DE1A-L-9V

DE (ADE) VDE COMPACT HIGH-INSULATION POLARIZED POWER RELAY 25.0 .984 DE RELAYS (ADE) FEATURES 12.5 .492 12.5 .492 mm inch • Conforms to European safety standards (VDE0700 and VDE0631) Insulating distance between coil and contacts: Clearance Min. 8mm .315 inch Creepage distance Min. 8mm .315 inch • Extensive product line-up • Surge voltage between contact and coil 12 kV • Low operating power Nominal operating power at 200 mW (Single side stable, 2 coil latching) • Compact body saves space Size: 12.5(W) × 25.0(L) × 12.5(H) mm .492(W) × .984(L) × .492(H) inch • UL/CSA, VDE approved SPECIFICATIONS Contact Characteristics Arrangement 1 Form A Max. operating speed 20 cpm (at rated load) Min. 1,000 MΩ (at 500 V DC) Initial insulation resistance*1 Between open contacts Initial contact resistance, max. (By voltage drop 6V DC 1A) Rating (resistive load) 2 Form A AgSnO2 type Contact material Nominal switching capacity 1 Form A 1 Form B Initial breakdown voltage*2 30mΩ 10A 250V AC, 8A 250V AC, 8A 250V AC, 10A 30V DC 8A 30V DC 8A 30V DC Between contact sets Between contact and coil Surge voltage between contact and coil*3 1,000 Vrms 4,000 Vrms (2 Form A, 1 Form A 1 Form B) 5,000 Vrms Min. 12,000 V (initial) Max. switching power 2,500 VA*, 300W 2,000 VA*, 240W 2,000 VA*, 240W Operate time [Set time]*4 Max. 10ms (typ. 5ms) [Max. 10ms (typ. 4ms)] (at 20°C 68°F) Max. switching voltage 440V AC, 230V DC 440V AC, 230V DC 440V AC, 230V DC Release time (without diode) [Reset time]*4 Max. 5ms (typ. 2ms) [Max. 10ms (typ. 4ms)] (at 20°C 68°F) Max. switching current 10A (16A)* 8A (16A)* Min. switching capacity#1 100 mA, 5 V DC Mechanical (at 300cpm) 107 Electrical Expected (at 20 cpm) life (min. (resistive load) operations) Electrical (16A / 230 V AC resistive)* Max. 50°C Temperature rise (at 70°C)*5 8A (16A)* Shock resistance Functional*6 Min. 196 m/s2{20 G} Destructive*7 Min. 980 m/s2{100 G} Functional*8 10 to 55 Hz at double amplitude of 2 mm Destructive 10 to 55 Hz at double amplitude of 3 mm Vibration resistance 105(AC) 5 × 104(DC) 10 5 25000 20000 Conditions for operation, transport and storage*9 (Not freezing and condensing at low temperature) Unit weight Ambient temp. –40°C to 70°C –40°F to 158°F Humidity 5 to 85% R.H. Approx. 7 g .25 oz Coil (at 20°C, 68°F) Nominal operating power Single side stable 200 mW 1 coil latching 100 mW 2 coil latching 200 mW #1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. ds_61A01_0000_en_de: 151209D Remarks * 16A possible for one contact set only with max. 4000 VA switching power. *1 Measurement at same location as “Initial breakdown voltage” section. *2 Detection current: 10mA *3 Wave is standard shock voltage of ±1.2 × 50μs according to JEC-212-1981 *4 Nominal operating voltage applied to the coil, excluding contact bounce time. *5 By resistive method *6 Half-wave pulse of sine wave: 11ms, detection time: 10ms. *7 Half-wave pulse of sine wave: 6ms *8 Detection time: 10ms *9 Refer to “6. Usage, Storage and Transport Conditions” in AMBIENT ENVIRONMENT section in Relay Technical Information. 