EEE-FK1C101SR

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FKS Type : V High temperature Lead-Free reflow Features ● Endurance : 105 °C 2000 h size smaller than series FK ● Vibration-proof product is available upon request. (08 mm and larger) ● RoHS compliant ●1 Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 –55 °C to +105 °C 6.3 V.DC to 50 V.DC 10 µF to 1800 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 50 Z(–25 °C)/Z(+20 °C) 2 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 3 3 3 3 3 3 Z(–55 °C)/Z(+20 °C) 4 4 4 3 3 3 After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value (6.3 V.DC of B, C size : Within ±40 %) < 200 % of the initial limit tan d DC leakege current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) 120 1k 10 k 100 k to Correction factor 0.65 0.85 0.95 1.00 Capacitance (µF) 270 j KS W Pressure Relief (010 and larger) ( ) Reference size (Unit : mm) Rated voltage code Lot number R. Voltage 6.3 (V.DC) Code j + L Series identification A±0.2 (P) Negative polarity marking (–) – H 0D±0.5 0.3 max. (I) Example : 6.3 V.DC 270 µF Marking color : BLACK K (I) Dimensions B±0.2 Marking 10 16 25 35 50 A C E V H Size code 0D B 4.0 C 5.0 D 6.3 D8 6.3 F 8.0 G 10.0 L A, B H. 5.8±0.3 4.3 5.5 max 5.8±0.3 5.3 6.5 max 5.8±0.3 6.6 7.8 max 7.7±0.3 6.6 7.8 max 10.2±0.3 8.3 10.0 max 10.2±0.3 10.3 12.0 max I W P K 1.8 2.2 2.6 2.6 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 1.8 3.1 4.6 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.35 +0.15 -0.20 0.70±0.20 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2017 NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW NEW