ECWFE2W155PL

Plastic Film Capacitors Metallized Polypropylene Film Capacitor Series： ECWFE　 UP GRADE Non-inductive construction using metalized Polypropylene film with flame retardant plastic case. Features ● ● ● ● ● ● Small size Excellent frequency characteristics Low loss Flame retardant plastic case and non-combustible resin Low hum sound noise RoHS compliant Recommended applications ● Active filter circuit ● High frequency circuit Explanation of part number ● Standard 1 2 3 4 5 E C W F E Product code Dielectric & construction 6 7 8 Rated voltage 9 10 11 Capacitance 2W 450 V.DC 2J 630 V.DC J K 12 Cap. Tol. Suffix ±5 ％ ±10 ％ Code Blank A Lead form Straight Cut lead ● Special lead space product 1 2 3 4 5 E C W F E Product code Dielectric & construction 6 7 Rated voltage 2W 450 V.DC 2J 630 V.DC 8 9 10 Capacitance P Q 11 12 Cap. Tol. Suffix ±5 ％ ±10 ％ Code 1,５,8 A,D,L Lead form Straight Cut lead Specifications Category temp. range −40 °C to +105 °C (Including temperature-rise on unit surface) 450 V.DC Rated voltage 630 V.DC Capacitance range Capacitance tolerance Dissipation factor (tan δ) Withstand voltage Insulation resistance (IR) 450 V.DC 630 V.DC Peak to peak voltage applied on the capacitor should be less than 240 Vp-p, and zero to peak voltage should be less than 450 Vo-p. (Derating of rated voltage by 1.25 %/°C at more than 85 °C) Peak to peak voltage applied on the capacitor should be less than 400 Vp-p, and zero to peak voltage should be less than 630 Vo-p. (Derating of rated voltage by 1.0%/°C at more than 85 °C) Between 　C ≦ 450 V.DC 　C > 　C ≦ 630 V.DC 　C > 0.1 μF to 4.7 μF 0.1 μF to 2.2 μF ±5% (J), ±10 % (K) tan δ ≦ 0.1 % (20 °C, 1 kHz) terminals : Rated voltage (V.DC)×150 % 60 s 0.33 μF：IR ≧ 30,000 MΩ (20 °C, 100 V.DC, 60 s) 0.33 μF：IR ≧ 10,000 MΩ・μF 0.33 μF：IR ≧ 9,000 MΩ (20 °C, 500 V.DC, 60 s) 0.33 μF：IR ≧ 3,000 MΩ・μF ✽ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Mar-19 Plastic Film Capacitors Dimensions L±0.5 T±0.5 Cut lead Marking example H±0.5 (Suffix A,D,L） WFE2W 105J 4.0±0.5 20 min. F±0.4 Marking Φd±0.05 Date code. Q +1.4 -0.6 Tin-plated copper-clad steel wire P(Lead location limits from center) Unit:ｍｍ Rating · Dimensions ● Rated voltage : 450 V.DC, Capacitance tolerance : ±5 %(J), ± 10 %(K) Part No. ECWFE2W104□( ) NEW NEW ECWFE2W104P( ) ECWFE2W104Q( ) ECWFE2W154□( ) NEW NEW ECWFE2W154P( ) ECWFE2W154Q( ) ECWFE2W224□( ) NEW NEW ECWFE2W224P( ) ECWFE2W224Q( ) ECWFE2W334□( ) NEW NEW NEW NEW NEW Q 1.5 0.10 17.5 5.0 10.5 15.0 0.6 0±0.8 1.25 0.15 13.0 5.0 10.5 10.0 0.6 0±0.8 1.5 0.15 17.5 5.0 10.5 15.0 0.6 0±0.8 1.25 0.22 13.0 6.0 12.0 10.0 0.6 0±0.8 1.5 0.22 17.5 5.0 10.5 15.0 0.6 0±0.8 1.25 Min. order q'ty Straight Cut lead 1000 1000 10.0 0.6 0±0.8 1.5 0.33 17.5 5.0 