ECP-U1E223JB5

Plastic Film Capacitors Film Chip Capacitor *Production volume is currently limited. Please cousult with Panasonic about ECPU(B) Type: Stacked dielectric with inner electrode and simple mold-less construction ►Features ■Low ESR ■Max. capacitance values 1.0µF ■Smallest package size in film capacitors 3216/1.0µF ■For reflow soldering ►Recommended Applications ■Noise suppressor ■ Coupling circuit for Audio ►Explanation of Part Numbers 1 2 3 4 E C P U Product code Dielectric & construction 5 6 7 8 Rated voltage 1E 9 10 Cap. Tol. Capacitance J K 25VDC 11 12 B 5 Suffix Suffix +/-5% +/-10% Tape width 5 8mm ►Specification Category temp.range (Including temperature-rise on unit surface) -40 to +105 degree C 25VDC (Derating of rated voltage by 2.5%/degree C more than 85 degree C) 0.0068µF to 1.0µF (E12) +/-5%(J), +/-10%(K) Between terminals : Rated volt. (VDC)X150% , 1min 1.5% max. (20 degree C , 1kHz) 0.0068µF - 0.33µF : 1000MΩ min. (20 degree C , 25VDC , 60s) 0.39µF - 1.0µF : 300MΩ • µFmin. (20 degree C , 25VDC , 60s) Reflow soldering : 260 degree C max. and 90s max. at more than 220 degree C (Temp. at cap. Surface) Rated voltage Capacitance range Capacitance tolerance Withstand voltage Dissipation factor Insulation resistance Soldering conditions ►Dimensions in mm (not to scale) L+/-0.2 W+/-0.2 H+/-0.2 (W+/-0.15)** Element (stacked) Outer electrode e+/-0.3 g (H+/-0.15)** ►Construction e+/-0.3 (e+/-0.25)* (e+/-0.2)** (e+/-0.25)* (e+/-0.2)** Size code L W H K0 1.6 0.8 0.6 0.40 min.0.4 J1 J2 2.0 1.25 0.8 2.0 1.25 1.0 0.45 min.0.6 0.45 min.0.6 H1 H2 H3 3.2 3.2 3.2 0.65 min.1.0 0.65 min.1.0 0.65 min.1.0 1.6 1.6 1.6 0.8 1.0 1.4 e * To be applied only for size code J1 & J2 ** To be applied only for size code K0 ►Taping Specification for Automatic Mounting Refer to the taping specifications. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt safety arises from this product, please inform us immediately for technical consultation without fail. -1- g Plastic Film Capacitors ►Rating , Dimensions & quantity / Reel ■Capacitance tolerance : +/- 5%(J), +/- 10%(K), Cap. (µF) 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 Rated volt. 25VDC Dimensions (mm) Part No. L 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 ECPU1E682( )B5 ECPU1E822( )B5 ECPU1E103( )B5 ECPU1E123( )B5 ECPU1E153( )B5 ECPU1E183( )B5 ECPU1E223( )B5 ECPU1E273( )B5 ECPU1E333( )B5 ECPU1E393( )B5 ECPU1E473( )B5 ECPU1E563( )B5 ECPU1E683( )B5 ECPU1E823( )B5 ECPU1E104( )B5 ECPU1E124( )B5 ECPU1E154( )B5 ECPU1E184( )B5 ECPU1E224( )B5 ECPU1E274( )B5 ECPU1E334( )B5 ECPU1E394( )B5 ECPU1E474( )B5 ECPU1E564( )B5 ECPU1E684( )B5 ECPU1E824( )B5 ECPU1E105( )B5 W 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 H 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 1.0 1.0 1.0 0.8 0.8 0.8 0.8 0.8 1.0 1.0 1.4 1.4 1.4 Size code K0 K0 K0 K0 K0 K0 K0 K0 K0 K0 J1 J1 J1 J1 J2 J2 J2 H1 H1 H1 H1 H1 H2 H2 H3 H3 H3 Q’ty 4000 3000 2000 ►Example for Land Dimensions (mm) Electrode Size code Land C K0 J1,J2 H1,H2,H3 Land dimensions Reflow soldering A B C 0.6 2.0 0.7 0.8 2.4 1.1 1.8 3.6 1.4 A B Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt safety arises from this product, please inform us immediately for technical consultation without fail. -2-