Products Catalog
Conductive Polymer Aluminum
Electrolytic Capacitors
2023.10
Conductive Polymer Aluminum Electrolytic Capacitors INDEX
Item
Page
Safety and Legal Matters to Be Observed / Matters to Be Observed When Using This Product
1
Selection guide
Line-up
5
Series flow chart
6
Voltage-Capacitance table
7
Explanation of part numbers
9
Mounting specifications
10
Packing specifications
11
JX
: Endurance 125 ℃ 3000 h
12
KX
: Endurance 125 ℃ 5500 h
14
TX
: Endurance 135 ℃ 5500 h
16
JZ
KZ
Series
: Large cap., Endurance 125 ℃ 3000 h
: Large cap., Endurance 125 ℃ 5500 h
18
20
TZ
: Large cap., Endurance 135 ℃ 5500 h
22
CS,CT,CX
: High voltage, Low profile
24
SX
: Large capacitance, Low ESR
27
GX/GX-L
: Large capacitance, Super low ESR
29
LX
: Large capacitance, Low ESR
31
SR,LR,SS,LS,ST,LT
: Low profile, Low ESR
33
GY
: Super low ESR, Large capacitance
35
CY,SY
: Endurance 85 ℃ 2000 h
36
HX
: Endurance 125 ℃ 1000 h
38
Replacement list for “Not recommended for new design”
40
Safety and Legal Matters to Be Observed
Safety and Legal Matters to Be Observed
Product specifications and applications
■ Please be advised that this product and product specifications are subject to change without notice for
improvement purposes. Therefore, please request and confirm the latest delivery specifications that explain
the specifications in detail before the final design, or purchase or use of the product, regardless of the
application. In addition, do not use this product in any way that deviates from the contents of the company's
delivery specifications.
■ Unless otherwise specified in this catalog or the delivery specifications, this product is intended for use in
general electronic equipment (AV products, home appliances, commercial equipment, office equipment,
information and communication equipment, etc.).
When this product is used for the following special cases, please separately discuss the delivery specifications
suited to each application with the company. These include applications requiring special quality and reliability,
wherein their failures or malfunctions may directly threaten human life or cause harm to the human body
(e.g.: space/aircraft equipment, transportation/traffic equipment, combustion equipment, medical equipment,
disaster prevention/crime prevention equipment, safety equipment, etc.).
Safety design and product evaluation
■ Please ensure safety through protection circuits, redundant circuits, etc., in the customer's system design so
that a defect in our company's product will not endanger human life or cause other serious damage.
■ This catalog shows the quality and performance of individual parts. The durability of parts varies depending on
the usage environment and conditions. Therefore, please ensure to evaluate and confirm the state of each part
after it has been mounted in your product in the actual operating environment before use.
If you have any doubts about the safety of this product, then please notify us immediately, and be sure to conduct
a technical review including the above protection circuits and redundant circuits at your company.
Laws / Regulations / Intellectual property
■ The transportation of dangerous goods as designated by UN numbers, UN classifications, etc., does not apply
to this product. In addition, when exporting products, product specifications, and technical information described
in this catalog, please comply with the laws and regulations of the countries to which the products are exported,
especially those concerning security export control.
■ Each model of this product complies with the RoHS Directive (Restriction of the use of hazardous substances in
electrical and electronic equipment) (2011/65/EU and (EU) 2015/863). The date of compliance with the RoHS
Directive and REACH Regulation varies depending on the product model.
Further, if you are using product models in stock and are not sure whether or not they comply with the RoHS
Directive or REACH Regulation, please contact us by selecting "Sales Inquiry" from the inquiry form.
■ During the manufacturing process of this product and any of its components and materials to be used,
Panasonic does not intentionally use ozone-depleting substances stipulated in the Montreal Protocol and
specific bromine-based flame retardants such as PBBs (Poly-Brominated Biphenyls) / PBDEs (Poly-Brominated
Diphenyl Ethers). In addition, the materials used in this product are all listed as existing chemical substances
based on the Act on the Regulation of Manufacture and Evaluation of Chemical Substances.
■ With regard to the disposal of this product, please confirm the disposal method in each country and region
where it is incorporated into your company's product and used.
■ The technical information contained in this catalog is intended to show only typical operation and application
circuit examples of this product. This catalog does not guarantee that such information does not infringe upon
the intellectual property rights of Panasonic or any third party, nor imply that the license of such rights has been
granted.
Panasonic Industry will assume no liability whatsoever if the use of our company's
products deviates from the contents of this catalog or does not comply with the
precautions. Please be advised of these restrictions.
30-Jun-23
1
Matters to Be Observed When Using This Product
Matters to Be Observed When Using This Product
(Conductive Polymer Aluminum Electrolytic Capacitors / SP-Cap)
Use environments and cleaning conditions
■ This product (capacitor) is intended for standard general-purpose use in electronic equipment, and is not designed for
use in the specific environments described below. Using the product in such specific environments or service conditions,
therefore, may affect the performance of the product.
Please check with us about the performance and reliability of the product first before using the product.
(1) Used in liquid, such as water, oil, chemicals, and organic solvents.
(2) Used in a place exposed to direct sunlight, an outdoor place with no shielding, or a dusty place.
(3) Used in a wet place (dew concentration on a resistor, water leakage, etc.), a place exposed to sea breeze, or a place
filled with a corrosive gas, such as Cl2, H2S, NH3, SO2, or NOX.
(4) Used in an environment where static electricity and electromagnetic waves are strong.
(5) The product is located close to a heating component or a flammable material, such as a vinyl cable, is placed near
the product.
(6) The product is used sealed with a resin, etc.
(7) Solder flux of the soldered product is cleansed with a solvent, water, and a water-soluble cleaner.
(Be careful with water soluble solder flux.)
(8) Used in an environment where an acidic or alkali atmosphere is present.
(9) Used in an environment where excessive vibration or impact is applied to the product.
(10) Used under a low atmospheric pressure condition or depressurized condition.
■ After soldering, clean the circuit board at a temperature of 60°C or lower for 5 minutes or less. However, ensure
to thoroughly rinse and dry it (at 100°C for 20 minutes or less). The applicable solvents are as follows.
Pine Alpha ST-100S, Clean-thru 750H/750L/710M, Aqua Cleaner 210SEP, Sunelec B-12, DK be-clear CW-5790,
Techno Cleaner 219, Cold Cleaner P3-375, Terpene Cleaner EC-7R, Techno Care FRW-17/FRW-1/FRV-1,
AXREL 32, IPA (isopropyl alcohol)
(1) Please contact us in advance for the use of cleaning agents other than those listed above and water except
pure water.
(2) Avoid using ozone-depleting substances as cleaning agents to protect the global environment.
(3) Performing ultrasonic cleaning may cause terminal disconnection, which requires prior evaluation.
■ Do not apply strong force to this product. Doing so may adversely affect mounting by causing the deformation
of electrode terminals or other defects.
In addition, the application of strong force may also lead to short circuits, disconnection, increased leakage currents,
and damage to the outer packaging of the product. Do not hold the body of the product or apply force even after it is
attached to the circuit board.
■ When the capacitor is used in a circuit where an impact voltage is applied or a high voltage is applied in a short period
(transient phenomenon) or a high pulse voltage is applied, make sure to use the capacitor at a voltage equal to or
lower than its rated voltage.
Response to anomalies and handling conditions
If this product heats up abnormally, then smoke may be generated from the exterior resin. In this case, immediately turn
off the main power of the equipment and stop using it. Also, keep your face and hands away from the product as it may
become hot and cause burns.
Reliability and product life
■ Most of the failure modes are "short circuits" or "increased leakage currents." The main causes of failures are thermal
stress, electrical stress, and mechanical stress due to reflow and operating temperature environments.
Even within the range of the specified use conditions, it is possible to reduce the failure rate by mitigating the operating
conditions such as the temperature and voltage. Therefore, please design equipment with a sufficient margin.
■ The estimated failure rate is 8.2 Fit or less (estimated at 105°C when the rated voltage is applied) based on data
obtained from the company's reliability test, while the estimated market failure rate is 0.13 Fit or less
(estimated at c = 0 and a confidence level of 60%).
30-Jun-23
2
Matters to Be Observed When Using This Product
Circuit design and circuit board design
■ Do not use this product in high-impedance voltage holding circuits, coupling circuits, time constant circuits, and those
that are significantly affected by leakage currents. Also, do not connect two or more units of this product in series.
■ Applying overvoltage that exceeds the rated voltage specified in the specifications or reverse voltage to this product
may cause an increase in leakage currents or short circuits.
Applied voltage refers to the voltage value applied to a circuit, including the effects of the peak values of ripple voltage
and transient instantaneous voltage, and does not only indicate the steady line voltage value. Design circuits so that
the peak voltage does not exceed the specified voltage.
Use this product by regulating the operating voltage to keep it lower than or equal to the rated voltage even for impulse
voltage circuits, applications involving transient phenomena where a considerably high voltage is applied in a short
time, and cases where high pulse voltages are applied.
■ Keep the operating temperature within the range stipulated in the specifications. Design your equipment in
consideration of not only the ambient temperature where the equipment is placed and its internal temperature,
but also the radiant heat from heating elements (power transistors, resistors, etc.) inside the equipment, and the
temperature of this product, including self-heating due to ripple current.
■ Regulate the ripple current within the rated range specified in the specifications when using the product.
Excessive ripple current causes increased leakage currents and short circuit failures due to self-heating.
Even if the ripple current is within the rated range, prevent the ripple voltage from applying overvoltage or reverse
voltage to the product.
■ The ESR rating is the value at the time of shipment from the factory. The ESR value may vary depending on the
customer's usage conditions.
■ Leakage currents may increase after reflow soldering, and also under no-load conditions at high temperatures,
in high temperature and high humidity environments, or with sudden temperature changes, even if the operating
environment is within the specified range. However, in most cases, SP-Cap reduces leakage currents due to its
self-recovery action when voltage is applied.
■ Insulate the circuit board surface directly under the mounting area of this product. Lay out your circuit board by
defining the dimensions of lands with reference to the mounting specifications stipulated in the requirements.
The dimensions of the actual design circuit should enable the optimum mounting depending on conditions such
as the circuit board, parts, and reflow.
Mounting and storage conditions
■ Check the rating (capacitance, rated voltage), polarity, and land dimensions of this product before mounting it on the
circuit board. When using mounting equipment, large pressure applied during mounting may lead to an increase in
leakage currents, short circuits, disconnection, or falling off from the circuit board.
■ Do not use flow and dip soldering. Reflow soldering can be used with the following methods. Please refer to the
mounting specifications for the recommended conditions for using the atmospheric heat conduction method.
Please contact us for the recommended conditions for using the VPS method.
(1) Atmospheric heat conduction method (infrared ray/hot-air system)
(2) VPS method (target series: CX, CT, SX, ST, GX, LX, LT, and HX)
■ Soldering must be performed at a temperature of 350°C or lower at the tip of the soldering iron and within an
operation time of 10 seconds, without applying excessive force to the product.
In addition, do not remove this product for reuse once it is mounted. Soldering outside the specified conditions can
cause short circuit failures, an increase in ESR, and other defects.
■ Store this product in an environment with a temperature ranging from 5°C to 30°C and a humidity of 70% or lower by
using a moisture-proof bag. The storage period before opening the moisture-proof bag is two years after manufacture,
and after opening the bag is seven days. If these conditions are exceeded, then the outer package may be damaged
due to thermal stress during mounting caused by moisture absorption by the package.
