EEEHB1HR33R

Aluminum Electrolytic Capacitors/ HB Long life Surface Mount Type Series: HB Type: ↑ Low profile HA ■ Features ● ● ● ● ● 5.5 mm max. HB V Endurance: 105 °C 2000 h 5.8 mm height (< 06.3), 5.5 mm height max. Vibration-proof product is available upon request. (08 mm and larger) AEC-Q200 qualified ✽ RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan d Characteristics at Low Temperature Endurance Shelf Life Resistance to Soldering Heat –40 °C to +105 °C 4 V.DC to 50 V.DC 1 μF to 470 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (Bi-polar I < 0.02 CV or 6 (μA) after 2 minutes) (Whichever is greater) Please see the attached standard products list W.V. (V) 4 6.3 10 16 25 35 50 Z(–25 °C)/Z(+20 °C) 7 4 3 2 2 2 2 (Impedance ratio at 120 Hz) Z(–40 °C)/Z(+20 °C) 15 8 6 4 4 3 3 After applying rated working voltage for 2000 hours (Bi-polar : 1000 hours for each polarity) at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Capacitance change ±20 % of inisial measured value (4 W.V. : ±35 % 6.3 W.V. : ±25 % 04 to 06.3), 5.5 mm max. : ±25 % tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After reflow soldering and then being stabilized at +20°C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan d < initial specified value DC leakage current < initial specified value ■ Frequency correction factor for ripple current Frequency (Hz) 50, 60 0.70 Correction factor 10 k to 1.70 ■ Dimensions in mm (not to scale)  H )# Series identification (HP : Bi-polar) (BS : 5.5 mm max.) Mark for Lead-Free Products Black Dot (Square) Lot number Rated Voltage Mark Rated Voltage Mark 4V 6.3 V 10 V 16 V E V H 25 V 35 V 50 V W Pressure Relief (010 and larger) Size D code B 4.0 C 5.0 D 6.3 E 8.0 F 8.0 G 10.0 L 5.8±0.3 5.8±0.3 5.8±0.3 6.2±0.3 10.2±0.3 10.2±0.3 ● 5.5 mm height max. Size D L code 5.4+- 0.1 B 4.0 0.2 C 5.0 5.4+- 0.1 0.2 D 6.3 5.4+- 0.1 0.2 A, B (I) (P) + L Capacitance (μF) A±0.2 B±0.2 Negative polarity marking (–) (No marking for the bi-polar) – H 0D±0.5 0.3 max. (Unit : mm) (I) Example:4 V 47 μF Marking color: BLACK g j A C 1k 1.30 K ■ Marking 120 1.00 ( ) Reference size H 4.3 5.5 max. 5.3 6.5 max. 6.6 7.8 max. 8.3 9.5 max. 8.3 10.0 max. 10.3 12.0 max. I 1.8 2.2 2.6 3.4 3.4 3.5 W 0.65±0.1 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P 1.0 1.5 1.8 2.2 3.1 4.6 A, B H I W P 4.3 5.3 6.6 5.5 max. 6.5 max. 7.8 max. 1.8 2.2 2.6 0.65±0.1 0.65±0.1 0.65±0.1 1.0 1.5 1.8 K + 0.15 - 0.20 0.35 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.70±0.20 0.70±0.20 K 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 0.35 +- 0.15 0.20 ✽ This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2013 – EEE-24 – Aluminum Electrolytic Capacitors/ HB ■ Standard Products Endurance : 105 °C 2000 h Case size W.V. (V) 4 6.3 10 16 25 35 50 Cap. (±20 %) (μF) 47 100 150 220 22 33 47 100 220 330 33 100 220 470 10 22 47 100 220 330 4.7 6.8 33 47 100 220 10 22 33 47 100 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 6.8 10 22 33 47 Dia. Length (mm) 4 5 6.3 6.3 4 4 5 6.3 8 8 5 8 8 10 4 5 6.3 8 10 10 4 4 6.3 8 8 10 5 6.3 8 8 10 4 4 4 4 4 4 4 5 5 6.3 8 8 10 (mm) 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 10.2 10.2 5.8 6.2 10.2 10.2 5.8 5.8 5.8 10.2 10.2 10.2 5.8 5.8 5.8 6.2 10.2 10.2 5.8 5.8 6.2 10.2 10.2 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 6.2 10.2 10.2 Min. Packaging Q'ty Specification Size Code B C D D B B C D F F C E F G B C D F G G B B D E F G C D E F G B B B B B B B C C D E F G Ripple tan d Current (120 Hz) (120 Hz) (+105 °C) (+20 °C) (mA r.m.s.) 34 0.50 61 0.50 82 0.50 82 0.50 26 0.30 29 0.30 46 0.30 71 0.30 150 0.35 230 0.35 43 0.22 110 0.26 160 0.26 270 0.26 28 0.16 