ECA1EHG221

Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : NHG Type : A Features ● Endurance ● RoHS : 105 °C 1000 h to 2000 h compliant Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance –55 °C to +105 °C 6.3 V.DC to 100 V.DC 2.2 µF to 22000 µF –25 °C to +105 °C 160 V.DC to 450 V.DC 2.2 µF to 330 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Which is greater) Leakage current Dissipation factor (tan d) I < 0.06 CV +10 (µA) After 2 minutes Please see the attached characteristics list After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Endurance Shelf life Duration : 6.3 V.DC to 100 V.DC : (05 to 08)=1000 hours, (010 to 018)=2000 hours 160 V.DC to 450 V.DC : 2000 hours Capacitance change Within ±20 % of the initial value tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Frequency correction factor for ripple current Capacitance (µF) Rated voltage (V.DC) 6.3 to 100 160 to 450 2.2 47 1000 2.2 60 0.75 0.80 0.85 0.80 to 33 to 470 to 22000 to 330 120 1.00 1.00 1.00 1.00 Frequency (Hz) 1k 1.55 1.35 1.10 1.35 10 k 1.80 1.50 1.15 1.50 < 08 010< 100 k 2.00 1.50 1.15 1.50 fd±0.05 Dimensions Sleeve Pressure relief 06.3 < + L✽ 14 min. 0D±0.5 3 min. F±0.5 – 0D±0.5 ✽ L < 16 : L±1.0 L > 20 : L±2.0 (Unit : mm) 0D 5 6.3 8 10 12.5 16 18 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Oct. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 0D L 220 470 1000 2200 3300 4700 6800 10000 15000 22000 330 470 1000 2200 3300 4700 6800 10000 15000 100 220 330 470 1000 2200 3300 4700 6800 10000 47 100 220 330 470 1000 2200 3300 4700 6800 47 100 220 330 470 1000 2200 3300 4700 5 6.3 8 10 10 12.5 12.5 16 16 18 6.3 8 10 10 12.5 12.5 16 16 18 5 6.3 8 8 10 12.5 12.5 16 16 18 5 6.3 8 8 10 10 12.5 16 16 18 5 6.3 8 10 10 12.5 16 16 18 11 11.2 11.5 16 20 20 25 25 31.5 35.5 11.2 11.5 12.5 20 20 25 25 31.5 35.5 11 11.2 11.5 11.5 16 20 25 25 31.5 35.5 11 11.2 11.5 11.5 12.5 20 25 25 31.5 35.5 11 11.2 11.5 12.5 16 20 25 31.5 35.5 6.3 10 16 25 35 Specification Lead length (mm) Ripple Lead space Lead current tan d Endurance dia. (120 Hz) (120 Hz) Taping Taping (hours) (+105 °C) (+20 °C) 0d Straight ✽B ✽i (mA r.m.s.) 140 0.28 1000 0.5 2.0 5.0 2.5 230 0.28 1000 0.5 2.5 5.0 2.5 380 0.28 1000 0.6 3.5 5.0 710 0.30 2000 0.6 5.0 5.0 840 0.32 2000 0.6 5.0 5.0 1090 0.34 2000 0.6 5.0 5.0 1350 0.38 2000 0.6 5.0 5.0 1650 0.46 2000 0.8 7.5 7.5 2010 0.56 2000 0.8 7.5 2350 0.70 2000 0.8 7.5 200 0.24 1000 0.5 2.5 5.0 2.5 250 0.24 1000 0.6 3.5 5.0 460 0.24 2000 0.6 5.0 5.0 760 0.26 2000 0.6 5.0 5.0 1000 0.28 2000 0.6 5.0 5.0 1260 0.30 2000 0.6 5.0 5.0 1570 0.34 2000 0.8 7.5 7.5 1890 0.42 2000 0.8 7.5 2180 0.52 2000 0.8 7.5 110 0.20 1000 0.5 2.0 5.0 2.5 180 0.20 1000 0.5 2.5 5.0 2.5 