ECEA1HKA0R1

Aluminum Electrolytic Capacitors/ KA Low Profile Radial Lead Type KA Series: KA Type: 7 mm height A 앖 M ■ Features ● Endurance : 85° C 1000 h ● 7 mm height ● RoHS directive compliant ■ Specifications Category Temp. Range –40 °C to +85 °C Rated W.V. Range 4 V.DC to 50 V.DC Nominal Cap. Range 0.1 µF to 470 µF Capacitance Tolerance ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) DC Leakage Current tan δ Please see the attached standard products list After applying rated working voltage for 1000 hours at +85 °C±2 °C when the capacitors are restored to 20 °C, capacitors shall meet the following limits. Endurance Shelf Life Capacitance change ± 20% of initial measured value tan δ < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) ■ Dimensions in mm (not to scale) [mm] Sleeve φd±0.05 + L±1.0 14 min. 3 min. φD±0.5 F±0.5 – (mm) Body Dia. φD 4 5 6.3 8 Lead Dia. φd 0.45 0.45 0.45 0.45 Lead space F 1.5 2.0 2.5 3.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EE131 – 00 Sep. 2010 Aluminum Electrolytic Capacitors/ KA ■ Standard Products Case size W.V. (V) 4 Cap. (±20 %) (µF) 4 7 100 5 220 6.3 330 35 Straight Taping Taping ✽B ✽i (mm) (mm) (mm) (mm) 0.45 1.5 5.0 2.5 Part No. Straight Taping Leads (pcs) (pcs) ECEA0GKA470( ) 200 2000 34 0.35 7 61 0.35 0.45 2.0 5.0 2.5 ECEA0GKA101( ) 200 2000 7 82 0.35 0.45 2.5 5.0 2.5 ECEA0GKA221( ) 200 2000 3.5 ECEA0GKA331( ) 200 8 7 110 0.35 0.45 8 7 110 0.35 0.45 2.5 5.0 140 0.35 0.45 140 0.35 0.45 47 4 7 46 0.24 0.45 1.5 5.0 2.5 ECEA0JKA470( ) 200 2000 100 5 7 71 0.24 0.45 2.0 5.0 2.5 ECEA0JKA101( ) 200 2000 5.0 2.5 ECEA0JKA221( ) 200 2000 2.5 ECEA0JKA331( ) 200 1000 220 3.5 5.0 6.3 7 103 0.24 0.45 2.5 8 7 130 0.24 0.45 3.5 8 7 130 0.24 0.45 33 4 7 43 0.20 0.45 100 6.3 7 80 0.20 8 7 120 0.20 8 7 120 0.20 0.45 4 7 28 0.16 0.45 2.5 1000 1000 ECEA0GKA331Q 7 ECEA0GKA471( ) 200 5.0 1000 1000 ECEA0GKA471Q 1000 ECEA0JKA331Q 1.5 5.0 2.5 ECEA1AKA330( ) 200 2000 0.45 2.5 5.0 2.5 ECEA1AKA101( ) 200 2000 0.45 3.5 2.5 ECEA1AKA221( ) 200 1000 5.0 1000 ECEA1AKA221Q 1.5 5.0 2.5 ECEA1CKA100( ) 200 2000 22 4 7 39 0.16 0.45 1.5 5.0 2.5 ECEA1CKA220( ) 200 2000 33 5 7 60 0.16 0.45 2.0 5.0 2.5 ECEA1CKA330( ) 200 2000 47 5 7 70 0.16 0.45 2.0 5.0 2.5 ECEA1CKA470( ) 200 2000 100 6.3 7 91 0.16 0.45 2.5 5.0 2.5 ECEA1CKA101( ) 200 2000 10 4 7 28 0.14 0.45 1.5 5.0 2.5 ECEA1EKA100( ) 200 2000 22 5 7 55 0.14 0.45 2.0 5.0 2.5 ECEA1EKA220( ) 200 2000 33 6.3 7 65 0.14 0.45 2.5 5.0 2.5 ECEA1EKA330( ) 200 2000 47 6.3 7 70 0.14 0.45 2.5 5.0 2.5 ECEA1EKA470( ) 200 2000 10 5 7 30 0.12 0.45 2.0 5.0 2.5 ECEA1VKA100( ) 200 2000 22 6.3 7 60 0.12 0.45 2.5 5.0 2.5 ECEA1VKA220( ) 200 2000 5.0 2.5 ECEA1VKA330( ) 200 2000 2.5 ECEA1VKA470( ) 200 1000 33 47 50 Lead Space 7 10 25 Lead Dia. Min. Packaging Q'ty 8 220 16 Lead Length 8 330 10 (mm) 47 470 6.3 Dia. Specification Ripple tan δ Current Length (120 Hz) (120 Hz) (+85 °C) (+20 °C) (mm) (mA r.m.s.) 6.3 7 65 0.12 0.45 2.5 8 7 85 0.12 0.45 3.5 8 7 85 0.12 0.45 0.1 4 7 1 0.10 0.45 1.5 5.0 5.0 2.5 ECEA1HKA0R1( ) 200 2000 1000 0.22 4 7 2 0.10 0.45 1.5 5.0 2.5 ECEA1HKAR22( ) 200 2000 0.33 4 7 3 0.10 0.45 1.5 5.0 2.5 ECEA1HKAR33( ) 200 2000 ECEA1VKA470Q 0.47 4 7 5 0.10 0.45 1.5 5.0 2.5 ECEA1HKAR47( ) 200 2000 1 4 7 10 0.10 0.45 1.5 5.0 2.5 ECEA1HKA010( ) 200 2000 2.2 4 7 16 0.10 0.45 1.5 5.0 2.5 ECEA1HKA2R2( ) 200 2000 3.3 4 7 18 0.10 0.45 1.5 5.0 2.5 ECEA1HKA3R3( ) 200 2000 4.7 4 7 23 0.10 0.45 1.5 5.0 2.5 ECEA1HKA4R7( ) 200 2000 10 5 7 35 0.10 0.45 2.0 5.0 2.5 ECEA1HKA100( ) 200 2000 22 6.3 7 60 0.10 0.45 2.5 5.0 2.5 ECEA1HKA220( ) 200 2000 8 7 75 0.10 0.45 3.5 2.5 ECEA1HKA330( ) 200 1000 8 7 75 0.10 0.45 33 5.0 ECEA1HKA330Q 1000 Endurance : 85 °C 1000 h When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, i=2.5 mm. The taping dimensions are explained on EE189 of our Catalog. Please use it as a reference guide. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – EE132 – 00 Sep. 2010