destructive Functional Destructive Mechanical Expected life Electrical Conditions for usage, transport and storage*3 Conditions N.O. side: 45 A for 2 minutes, 35 A for 1 hour (Coil applied voltage 16V DC, at 20°C 68°F) 40 A for 2 minutes, 30 A for 1 hour (Coil applied voltage 16V DC, at 85°C 185°F) 40 A for 2 minutes, 30 A for 1 hour (Coil applied voltage 16V DC, at 20°C 68°F) 35 A for 2 minutes, 25 A for 1 hour (Coil applied voltage 16V DC, at 85°C 185°F) Min. 100 MΩ (at 500V DC, Measurement at same location as “Dielectric strength” section.) Between open contacts Between contacts and coil Vibration resistance N.O. side: 20 A 14V DC, N.C. side: 10 A 14V DC 1 A 14V DC (at 20°C 68°F) Dielectric strength (initial) Shock resistance Specifications 1 Form A, 1 Form C Max. 100mΩ (N.O.: Typ. 6mΩ, N.C.: Typ. 8mΩ) (By voltage drop 1A 6V DC) Ag alloy Weight 500 Vrms for 1 min. (Detection current: 10mA) 500 Vrms for 1 min. (Detection current: 10mA) Max. 10ms (at 20°C 68°F, without bounce time) Max. 10ms (at 20°C 68°F, without bounce time) (without diode) Min. 100 m/s2 {approx. 10G} (Half-wave pulse of sine wave: 11ms; detection time: 10μs) Min. 1,000 m/s2 {approx. 100G} (Half-wave pulse of sine wave: 6ms) 10 to 100 Hz, Min. 44.1 m/s2 {approx. 4.5G} (Detection time: 10μs) 10 to 500 Hz, Min. 44.1 m/s2 {approx. 4.5G}, Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours Min. 107 (at 120 cpm) Min. 105 (at rated switching capacity, operating frequency: 1s ON, 9s OFF) Min. 105 (at Inrush 60A, Steady 1A 14 V DC, operating frequency: 1s ON, 9s OFF) Ambient temperature: –40 to +85°C –40 to +185°F, Humidity: 5 to 85% R.H. (Please avoid icing or condensation) Approx. 4.5 g .16 oz Notes: *1. Depends on connection conditions. Also, this does not guarantee repeated switching. We recommend that you confirm operation under actual conditions. *2. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *3. The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. For details, please refer to the “Automotive Relay Users Guide”. Please inquire our sales representative if you will be using the relay in a high temperature atmosphere (110°C 230°F). REFERENCE DATA 1-(1). Coil temperature rise (at room temperature) Sample : CP1H-12V, 3pcs Point measured : Inside the coil Carrying current: 10A, 15A, 20A, 25A, 30A, 35A Ambient temperature: 27°C 81°F 1-(2). Coil temperature rise (at 85°C 185°F) Sample : CP1H-12V, 3pcs Point measured : Inside the coil Carrying current: 10A, 15A, 25A, 30A Ambient temperature: 85°C 185°F 30A 100 25A 80 20A 15A 10A 60 120 100 30A 80 60 40 40 20 20 0 12 14 16 Coil applied voltage, V 25A 20A 0 15A 10A Coil applied voltage, VDC 35A 120 0 20 140 Temperature rise, °C Temperature rise, °C 140 2. Ambient temperature and usable voltage range Usable voltage range 15 10 Operate voltage: CP1H-12V (cold start) 5 Operate voltage: CP1H-N-12V (cold start) 0 12 14 16 Coil applied voltage, V –2– 0 -40 -20 0 20 40 60 80 100 120 Ambient temperature, °C ASCTB226E 201709-T CP-P (ACPP) 3-(1). Distribution of operate (set) and