39 0.16 70 0.16 120 0.20 210 0.20 230 0.20 22 0.14 25 0.14 65 0.14 91 0.16 130 0.16 190 0.16 28 0.12 55 0.12 84 0.14 98 0.14 160 0.14 1 0.12 2 0.12 3 0.12 5 0.12 10 0.12 16 0.12 16 0.12 23 0.12 23 0.12 35 0.12 70 0.12 91 0.12 100 0.12 Part No. (RoHS:compliant) Reflow EEEHB0G470R EEEHB0G101R EEEHB0G151P EEEHB0G221P EEEHB0J220R EEEHB0J330R EEEHB0J470R EEEHB0J101P EEEHB0J221P EEEHB0J331P EEEHB1A330R EEEHB1A101P EEEHB1A221P EEEHB1A471P EEEHB1C100R EEEHB1C220R EEEHB1C470P EEEHB1C101P EEEHB1C221P EEEHB1C331P EEEHB1E4R7R EEEHB1E6R8R EEEHB1E330P EEEHB1E470P EEEHB1E101P EEEHB1E221P EEEHB1V100R EEEHB1V220P EEEHB1V330P EEEHB1V470P EEEHB1V101P EEEHB1HR10R ✽✽✽ EEEHB1HR22R ✽✽✽ EEEHB1HR33R ✽✽✽ EEEHB1HR47R ✽✽✽ EEEHB1H1R0R EEEHB1H2R2R EEEHB1H3R3R EEEHB1H4R7R EEEHB1H6R8R EEEHB1H100P EEEHB1H220P EEEHB1H330P EEEHB1H470P (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (1) (2) (2) (2) (1) (1) (1) (2) (2) (2) (1) (1) (1) (2) (2) (2) (1) (1) (2) (2) (2) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) Taping (pcs) 2000 1000 1000 1000 2000 2000 1000 1000 500 500 1000 1000 500 500 2000 1000 1000 500 500 500 2000 2000 1000 1000 500 500 1000 1000 1000 500 500 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 500 500 ✽✽✽ Please kindly accept last shipment : 31/Mar/2015 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2013 – EEE-25 – Aluminum Electrolytic Capacitors/ HB ■ Standard Products (Bi-polar) Endurance : 105 °C 2000 h Case size W.V. (V) 6.3 10 16 25 35 50 Cap. (±20 %) (μF) 47 10 33 10 3.3 4.7 10 22 2.2 0.22 0.33 0.47 1 3.3 4.7 Dia. Length (mm) 6.3 4 6.3 5 4 4 6.3 6.3 4 4 4 4 4 6.3 6.3 (mm) 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 5.8 Min. Packaging Q'ty Specification Size Code D B D C B B D D B B B B B D D Ripple tan d Current (120 Hz) (120 Hz) (+105°C) (+20 °C) (mA r.m.s.) 35 0.60 20 0.44 26 0.44 25 0.32 12 0.28 12 0.28 28 0.28 55 0.28 10 0.24 2 0.24 3 0.24 5 0.24 10 0.24 16 0.24 23 0.24 Part No. (RoHS:compliant) Reflow EEEHP0J470P EEEHP1A100R EEEHP1A330P EEEHP1C100R EEEHP1E3R3R EEEHP1E4R7R EEEHP1E100P EEEHP1E220P EEEHP1V2R2R EEEHP1HR22R ✽✽✽ EEEHP1HR33R ✽✽✽ EEEHP1HR47R ✽✽✽ EEEHP1H1R0R EEEHP1H3R3P EEEHP1H4R7P (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) (1) ■ Standard Products (5.5 mm max.) (V) 6.3 10 16 25 35 50 Cap. (±20 %) (μF) 22 47 100 33 10 22 47 4.7 6.8 33 10 22 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 6.8 10 Dia. Length (mm) 4 5 6.3 5 4 5 6.3 4 4 6.3 5 6.3 4 4 4 4 4 4 4 5 5 6.3 (mm) 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 5.4 (pcs) 1000 2000 1000 1000 2000 2000 1000 1000 2000 2000 2000 2000 2000 1000 1000 Endurance : 105 °C 2000 h Case size W.V. Taping Specification Size Code B C D C B C D B B D C D B B B B B B B C C D Ripple tan d Part No. Reflow Current (RoHS:compliant) (120 Hz) (120 Hz) (+105°C) (+20 °C) (mA r.m.s.) 26 0.30 EEEHB0J220SR (1) 46 0.30 EEEHB0J470SR (1) 71 0.30 EEEHB0J101SP (1) 43 0.22 EEEHB1A330SR (1) 28 0.16 EEEHB1C100SR (1) 39 0.16 EEEHB1C220SR (1) 70 0.16 EEEHB1C470SP (1) 22 0.14 EEEHB1E4R7SR (1) 25 0.14 EEEHB1E6R8SR (1) 65 0.14 EEEHB1E330SP (1) 28 0.12 EEEHB1V100SR (1) 55 0.12 EEEHB1V220SP (1) (1) 1 0.12 EEEHB1HR10SR ✽✽✽ (1) 2 0.12 EEEHB1HR22SR ✽✽✽ (1) 3 0.12 EEEHB1HR33SR ✽✽✽ (1) 5 0.12 EEEHB1HR47SR ✽✽✽ 10 0.12 EEEHB1H1R0SR (1) 16 0.12 EEEHB1H2R2SR (1) 16 0.12 EEEHB1H3R3SR (1) 23 0.12 EEEHB1H4R7SR (1) 23 0.12 EEEHB1H6R8SR (1) 35 0.12 EEEHB1H100SP (1) Min. Packaging Q'ty Taping (pcs) 2000 1000 1000 1000 2000 1000 1000 2000 2000 1000 1000 1000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 ✽✽✽ Please kindly accept last shipment : 31/Mar/2015 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Sep. 2013 – EEE-26 –