EEE-FK1A242SV

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : Medium-size FKS Type : V High temperature Lead-Free reflow Features ● Endurance : 105 °C 5000 h ● High capacitance : 20 to 80 % higher than FK series, ● Vibration-proof product is available upon request. ● RoHS compliant large capacitance up to 13000 μF Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –55 °C to +105 °C 6.3 V.DC to 35 V.DC 750 μF to 13000 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV (μA) After 2 minutes Please see the attached characteristics list V.DC 6.3 10 16 25 35 Z(–25 °C)/Z(+20 °C) 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 3 3 3 3 3 Z(–55 °C)/Z(+20 °C) 4 4 4 3 3 After applying rated working voltage for 5000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value < 300 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) Capacitance change Within ±30 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Correction factor 120 0.75 10 k 0.95 Capacitance (μF) 3500 j FK Series identification Mark for Lead-Free products (Black dot) K (P) + L Pressure Relief (I) Negative polarity marking (–) A±0.2 – H 0D±0.5 0.3 max. (I) Dimensions Example : 6.3 V.DC 3500 μF Marking color : BLACK W ( ) Reference (Unit : mm) Rated voltage code Size 0D code Lot number R. Voltage (V.DC) Code 100 k to 1.00 B±0.2 Marking 1k 0.90 6.3 10 16 25 35 j A C E V H13 J16 K16 K21 12.5 16.0 18.0 18.0 L A, B H I W P K 13.5±0.5 16.5±0.5 16.5±0.5 21.5±0.5 13.5 17.0 19.0 19.0 15.0 max. 19.0 max. 21.0 max. 21.0 max. 4.7 5.5 6.7 6.7 0.90±0.3 1.20±0.3 1.20±0.3 1.20±0.3 4.4 6.7 6.7 6.7 0.70±0.30 0.70±0.30 0.70±0.30 0.70±0.30 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 May. 2017 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 5000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (μF) 6.3 10 16 25 3500 12.5 13.5 7500 16 16.5 J16 1800 0.035 10000 18 16.5 K16 2060 13000 18 21.5 K21 2640 0D L Min. Packaging Q'ty Part No. Ripple Impedance tan d current Standard (100 kHz) (120 Hz) (100 kHz) (+20 °C) Product (+20 °C) (+105 °C) (Ω) (mA r.m.s.) H13 1100 0.06 0.30 EEEFK0J352SQ Size code Vibration-proof Product Reflow Taping (pcs) EEEFK0J352SV (9) 200 0.38 EEEFK0J752SM EEEFK0J752SV (9) 125 0.033 0.42 EEEFK0J103SM EEEFK0J103SV (9) 125 0.025 0.50 EEEFK0J133SM EEEFK0J133SV (9) 75 2400 12.5 13.5 H13 1100 0.06 0.21 EEEFK1A242SQ EEEFK1A242SV (9) 200 5600 16 16.5 J16 1800 0.035 0.27 EEEFK1A562SM EEEFK1A562SV (9) 125 7500 18 16.5 K16 2060 0.033 0.31 EEEFK1A752SM EEEFK1A752SV (9) 125 9100 18 21.5 K21 2640 0.025 0.35 EEEFK1A912SM EEEFK1A912SV (9) 75 1800 12.5 13.5 H13 1100 0.06 0.16 EEEFK1C182SQ EEEFK1C182SV (9) 200 4300 16 16.5 J16 1800 0.035 0.22 EEEFK1C432SM EEEFK1C432SV (9) 125 5600 18 16.5 K16 2060 0.033 0.24 EEEFK1C562SM EEEFK1C562SV (9) 125 7500 18 21.5 K21 2640 0.025 0.28 EEEFK1C752SM EEEFK1C752SV (9) 75 1200 12.5 13.5 H13 1100 0.06 0.14 EEEFK1E122SQ EEEFK1E122SV (9) 200 2700 16 16.5 J16 1800 0.035 0.16 EEEFK1E272SM EEEFK1E272SV (9) 125 3600 18 16.5 K16 2060 0.033 0.18 EEEFK1E362SM EEEFK1E362SV (9) 125 4700 18 21.5 K21 2640 0.025 0.20 EEEFK1E472SM EEEFK1E472SV (9) 75 12.5 13.5 H13 1100 0.06 0.12 EEEFK1V751SQ EEEFK1V751SV (9) 200 1600 16 16.5 J16 1800 0.035 0.14 EEEFK1V162SM EEEFK1V162SV (9) 125 2200 18 16.5 K16 2060 0.033 0.14 EEEFK1V222SM EEEFK1V222SV (9) 125 3000 18 21.5 K21 2640 0.025 0.16 EEEFK1V302SM EEEFK1V302SV (9) 75 750 35 Specification · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 00 May. 2017