After opening the bag, use up all pieces of this product within the specified storage period.
■ This product is composed of various metals and resins, requiring disposal as industrial waste.
30-Jun-23
3
Reference Information
Reference information
Guidelines
The matters to be observed when using this product cite the technical report issued by the Japan Electronics and
Information Technology Industries Association, and EIAJ RCR-2367D issued in October 2017, "Safety application
guide for fixed aluminum electrolytic capacitors for use in electronic equipment." Please refer to the above technical
report for details.
Intellectual property
Panasonic Group provides customers with safe products and services. We are also making great efforts to protect our
intellectual property rights for Panasonic Group products. Typical patents related to this product are as follows.
[U.S. patent]
USP Nos. 7136276, 7787234
30-Jun-23
4
Conductive Polymer Aluminum Electrolytic Capacitors
Line up
UPDATE
JX
UPDATE
KX
Part No.
EEFJX--EEFKX---
Feature
Low profile
Low ESR
Low ESL
Large cap.
High temp.
Long life
High voltage
Series
■ Long life products
Guaranteed at
125 ℃ 3000 h
Guaranteed at
125 ℃ 5500 h
Guaranteed at
135 ℃ 5500 h
TX
EEFTX---
JZ
EEFJZ---
Guaranteed at 125 ℃ 3000 h
KZ
EEFKZ---
Guaranteed at 125 ℃ 5500 h
TZ
EEFTZ---
Guaranteed at 135 ℃ 5500 h
Large capacitance
Large capacitance
Large capacitance
Category
temperature
(℃)
Rated
voltage
(V)
ESR
(mΩ)
Capacitance
(μF)
Size
(mm)
LxW
7.3x4.3
H
●
●●
-55 to 125
2 to 6.3
3 to 15
120 to 470
1.9
●
●●
-55 to 125
2 to 6.3
3 to 15
120 to 470
1.9
●
●●
-55 to 135
2 to 6.3
3 to 15
120 to 470
1.9
●
●●●
-55 to 125
2
3 to 9
560
2.2
●
●●●
-55 to 125
2
3 to 9
560
2.2
●
●●●
-55 to 135
2
3 to 9
560
2.2
Rated
voltage
(V)
Part No.
Feature
CX
EEFCX---
Standard
CT
EEFCT---
Low profile
CS
EEFCS---
Low profile
SX
EEFSX---
Low ESR
GX
EEFGX---
Super low ESR
High ripple current
LX
EEFLX---
Low ESR ・ Low ESL
ST
EEFST---
LT
EEFLT---
SS
EEFSS---
LS
EEFLS---
SR
EEFSR---
LR
EEFLR---
GY
EEFGY---
Category
temperature
●
-55 to 105
2 to 35
12 to 40
15 to 560
1.9
●
●
-55 to 105
4 to 35
15 to 40
15 to 180
1.4
●
●
-55 to 105
4 to 35
15 to 40
10 to 120
1.1
●
-55 to 105
2 to 6.3
4.5 to 9
82 to 560
1.9
●
-55 to 105
2, 2.5
3
330 to 560
1.9
●●
-55 to 105
2, 2.5
4.5 to 6
330 to 560
1.9
-55 to 105
2, 2.5
6
270 to 330
1.4
-55 to 105
2, 2.5
6
270 to 330
1.4
-55 to 105
2, 2.5
6
180 to 220
1.1
-55 to 105
2, 2.5
6
180 to 220
1.1
-55 to 105
2 to 6.3
4.5 to 9
68 to 220
1.0max.
-55 to 105
2 to 6.3
4.5 to 9
68 to 220
1.0max.
●
-55 to 105
2, 2.5
3
680 to 820
2.8
●
-55 to 85
4, 6.3
15
330 to 470
2.8
●
-55 to 85
4, 6.3
9
330 to 470
2.8
-55 to 125
2 to 25
4.5 to 40
15 to 470
1.9
Low profile ・ Low ESR ● ●
Low profile
Low ESR ・ Low ESL
●●●
Low profile ・ Low ESR ● ●
Low profile
●●●
Low ESR ・ Low ESL
Low profile (1.0 ｍｍ max.)
●●
Low ESR
Low profile (1.0 ｍｍ max.)
●●●
Low ESR ・ Low ESL
Super low ESR / High ripple
current / Height 3.0 ｍｍ max.
●
Guaranteed at 85 ℃
CY
ECGCY---
SY
ECGSY---
Low ESR / Guaranteed at
85 ℃ / Height 3.0 ｍｍ max.
HX
EEFHX---
Guaranteed at 125 ℃
Size
(mm)
Low profile
Low ESR
Low ESL
Large cap.
High temp.
Long life
High voltage
Series
■ Standard products
Height 3.0 ｍｍ max.
●
●
●
(℃)
ESR
(mΩ)
Capacitance
(μF)
LxW
7.3x4.3
H
・ 2 to 6.3 V : On sale
・ 10 to 35 V : Not recommended for new design
※ Click
here for Replacement (10 to 35 V)
31-Oct-23
5
Conductive Polymer Aluminum Electrolytic Capacitors
Series flow chart
■ Long life products
2-terminals 〈Standard〉
JZ
KZ
TZ
125 ℃ 3000 h
Large capacitance
125 ℃ 5500 h
Large capacitance
135 ℃ 5500 h
Large capacitance
7.3 x 4.3 x 2.2 mm
2V
7.3 x 4.3 x 2.2 mm
2V
7.3 x 4.3 x 2.2 mm
2V
560 μF
560 μF
560 μF
3 to 9 mΩ
3 to 9 mΩ
3 to 9 mΩ
Large
capacitance
JX
Long life
Large
capacitance
UPDATE
Long life
Large
capacitance
UPDATE
KX
TX
125 ℃ 3000 h
125 ℃ 5500 h
135 ℃ 5500 h
7.3 x 4.3 x 1.9 mm
2 to 6.3 V
7.3 x 4.3 x 1.9 mm
2 to 6.3 V
7.3 x 4.3 x 1.9 mm
2 to 6.3 V
120 to 470 μF
120 to 470 μF
120 to 470 μF
3 to 15 mΩ
3 to 15 mΩ
3 to 15 mΩ
■ Standard products
2-terminals 〈Standard〉
Large capacitance
CX
Low profile
HX
Guaranteed
at 125 ℃
7.3 x 4.3 x 1.9 mm
2 to 25 V
CT
CS
Guaranteed
at 85 ℃
Height 3.0 ｍｍ max.
Low profile
Low profile
7.3 x 4.3 x 2.8 mm
4 to 6.3 V
7.3 x 4.3 x 1.4 mm
7.3 x 4.3 x 1.1 mm
Standard
7.3 x 4.3 x 1.9 mm
2 to 35 V
15 to 560 μF
12 to 40 mΩ
CY / SY
4 to 35 V
4 to 35 V
15 to 180 μF
10 to 120 μF
12 to 40 mΩ
12 to 40 mΩ
330 to 470 μF
15 to 470 μF
9 to 15 mΩ
4.5 to 40 mΩ
2-terminals 〈Low ESR〉
SX
Low profile
Super low
ESR
Low ESR
7.3 x 4.3 x 1.9 mm
2 to 6.3 V
82 to 560 μF
4.5 to 9 mΩ
GX
ST
Low profile
Low ESR
Large capacitance
Super low ESR
High ripple current
7.3 x 4.3 x 1.9 mm
7.3 x 4.3 x 1.4 mm
330 to 560 μF
Super low ESR
High ripple current
Height 3.0 mm max.
3 mΩ
7.3 x 4.3 x 2.8 mm
2 to 2.5 V
2 to 2.5 V
GY
270 to 330 μF
6 mΩ
SS
SR
Low profile
Low ESR
Low profile
(1.0 mm max.)
Low ESR
7.3 x 4.3 x 1.1 mm
7.3 x 4.3 x 1.0 mm
2 to 2.5 V
2 to 6.3 V
180 to 220 μF
68 to 220 μF
6 mΩ
4.5 to 9 mΩ
2 to 2.5 V
680 to 820 μF
3 mΩ
3-terminals 〈Low ESR / Low ESL〉
LX
Low ESR
Low ESL
7.3 x 4.3 x 1.9 mm
2 to 2.5 V
330 to 560 μF
4.5 to 6 mΩ
Low profile
Super low
ESR
GX-L
Super low ESR
High ripple current
7.3 x 4.3 x 1.9 mm
*ESL : 0.5 nH (Typ.) @500 MHz
LT
Low profile
Low ESR
Low ESL
LS
LR
270 to 330 μF
Low profile
Low ESR
Low ESL
Low profile
(1.0 ｍｍ max.)
Low ESR / Low ESL
6 mΩ
7.3 x 4.3 x 1.1 mm
7.3 x 4.3 x 1.0 mm
7.3 x 4.3 x 1.4 mm
2 to 2.5 V
2 to 2.5 V
2 to 2.5 V
2 to 6.3 V
470 to 560 μF
180 to 220 μF
68 to 220 μF
3 mΩ
6 mΩ
4.5 to 9 mΩ
31-Oct-23
6
Conductive Polymer Aluminum Electrolytic Capacitors
Voltage - Capacitance table (Vol. : 2.0 to 6.3 V / Cap. : 10 to 120 μF）
Series
(ESR mΩ)
V
μF
10
15
22
33
47
56
68
82
100
120
SX
(9)
SX
(9)
CS
(15)
SR
(9)
LR
(9)
CT
(15)
CX
(15)
CX
(15)
SX
(7)
JX
(15)
KX
(15)
TX
(15)
2.0
2.5
4.0
CS
(15)
SR
(9)
LR
(9)
6.3
Size list LxWxH (mm)
SR, LR
SS, LS, CS
CT, ST, LT
7.3 x 4.3 x 1.0 max.
7.3 x 4.3 x 1.1
7.3 x 4.3 x 1.4
CX, GX, LX, LX, JX, KX, TX, HX
JZ, KZ, TZ
CY, SY
7.3 x 4.3 x 1.9
7.3 x 4.3 x 2.2
7.3 x 4.3 x 2.8
31-Oct-23
7
Conductive Polymer Aluminum Electrolytic Capacitors
Voltage - Capacitance table (Vol. : 2.0 to 6.3 V / Cap. : 150 to 820 μF）
Series
(ESR mΩ)
V
μF
150
180
220
270
330
390
470
560
SX
(9)
CX
(15)
SX
(9)
SR
(6,4.5)
LR
(6,4.5)
SS
(6)
LS
(6)
CX
(12)
SX
(9,6,4.5)
CX
(15,12)
SX
(9,6,4.5)
GX
(3)
LX
(6,4.5)
ST
(6)
LT
(6)
JX
(9)
KX
(9)
TX
(9)
CX
(15)
SX
(9,6,4.5)
CX
(15)
SX
(9,6,4.5)
GX
(3)
GX-L
(3)
LX
(6,4.5)
JX
(9,4.5,3)
KX
(9,4.5,3)
HX
(15,9,6,4.5)
TX
(9,4.5,3)
CX
(15)
SX
(4.5)
GX
(3)
GX-L
(3)
LX
(6,4.5)
JZ
(9,4.5,3)
KZ
(9,4.5,3)
TZ
(9,4.5,3)
SX
(9)
SX
(9)
SR
(6,4.5)
LR
(6,4.5)
SS
(6)
LS
(6)
CX
(15)
SX
(9,7)
JX
(9)
KX
(9)
TX
(9)
SX
(7)
ST
(6)
LT
(6)
CX
(15)
SX
(9,6)
GX
(3)
LX
(6,4.5)
JX
(9)
KX
(9)
HX
(15,9,6,4.5)
TX
(9)
CX
(15)
SX
(9,6,4.5)
JX
(9,4.5,3)
KX
(9,4.5,3)
TX
(9,4.5,3)
CX
(15)
SX
(9,6,4.5)
GX
(3)
GX-L
(3)
LX
(6,4.5)
JX
(9,4.5,3)
KX
(9,4.5,3)
CX
(15)
SX
(9,7)
JX
(15)
KX
(15)
TX
(15)
CT
(15)
CX
(15,12)
SX
(9)
JX
(15)
KX
(15)
TX
(15)
CX
(15, 12)
SX
(9)
JX
(15)
KX
(15)
TX
(15)
CX
(15)
SX
(9)
CX
(15)
SX
(9,6)
CX
(15,12)
SX
(9)
JX
(15)
KX
(15)
TX
(15)
CX
(15)
SX
(9)
CX
(15)
SX
(9)
2.0
2.5
4.0
6.3
680
820
GY
(3)
GY
(3)
CY
(15)
SY
(15)
CY
(15)
SY
(9)
Size list LxWxH (mm)
SR, LR
SS, LS, CS
CT, ST, LT
7.3 x 4.3 x 1.0 max.
