EEC-RF0H104A

Electric Double Layer Capacitors (Gold Capacitor) Stacked Coin Type Series : Not recommended for new design RF Features ● Endurance : +85 °C 2000 h be discharged mA current ● RoHS compliant ● Can Recommended applications ● Backup ● For of data/RTC of base station, electronic meter, and industrial equipment assist of rapid load change Specifications Category temp. range Maximum operating voltage Nominal capacitance Characteristics at low temperature Endurance Shelf life –25 °C to +85 °C 5.5 V.DC 0.1 F 0.68 F, 1.0 F Capacitance change ±30 % of initial measured value at +20 °C (at –25 °C) Internal resistance < 5 times of initial measured value at +20 °C (at –25 °C) After 2000 hours application of maximum operating voltage at +85 °C Capacitance change ±30 % of initial measured value at 20 °C 150 Ω or less (0.1 F) Internal resistance 40 Ω or less (0.68 F, 1.0 F) After 2000 hours storage at +85 °C without load (voltage) Capacitance change Capacitance change shall meet the specified limits for Endurance Internal resistance Internal resistance shall meet the specified limits for Endurance Dimensions in mm(not to scale) 5.0±0.3 1.2±0.1 0.8±0.1 – 9.5 max. 6±1 + Cap (F) 5.0 6±1 3.5±0.5 2.5±0.5 0.5±0.1 + fD – Sleeve 0D (mm) 0.1 13.5 max 0.68, 1.0 21.5 max 01.1±0.05 (Recommended) (Unit : mm) Characteristics list Maximum operating voltage (V.DC) Capacitance (F) 0.1 0.080 to 0.180 < 75 3 or less EECRF0H104 3.3 Min. packaging q'ty (pcs) 200 5.5 0.68 0.544 to 1.224 < 20 20 or less EECRF0H684 10.0 100 1.0 0.8 to 1.8 < 20 20 or less EECRF0H105 10.0 100 Capacitance Internal resistance Recommended tolerance (Initial specified value) discharge current (F) (Ω) at 1 kHz (mA) Parts number Mass (Reference value) (g) Do not use reflow soldering. (IR, Atmospherheating methods, etc.) Please refer to the page of “Application guidelines”. The recommended discharge current is a reference value. Please design your equipment(circuit) in consideration of IR dorop. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jan. 2016