ECQUAAF105TA

Plastic Film Capacitors Metallized Polypropylene Film Capacitor (For Automotive) Type ECQUA　［Class X2］ NEW In accordance with UL/CSA and European safety regulation class X2 Equipped with a safety mechanism Features ● ● ● ● ● ● AEC-Q200 compliant High safety (safety function installed) High humidity resistance (THB test : 85 °C, 85 %, 240 V.AC, 1000 h ) High Thermal shock resistance （-40 ⇔ 85℃，1000 cycles） Flame-retardant plastic case and non-combustible resin RoHS compliant Recommended applications ● Interference suppressors for automotive Explanation of part number 1 2 3 4 5 6 7 E C Q U A A F Product Dielectric & construction 8 Rated 9 10 Capacitance Code T S 11 12 Suffix 1 Suffix 2 Cap. Tol. ±10％(K) ±20％(M) Code 1 A Lead Straight Cut lead Applicable standard ＊It is certified as type ECQUA in the following approval. Approval UL UL60384-14 CSA CAN/CSA E60384-14 Europe EN60384-14 International IEC60384-14 Class Class X2 Class X2 Class X2 Class X2 Certification UL VDE ＊When applying this capacitor to European and American safety standards, please use type designation and rating such as ECQUA, 0.1 μF. ＊Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No. Specifications Category temperature range Rated voltage Rated capacitance Capacitance tolerance Dissipation factor(tan δ) Withstand voltage Insulation resistance(IR) Maximum AC voltage＊＊ −40 °C to +110 °C 275 V.AC 0.10 μF to 4.7 μF ±10 % (K), ±20 % (M) C ≦ 1.0 μF : tan δ ≦ 0.1 % ( 20 °C, 1 kHz ) C > 1.0 μF : tan δ ≦ 0.2 % ( 20 °C, 1 kHz ) Between terminals：633 V.AC, 1183 V.DC, 60 s Between terminals to enclosure：2050 V.AC, 60 s C ≦ 0.33 μF : IR ≧ 15000 MΩ (20 °C, 100 V.DC, 60 s) C > 0.33 μF : IR ≧ 5000 MΩ ∙ μF (20 °C, 100 V.DC, 60 s) C ≦ 0.47 μF : IR ≧ 2000 MΩ (20 °C, 500 V.DC, 60 s) 310 V.AC ＊Use of this capacitor is limited to AC voltage (50 Hz or 60 Hz sine wave). ＊A faint corona discharge may occur inside of the capacitor element at rated voltage, however there is no influence on the reliability of the capacitor. ＊＊Maximum AC voltage including line voltage fluctuation is 310 V.AC. 　310 V.AC is not nominal continuous applied voltage, but only indicates maximum value including in the voltage ofthe power supply. 　Basic nominal voltage is considered as 240 V.AC. 　This maximum AC voltae is specified in only ECQUA type, not specified in other types. 　Please refer to individual product specification, and contact us for further questions regarding design life. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2018/8/2 Plastic Film Capacitors Dimensions L±0.5 T±0.5 Cut lead Marking Example H±0.5 （Suffix A) 4.0±0.5 20 min. F±0.4 (A) side Φd±0.05 Solder-plated copper wire or Solder-plated copper-clad steel wire （C） Q+1.4 -0.6 (B) or（C)side ECQUA104 275V ~ X2 （A） K （B） Note : Only ±10 ％ as cap. tol. be marked as “K”． P(Lead location limits from center) Unit：㎜ Note:　　　　 Date code. Rating · Dimensions · Quantity Part No. ECQUAAF104T( ECQUAAF104S( ECQUAAF154T( ECQUAAF154S( ECQUAAF224T( ECQUAAF224S( ECQUAAF334T( ECQUAAF334S( ECQUAAF474T( ECQUAAF474S( ECQUAAF684T( ECQUAAF684S( ECQUAAF105T( ECQUAAF105S( ECQUAAF155T( ECQUAAF155S( ECQUAAF225T( ECQUAAF225S( ECQUAAF335T( ECQUAAF335S( ECQUAAF475T( ECQUAAF475S( ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) ) Capacitanc e L T 0.10 17.5 5.0 12.0 15.0 0.15 17.5 6.0 0.22 17.5 0.33 Dimensions（㎜） H F Φd Min. order Q'ty Straight Cut lead P Q 0.6 0±0.8 1.3 13.0 15.0 0.6 0±0.8 1.3 7.5 14.0 15.0 0.6 0±0.8 1.3 17.5 9.0 16.0 15.0 0.6 0±0.8 1.3 0.47 26.0 8.5 15.0 22.5 0.8 0±0.8 1.8 600 0.68 26.0 10.0 17.0 22.5 0.8 0±0.8 1.8 500 500 1.0 26.0 12.0 19.0 22.5 0.8 0±0.8 1.8 300 300 1.5 31.0 12.0 22.0 27.5 0.8 0±0.8 1.8 2.2 31.0 14.5 24.5 27.5 0.8 0±0.8 1.8 200 200 3.3 31.0 19.0 29.0 27.5 0.8 0±0.8 1.8 150 150 4.7 31.0 23.0 33.0 27.5 0.8 0±0.8 1.8 100 100 1000 1000 800 ＊ ( ) : Suffix for lead form Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 2018/8/24