1 DE (ADE) TYPICAL APPLICATIONS ORDERING INFORMATION Ex. • Temperature controller • Automatic meter reading • OA equipment • FA equipment Product name DE 1a DE L Contact arrangement 1a: 1 Form A 1a1b: 1 Form A 1 Form B 2a: 2 Form A 3 Operating function Nil: Single side stable L: 1 coil latching L2: 2 coil latching Notes: 1) Standard packing; Carton (tube package) 20 pcs. Case 500 pcs. V Coil voltage, V DC 1.5, 3, 4.5, 5, 6, 9, 12, 24, 48** **just for single side stable 2) UL/CSA, VDE approved type is standard. TYPES AND COIL DATA (at 20°C 68°F) • Single side stable type 1 Form A, 1 Form A 1 Form B, 2 Form A Nominal voltage, V DC Pick-up voltage, V DC (max.) (initial) Drop-out voltage, V DC (min.) (initial) Coil resistance, Ω (±10%) Nominal operating current, mA (±10%) Nominal operating power, mW Max. allowable voltage, V DC 1.5 1.05 0.15 11.3 132.7 200 1.95 3 2.1 0.3 45 66.6 200 3.9 4.5 3.15 0.45 101 44.5 200 5.85 DE‰-5V 5 3.5 0.5 125 40 200 6.5 DE‰-6V 6 4.2 0.6 180 33.3 200 7.8 Part No. DE‰-1.5V DE‰-3V DE‰-4.5V DE‰-9V 9 6.3 0.9 405 22.2 200 11.7 DE‰-12V 12 8.4 1.2 720 16.6 200 15.6 DE‰-24V 24 16.8 2.4 2,880 8.3 200 31.2 DE‰-48V 48 33.6 4.8 11,520 4.2 200 62.4 Nominal voltage, V DC Set voltage, V DC (max.) (initial) Reset voltage, V DC (min.) (initial) Coil resistance, Ω (±10%) Nominal operating current, mA (±10%) Nominal operating power, mW Max. allowable voltage, V DC 1.5 1.05 1.05 22.5 66.6 100 1.95 3 2.1 2.1 90 33.3 100 3.9 4.5 3.15 3.15 202 22.3 100 5.85 DE‰-L-5V 5 3.5 3.5 250 20 100 6.5 DE‰-L-6V 6 4.2 4.2 360 16.7 100 7.8 • 1 coil latching type 1 Form A Part No. DE‰-L-1.5V DE‰-L-3V DE‰-L-4.5V DE‰-L-9V 9 6.3 6.3 812 11.1 100 11.7 DE‰-L-12V 12 8.4 8.4 1,440 8.3 100 15.6 DE‰-L-24V 24 16.8 16.8 5,760 4.2 100 31.2 Nominal voltage, V DC Set voltage, V DC (max.) (initial) Reset voltage, V DC (min.) (initial) Coil resistance, Ω (±10%) Nominal operating current, mA (±10%) Nominal operating power, mW Set coil Reset coil Set coil Reset coil Set coil Reset coil Max. allowable voltage, V DC 1.5 1.05 1.05 11.3 11.3 66.6 66.6 200 200 1.95 3 2.1 2.1 45 45 66.6 66.6 200 200 3.9 4.5 3.15 3.15 101 101 44.5 44.5 200 200 5.85 DE‰-L2-5V 5 3.5 3.5 125 125 40 40 200 200 6.5 DE‰-L2-6V 6 4.2 4.2 180 180 33.3 33.3 200 200 7.8 • 2 coil latching type 1 Form A Part No. DE‰-L2-1.5V DE‰-L2-3V DE‰-L2-4.5V DE‰-L2-9V 9 6.3 6.3 405 405 22.2 22.2 200 200 11.7 DE‰-L2-12V 12 8.4 8.4 720 720 16.6 16.6 200 200 15.6 DE‰-L2-24V 24 16.8 16.8 2,880 2,880 8.3 8.3 200 200 31.2 Note: Insert contact arrangement, e.g.1a, 1a1b, 2a, in ‰ for contact form required. 2 ds_61A01_0000_en_de: 151209D DE (ADE) DIMENSIONS mm inch PC board pattern (Bottom view) Single side stable 2 coil latching type 1 coil latching type Single side stable 1 coil latching type 25.0 .984 12.5 .492 15.24 .600 12.0 .472 7.62 .300 12.70 .500 8-1.2 dia 8-.047 dia 7.62 .300 7.62 .300 3.5 .138 0.8 .032 15.24 .600 7.62 .300 0.8 .032 1.0 .039 0.4 .016 7.62 .300 2.44 .096 Tolerance : ±0.1 ±.004 Schematic (Bottom view) Single side stable (1 Form A) 2 coil latching type 25.0 .984 1 3 4 8 6 5 (1 Form A 1 Form B) (2 Form A) 1 3 4 1 3 4 8 6 5 8 6 5 12.5 .492 12.0 .472 2.54 .100 2.54 .100 7.62 .300 0.5 .020 0.5 dia .020 dia 0.5 .020 0.5 