7.3 x 4.3 x 1.1
7.3 x 4.3 x 1.4
CX, GX, LX, LX, JX, KX, TX, HX
JZ, KZ, TZ
CY, SY
7.3 x 4.3 x 1.9
7.3 x 4.3 x 2.2
7.3 x 4.3 x 2.8
31-Oct-23
8
Conductive Polymer Aluminum Electrolytic Capacitors
Explanation of part numbers
◇ Part number system
EEF
CX
Product classification
3 figures
Series
JX
KX
TX
JZ
KZ
TZ
CX
CT
CS
SX
LX
GX
ST
LT
SS
LS
SR
LR
GY
CY
SY
HX
Product
classification
EEF
ECG
EEF
Series
2 figures
Series
Code
JX
KX
TX
JZ
KZ
TZ
CX
CT
CS
SX
LX
GX
ST
LT
SS
LS
SR
LR
GY
CY
SY
HX
JX
KX
TX
JZ
KZ
TZ
CX
CT
CS
SX
LX
GX
ST
LT
SS
LS
SR
LR
GY
CY
SY
HX
Height
(mm)
Series
1.9 ± 0.1
JX
KX
TX
2.2 ± 0.2
JZ
KZ
TZ
CX
SX
1.9 ± 0.1
GX
LX
HX
1.4 ± 0.1
1.1 ± 0.1
1.0 (max.)
2.8 ± 0.2
CT
ST
LT
CS
SS
LS
SR
LR
GY
CY
SY
Special
code
RF
RE
RC
RB
RE
RC
RB
R
XR
ER
E7
XE
E4
R
L
R
R4
R
R9
R6
R4
R
R
R
R
R
R
R
R4
R
R4
R
R
R
0E
Voltage code
2 figures
Voltage
(V)
2
2.5
4
6.3
10
16
20
25
35
Code
0D
0E
0G
0J
1A
1C
1D
1E
1V
471
Capacitance code
3 figures
Cap.
(μF)
10
15
22
33
47
56
68
100
120
150
180
220
270
330
390
470
560
680
820
ESR (mΩ max.)
15
9
4.5
3
9
4.5
3
15 ( to 6.3 V), 40 (10 V to 35 V)
12
9
7
6
4.5
3
3
6
4.5
15 ( to 2.5 V), 40 (10 V to 25 V)
9
6
4.5
15 ( to 6.3 V), 40 (10 V to 35 V)
6
6
15 ( to 6.3 V), 40 (10 V to 35 V)
6
6
6 ( to 2.5 V), 9 (4 V to 6.3 V)
4.5
6 ( to 2.5 V), 9 (4 V to 6.3 V)
4.5
3
15
9
R
Special code
1 to 2 figures
Code
100
150
220
330
470
560
680
101
121
151
181
221
271
331
391
471
561
681
821
Terminals
2
3
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
〇
26-May-23
9
Conductive Polymer Aluminum Electrolytic Capacitors
Mounting specification
● Recommendable reflow soldering
Temperature on the surface of capacitor(℃)
Peak temperature 260℃
10 s max.
Soldering
temperature
250
200
150
Soldering
time
SP-Cap recommended
profile condition of the
IPC/J-STD-020D standard
100
150 to 200 ℃
180 s max.
50
Soldering temperature and soldering time
Temperature
Time
30 s max.
≧ 255℃
130 s max.
≧ 230℃
150 s max.
≧ 217℃
Time (s)
Reflow cycle : 3 max.
● Typical land pattern
□ 2-terminals
For standard terminal（C＊, S＊, G＊, J＊, K＊, T＊, HX series）
8.8
2.8
4.0
capacitor
Unit:ｍｍ
□ 3-terminals
For low ESL terminal（L＊, GX-L series）
〈VIA〉
For low ESL terminal（L＊, GX-L series）
8.8
4.0
VIA（+）10-ø0.4
VIA（ー）10-ø0.4
2.7
⊖
⊖
⊖
⊖
⊕
1.9
2.8
5.1
⊕
1.3
capacitor
capacitor
1.15
0.5
0.9
0.9
0.3
0.5
0.9
0.3
0.9
0.9
Unit:ｍｍ
26-May-23
10
Conductive Polymer Aluminum Electrolytic Capacitors
Packaging specifications
● Reel dimensions
Unit:ｍｍ
Reel
ø330
ø180
E
φD
R:1.0
W
øB
80
60
øC
13±0.5
13±0.5
øD
21±0.8
21±0.8
E
2±0.5
2±0.5
W
14
14
t
3
3
φA
φB
φC
øA
330
180
t
● Embossed taping
(12ｍｍ tape)
Tape running direction
øD0（Feeding hole）
P0
P2
E
t
A
W
⊕
a
a
b
F
⊖
b
P1
Chip pocket
B
a-a
Cross section
b-b
Cross section
Unit:ｍｍ
A
B
W
F
E
P1
P2
P0
7.6±0.2
4.5±0.2
12±0.3
5.5±0.1
1.75±0.1
8.0±0.1
2.0±0.1
4.0±0.1
øD0
+0.1
0
1.5
Upper row : Product height / Lower berth : t
to 1.1
1.5±0.2
1.4 to 1.9
2.4±0.2
2.2
2.9±0.2
2.8
3.5±0.2
● Packaging box dimensions
Reel
ø330
ø180
a
400 max.
320 max.
b
400 max.
240 max.
Unit:ｍｍ
c
135 max.
135 max.
a
c
b
26-May-23
11
UPDATE
Conductive Polymer Aluminum
Electrolytic Capacitors
Surface Mount Type
JX series ［High temperature long life product］
Features
● Endurance 125 ℃ 3000 h
● Damp heat 85℃ 85％ 1000 h
● Low ESR (3 to 15 mΩ)
● RoHS compliance, Halogen free
Specifications
Series
JX
Category temp. range
Rated voltage range
–55 ℃ to +125 ℃
2.0 V to 6.3 V
Category voltage range
1.6 V, 2.0 V, 3.2 V, 5.0 V
Rated cap. range
120 μF to 470 μF
Capacitance tolerance
±20 % (120 Hz / +20 ℃)
DC leakage current
I ≦ 0.1 CV (μA) 2 minutes
Dissipation factor (tan δ)
≦ 0.1 (120 Hz / + 20 ℃)
Surge voltage (V)
Rated voltage × 1.25 (15 ℃ to 35 ℃)
+125 ℃ 3000 h, category voltage applied
Capacitance change
Within ±20 % of the initial value
Endurance
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 3 times of the initial limit
+85 ℃, 85 % RH, 1000 h, No-applied voltage
2.0 V, 2.5 V
Capacitance change of
initial measurd value
+70 %, –20 %
Damp heat
(Steady state)
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 5 times of the initial limit
Marking
4.0 V
6.3 V
+60 %, –20 %
+50 %, –20 %
Dimensions (not to scale)
Polarity (Positive)
⊕
⊖
H
Capacitance (μF）
P
P
W1
W2
W2
L
Lot No.
R. voltage code
Rated voltage code
2D code *1
Unit：V
d
2.0
g
4.0
e
2.5
j
6.3
Unit：ｍｍ
*1: Internal management information
Series
L±0.2
JX
7.3
W1±0.2 W2±0.1
4.3
2.4
H±0.1
P±0.3
1.9
1.3
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
12
31-Oct-23
JX series
Characteristics list
Series
Rated
voltage
[105 ℃]
(V)
2.0
2.5
JX
Case size (mm)
Category
voltage
[125 ℃]
(V)
Capacitance
1.6
6.3
3.2
5.0
Part number
W
H
current
(mA rms)
ESR*2
(mΩ max.)
330
7.3
4.3
1.9
6300
9
EEFJX0D331RE
7.3
4.3
1.9
6300
9
EEFJX0D471RE
3500
470
7.3
4.3
1.9
8500
4.5
EEFJX0D471RC
3500
7.3
4.3
1.9
10200
3
EEFJX0D471RB
3500
220
7.3
4.3
1.9
6300
9
EEFJX0E221RE
3500
330
7.3
4.3
1.9
6300
9
EEFJX0E331RE
3500
7.3
4.3
1.9
6300
9
EEFJX0E391RE
3500
7.3
4.3
1.9
8500
4.5
EEFJX0E391RC
3500
7.3
4.3
1.9
10200
3
EEFJX0E391RB
3500
7.3
4.3
1.9
6300
9
EEFJX0E471RE
3500
7.3
4.3
1.9
8500
4.5
EEFJX0E471RC
3500
7.3
4.3
1.9
10200
3
EEFJX0E471RB
3500
150
7.3
4.3
1.9
5100
15
EEFJX0G151RF
3500
180
7.3
4.3
1.9
5100
15
EEFJX0G181RF
3500
220
7.3
4.3
1.9
5100
15
EEFJX0G221RF
3500
120
7.3
4.3
1.9
5100
15
EEFJX0J121RF
3500
150
7.3
4.3
1.9
5100
15
EEFJX0J151RF
3500
390
2.0
Ripple
Min.
Packaging
Q’ty
L
(μF)
NEW
4.0
Specification
470
*1
(pcs)
3500
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
2.0 V to 6.3 V
Coefficient
T ≦ 45 ℃
45 ℃ < T ≦ 85 ℃
85 ℃ < T ≦ 105 ℃
105 ℃ < T ≦ 125 ℃
1.0
0.7
0.25
0.25
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
13
31-Oct-23
UPDATE
Conductive Polymer Aluminum
Electrolytic Capacitors
Surface Mount Type
KX series ［High temperature long life product］
Features
● Endurance 125 ℃ 5500 h
● Damp heat 85℃ 85％ 1000 h
● Low ESR (3 ~ 15 mΩ max.)