260 0.20 1000 0.6 3.5 5.0 310 0.20 1000 0.6 3.5 5.0 560 0.20 2000 0.6 5.0 5.0 920 0.22 2000 0.6 5.0 5.0 1170 0.24 2000 0.6 5.0 5.0 1480 0.26 2000 0.8 7.5 7.5 1780 0.30 2000 0.8 7.5 2060 0.38 2000 0.8 7.5 91 0.16 1000 0.5 2.0 5.0 2.5 130 0.16 1000 0.5 2.5 5.0 2.5 230 0.16 1000 0.6 3.5 5.0 310 0.16 1000 0.6 3.5 5.0 380 0.16 2000 0.6 5.0 5.0 680 0.16 2000 0.6 5.0 5.0 1090 0.18 2000 0.6 5.0 5.0 1400 0.20 2000 0.8 7.5 7.5 1750 0.22 2000 0.8 7.5 2040 0.26 2000 0.8 7.5 90 0.14 1000 0.5 2.0 5.0 2.5 150 0.14 1000 0.5 2.5 5.0 2.5 270 0.14 1000 0.6 3.5 5.0 350 0.14 2000 0.6 5.0 5.0 460 0.14 2000 0.6 5.0 5.0 810 0.14 2000 0.6 5.0 5.0 1260 0.16 2000 0.8 7.5 7.5 1610 0.18 2000 0.8 7.5 1910 0.20 2000 0.8 7.5 Min. Packaging Q'ty Part No. Straight Taping leads (pcs) (pcs) ECA0JHG221( ) ECA0JHG471( ) ECA0JHG102( ) ECA0JHG222( ) ECA0JHG332( ) ECA0JHG472( ) ECA0JHG682( ) ECA0JHG103( ) ECA0JHG153 ECA0JHG223 ECA1AHG331( ) ECA1AHG471( ) ECA1AHG102( ) ECA1AHG222( ) ECA1AHG332( ) ECA1AHG472( ) ECA1AHG682( ) ECA1AHG103 ECA1AHG153 ECA1CHG101( ) ECA1CHG221( ) ECA1CHG331( ) ECA1CHG471( ) ECA1CHG102( ) ECA1CHG222( ) ECA1CHG332( ) ECA1CHG472( ) ECA1CHG682 ECA1CHG103 ECA1EHG470( ) ECA1EHG101( ) ECA1EHG221( ) ECA1EHG331( ) ECA1EHG471( ) ECA1EHG102( ) ECA1EHG222( ) ECA1EHG332( ) ECA1EHG472 ECA1EHG682 ECA1VHG470( ) ECA1VHG101( ) ECA1VHG221( ) ECA1VHG331( ) ECA1VHG471( ) ECA1VHG102( ) ECA1VHG222( ) ECA1VHG332 ECA1VHG472 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 100 100 50 2000 2000 1000 500 500 500 500 250 2000 1000 500 500 500 500 250 2000 2000 1000 1000 500 500 500 250 2000 2000 1000 1000 500 500 500 250 2000 2000 1000 500 500 500 250 · When requesting taped product, please put the letter “B” or “i” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Oct. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 2.2 50 63 100 0D 5 L 11 Specification Lead length (mm) Ripple Lead space Lead current tan d Part No. Endurance dia. (120 Hz) (120 Hz) Taping Taping (hours) Straight (+105 °C) (+20 °C) 0d ✽B ✽i (mA r.m.s.) 18 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG2R2( ) Min. Packaging Q'ty Straight Taping leads (pcs) (pcs) 200 2000 3.3 5 11 22 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG3R3( ) 200 2000 4.7 5 11 26 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG4R7( ) 200 2000 10 5 11 39 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG100( ) 200 2000 22 5 11 65 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG220( ) 200 2000 90 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG330( ) 200 2000 110 0.12 1000 0.5 2.5 5.0 2.5 ECA1HHG470( ) 200 2000 11.5 180 0.12 1000 0.6 3.5 5.0 ECA1HHG101( ) 200 1000 12.5 300 0.12 2000 0.6 5.0 5.0 ECA1HHG221( ) 200 