dia .020 dia 6-1.2 dia 6-.047 dia (5,6: dummy terminal) (Deenergized condition) (1 Form A) (1 Form A 1 Form B) 1coil latching type 3.5 .138 0.5 dia .020 dia 12.70 .500 0.8 .032 7.62 .300 0.8 .032 1.0 .039 0.4 .016 7.62 .300 2.44 .096 1 3 4 1 8 6 5 8 (2 Form A) 3 4 1 3 4 6 5 8 6 5 (5,6: dummy terminal) (Reset condition) (1 Form A) (1 Form A 1 Form B) 2coil latching type Tolerance: ±0.3 ±.012 1 2 3 4 1 8 7 6 5 8 (5,6: dummy terminal) (2 Form A) 2 3 4 1 2 3 4 7 6 5 8 7 6 5 (Reset condition) REFERENCE DATA 2. Life curve Current, A Contact load, A 1. Max. switching power Contact voltage No. of operations 3.-(1) Coil temperature rise (1 Form A) 3.-(2) Coil temperature rise (1 Form A 1 Form B) 3.-(3) Coil temperature rise (2 Form A) Tested sample: ADE109 Quantity: n=6 Ambient temperature: 25°C to 70°C 77°F to 158°F Tested sample: ADE309 Quantity: n=6 Ambient temperature: 25°C to 70°C 77°F to 158°F Tested sample: ADE209 Quantity: n=6 Ambient temperature: 25°C to 70°C 77°F to 158°F 50 10A 0A 10A 0A 30 20 8A 0A 8A 30 0A 20 10 10 0 40 70 80 90 100 110 120 Coil applied voltage, %V ds_61A01_0000_en_de: 151209D 130 0 Temperature rise, °C 40 50 25°C 77°F 70°C 158°F 25°C 77°F 70°C 158°F Temperature rise, °C Temperature rise, °C 50 25°C 77°F 70°C 158°F 8A 40 8A 0A 0A 30 20 10 70 80 90 100 110 120 130 Coil applied voltage, %V 0 70 80 90 100 110 120 130 Coil applied voltage, %V 3 DE (ADE) 4-1. Operate/release time (1 Form A) 4-2. Operate/release time (1 Form A 1 Form B) 4-3. Operate/release time (2 Form A) Tested sample: DE1a-5V Quantity: n=5 Tested sample: DE1a1b-5V, Quantity: n=5 Tested sample: DE2a-5V, Quantity: n=5 7 40 10A 0A 10A 0A 30 20 10 6 Max. x Min. 5 4 3 70 80 90 100 110 120 Coil applied voltage, %V 130 Max. x Min. Max. x Min. Operate time 2 7 Operate time 6 Max. x Max. Min. x Min. 5 4 3 Release time (With diode) 2 Release time 1 0 8 Release time (With diode) Operate/release time, ms 25°C 77°F 70°C 158°F Operate/release time, ms Temperature rise, °C 50 0 70 80 90 100 Max. x Min. 1 110 120 0 130 Release time 70 80 Coil applied voltage, %V 90 100 110 120 130 Coil applied voltage, %V Tested sample: DE1a-5V, Ambient temperature: –40°C to 80°C –40°F to 176°F, Quantity: n=6 Tested sample: DE1a1b-5V, Ambient temperature: –40°C to 80°C –40°F to 176°F, Quantity: n=6 Tested sample: DE2a-5V, Ambient temperature: –40°C to 80°C –40°F to 176°F, Quantity: n=6 -40 -40 -20 -4 0 32 -10 -20 30 20 Drop-out voltage Pick-up voltage 10 0 20 40 68 104 60 140 80 176 Ambient temperature,°C °F -30 -40 -40 -20 -4 0 32 Rate of change, V% 5-3. Ambient temperature characteristics (2 Form A) Rate of change, V% 5-2. Ambient temperature characteristics (1 Form A 1 Form B) Rate of change, V% 5-1. Ambient temperature characteristics (1 Form A) 30 Drop-out 20 voltage 10 0 Pick-up voltage 20 40 60 80 68 104 140 176 -10 Ambient temperature,°C °F -20 -30 -40 -40 -20 -4 0 32 -10 -20 30 Drop-out 20 voltage Pick-up voltage 10 0 20 40 60 80 68 104 140 176 Ambient temperature,°C °F -30 Contact resistance, Ω 6. Change of contact resistance No. of operations For Cautions for Use, see Relay Technical Information. 4 ds_61A01_0000_en_de: 151209D