● RoHS compliance, Halogen free
Specifications
Series
KX
Category temp. range
–55 ℃ to +125 ℃
2.0 V to 6.3 V
Rated voltage range
Category voltage range
1.6 V, 2.0 V, 3.2 V, 5.0 V
120 μF to 470 μF
Rated cap. range
Capacitance tolerance
±20 % (120 Hz / +20 ℃)
DC leakage current
I ≦ 0.1 CV (μA) 2 minutes
Dissipation factor (tan δ)
≦ 0.1 (120 Hz / + 20 ℃)
Surge voltage (V)
Rated voltage × 1.25 (15 ℃ to 35 ℃)
+125 ℃ 5500 h, category voltage applied
Capacitance change
Within ±20 % of the initial value
Endurance
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 3 times of the initial limit
+85 ℃, 85 % RH, 1000 h, No-applied voltage
2.0 V, 2.5 V
Capacitance change of
initial measurd value
+70 %, –20 %
Damp heat
(Steady state)
4.0 V
+60 %, –20 %
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 5 times of the initial limit
Marking
6.3 V
+50 %, –20 %
Dimensions (not to scale)
Polarity (Positive)
⊕
⊖
H
Capacitance (μF）
P
P
W1
W2
W2
L
Lot No.
R. voltage code
R. voltage code
2D code *1
Unit：V
d
2.0
g
4.0
e
2.5
j
6.3
Unit：ｍｍ
*1: Internal management information
Series
L±0.2
KX
7.3
W1±0.2 W2±0.1
4.3
2.4
H±0.1
P±0.3
1.9
1.3
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
14
31-Oct-23
KX series
Characteristics list
Series
Rated
voltage
[105 ℃]
(V)
2.0
KX
Case size (mm)
Category
voltage
[125 ℃]
(V)
Capacitance
NEW
4.0
3.2
6.3
5.0
Part number
W
H
current
(mA rms)
ESR*2
(mΩ max.)
330
7.3
4.3
1.9
6300
9
EEFKX0D331RE
7.3
4.3
1.9
6300
9
EEFKX0D471RE
3500
470
7.3
4.3
1.9
8500
4.5
EEFKX0D471RC
3500
7.3
4.3
1.9
10200
3
EEFKX0D471RB
3500
220
7.3
4.3
1.9
6300
9
EEFKX0E221RE
3500
330
7.3
4.3
1.9
6300
9
EEFKX0E331RE
3500
7.3
4.3
1.9
6300
9
EEFKX0E391RE
3500
7.3
4.3
1.9
8500
4.5
EEFKX0E391RC
3500
7.3
4.3
1.9
10200
3
EEFKX0E391RB
3500
7.3
4.3
1.9
6300
9
EEFKX0E471RE
3500
7.3
4.3
1.9
8500
4.5
EEFKX0E471RC
3500
7.3
4.3
1.9
10200
3
EEFKX0E471RB
3500
150
7.3
4.3
1.9
5100
15
EEFKX0G151RF
3500
180
7.3
4.3
1.9
5100
15
EEFKX0G181RF
3500
220
7.3
4.3
1.9
5100
15
EEFKX0G221RF
3500
120
7.3
4.3
1.9
5100
15
EEFKX0J121RF
3500
150
7.3
4.3
1.9
5100
15
EEFKX0J151RF
3500
390
2.0
Ripple
Min.
Packaging
Q’ty
L
(μF)
1.6
2.5
Specification
470
*1
(pcs)
3500
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
2.0 V to 6.3 V
Coefficient
T ≦ 45 ℃
45 ℃ < T ≦ 85 ℃
85 ℃ < T ≦ 125 ℃
1.0
0.7
0.25
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
15
31-Oct-23
NEW
Conductive Polymer Aluminum
Electrolytic Capacitors
Surface Mount Type
TX series ［High temperature long life product］
Features
● Endurance 135 ℃ 5500 h
● Damp heat 85℃ 85％ 1000 h
● Low ESR (3 ~ 15 mΩ max.)
● RoHS compliance, Halogen free
Specifications
Series
TX
–55 ℃ to +135 ℃
Category temp. range
Rated voltage range
2.0 V to 6.3 V
Category voltage range
1.6 V, 2.0 V, 3.2 V, 5.0 V
Rated cap. range
120 μF to 470 μF
Capacitance tolerance
±20 % (120 Hz / +20 ℃)
DC leakage current
I ≦ 0.1 CV (μA) 2 minutes
Dissipation factor (tan δ)
≦ 0.1 (120 Hz / + 20 ℃)
Surge voltage (V)
Rated voltage × 1.25 (15 ℃ to 35 ℃)
+135 ℃ 5500 h, category voltage applied
Capacitance change
Endurance
Within ±20 % of the initial value
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 3 times of the initial limit
+85 ℃, 85 % RH, 1000 h, No-applied voltage
2.0 V, 2.5 V
Capacitance change of
initial measurd value
+70 %, –20 %
Damp heat
(Steady state)
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 5 times of the initial limit
Marking
4.0 V
6.3 V
+60 %, –20 %
+50 %, –20 %
Dimensions (not to scale)
Polarity (Positive)
⊕
⊖
H
Capacitance (μF）
P
P
W1
W2
W2
L
Lot No.
R. voltage code
R. voltage code
2D code *1
Unit：V
d
2.0
g
4.0
e
2.5
j
6.3
Unit：ｍｍ
*1: Internal management information
Series
L±0.2
TX
7.3
W1±0.2 W2±0.1
4.3
2.4
H±0.1
P±0.3
1.9
1.3
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
16
26-May-23
TX series
Characteristics list
Series
Rated
voltage
[105 ℃]
(V)
Category
voltage
[135 ℃]
(V)
Case size (mm)
Capacitance
TX
1.6
2.5
H
current
(mA rms)
ESR*2
(mΩ max.)
7.3
4.3
1.9
6300
9
EEFTX0D331RE
7.3
4.3
1.9
6300
9
EEFTX0D471RE
3500
7.3
4.3
1.9
8500
4.5
EEFTX0D471RC
3500
7.3
4.3
1.9
10200
3
EEFTX0D471RB
3500
220
7.3
4.3
1.9
6300
9
EEFTX0E221RE
3500
330
7.3
4.3
1.9
6300
9
EEFTX0E331RE
3500
7.3
4.3
1.9
6300
9
EEFTX0E391RE
3500
7.3
4.3
1.9
8500
4.5
EEFTX0E391RC
3500
7.3
4.3
1.9
10200
3
EEFTX0E391RB
3500
470
390
3.2
6.3
5.0
Part number
W
2.0
4.0
Ripple
Min.
Packaging
Q’ty
L
(μF)
330
2.0
Specification
*1
(pcs)
3500
150
7.3
4.3
1.9
5100
15
EEFTX0G151RF
3500
180
7.3
4.3
1.9
5100
15
EEFTX0G181RF
3500
220
7.3
4.3
1.9
5100
15
EEFTX0G221RF
3500
120
7.3
4.3
1.9
5100
15
EEFTX0J121RF
3500
150
7.3
4.3
1.9
5100
15
EEFTX0J151RF
3500
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
2.0 V to 6.3 V
Coefficient
T ≦ 45 ℃
45 ℃ < T ≦ 85 ℃
85 ℃ < T ≦ 135 ℃
1.0
0.7
0.25
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
17
26-May-23
NEW
Conductive Polymer Aluminum
Electrolytic Capacitors
Surface Mount Type
JZ series ［High temperature long life product］
Features
● Endurance 125 ℃ 3000 h
● Damp heat 85℃ 85％ 1000 h
● Low ESR (3 to 9 mΩ)
● RoHS compliance, Halogen free
Specifications
Series
JZ
Category temp. range
–55 ℃ to +125 ℃
2.0 V
Rated voltage range
Category voltage range
1.6 V
Rated cap. range
560 μF
Capacitance tolerance
±20 % (120 Hz / +20 ℃)
DC leakage current
I ≦ 0.1 CV (μA) 2 minutes
Dissipation factor (tan δ)
≦ 0.1 (120 Hz / + 20 ℃)
Surge voltage (V)
Rated voltage × 1.25 (15 ℃ to 35 ℃)
+125 ℃ 3000 h, category voltage applied
Capacitance change
Within ±20 % of the initial value
Endurance
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 3 times of the initial limit
+85 ℃, 85 % RH, 1000 h, No-applied voltage
2.0 V
Capacitance change of
initial measurd value
+70 %, –20 %
Damp heat
(Steady state)
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 5 times of the initial limit
Marking
Dimensions (not to scale)
Polarity (Positive)
⊕
⊖
H
Capacitance (μF）
P
P
W1
W2
W2
L
Lot No.
R. voltage code
2D code *1
Unit：ｍｍ
Rated voltage code
d
Unit：V
2.0
*1: Internal management information
Series
L±0.2
JZ
7.3
W1±0.2 W2±0.1
4.3
2.4
H±0.1
P±0.3
2.2
1.3
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
18
26-May-23
JZ series
Characteristics list
Series
JZ
Rated
voltage
[105 ℃]
(V)
Category
voltage
[125 ℃]
(V)
2.0
1.6
Case size (mm)
Specification
Capacitance
(μF)
560
Ripple
Part number
Min.
Packaging
Q’ty
L
W
H
current
(mA rms)
ESR*2
(mΩ max.)
7.3
4.3
2.2
6300
9
EEFJZ0D561RE
3000
7.3
4.3
2.2
8500
4.5
EEFJZ0D561RC
3000
7.3
4.3
2.2
10200
3
EEFJZ0D561RB
3000
*1
(pcs)
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
2.0 V
Coefficient
T ≦ 45 ℃
45 ℃ < T ≦ 85 ℃
85 ℃ < T ≦ 125 ℃
1.0
0.7
0.25
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
19
26-May-23
NEW
Conductive Polymer Aluminum
Electrolytic Capacitors
Surface Mount Type
KZ series ［High temperature long life product］
Features
● Endurance 125 ℃ 5500 h
● Damp heat 85℃ 85％ 1000 h
● Low ESR (3 to 9 mΩ)
● RoHS compliance, Halogen free
Specifications
Series
KZ
Category temp. range
–55 ℃ to +125 ℃
2.0 V
Rated voltage range
Category voltage range
1.6 V
Rated cap. range
560 μF
Capacitance tolerance
±20 % (120 Hz / +20 ℃)
DC leakage current
I ≦ 0.1 CV (μA) 2 minutes
Dissipation factor (tan δ)
≦ 0.1 (120 Hz / + 20 ℃)
Surge voltage (V)
Rated voltage × 1.25 (15 ℃ to 35 ℃)
+125 ℃ 5500 h, category voltage applied
Capacitance change
Endurance
Within ±20 % of the initial value
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 3 times of the initial limit
+85 ℃, 85 % RH, 1000 h, No-applied voltage
2.0 V
Capacitance change of
initial measurd value
+70 %, –20 %
Damp heat
(Steady state)
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 5 times of the initial limit
Marking
Dimensions (not to scale)
Polarity (Positive)
⊕
⊖
H
Capacitance (μF）
P
P
W1
W2
W2
L
Lot No.
R. voltage code
2D code *1
Unit：ｍｍ
Rated voltage code
d
Unit：V
2.0
*1: Internal management information
Series
L±0.2
KZ
7.3
W1±0.2 W2±0.1
4.3
2.4
H±0.1
P±0.3
2.2
1.3
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
20
26-May-23
KZ series
Characteristics list
Series
KZ
Rated
voltage
[105 ℃]
(V)
Category
voltage
[125 ℃]
(V)
2.0
1.6
Case size (mm)
Specification
Capacitance
(μF)
560
Ripple
Part number
Min.