500 33 5 11 47 6.3 11.2 100 8 220 10 330 10 16 410 0.12 2000 0.6 5.0 5.0 ECA1HHG331( ) 200 500 470 10 20 530 0.12 2000 0.6 5.0 5.0 ECA1HHG471( ) 200 500 5.0 500 1000 12.5 25 950 0.12 2000 0.6 5.0 ECA1HHG102( ) 200 2200 16 31.5 1470 0.14 2000 0.8 7.5 ECA1HHG222 100 3300 18 35.5 1770 0.16 2000 0.8 7.5 ECA1HHG332 50 10 5 11 46 0.10 1000 0.5 2.0 5.0 2.5 ECA1JHG100( ) 200 2000 22 5 11 71 0.10 1000 0.5 2.0 5.0 2.5 ECA1JHG220( ) 200 2000 33 6.3 11.2 100 0.10 1000 0.5 2.5 5.0 2.5 ECA1JHG330( ) 200 2000 47 6.3 11.2 120 0.10 1000 0.5 2.5 5.0 2.5 ECA1JHG470( ) 200 2000 100 10 12.5 215 0.10 2000 0.6 5.0 5.0 ECA1JHG101( ) 200 500 220 10 16 335 0.10 2000 0.6 5.0 5.0 ECA1JHG221( ) 200 500 330 10 20 510 0.10 2000 0.6 5.0 5.0 ECA1JHG331( ) 200 500 470 12.5 20 640 0.10 2000 0.6 5.0 5.0 ECA1JHG471( ) 200 500 1000 16 25 7.5 ECA1JHG102( ) 100 250 2200 18 35.5 930 0.10 2000 0.8 7.5 1610 0.12 2000 0.8 7.5 21 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG2R2( ) 200 2000 ECA1JHG222 50 2.2 5 11 3.3 5 11 31 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG3R3( ) 200 2000 4.7 5 11 38 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG4R7( ) 200 2000 10 6.3 11.2 54 0.08 1000 0.5 2.5 5.0 2.5 ECA2AHG100( ) 200 2000 22 6.3 11.2 93 0.08 1000 0.5 2.5 5.0 2.5 ECA2AHG220( ) 200 2000 33 8 11.5 130 0.08 1000 0.6 3.5 5.0 ECA2AHG330( ) 200 1000 47 10 12.5 165 0.08 2000 0.6 5.0 5.0 ECA2AHG470( ) 200 500 100 10 20 265 0.08 2000 0.6 5.0 5.0 ECA2AHG101( ) 200 500 220 12.5 25 440 0.08 2000 0.6 5.0 5.0 ECA2AHG221( ) 200 500 330 16 25 540 0.08 2000 0.8 7.5 7.5 ECA2AHG331( ) 100 250 470 16 25 715 0.08 2000 0.8 7.5 7.5 ECA2AHG471( ) 100 250 1000 18 35.5 985 0.08 2000 0.8 7.5 ECA2AHG102 50 · When requesting taped product, please put the letter “B” or “i” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Oct. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 0D L 2.2 3.3 4.7 10 22 33 47 100 220 330 2.2 3.3 4.7 10 22 33 47 100 220 2.2 3.3 4.7 10 22 33 47 100 2.2 3.3 4.7 10 22 33 47 100 6.3 6.3 6.3 10 10 10 12.5 16 16 18 6.3 6.3 8 10 10 12.5 12.5 16 18 6.3 8 8 10 12.5 12.5 12.5 16 8 10 10 10 12.5 16 16 18 11.2 11.2 11.2 12.5 20 20 20 25 31.5 31.5 11.2 11.2 11.5 16 20 20 20 25 31.5 11.2 11.5 11.5 16 20 20 25 31.5 11.5 12.5 16 20 20 25 25 31.5 160 200 250 350 Specification Lead length (mm) Ripple Lead space current tan d Lead Endurance dia. (120 Hz) (120 Hz) Taping Taping (hours) (+105 °C) (+20 °C) 0d Straight ✽B ✽i (mA r.m.s.) 25 0.15 2000 0.5 2.5 5.0 2.5 36 0.15 2000 0.5 2.5 5.0 2.5 43 0.15 2000 0.5 2.5 5.0 2.5 70 0.15 2000 0.6 5.0 5.0 130 0.15 2000 0.6 5.0 5.0 180 0.15 2000 0.6 5.0 5.0 220 0.15 2000 0.6 5.0 5.0 335 0.15 2000 0.8 7.5 7.5 540 0.15 2000 0.8 7.5 705 0.15 2000 0.8 7.5 25 0.15 