10.5 15.0 0.6 0±0.8 1.25 0.47 13.0 7.0 12.5 10.0 0.6 0±0.8 1.5 ECWFE2W474□( ) 0.47 17.5 6.0 11.5 15.0 0.8 0±0.8 1.3 ECWFE2W684□( ) 0.68 17.5 7.0 12.5 15.0 0.8 0±0.8 1.3 ECWFE2W105□( ) 1.0 17.5 7.0 12.5 15.0 0.8 0±0.8 1.3 ECWFE2W155□( ) 1.5 17.5 10.0 15.5 15.0 0.8 0±0.8 1.3 1.5 31.0 9.0 19.0 27.5 0.8 0±0.8 1.75 400 300 2.2 17.5 10.0 15.5 15.0 0.8 0±0.8 1.3 1000 600 2.2 31.0 11.0 21.0 27.5 0.8 0±0.8 1.75 200 200 3.3 26.0 10.0 17.0 22.5 0.8 0±0.8 1.8 500 300 3.3 31.0 13.0 23.0 27.5 0.8 0±0.8 1.75 200 200 4.7 26.0 12.0 19.0 22.5 0.8 0±0.8 1.8 300 200 4.7 31.0 15.5 25.5 27.5 0.8 0±0.8 1.75 150 100 ECWFE2W334Q( ) ECWFE2W155P( ) ECWFE2W155Q( ) ECWFE2W225P( ) ECWFE2W225Q( ) ECWFE2W335P( ) ECWFE2W335Q( ) ECWFE2W475□( ) NEW P 0±0.8 12.0 ECWFE2W335□( ) NEW Dimensions（ｍｍ） H F Φd 10.5 10.0 0.6 6.0 ECWFE2W225□( ) NEW T 5.0 13.0 ECWFE2W474Q( ) NEW L 13.0 0.33 ECWFE2W334P( ) ECWFE2W474P( ) NEW Cap. （μF） 0.10 ECWFE2W475P( ) ECWFE2W475Q( ) ＊□：Capacitance tolerance code ＊( )：Suffix for lead crimped 600 Note）Part number marked with bold is special lead space product. The capacitance of 0.10 μF, 0.15 μF, 0.22 μF, 0.33 μF, 3.3 μF, 4.7 μF are "5" or "D" The capacitance of 0.47 μF is "1" or "A” The capacitance of 1.5 μF, 2.2 μF are "8" or "L” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Mar-19 Plastic Film Capacitors Rating · Dimensions ● Rated voltage : 630 V.DC, Capacitance tolerance : ±5 %(J), ± 10 %(K) Cap. （μF） 0.10 L 17.5 T 5.0 Dimensions（ｍｍ） H F Φd 10.5 15.0 0.6 P 0±0.8 Q 1.3 0.10 26.0 6.0 13.0 22.5 0.8 0±0.8 1.75 900 700 0.15 17.5 6.0 11.5 15.0 0.6 0±0.8 1.3 1000 1000 0.15 26.0 6.0 13.0 22.5 0.8 0±0.8 1.75 900 700 0.22 17.5 7.0 12.5 15.0 0.6 0±0.8 1.3 1000 1000 0.22 26.0 6.0 13.0 22.5 0.8 0±0.8 1.75 900 700 0.33 17.5 8.5 14.5 15.0 0.6 0±0.8 1.3 1000 800 0.33 26.0 7.0 14.0 22.5 0.8 0±0.8 1.75 700 500 0.47 17.5 10.0 15.5 15.0 0.6 0±0.8 1.3 1000 600 0.47 26.0 8.0 15.0 22.5 0.8 0±0.8 1.75 600 400 ECWFE2J684□( ) 0.68 17.5 11.0 17.5 15.0 0.6 0±0.8 1.3 600 600 ECWFE2J105□( ) 1.0 26.0 10.0 17.0 22.5 0.8 0±0.8 1.8 500 300 ECWFE2J155□( ) 1.5 26.0 12.0 19.0 22.5 0.8 0±0.8 1.8 300 ECWFE2J225□( ) 2.2 26.0 16.0 23.0 22.5 0.8 0±0.8 1.8 200 Part No. ECWFE2J104□( ) NEW NEW ECWFE2J104P( ) ECWFE2J104Q( ) ECWFE2J154□( ) NEW NEW ECWFE2J154P( ) ECWFE2J154Q( ) ECWFE2J224□( ) NEW NEW ECWFE2J224P( ) ECWFE2J224Q( ) ECWFE2J334□( ) NEW NEW ECWFE2J334P( ) ECWFE2J334Q( ) ECWFE2J474□( ) NEW NEW ECWFE2J474P( ) ECWFE2J474Q( ) ＊□：Capacitance tolerance code ＊( )：Suffix for lead crimped Min. order q'ty Straight Cut lead 1000 1000 200 Note）Part Number marked with bold is Special Lead space product. The capacitance of 0.10 μF, 0.15 μF, 0.22 μF, 0.33 μF, 0.47 μF are "5" or "D" Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 13-Mar-19