Packaging
Q’ty
L
W
H
current
(mA rms)
ESR*2
(mΩ max.)
7.3
4.3
2.2
6300
9
EEFKZ0D561RE
3000
7.3
4.3
2.2
8500
4.5
EEFKZ0D561RC
3000
7.3
4.3
2.2
10200
3
EEFKZ0D561RB
3000
*1
(pcs)
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
2.0 V
Coefficient
T ≦ 45 ℃
45 ℃ < T ≦ 85 ℃
85 ℃ < T ≦ 125 ℃
1.0
0.7
0.25
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
21
26-May-23
NEW
Conductive Polymer Aluminum
Electrolytic Capacitors
Surface Mount Type
TZ series ［High temperature long life product］
Features
● Endurance 135 ℃ 5500 h
● Damp heat 85℃ 85％ 1000 h
● Low ESR (3 to 9 mΩ)
● RoHS compliance, Halogen free
Specifications
Series
TZ
–55 ℃ to +135 ℃
Category temp. range
Rated voltage range
2.0 V
Category voltage range
1.6 V
Rated cap. range
560 μF
Capacitance tolerance
±20 % (120 Hz / +20 ℃)
DC leakage current
I ≦ 0.1 CV (μA) 2 minutes
Dissipation factor (tan δ)
≦ 0.1 (120 Hz / + 20 ℃)
Surge voltage (V)
Rated voltage × 1.25 (15 ℃ to 35 ℃)
+135 ℃ 5500 h, category voltage applied
Capacitance change
Endurance
Within ±20 % of the initial value
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 3 times of the initial limit
+85 ℃, 85 % RH, 1000 h, No-applied voltage
2.0 V
Capacitance change of
initial measurd value
+70 %, –20 %
Damp heat
(Steady state)
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 5 times of the initial limit
Marking
Dimensions (not to scale)
Polarity (Positive)
⊕
⊖
H
Capacitance (μF）
P
P
W1
W2
W2
L
Lot No.
R. voltage code
2D code *1
Unit：ｍｍ
Rated voltage code
d
Unit：V
2.0
*1: Internal management information
Series
L±0.2
TZ
7.3
W1±0.2 W2±0.1
4.3
2.4
H±0.1
P±0.3
2.2
1.3
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
22
26-May-23
TZ series
Characteristics list
Series
TZ
Rated
voltage
[105 ℃]
(V)
Category
voltage
[135 ℃]
(V)
2.0
1.6
Case size (mm)
Specification
Capacitance
(μF)
560
Ripple
Part number
Min.
Packaging
Q’ty
L
W
H
current
(mA rms)
ESR*2
(mΩ max.)
7.3
4.3
2.2
6300
9
EEFTZ0D561RE
3000
7.3
4.3
2.2
8500
4.5
EEFTZ0D561RC
3000
7.3
4.3
2.2
10200
3
EEFTZ0D561RB
3000
*1
(pcs)
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
2.0 V
Coefficient
T ≦ 45 ℃
45 ℃ < T ≦ 85 ℃
85 ℃ < T ≦ 135 ℃
1.0
0.7
0.25
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
23
26-May-23
Conductive Polymer Aluminum
Electrolytic Capacitors
Surface Mount Type
CS/CT/CX series
Features
● High voltage (35 V max.)
● Low profile (Height 1.0 mm max.)
・2 to 6.3 V : On sale
● High ripple current (5600 mA rms max.)
・ 10 to 35 V : Not recommended for new design
● RoHS compliance, Halogen free
※ Click
here for Replacement (10 to 35 V)
Specifications
Series
CS
CT
Category temp. range
CX
–55 ℃ to +105 ℃
Rated voltage range
4.0 V to 35 V
Rated cap. range
10 μF to 120 μF
2.0 V to 35 V
15 μF to 180 μF
15 μF to 560 μF
Capacitance tolerance
±20 % (120 Hz / +20 ℃)
DC leakage current
I ≦ 0.1 CV(μA) [2.0 V to 6.3 V, 2 min], I ≦ 0.3 CV(μA) [10 V to 35 V, 2 min]
Dissipation factor (tan δ)
≦ 0.06 (120 Hz / + 20 ℃)
Surge voltage (V)
Rated voltage × 1.25 [2.0 V to 16 V], × 1.15 [20 V to 35 V] (15 ℃ to 35 ℃)
+105 ℃ 2000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
Endurance
Dissipation factor (tan δ)
≦ 2 times of the initial limit
≦ 3 times of the initial limit : 2.0 V to 6.3 V
Within the initial limit : 10 V to 35 V
DC leakage current
+60 ℃, 90 % RH, 500 h, No-applied voltage
Capacitance change
of initial measurd value
Damp heat
(Steady state)
Dissipation factor (tan δ)
DC leakage current
2.0 V to 2.5 V
4.0 V, 10 V to 35 V
6.3 V
+70 %, –20 %
+60 %, –20 %
+50 %, –20 %
≦ 2 times of the initial limit
Within the initial limit : 2.0 V to 6.3 V
≦ 3 times of the initial limit : 10 V to 35 V
Marking
Dimensions (not to scale)
⊕
⊖
Polarity bar (Positive)
H
Capacitance (μF)
P
P
W1
W2
W2
L
Lot No.
R. voltage code
Unit：ｍｍ
R. voltage code
d
2.0
e
g
Unit：V
Series
L±0.2
W1±0.2 W2±0.1
H±0.1
P±0.3
6.3
D
20
CS
7.3
4.3
2.4
1.1
1.3
2.5
ｊ
A
10
E
25
CT
7.3
4.3
2.4
1.4
1.3
4.0
C
16
V
35
CX
7.3
4.3
2.4
1.9
1.3
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
24
30-Jun-20
CS/CT/CX series
Characteristics list
■ 2.0 V to 6.3 V
Series
CS
CT
Rated
voltage
(V)
Case size (mm)
Specification
Capacitance
(μF)
L
W
H
Ripple
current*1
(mA rms)
ESR*2
(mΩ max.)
Part number
Min.
Packaging
Q’ty*3
(pcs)
4.0
120
7.3
4.3
1.1
5100
15
EEFCS0G121R
3500
6.3
68
7.3
4.3
1.1
5100
15
EEFCS0J680R
3500
4.0
180
7.3
4.3
1.4
5100
15
EEFCT0G181R
3500
6.3
100
7.3
4.3
1.4
5100
15
EEFCT0J101R
3500
220
7.3
4.3
1.9
5100
15
EEFCX0D221R
3500
270
7.3
4.3
1.9
5600
12
EEFCX0D271XR
3500
7.3
4.3
1.9
5100
15
EEFCX0D331R
3500
7.3
4.3
1.9
5600
12
EEFCX0D331XR
3500
2.0
2.5
CX
330
390
7.3
4.3
1.9
5100
15
EEFCX0D391R
3500
470
7.3
4.3
1.9
5100
15
EEFCX0D471R
3500
560
7.3
4.3
1.9
5100
15
EEFCX0D561R
3500
220
7.3
4.3
1.9
5100
15
EEFCX0E221R
3500
330
7.3
4.3
1.9
5100
15
EEFCX0E331R
3500
390
7.3
4.3
1.9
5100
15
EEFCX0E391R
3500
470
7.3
4.3
1.9
5100
15
EEFCX0E471R
3500
150
7.3
4.3
1.9
5100
15
EEFCX0G151R
3500
7.3
4.3
1.9
5100
15
EEFCX0G181R
3500
7.3
4.3
1.9
5600
12
EEFCX0G181XR
3500
7.3
4.3
1.9
5100
15
EEFCX0G221R
3500
7.3
4.3
1.9
5600
12
EEFCX0G221XR
3500
7.3
4.3
1.9
5100
15
EEFCX0G271R
3500
180
4.0
220
270
6.3
330
7.3
4.3
1.9
5100
15
EEFCX0G331R
3500
100
7.3
4.3
1.9
5100
15
EEFCX0J101R
3500
120
7.3
4.3
1.9
5100
15
EEFCX0J121R
3500
7.3
4.3
1.9
5100
15
EEFCX0J151R
3500
150
7.3
4.3
1.9
5600
12
EEFCX0J151XR
3500
180
7.3
4.3
1.9
5100
15
EEFCX0J181R
3500
220
7.3
4.3
1.9
5100
15
EEFCX0J221R
3500
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
*3: Please contact us when 500 pcs packing is necessary.
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
2.0 V to 6.3 V
Coefficient
T ≦ 45 ℃
1.0
45 ℃ < T ≦ 85 ℃
0.7
85 ℃ < T ≦ 105 ℃
0.25
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
25
30-Jun-20
CS/CT/CX series
Characteristics list
■ 10 V to 35 V
Series
Rated
voltage
(V)
10
16
CS
20
25
CT
For replacement
Not Recommended for New Design
Case size (mm)
Specification
Capacitance
Min.
Packaging
Q’ty*3
(pcs)
L
W
H
Ripple
current*1
(mA rms)
ESR*2
(mΩ max.)
47
7.3
4.3
1.1
3200
40
EEFCS1A470R
3500
15
7.3
4.3
1.1
3200
40
EEFCS1C150R
3500
22
7.3
4.3
1.1
3200
40
EEFCS1C220R
3500
33
7.3
4.3
1.1
3200
40
EEFCS1C330R
3500
10
7.3
4.3
1.1
3200
40
EEFCS1D100R
3500
15
7.3
4.3
1.1
3200
40
EEFCS1D150R
3500
(μF)
Part number
22
7.3
4.3
1.1
3200
40
EEFCS1D220R
3500
10
7.3
4.3
1.1
3200
40
EEFCS1E100R
3500
15
7.3
4.3
1.1
3200
40
EEFCS1E150R
3500
35
10
7.3
4.3
1.1
3200
40
EEFCS1V100R
3500
10
68
7.3
4.3
1.4
3200
40
EEFCT1A680R
3500
16
47
7.3
4.3
1.4
3200
40
EEFCT1C470R
3500
33
7.3
4.3
1.4
3200
40
EEFCT1D330R
3500
47
7.3
4.3
1.4
3200
40
EEFCT1D470R
3500
25
22
7.3
4.3
1.4
3200
40
EEFCT1E220R
3500
35
15
7.3
4.3
1.4
3200
40
EEFCT1V150R
3500
47
7.3
4.3
1.9
3200
40
EEFCX1A470R
3500
20
10
16
CX
20
25
35
68
7.3
4.3
1.9
3200
40
EEFCX1A680R
3500
100
7.3
4.3
1.9
3200
40
EEFCX1A101R
3500
15
7.3
4.3
1.9
3200
40
EEFCX1C150R
3500
22
7.3
4.3
1.9
3200
40
EEFCX1C220R
3500
33
7.3
4.3
1.9
3200
40
EEFCX1C330R
3500
47
7.3
4.3
1.9
3200
40
EEFCX1C470R
3500
68
7.3
4.3
1.9
3200
40
EEFCX1C680R
3500
22
7.3
4.3
1.9
3200
40
EEFCX1D220R
3500
33
7.3
4.3
1.9
3200
40
EEFCX1D330R
3500
47
7.3
4.3
1.9
3200
40
EEFCX1D470R
3500
56
7.3
4.3
1.9
3200
40
EEFCX1D560R
3500
15
7.3
4.3
1.9
3200
40
EEFCX1E150R
3500
22
7.3
4.3
1.9
3200
40
EEFCX1E220R
3500
33
7.3
4.3
1.9
3200
40
EEFCX1E330R
3500
15
7.3
4.3
1.9
3200
40
EEFCX1V150R
3500
22
7.3
4.3
1.9
3200
40
EEFCX1V220R
3500
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
*3: Please contact us when 500 pcs packing is necessary.