2000 0.5 2.5 5.0 2.5 36 0.15 2000 0.5 2.5 5.0 2.5 50 0.15 2000 0.6 3.5 5.0 80 0.15 2000 0.6 5.0 5.0 140 0.15 2000 0.6 5.0 5.0 190 0.15 2000 0.6 5.0 5.0 220 0.15 2000 0.6 5.0 5.0 335 0.15 2000 0.8 7.5 7.5 575 0.15 2000 0.8 7.5 29 0.15 2000 0.5 2.5 5.0 2.5 42 0.15 2000 0.6 3.5 5.0 50 0.15 2000 0.6 3.5 5.0 88 0.15 2000 0.6 5.0 5.0 155 0.15 2000 0.6 5.0 5.0 190 0.15 2000 0.6 5.0 5.0 230 0.15 2000 0.6 5.0 5.0 365 0.15 2000 0.8 7.5 31 0.20 2000 0.6 3.5 5.0 38 0.20 2000 0.6 5.0 5.0 50 0.20 2000 0.6 5.0 5.0 82 0.20 2000 0.6 5.0 5.0 130 0.20 2000 0.6 5.0 5.0 195 0.20 2000 0.8 7.5 7.5 230 0.20 2000 0.8 7.5 7.5 375 0.20 2000 0.8 7.5 Min. Packaging Q'ty Part No. Straight Taping leads (pcs) (pcs) ECA2CHG2R2( ) ECA2CHG3R3( ) ECA2CHG4R7( ) ECA2CHG100( ) ECA2CHG220( ) ECA2CHG330( ) ECA2CHG470( ) ECA2CHG101( ) ECA2CHG221 ECA2CHG331 ECA2DHG2R2( ) ECA2DHG3R3( ) ECA2DHG4R7( ) ECA2DHG100( ) ECA2DHG220( ) ECA2DHG330( ) ECA2DHG470( ) ECA2DHG101( ) ECA2DHG221 ECA2EHG2R2( ) ECA2EHG3R3 ECA2EHG4R7( ) ECA2EHG100( ) ECA2EHG220( ) ECA2EHG330( ) ECA2EHG470( ) ECA2EHG101 ECA2VHG2R2( ) ECA2VHG3R3( ) ECA2VHG4R7( ) ECA2VHG100( ) ECA2VHG220( ) ECA2VHG330( ) ECA2VHG470( ) ECA2VHG101 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 200 100 50 200 200 200 200 200 200 200 100 200 200 200 200 200 100 100 50 2000 2000 2000 500 500 500 500 250 2000 2000 1000 500 500 500 500 250 2000 1000 1000 500 500 500 500 1000 500 500 500 500 250 250 · When requesting taped product, please put the letter “B” or “i” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Oct. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 2.2 400 450 0D 8 Specification Lead length (mm) Ripple Lead space Lead current tan d Part No. Endurance dia. (120 Hz) (120 Hz) L Taping Taping (hours) Straight (+105 °C) (+20 °C) 0d ✽B ✽i (mA r.m.s.) 11.5 30 0.24 2000 0.6 3.5 5.0 ECA2GHG2R2( ) Min. Packaging Q'ty Straight Taping leads (pcs) (pcs) 200 1000 3.3 10 12.5 40 0.24 2000 0.6 5.0 5.0 ECA2GHG3R3( ) 200 500 4.7 10 16 50 0.24 2000 0.6 5.0 5.0 ECA2GHG4R7( ) 200 500 10 10 20 80 0.24 2000 0.6 5.0 5.0 ECA2GHG100( ) 200 500 22 12.5 25 145 0.24 2000 0.6 5.0 5.0 ECA2GHG220( ) 200 500 7.5 ECA2GHG330( ) 100 250 ECA2GHG470 100 33 16 25 195 0.24 2000 0.8 7.5 47 16 31.5 250 0.24 2000 0.8 7.5 2.2 10 12.5 29 0.24 2000 0.6 5.0 5.0 ECA2WHG2R2( ) 200 500 3.3 10 16 41 0.24 2000 0.6 5.0 5.0 ECA2WHG3R3( ) 200 500 4.7 10 20 49 0.24 2000 0.6 5.0 5.0 ECA2WHG4R7( ) 200 500 12.5 20 75 0.24 2000 0.6 5.0 5.0 ECA2WHG100( ) 200 500 7.5 ECA2WHG220( ) 100 250 ECA2WHG330 100 10 22 16 25 115 0.24 2000 0.8 7.5 33 16 31.5 155 0.24 2000 0.8 7.5 · When requesting taped product, please put the letter “B” or “i” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Oct. 2016