EEE-FKJ331XAP

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FK Type : V High temperature Lead-Free reflow (suffix : A✽) Features ● Endurance : 105 °C 2000 h ● Low impedance (40 % to 60 % less than FC series) Miniaturized (30 % to 50 % less than FC series) ● Vibration-proof product is available upon request. (08 mm and larger) ● RoHS compliant Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) –55 °C to +105 °C 6.3 V.DC to 35 V.DC 4.7 µF to 1500 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (µA) After 2 minutes (Whichever is greater) Please see the attached characteristics list V.DC 6.3 10 16 25 35 Z(–25 °C)/Z(+20 °C) 2 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 3 3 3 3 3 Z(–55 °C)/Z(+20 °C) 4 4 4 3 3 After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change Within ±30 % of the initial value < 200 % of the initial limit tan d DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Characteristics at low temperature Endurance Shelf life Resistance to soldering heat AEC-Q200 Frequency correction factor for ripple current Frequency (Hz) Capacitance (µF) 4.7 to 680 to 470 1500 120 1k 10 k 100 k to 0.65 0.70 0.85 0.90 0.95 0.95 1.00 1.00 0.3 max. 22 j FK L Pressure Relief (010 and larger) Series identification Mark for Lead-Free products (Black dot) Rated voltage code Lot number R. Voltage (V.DC) Code 6.3 10 16 25 35 j A C E V Size code B C D D8 E F G 0D L A, B 4.0 5.8±0.3 4.3 5.0 5.8±0.3 5.3 6.3 5.8±0.3 6.6 6.3 7.7±0.3 6.6 8.0 6.2±0.3 8.3 8.0 10.2±0.3 8.3 10.0 10.2±0.3 10.3 (P) + (I) Capacitance (µF) A±0.2 B±0.2 Negative polarity marking (–) – H 0D±0.5 Example : 6.3 V.DC 22 µF Marking color : BLACK (I) Dimensions K Marking W ( ) Reference size (Unit : mm) H I W 5.5 max. 6.5 max. 7.8 max. 7.8 max. 9.5 max. 10.0 max. 12.0 max. 1.8 2.2 2.6 2.6 3.4 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P K 1.0 0.35 +- 0.15 0.20 1.5 0.35 +- 0.15 0.20 + 0.15 1.8 0.35 - 0.20 1.8 0.35 +- 0.15 0.20 2.2 0.35 +- 0.15 0.20 3.1 0.70±0.20 4.6 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016 Aluminum Electrolytic Capacitors (SMD Type) Characteristics list Endurance : 105 °C 2000 h Specification Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 22 47 100 6.3 220 330 470 1000 1500 22 33 150 10 220 330 470 680 1000 10 22 47 16 68 100 150 220 330 470 680 10 22 33 25 47 68 100 150 220 330 470 4.7 10 35 22 33 47 68 100 150 220 330 ✽ 0D L Size code 4 4 5 5 6.3 6.3 6.3 8 8 8 10 4 4 5 6.3 6.3 8 8 8 8 10 4 4 5 5 6.3 6.3 6.3 6.3 6.3 8 8 8 10 4 5 5 6.3 6.3 6.3 6.3 8 8 8 8 10 4 4 5 5 6.3 6.3 6.3 6.3 8 8 8 10 5.8 5.8 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 5.8 7.7 7.7 6.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 7.7 6.2 10.2 10.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 7.7 7.7 10.2 10.2 10.2 10.2 B (B) C (C) D D D8 E F F G B (B) C D D8 E F F F G B (B) C (C) D D D D8 D8 E F F G B C (C) D D D D8 E F F F G B (B) C C D D D8 D8 F F F G Ripple Impedance tan d current Part No. (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 90 1.35 0.26 EEEFK0J220AR 90 1.35 0.26 EEEFKJ470UAR 160 0.70 0.26 EEEFK0J470AR 160 0.70 0.26 EEEFKJ101UAR 240 0.36 0.26 EEEFK0J101AP 240 0.36 0.26 EEEFK0J221AP 280 0.34 0.26 EEEFKJ331XAP 300 0.26 0.26 EEEFK0J331AP 600 0.16 0.26 EEEFK0J471AP 600 0.16 0.26 EEEFK0J102AP 850 0.08 0.26 EEEFK0J152AP 90 1.35 0.19 EEEFK1A220AR 90 1.35 0.19 EEEFKA330UAR 160 0.70 0.19 EEEFK1A330AR 240 0.36 0.19 EEEFK1A151AP 280 0.34 0.19 EEEFKA221XAP 300 0.26 0.19 EEEFK1A221AP 600 0.16 0.19 EEEFK1A331AP 600 0.16 0.19 EEEFK1A471AP 600 0.16 0.19 EEEFK1A681AP 850 0.08 0.19 EEEFK1A102AP 90 1.35 0.16 EEEFK1C100AR 90 1.35 0.16 EEEFKC220UAR 160 0.70 0.16 EEEFK1C220AR 160 0.70 0.16 EEEFKC470UAR 240 0.36 0.16 EEEFK1C470AP 240 0.36 0.16 EEEFK1C680AP 240 0.36 0.16 EEEFK1C101AP 280 0.34 0.16 EEEFKC151XAP 280 0.34 0.16 EEEFKC221XAP 300 0.26 0.16 EEEFK1C221AP 600 0.16 0.16 EEEFK1C331AP 600 0.16 0.16 EEEFK1C471AP 850 0.08 0.16 EEEFK1C681AP 90 1.35 0.14 EEEFK1E100AR 160 0.70 0.14 EEEFK1E220AR 160 0.70 0.14 EEEFKE330UAR 240 0.36 0.14 EEEFK1E330AP 240 0.36 0.14 EEEFK1E470AP 240 0.36 0.14 EEEFK1E680AP 280 0.34 0.14 EEEFKE101XAP 300 0.26 0.14 EEEFK1E101AP 600 0.16 0.14 EEEFK1E151AP 600 0.16 0.14 EEEFK1E221AP 600 0.16 0.14 EEEFK1E331AP 850 0.08 0.14 EEEFK1E471AP 90 1.35 0.12 EEEFK1V4R7AR 90 1.35 0.12 EEEFKV100UAR 160 0.70 0.12 EEEFK1V100AR 160 0.70 0.12 EEEFK1V220AR 240 0.36 0.12 EEEFK1V330AP 240 0.36 0.12 EEEFK1V470AP 280 0.34 0.12 EEEFKV680XAP 280 0.34 0.12 EEEFKV101XAP 600 0.16 0.12 EEEFK1V101AP 600 0.16 0.12 EEEFK1V151AP 600 0.16 0.12 EEEFK1V221AP 850 0.08 0.12 EEEFK1V331AP Min. Packaging Q'ty Reflow Taping (pcs) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (5) (5) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) (6) (5) (5) (5) (5) (5) (5) (5) (5) (6) (6) (6) (6) 2000 2000 1000 1000 1000 1000 900 1000 500 500 500 2000 2000 1000 1000 900 1000 500 500 500 500 2000 2000 1000 1000 1000 1000 1000 900 900 1000 500 500 500 2000 1000 1000 1000 1000 1000 900 1000 500 500 500 500 2000 2000 1000 1000 1000 1000 900 900 500 500 500 500 ✽ Size code( ) : Miniaturization product If Part number exceeds 12 digits, voltage code is abbreviated as follows; 0J → J, 1A → A, 1C → C, 1E → E, 1V → V · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 04 Mar. 2016