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
10 V to 35 V
Coefficient
T ≦ 45 ℃
1.0
45 ℃ < T ≦ 85 ℃
0.8
85 ℃ < T ≦ 105 ℃
0.5
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
26
30-Jun-20
Conductive Polymer Aluminum
Electrolytic Capacitors
Surface Mount Type
［Low ESR products］
SX series
Features
● Large capacitance (560 μF max.)
● Low ESR (4.5 mΩ to 9 mΩ max.)
● High ripple current (8500 mA rms max.)
● RoHS compliance, Halogen free
Specifications
Series
SX
Category temp. range
–55 ℃ to +105 ℃
2.0 V to 6.3 V
Rated voltage range
Rated cap. range
82 μF to 560 μF
Capacitance tolerance
±20 % (120 Hz / +20 ℃)
DC leakage current
I ≦ 0.1 CV (μA) 2 minutes
Dissipation factor (tan δ)
≦ 0.06 (120 Hz / + 20 ℃)
Surge voltage (V)
Rated voltage × 1.25 (15 ℃ to 35 ℃)
+105 ℃ 2000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
Endurance
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 3 times of the initial limit
+60 ℃, 90 % RH, 500 h, No-applied voltage
Capacitance change of
initial measurd value
Damp heat
(Steady state)
Dissipation factor (tan δ)
DC leakage current
2.0 V to 2.5 V
4.0 V
6.3 V
+70 %, –20 %
+60 %, –20 %
+50 %, –20 %
≦ 2 times of the initial limit
Within the initial limit
Marking
Dimensions (not to scale)
Polarity bar (Positive)
⊕
⊖
H
Capacitance (μF）
P
P
W1
W2
W2
L
Lot No.
R. voltage code
R. voltage code
Unit：V
Unit：ｍｍ
d
2.0
g
4.0
Series
L±0.2
e
2.5
j
6.3
SX
7.3
W1±0.2 W2±0.1
4.3
2.4
H±0.1
P±0.3
1.9
1.3
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
27
23-Apr-18
SX series
Characteristics list
Series
Rated
voltage
(V)
Case size (mm)
Capacitance
(μF)
180
220
270
330
2.0
390
470
560
150
180
220
270
SX
330
2.5
390
470
82
100
150
4.0
180
220
270
330
120
150
180
220
6.3
Specification
L
W
H
Ripple
current*1
(mA rms)
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
7.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
6300
6300
6300
7500
8500
6300
7500
8500
6300
7500
8500
6300
7500
8500
8500
6300
6300
6300
7000
7000
6300
7500
8500
6300
7500
8500
6300
7500
8500
6300
6300
6300
7000
6300
6300
6300
6300
7500
7000
6300
6300
6300
ESR*2
(mΩ max.)
9
9
9
6
4.5
9
6
4.5
9
6
4.5
9
6
4.5
4.5
9
9
9
7
7
9
6
4.5
9
6
4.5
9
6
4.5
9
9
9
7
9
9
9
9
6
7
9
9
9
Part number
Min.
Packaging
Q’ty*3
(pcs)
EEFSX0D181ER
EEFSX0D221ER
EEFSX0D271ER
EEFSX0D271XE
EEFSX0D271E4
EEFSX0D331ER
EEFSX0D331XE
EEFSX0D331E4
EEFSX0D391ER
EEFSX0D391XE
EEFSX0D391E4
EEFSX0D471ER
EEFSX0D471XE
EEFSX0D471E4
EEFSX0D561E4
EEFSX0E151ER
EEFSX0E181ER
EEFSX0E221ER
EEFSX0E221E7
EEFSX0E271E7
EEFSX0E331ER
EEFSX0E331XE
EEFSX0E331E4
EEFSX0E391ER
EEFSX0E391XE
EEFSX0E391E4
EEFSX0E471ER
EEFSX0E471XE
EEFSX0E471E4
EEFSX0G820ER
EEFSX0G101ER
EEFSX0G151ER
EEFSX0G151E7
EEFSX0G181ER
EEFSX0G221ER
EEFSX0G271ER
EEFSX0G331ER
EEFSX0G331XE
EEFSX0J121E7
EEFSX0J151ER
EEFSX0J181ER
EEFSX0J221ER
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
3500
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
*3: Please contact us when 500 pcs packing is necessary.
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
2.0 V to 6.3 V
Coefficient
T ≦ 45 ℃
1.0
45 ℃ < T ≦ 85 ℃
0.7
85 ℃ < T ≦ 105 ℃
0.25
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
28
23-Apr-18
Conductive Polymer Aluminum
Electrolytic Capacitors
Surface Mount Type
GX/GX-L series ［Super low ESR products］
Features
● Large capacitance (560 μF max.)
● Super Low ESR (3 mΩ max.)
● Low ESL (3-terminals : 50 % less than 2-terminals) [Suffix : L]
● High ripple current (10200 mA rms max.)
● RoHS compliance, Halogen free
Specifications
Series
Category temp. range
Rated voltage range
Rated cap. range
Capacitance tolerance
DC leakage current
Dissipation factor (tan δ)
Surge voltage (V)
Endurance
Damp heat
(Steady state)
GX
–55 ℃ to +105 ℃
2.0 V to 2.5 V
330 μF to 560 μF
±20 % (120 Hz / +20 ℃)
I ≦ 0.1 CV (μA) 2 minutes
≦ 0.06 (120 Hz / + 20 ℃)
Rated voltage × 1.25 (15 ℃ to 35 ℃)
+105 ℃ 2000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
Dissipation factor (tan δ) ≦ 2 times of the initial limit
DC leakage current
≦ 3 times of the initial limit
+60 ℃, 90 % RH, 500 h, No-applied voltage
Capacitance change of
2.0 V to 2.5 V
+70 %, –20 %
initial measurd value
Dissipation factor (tan δ) ≦ 2 times of the initial limit
DC leakage current
Within the initial limit
Marking
Capacitance (μF）
Polarity bar (Positive)
R. voltage code
d
e
Lot No.
Unit：V
2.0
2.5
R. voltage code
Dimensions (not to scale)
⊕
P
L
P
H
⊖
W1
Unit：ｍｍ
2 terminals
W2
W2
L±0.2
7.3
W1±0.2 W2±0.1
4.3
2.4
H±0.1
P±0.3
1.9
1.3
H±0.1
P1±0.3
P2±0.1
P3±0.2
P4±0.2
1.9
1.3
1.1
0.7
1.4
⊕
H
⊖
L
⊖
⊕
W2
P4
W2
3 terminals
Series
GX
P1
P3
P2 P1
W1
Unit：ｍｍ
Series
GX-L
L±0.2
7.3
W1±0.2 W2±0.1
4.3
2.4
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
29
23-Apr-18
GX/GX-L series
Characteristics list
Series
Rated
voltage
(V)
Case size (mm)
Capacitance
(μF)
330
2.0
GX
470
560
330
2.5
470
The number
of terminals
Specification
L
W
H
Ripple
current*1
(mA rms)
7.3
4.3
1.9
10200
3
○
7.3
4.3
1.9
10200
3
○
7.3
4.3
1.9
10200
3
7.3
4.3
1.9
10200
3
7.3
4.3
1.9
10200
3
7.3
4.3
1.9
10200
3
○
7.3
4.3
1.9
10200
3
○
7.3
4.3
1.9
10200
3
ESR*2
(mΩ max.)
2
Part number
3
○
○
○
○
Min.
Packaging
Q’ty*3
(pcs)
EEFGX0D331R
3500
EEFGX0D471R
3500
EEFGX0D471L
3500
EEFGX0D561R
3500
EEFGX0D561L
3500
EEFGX0E331R
3500
EEFGX0E471R
3500
EEFGX0E471L
3500
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
*3: Please contact us when 500 pcs packing is necessary.
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
2.0 V to 2.5 V
Coefficient
T ≦ 45 ℃
1.0
45 ℃ < T ≦ 85 ℃
0.7
85 ℃ < T ≦ 105 ℃
0.25
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
30
23-Apr-18
Conductive Polymer Aluminum
Electrolytic Capacitors
Surface Mount Type
[Low ESR / Low ESL products］
LX series
Features
● Large capacitance (560 μF max.)
● Low ESR (4.5 mΩ, 6 mΩ max.)
● Low ESL (3-terminals : 50 % less than 2-terminals)
● High ripple current (8500 mA rms max.)
● RoHS compliance, Halogen free
Specifications
Series
LX
Category temp. range
Rated voltage range
–55 ℃ to +105 ℃
2.0 V to 2.5 V
Rated cap. range
330 μF to 560 μF
Capacitance tolerance
±20 % (120 Hz / +20 ℃)
DC leakage current
I ≦ 0.1 CV (μA) 2 minutes
Dissipation factor (tan δ)
≦ 0.06 (120 Hz / + 20 ℃)
Surge voltage (V)
Rated voltage × 1.25 (15 ℃ to 35 ℃)
+105 ℃ 2000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
Endurance
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 3 times of the initial limit
+60 ℃, 90 % RH, 500 h, No-applied voltage
2.0 V to 2.5 V
Capacitance change of
initial measurd value
+70 %, –20 %
Damp heat
(Steady state)
Dissipation factor (tan δ)
DC leakage current
Marking
≦ 2 times of the initial limit
Within the initial limit
Dimensions (not to scale)
Capacitance (μF）
Polarity bar (Positive)
3 terminals
⊕
H
⊖
L
⊖
⊕
W2
Lot No.
R. voltage code
R. voltage code
W1
W2
P4
P1
P3
P2 P1
Unit：V
Unit：ｍｍ
d
2.0
Series
L±0.2
e
2.5
LX
7.3
W1±0.2 W2±0.1
4.3
2.4
H±0.1
P1±0.3
P2±0.1
P3±0.2
P4±0.2
1.9
1.3
1.1
0.7
1.4
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
31
29-Nov-16
LX series
Characteristics list
Series
Rated
voltage
(V)
Case size (mm)
Capacitance
(μF)
330
2.0
470
LX
560
330
2.5
470
Specification
Min.
Packaging
Q’ty*3
(pcs)
L
W
H
Ripple
current*1
(mA rms)
7.3
4.3
1.9
7500
6
EEFLX0D331R
3500
7.3
4.3
1.9
8500
4.5
EEFLX0D331R4
3500
7.3
4.3
1.9
7500
6
EEFLX0D471R
3500
7.3
4.3
1.9
8500
4.5
EEFLX0D471R4
3500
7.3
4.3
1.9
7500
6
EEFLX0D561R
3500
7.3
4.3
1.9
8500
4.5
EEFLX0D561R4
3500
7.3
4.3
1.9
7500
6
EEFLX0E331R
3500
7.3
4.3
1.9
8500
4.5
EEFLX0E331R4
3500
7.3
4.3
1.9
7500
6
EEFLX0E471R
3500
7.3
4.3
1.9
8500
4.5
EEFLX0E471R4
3500
ESR*2
(mΩ max.)
Part number
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
*3: Please contact us when 500 pcs packing is necessary.
