ECHU1H683GC9

Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor Type: ECHU(C) Stacked metallized PPS film as dielectric with simple mold-less construction ■Features • Small in size • Low loss and excellent frequency characteristics • RoHS directive compliant ■Recommended Applications • Time-constant • Filtering • Oscillation and resonance • Resonance circuit for LCD backlight inverter unit ■Explanation of Numbers 1 2 3 4 E C H U Product code Dielectric & construction 5 6 7 8 9 10 11 12 C Rated voltage Capacitance 1H 50 VDC 1 100 VDC Cap. Tol. Suffix G ±2 % J ±5 % Suffix 9 V Tape width 12 mm 16 mm ■Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage Capacitance range Capacitance tolerance Withstand voltage Dissipation factor (tan ) Insulation resistance (IR) 50 VDC : -55 ˚C to +125 ˚C 100 VDC : -55 ˚C to +105 ˚C 50 VDC, 100 VDC (50 VDC : 0.12 µF or more : Derating of rated voltage by 1.25 %/ ˚C at more than 105 ˚C) 0.047 µF to 0.22 µF(E12) 50 VDC 100 VDC 0.010 µF to 0.22 µF(E12) ±2 %(G), ±5 %(J) 50 VDC : Between terminals : Rated volt. (VDC)✕175 % 1 s to 5 s 100 VDC : Between terminals : Rated volt. (VDC)✕160 % 60 s tan < =0.6 % (20 ˚C, 1 kHz) >3000 MΩ (20 ˚C, 50 VDC, 60 s) 50 VDC : IR= >3000 MΩ (20 ˚C, 100 VDC, 60 s) 100 VDC : IR= 50 VDC Flow soldering : 260 ˚C max., 5 s max. Reflow soldering : 260 ˚C max. and 30 s max. at more than 230 ˚C (Temp. at cap. Surface) 100 VDC Reflow soldering : 260 ˚C max. and 30 s max. at more than 230 ˚C (Temp. at cap. Surface) Soldering conditions ❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Mar. 2006 Plastic Film Capacitors ■Dimensions in mm (not to scale) ■ Construction size L W H code E1 4.8 3.3 1.4 E2 4.8 3.3 2.0 E3a 4.8 3.3 2.4 E3 4.8 3.3 2.8 D1 6.0 4.1 1.8 D2 6.0 4.1 2.0 D3 6.0 4.1 2.4 D4 6.0 4.1 2.8 D5 6.0 4.1 3.2 Z 7.1 5.0 ❈ Y 7.1 6.3 ❈ ❈Refer to the column “ Rating,Dimensions&Quantity” ■Taping Specification for Automatic Mounting Refer to the page of taping specifications. ■ Rating, Dimensions & Quantity/Reel ●Capacitance tolerance: ±2 % (G), ±5 % (J) Rated volt. 50 VDC Cap.(µF) 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 Rated volt. 100 VDC Dimensions (mm) Part No. L W H Size Code Please use 50 VDC rating of ECHU(X) ECHU1H473MC9 ECHU1H563MC9 ECHU1H683MC9 ECHU1H823MC9 ECHU1H104MC9 ECHU1H124MC9 ECHU1H154MC9 ECHU1H184MC9 ECHU1H224MC9 ▲ 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 1.4 2.0 2.0 2.4 2.8 1.8 2.4 2.8 3.2 E1 E2 E2 E3a E3 D1 D3 D4 D5 3000 2000 3000 2000 Dimensions (mm) Part No. Q'ty ECHU1103MC9 ECHU1123MC9 ECHU1153MC9 ECHU1183MC9 ECHU1223MC9 ECHU1273MC9 ECHU1333MC9 ECHU1393MC9 ECHU1473MC9 ECHU1563MC9 ECHU1683MC9 ECHU1823MC9 ECHU1104MC9 ECHU1124MC9 ECHU1154MCV ECHU1184MCV ECHU1224MCV ▲ L 4.8 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 7.1 7.1 7.1 7.1 7.1 7.1 W 3.3 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 4.1 5.0 5.0 5.0 6.3 6.3 6.3 H 1.4 1.4 2.0 2.0 2.4 2.8 1.8 2.0 2.4 2.8 3.2 2.8 3.0 3.4 3.4 4.0 4.8 Size Code E1 E1 E2 E2 E3a E3 D1 D2 D3 D4 D5 Z Z Z Y Y Y Q'ty 3000 2000 3000 2000 1500 1000 Cap. tol. code ■Recommended for Land Dimensions (mm) Land dimensions Size code E1,E2,E3a,E3 D1,D2,D3,D4,D5 Z Y Flow soldering Reflow soldering A B C A B C 2.6 3.8 6.6 7.8 3.0 3.8 ––– ––– ––– ––– ––– ––– 2.6 3.8 4.5 4.5 6.6 7.8 9.0 9.0 3.0 3.8 4.6 5.7 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Mar. 2006