DK2A-PS

Automation Controls Catalog DK RELAY PC BOARD SOCKETS ACCESSORIES TYPES Type 1 Form A Single side stable 2 coil latching Part No. DK1a-PS DK1a-PSL2 1 Form A 1 Form B, 2 Form A Single side stable 2 coil latching DK2a-PS DK2a-PSL2 Standard packing: Carton: 50 pcs.; Case: 500 pcs RoHS compliant RELAY COMPATIBILITY Socket Relay 1 Form A Single side stable type 2 coil latching type 1 Form A 1 Form B, 2 Form A Single side stable type 2 coil latching type SPECIFICATIONS 1 Form A Single side 2 coil stable type latching type

—
— — 1 Form A 1 Form B, 2 Form A Single side 2 coil stable type latching type — — — —
— — —

Item Specifications 4,000 Vrms (Detection current: 10 mA) (Except the portion between coil terminals) Breakdown voltage (Initial) Insulation resistance (Initial) Heat resistance Min. 1,000 mΩ (at 500 V DC) 150°C (for 1 hour) Max. continuous current DIMENSIONS (mm inch) The CAD data of the products with a External dimensions CAD Data CAD Data 10 A (DK1a-PS, DK1a-PSL2), 8 A (DK2a-PS, DK2a-PSL2) mark can be downloaded from: http://industrial.panasonic.com/ac/e/ PC board pattern (Bottom view) 1 Form A 1 Form A 1 Form B, 2 Form A 15±0.6 .591±.024 1 2 6 5 3 4 1.2 dia. .047 dia. 1 2 3 4 8 7 6 5 1.2 dia. .047 dia. 23±0.6 .906±.024 2.54 .100 17±0.6 .669±.024 13.7±0.6 .539±.024 6±0.3 .236±.012 0.3±0.1 .012±.004 2.54±0.1 .100±.004 0.8 .031 7.62±0.3 7.62±0.3 .300±.012 .300±.012 3.4±0.3 .134±.012 2.54 .100 2.54 .100 2.54 .100 Tolerance: ±0.1 ±.004 0.25 .010 10.16±0.3 .400±.012 General tolerance: ±0.3 ±.012 Note: The above shows 2 coil latching type. No.2 and 5 terminal are eliminated on single side stable type. Note: The above shows 2 coil latching type. No.2 and 7 terminal are eliminated on single side stable type. FIXING AND REMOVAL METHOD 1. Match the direction of relay and socket. 3. Remove the relay, applying force in the direction shown below. 4. In case there is not enough space to grasp relay with fingers, use screwdrivers in the way shown below. 2. Both ends of the relay are to be secured firmly so that the socket hooks on the top surface of the relay. GOOD 2014.02 Notes: 1. Exercise care when removing relays. If greater than necessary force is applied at the socket hooks, deformation may alter the dimensions so that the hook will no longer catch, and other damage may also occur. 2. It is hazardous to use IC chip sockets. NO GOOD industrial.panasonic.com/ac/e/ –1– © Panasonic Corporation 2014 ASCTB265E 201402-T