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
2.0 V to 2.5 V
Coefficient
T ≦ 45 ℃
1.0
45 ℃ < T ≦ 85 ℃
0.7
85 ℃ < T ≦ 105 ℃
0.25
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
32
29-Nov-16
Conductive Polymer Aluminum
Electrolytic Capacitors
Surface Mount Type
SR/LR/SS/LS/ST/LT series
Features
● Low profile (Height 1.0 mm max.)
● Low ESR (4.5 mΩ to 9 mΩ max.)
● Low ESL (3-terminals : 50% less then 2-terminals) [LR/LS/LT series]
● High ripple current (8500 mA rms max.)
● RoHS compliance, Halogen free
Specifications
Series
Category temp. range
Rated voltage range
Rated cap. range
Capacitance tolerance
DC leakage current
Dissipation factor (tan δ)
Surge voltage (V)
Endurance
Damp heat
(Steady state)
SR
LR
SS
2.0 V to 6.3 V
68 μF to 220 μF
LS
–55 ℃ to +105 ℃
ST
LT
2.0 V to 2.5 V
180 μF to 220 μF
270 μF to 330 μF
±20 % (120 Hz / +20 ℃)
I ≦ 0.1 CV (μA) 2 minutes
≦ 0.06 (120 Hz / + 20 ℃)
Rated voltage × 1.25 (15 ℃ to 35 ℃)
+105 ℃ 2000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
Dissipation factor (tan δ) ≦ 2 times of the initial limit
DC leakage current
≦ 3 times of the initial limit
+60 ℃, 90 % RH, 500 h, No-applied voltage
Capacitance change of
2.0 V to 2.5 V
4.0 V
6.3 V
+70 %, –20 %
+60 %, –20 %
+50 %, –20 %
initial measurd value
Dissipation factor (tan δ) ≦ 2 times of the initial limit
DC leakage current
Within the initial limit
Marking
Capacitance (μF）
Polarity bar (Positive)
R. voltage code
d
e
g
j
Lot No.
Unit：V
2.0
2.5
4.0
6.3
R. voltage code
Dimensions (not to scale)
⊕
SR/SS/ST series
H
⊖
P
L
W1
W2
W2
2 terminals
P
Unit：ｍｍ
Series
SR
SS
ST
L±0.2
7.3
7.3
7.3
W1±0.2 W2±0.1
4.3
4.3
4.3
2.4
2.4
2.4
H±0.1
1.0*1
1.1
1.4
P±0.3
1.3
1.3
1.3
*1:max.
⊕
L
⊖
⊕
W2
P4
W2
3 terminals
LR/LS/LT series
H
⊖
W1
Unit：ｍｍ
Series
LR
LS
LT
L±0.2
7.3
7.3
7.3
W1±0.2 W2±0.1
4.3
4.3
4.3
2.4
2.4
2.4
H±0.1
1.0*1
1.1
1.4
P1±0.3
P2±0.1
P3±0.2
P4±0.2
1.3
1.3
1.3
1.1
1.1
1.1
0.7
0.7
0.7
1.4
1.4
1.4
*1:max.
P1
P3
P2 P1
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
33
29-Nov-16
SR/LR/SS/LS/ST/LT series
Characteristics list
Series
Rated
voltage
(V)
2.0
SR
SS
LS
ST
LT
Capacitance
(μF)
220
The number
of terminals
Specification
L
W
H
Ripple
current*1
(mA rms)
7.3
4.3
1.0 max.
7500
6
○
7.3
4.3
1.0 max.
8500
4.5
7.3
4.3
1.0 max.
7500
6
ESR*2
(mΩ max.)
2
Part number
3
Min.
Packaging
Q’ty*3
(pcs)
EEFSR0D221R
3500
○
EEFSR0D221R4
3500
○
EEFSR0E181R
3500
2.5
180
7.3
4.3
1.0 max.
8500
4.5
○
EEFSR0E181R4
3500
4.0
120
7.3
4.3
1.0 max.
6300
9
○
EEFSR0G121R
3500
6.3
68
7.3
4.3
1.0 max.
6300
9
○
EEFSR0J680R
3500
7.3
4.3
1.0 max.
7500
6
○
EEFLR0D221R
3500
7.3
4.3
1.0 max.
8500
4.5
○
EEFLR0D221R4
3500
7.3
4.3
1.0 max.
7500
6
○
EEFLR0E181R
3500
2.0
LR
Case size (mm)
220
2.5
180
7.3
4.3
1.0 max.
8500
4.5
○
EEFLR0E181R4
3500
4.0
120
7.3
4.3
1.0 max.
6300
9
○
EEFLR0G121R
3500
6.3
68
7.3
4.3
1.0 max.
6300
9
2.0
220
7.3
4.3
1.1
7500
6
2.5
180
7.3
4.3
1.1
7500
6
2.0
220
7.3
4.3
1.1
7500
6
2.5
180
7.3
4.3
1.1
7500
6
2.0
330
7.3
4.3
1.4
7500
6
2.5
270
7.3
4.3
1.4
7500
6
2.0
330
7.3
4.3
1.4
7500
6
2.5
270
7.3
4.3
1.4
7500
6
EEFLR0J680R
3500
○
EEFSS0D221R
3500
○
EEFSS0E181R
3500
○
EEFLS0D221R
3500
○
EEFLS0E181R
3500
○
EEFST0D331R
3500
○
EEFST0E271R
3500
○
EEFLT0D331R
3500
○
EEFLT0E271R
3500
○
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
*3: Please contact us when 500 pcs packing is necessary.
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
2.0 V to 6.3 V
Coefficient
T ≦ 45 ℃
1.0
45 ℃ < T ≦ 85 ℃
0.7
85 ℃ < T ≦ 105 ℃
0.25
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
34
29-Nov-16
Conductive Polymer Aluminum
Electrolytic Capacitors
Surface Mount Type
［Super low ESR］
GY series
Features
● Super low ESR (3 mΩ max.)
● Large capacitance (820 μF max.)
● High ripple current (10200 mA rms max.)
● RoHS compliance, Halogen free
Specifications
Series
Category temp. range
Rated voltage range
Rated cap. range
Capacitance tolerance
DC leakage current
Dissipation factor (tan δ)
Surge voltage (V)
Endurance
Damp heat
(Steady state)
GY
–55 ℃ to +105 ℃
2.0 V to 2.5 V
680 μF to 820 μF
±20 % (120 Hz / +20 ℃)
I ≦ 0.1 CV (μA) 2 minutes
≦ 0.06 (120 Hz / + 20 ℃)
Rated voltage × 1.25 (15 ℃ to 35 ℃)
+105 ℃ 2000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
Dissipation factor (tan δ) ≦ 2 times of the initial limit
DC leakage current
≦ 3 times of the initial limit
+60 ℃, 90 % RH, 500 h, No-applied voltage
Capacitance change of
2.0 V to 2.5 V
+70 %, –20 %
initial measurd value
Dissipation factor (tan δ) ≦ 2 times of the initial limit
DC leakage current
Within the initial limit
Dimensions (not to scale)
Polarity bar (Positive)
R. voltage code
R. voltage code
d
e
⊕
P
L
P
Unit：V
2.0
2.5
Series
GY
W1
W2
Lot No.
⊖
W2
Capacitance (μF）
H
Marking
L±0.2
7.3
W1±0.2 W2±0.1
4.3
2.4
H±0.2
2.8
Unit：ｍｍ
P±0.3
1.3
✽ Externals of figure are the reference.
Characteristics list
Specification
Case size (mm)
Series
Rated
voltage
(V)
Capacitance
(μF)
L
W
H
GY
2.0
2.5
820
680
7.3
7.3
4.3
4.3
2.8
2.8
Ripple
current*1
(mA rms)
10200
10200
ESR*2
(mΩ max.)
3
3
Part number
EEFGY0D821R
EEFGY0E681R
Min.
Packaging
Q’ty
(pcs)
2000
2000
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
Coefficient
2.0 V to 2.5 V
T ≦ 45 ℃
1.0
45 ℃ < T ≦ 85 ℃
0.7
85 ℃ < T ≦ 105 ℃
0.25
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
35
01-Oct-19
Conductive Polymer Aluminum
Electrolytic Capacitors
Surface Mount Type
［Guaranteed at 85 ℃］
CY/SY series
Features
● Endurance 85 ℃ 2000 h
● Product height (3.0 mm max.)
● High ripple current (5100 mA rms to 6300 mA rms max.)
● RoHS compliance, Halogen free
Specifications
Series
CY / SY
Category temp. range
–55 ℃ to +85 ℃
4.0 V, 6.3V
Rated voltage range
Rated cap. range
330 μF to 470 μF
Capacitance tolerance
±20 % (120 Hz / +20 ℃)
DC leakage current
I ≦ 0.1 CV (μA) 2 minutes
Dissipation factor (tan δ)
≦ 0.06 (120 Hz / + 20 ℃)
Surge voltage (V)
Rated voltage × 1.25 (15 ℃ to 35 ℃)
+85 ℃ 2000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
Endurance
Dissipation factor (tan δ)
≦ 2 times of the initial limit
DC leakage current
≦ 3 times of the initial limit
+60 ℃, 90 % RH, 500 h, No-applied voltage
4.0 V
Capacitance change of
initial measurd value
+60 %, –20 %
Damp heat
(Steady state)
Dissipation factor (tan δ)
DC leakage current
6.3 V
+50 %, –20 %
≦ 2 times of the initial limit
Within the initial limit
Marking
Dimensions (not to scale)
Polarity bar (Positive)
⊕
⊖
H
Capacitance (μF）
P
P
W1
W2
Lot No.
R. voltage code
R. voltage code
W2
L
Unit：ｍｍ
Unit：V
g
4.0
Series
L±0.2
j
6.3
CY / SY
7.3
W1±0.2 W2±0.1
4.3
2.4
H±0.2
P±0.3
2.8
1.3
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
36
07-Jul-17
CY/SY series
Characteristics list
Series
CY
SY
Specification
Case size (mm)
Rated
voltage
(V)
Capacitance
(μF)
4.0
Min.
Packaging
Q’ty*3
(pcs)
L
W
H
Ripple
current*1
(mA rms)
470
7.3
4.3
2.8
5100
15
ECGCY0G471R
2000
6.3
330
7.3
4.3
2.8
5100
15
ECGCY0J331R
2000
4.0
470
7.3
4.3
2.8
6300
9
ECGSY0G471R
2000
6.3
330
7.3
4.3
2.8
6300
9
ECGSY0J331R
2000
ESR*2
(mΩ max.)
Part number
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
*3: Please contact us when 500 pcs packing is necessary.
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
4.0 V to 6.3 V
Coefficient
T ≦ 45 ℃
1.0
45 ℃ < T ≦ 65 ℃
0.7
65 ℃ < T ≦ 85 ℃
0.25
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
37
07-Jul-17
Conductive Polymer Aluminum
Electrolytic Capacitors
Surface Mount Type
［Guaranteed at 125 ℃］
HX series
Features
● Endurance 125 ℃ 1000 h
・2, 2.5 V : On sale
● High voltage & Large capacitance
(2.0 V / 560 μF to 25 V / 33 μF)
・ 10 to 25 V : Not recommended for new design
※ Click
● Low ESR (4.5 mΩ max.)