release (reset) voltage 3-(2). Distribution of operate (set) and release (reset) voltage Sample : CP1H-12V, 20pcs. Sample : CP1H-N-12V, 20pcs. 20 20 Operate voltage Release voltage Operate voltage Release voltage 15 Quantity, n 10 5 0 10 5 0 2 3 4 5 6 Voltage, V 0 7 0 2 3 4 5 6 Voltage, V 7 4-(1). Distribution of operate (set) and release (reset) time 4-(2). Distribution of operate (set) and release (reset) time Sample : CP1H-12V, 20pcs. Sample : CP1H-N-12V, 20pcs. * Without diode 20 20 Operate time Release time Operate time Release time 15 Quantity, n Quantity, n 15 10 5 5 0 1 2 3 Time, ms 0 4 5-(1). Electrical life test (at rated load) Sample : CP1H-12V Quantity : n = 6 Load : Resistive load (N.O. side : 20 A 14 V DC) Operating frequency : ON 1s, OFF 9s Ambient temperature : Room temperature Circuit: 14V DC 0 2 3 4 5 Time, ms 6 Change of operate (set) and release (reset) voltage 6 Operate and release voltage, V 0 10 Change of contact resistance 50 Contact welding: 0 times Miscontact: 0 times Max. Ave. Min. 5 Operate voltage 4 3 2 Max. Ave. Min. Release voltage Contact resistance, mΩ Quantity, n 15 Sample Capacitor 5 No. of operations, × 104 7 0 10 Change of operate (set) and release (reset) voltage 5 Operate voltage Max. Ave. Min. 3 Release voltage 0 5 No. of operations, × 104 Max. Ave. Min. 40 30 20 10 Max. Ave. Min. 1 0 0 5 No. of operations, × 104 –3– 10 50 4 2 Ave. Min. Change of contact resistance Contact welding: 0 times Miscontact: 0 times 6 20 Max. Contact resistance, mΩ Sample : CP1H-12V, 6pcs. Load : Inrush current 60A, steady current 1A Operating frequency : ON 1s, OFF 9s Ambient temperature : Room temperature Circuit: Operate and release voltage, V 5-(2). Electrical life test (at capacitor load) 0 30 10 1 0 40 10 0 0 5 No. of operations, × 104 10 ASCTB226E 201709-T CP-P (ACPP) DIMENSIONS (mm inch) The CAD data of the products with a mark can be downloaded from: http://industrial.panasonic.com/ac/e/ External dimensions 13 .512 3.5 .138 9.5 .374 0.4 .016 Max. 1.0 Max. .039 14 .551 PC board pattern (Bottom view) 4×0.9+0.1 0 4×.035+.004 0 Pre-soldering (all terminals) 2×1.5+0.3 −0.1 2×.059+.012 −.004 A surface level 2×0.3+0.3 −0.1 2×.012+.012 −.004 +0.3 1.5−0.1 .059+.012 −.004 2+0.3 −0.1 .079+.012 −.004 2×0.4+0.3 −0.1 2×.016+.012 −.004 1.7 .067 0.9 .035 3×2.0+0.1 0 3×.079+.004 0 (R 0.45) (R .018) 5.4 3.5 .213 .138 N.O. COM COIL 2×1.3+0.1 0 dia. (hole) 2×.051+.004 dia. (hole) 0 6.0 .236 10.7 .421 2.0 .079 Tolerance: ±0.1 ±.004 4.5 5.4 .177 .213 6 .236 5 .197 N.C. 4.5 .177 3.5 .138 2×1+0.3 −0.1 2×.039+.012 −.004 +0.3 0.4−0.1 +.012 .016−.004 2.5 +0.1 0 .098 +.004 0 5.0 .197 0.9 .035 Schematic (Bottom view) 6 .236 10.7 .421 2 .079 Dimension: Max. 1mm .039 inch: 1 to 3mm .039 to .118 inch: Min. 3mm .118 inch: Tolerance ±0.1 ±.004 ±0.2 ±.008 ±0.3 ±.012 * Dimensions (thickness and width) of terminal is measured after pre-soldering. Intervals between terminals is measured at A surface level. For general cautions for use, please refer to the “Automotive Relay Users Guide”. –4– ASCTB226E 201709-T