EEE-FT1V101AP

Aluminum Electrolytic Capacitors (SMD Type) Surface Mount Type Series : FT Type : V High temperature Lead-Free reflow Features ● Endurance : 105 °C 2000 h to 5000 h Low ESR (1 size smaller than series FK) ● Vibration-proof product is available upon request. (08 mm and larger) ● RoHS compliant ● Miniaturized, Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance Leakage current Dissipation factor (tan d) Endurance Shelf life Resistance to soldering heat AEC-Q200 –55 °C to +105 °C 6.3 V.DC to 50 V.DC 10 μF to 2200 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV (μA) After 2 minutes Please see the attached characteristics list After applying rated working voltage for 2000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. (Suffix “G” in 6.3 V.DC : 3000 hours, 10 V.DC to 50 V.DC : 5000 hours) Capacitance change Within ±30 % of the initial value (Suffix “G” is ±35 %) tan d < 200 % of the initial limit (Suffix “G” is < 300 %) DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change Within ±10 % of the initial value tan d Within the initial limit DC leakage current Within the initial limit AEC-Q200 compliant Frequency correction factor for ripple current Frequency (Hz) Capacitance (μF) 10 to 560 to 470 2200 120 1k 10 k 100 k to 0.65 0.70 0.85 0.90 0.95 0.95 1.00 1.00 22 E FT Capacitance (μF) L Series identification K A±0.2 (P) + W Pressure Relief (010 and larger) ( ) Reference size (Unit : mm) Rated voltage code Lot number R. Voltage 6.3 (V.DC) Code j H 0D±0.5 Negative polarity marking (–) – (I) 0.3 max. Example : 25 V.DC 22 μF Marking color : BLACK (I) Dimensions B±0.2 Marking 10 16 25 35 50 A C E V H Size H L A, B 0D code B 4.0 5.8±0.3 4.3 5.5 max. C 5.0 5.8±0.3 5.3 6.5 max. D 6.3 5.8±0.3 6.6 7.8 max. D8 6.3 7.7±0.3 6.6 7.8 max. F 8.0 10.2±0.3 8.3 10.0 max. G 10.0 10.2±0.3 10.3 12.0 max. I W P K 1.8 2.2 2.6 2.6 3.4 3.5 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 1.0 1.5 1.8 1.8 3.1 4.6 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.70±0.20 0.70±0.20 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Apr. 2017 NEW NEW NEW NEW NEW NEW Aluminum Electrolytic Capacitors (SMD Type) Characteristics list (Endurance 5000 h) Endurance : 105 °C 5000 h (6.3 V.DC : 105 °C 3000 h) Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (μF) 6.3 10 16 25 35 50 1500 2200 1000 1500 680 1000 470 820 330 560 220 330 Min. Packaging Q'ty Specification 0D L Size code 8 10 8 10 8 10 8 10 8 10 8 10 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 10.2 F G F G F G F G F G F G Ripple ESR tan d current (100 kHz) (120 Hz) (100 kHz) (+20 °C) (+20 °C) (+105 °C) (Ω) (mA r.m.s.) 850 0.08 0.26 1190 0.06 0.28 850 0.08 0.19 1190 0.06 0.19 850 0.08 0.16 1190 0.06 0.16 850 0.08 0.14 1190 0.06 0.14 850 0.08 0.12 1190 0.06 0.12 670 0.18 0.10 900 0.12 0.10 Part No. Reflow Taping (pcs) EEEFT0J152GP EEEFT0J222GP EEEFT1A102GP EEEFT1A152GP EEEFT1C681GP EEEFT1C102GP EEEFT1E471GP EEEFT1E821GP EEEFT1V331GP EEEFT1V561GP EEEFT1H221GP EEEFT1H331GP (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) (6) 500 500 500 500 500 500 500 500 500 500 500 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Apr. 2017