● RoHS compliance, Halogen free
here for Replacement (10 to 25 V)
Specifications
Series
HX
Category temp. range
Rated voltage range
–55 ℃ to +125 ℃
2.0 V to 2.5 V, 10 V to 25 V
Category voltage range
1.6 V to 2.0 V, 8.0 V to 20 V
Rated cap. range
15 μF to 470 μF
Capacitance tolerance
±20 % (120 Hz / +20 ℃)
DC leakage current
I ≦ 0.1 CV(μA) [2.0 V to 2.5 V, 2 min], I ≦ 0.3 CV(μA) [10 V to 25 V, 2 min]
Dissipation factor (tan δ)
≦ 0.1 (120 Hz / + 20 ℃)
Surge voltage (V)
Rated voltage × 1.25 [2.0 V to 16 V], × 1.15 [20 V to 25 V] (15 ℃ to 35 ℃)
+125 ℃ 1000 h, category voltage applied
Capacitance change
Within ±20 % of the initial value
Endurance
Dissipation factor (tan δ)
DC leakage current
≦ 2 times of the initial limit
Within the initial limit
After storing for 500 hours at +60 ℃, 90 % RH
2.0 V to 2.5 V
Capacitance change
of initial measurd value
+70 %, –20 %
Damp heat
(Steady state)
Dissipation factor (tan δ)
DC leakage current
10 V to 25 V
+60 %, –20 %
≦ 2 times of the initial limit
Within the initial limit : 2.0 V to 2.5 V
≦ 3 times of the initial limit : 10 V to 25 V
Marking
Dimensions (not to scale)
Polarity bar (Positive)
⊕
⊖
H
Capacitance (μF）
P
P
W1
W2
Lot No.
R. voltage code
R. voltage code
W2
L
Unit：V
d
2.0
C
16
e
2.5
D
20
Series
L±0.2
A
10
E
25
HX
7.3
Unit：ｍｍ
W1±0.2 W2±0.1
4.3
2.4
H±0.1
P±0.3
1.9
1.3
✽ Externals of figure are the reference.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
38
15-Jan-21
HX series
Characteristics list
■ 2.0 V to 2.5 V
Series
Rated
voltage
[105 ℃]
(V)
Category
voltage
[125 ℃]
(V)
2.0
1.6
Case size (mm)
Capacitance
(μF)
470
HX
2.5
2.0
330
W
H
Ripple
current*1
(mA rms)
ESR*2
(mΩ max.)
7.3
4.3
1.9
5100
15
EEFHX0D471R
3500
7.3
4.3
1.9
6300
9
EEFHX0D471R9
3500
6
EEFHX0D471R6
3500
Category
voltage
[125 ℃]
(V)
10
8.0
16
12.8
HX
20
16
25
20
Part number
7.3
4.3
1.9
7500
7.3
4.3
1.9
8500
4.5
EEFHX0D471R4
3500
15
EEFHX0E331R
3500
7.3
4.3
1.9
5100
7.3
4.3
1.9
6300
9
EEFHX0E331R9
3500
7.3
4.3
1.9
7500
6
EEFHX0E331R6
3500
7.3
4.3
1.9
8500
4.5
EEFHX0E331R4
3500
Not Recommended for New Design
Rated
voltage
[105 ℃]
(V)
Min.
Packaging
Q’ty*3
(pcs)
L
■ 10 V to 25 V
Series
Specification
Case size (mm)
For replacement
Specification
Capacitance
Min.
Packaging
Q’ty*3
(pcs)
L
W
H
Ripple
current*1
(mA rms)
ESR*2
(mΩ max.)
47
7.3
4.3
1.9
3200
40
EEFHX1A470R
3500
68
7.3
4.3
1.9
3200
40
EEFHX1A680R
3500
100
7.3
4.3
1.9
3200
40
EEFHX1A101R
3500
15
7.3
4.3
1.9
3200
40
EEFHX1C150R
3500
22
7.3
4.3
1.9
3200
40
EEFHX1C220R
3500
33
7.3
4.3
1.9
3200
40
EEFHX1C330R
3500
47
7.3
4.3
1.9
3200
40
EEFHX1C470R
3500
68
7.3
4.3
1.9
3200
40
EEFHX1C680R
3500
22
7.3
4.3
1.9
3200
40
EEFHX1D220R
3500
33
7.3
4.3
1.9
3200
40
EEFHX1D330R
3500
47
7.3
4.3
1.9
3200
40
EEFHX1D470R
3500
56
7.3
4.3
1.9
3200
40
EEFHX1D560R
3500
15
7.3
4.3
1.9
3200
40
EEFHX1E150R
3500
22
7.3
4.3
1.9
3200
40
EEFHX1E220R
3500
33
7.3
4.3
1.9
3200
40
EEFHX1E330R
3500
(μF)
Part number
*1: Ripple current (100 kHz / +45 ℃)
*2: ESR (100 kHz / +20 ℃)
*3: Please contact us when 500 pcs packing is necessary.
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
Temperature coefficient of ripple current
Temperature
2.0 V to 2.5 V
10 V to 25 V
Coefficient
T ≦ 45 ℃
1.0
1.0
45 ℃ < T ≦ 85 ℃
0.7
0.8
85 ℃ < T ≦ 105 ℃
0.25
0.5
105 ℃ < T ≦ 125 ℃
0.25
0.25
◆ Ripple current should be controlled so that surface temperature of capacitor does not exceed the category temperature.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
39
15-Jan-21
Conductive Polymer Aluminum Electrolytic Capacitors
Replacement list for “Not recommended for new design”
＊If you are using any of the following models on the deleted list,
please substitute them with the suggested alternative model as soon as possible.
Non-recommended part number
Series
Cate-gory
temp.
range
max.
(℃)
Rated
voltage
(V)
Capacitance
(μF)
ESR
(mΩ)
Part number
105
10
47
40
EEFCS1A470R
105
16
15
40
EEFCS1C150R
105
16
22
40
EEFCS1C220R
105
16
33
40
EEFCS1C330R
105
20
10
40
EEFCS1D100R
105
20
15
40
EEFCS1D150R
105
20
22
40
EEFCS1D220R
105
25
10
40
EEFCS1E100R
105
25
15
40
EEFCS1E150R
105
35
10
40
EEFCS1V100R
105
10
68
40
EEFCT1A680R
105
16
47
40
EEFCT1C470R
105
20
33
40
EEFCT1D330R
105
20
47
40
EEFCT1D470R
105
25
22
40
EEFCT1E220R
105
35
15
40
EEFCT1V150R
CS
CT
Replacement part number
Series
POSCAP TQC
POSCAP TPG
OS-CON SVP
Hybrid ZA
POSCAP TQC
OS-CON SVP
Hybrid ZA
POSCAP TQC
OS-CON SVP
Hybrid ZA
POSCAP TQC
OS-CON SVPC
Hybrid ZA
POSCAP TQC
OS-CON SVPA
Hybrid ZA
POSCAP TQC
OS-CON SVPB
Hybrid ZA
POSCAP TQC
OS-CON SVPA
Hybrid ZA
POSCAP TQC
POSCAP TQC
OS-CON SVPD
Hybrid ZA
POSCAP TQC
POSCAP TQC
OS-CON SVPG
Hybrid ZA
POSCAP TQC
OS-CON SVPK
Hybrid ZA
POSCAP TQC
POSCAP TPE
OS-CON SVPC
Hybrid ZA
Hybrid ZA
POSCAP TQC
OS-CON SVPG
Hybrid ZA
POSCAP TQC
OS-CON SVPG
Hybrid ZA
POSCAP TQC
OS-CON SVPF
Hybrid ZA
POSCAP TQC
POSCAP TQC
OS-CON SVPF
Hybrid ZA
POSCAP TQC
OS-CON SVPK
Hybrid ZA
Size
code
Cate-gory
temp.
range
max.
(℃)
Rated
voltage
(V)
Capacitance
(μF)
ESR
(mΩ)
D12
B1G
C6
D
D12
B6
C
D12
B6
C
D12
B6
C
D15
B6
C
D15
C5
C
D15
C6
C
D15
D2
C6
C
D15
D2
B45
C
D2
B6
C
D15
D2E
B6
D8
D8
D15
B45
D
D15
B45
C
D15
C6
D
D15
D2
B6
C
D2
B6
C
105
85
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
125
105
105
105
105
105
105
125
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
125
105
16
10
10
25
16
16
25
16
16
25
16
16
25
20
20
35
20
20
25
20
20
25
25
25
25
35
25
25
25
25
35
35
35
16
10
10
25
35
16
16
25
20
20
25
20
25
25
25
25
25
25
35
35
35
33
47
47
47
33
22
22
33
22
22
33
39
33
47
10
10
47
15
22
47
22
22
22
15
10
10
22
15
15
22
10
22
10
47
68
68
68
68
47
47
47
47
33
33
47
47
47
22
22
27
22
15
22
22
40
70
50
50
40
90
80
40
90
80
40
27
80
55
40
100
55
45
80
55
35
80
70
45
65
100
70
45
30
80
120
35
100
55
25
30
30
35
55
25
50
55
27
80
55
30
50
70
45
40
80
150
35
100
Part number
16TQC33MYFS
10TPG47M
10SVP47M
EEHZA1E470P
16TQC33MYFS
16SVP22M
EEHZA1E220R
16TQC33MYFS
16SVP22M
EEHZA1E220R
16TQC33MYFS
16SVPC39MV
EEHZA1E330R
20TQC47MYFT
20SVPA10M
EEHZA1V100R
20TQC47MYFT
20SVPB15M
EEHZA1E220R
20TQC47MYFT
20SVPA22M
EEHZA1E220R
25TQC22MYFT
25TQC15MV
25SVPD10M
EEHZA1V100R
25TQC22MYFT
25TQC15MV
25SVPG15M
EEHZA1E220R
35TQC10MYF
35SVPK22M
EEHZA1V100R
16TQC47MYFT
10TPE68M
10SVPC68M
EEHZA1E680XP
EEHZA1V680XP
16TQC47MYFT
16SVPG47M
EEHZA1E470P
20TQC47MYFT
20SVPG33M
EEHZA1E330R
20TQC47MYFT
25SVPF47M
EEHZA1E470P
25TQC22MYFT
25TQC22MV
25SVPF27MX
EEHZA1E220R
35TQC15MYF
35SVPK22M
EEHZA1V220R
03-Jul-20
40
Conductive Polymer Aluminum Electrolytic Capacitors
Replacement list for “Not recommended for new design”
＊If you are using any of the following models on the deleted list,
please substitute them with the suggested alternative model as soon as possible.
Non-recommended part number
Series
Cate-gory
temp.
range
max.
(℃)
Rated
voltage
(V)
Capacitance
(μF)
ESR
(mΩ)
Part number
105
10
100
40
EEFCX1A101R
105
10
47
40
EEFCX1A470R
105
10
68
40
EEFCX1A680R
105
16
15
40
EEFCX1C150R
105
16
22
40
EEFCX1C220R
105
16
33
40
EEFCX1C330R
105
16
47
40
EEFCX1C470R
105
16
68
40
EEFCX1C680R
105
20
22
40
EEFCX1D220R
105
20
33
40
EEFCX1D330R
105
20
47
40
EEFCX1D470R
105
20
56
40
EEFCX1D560R
105
25
15
40
EEFCX1E150R
105
25
22
40
EEFCX1E220R
105
25
33
40
EEFCX1E330R
105
35
15
40
EEFCX1V150R
105
35
22
40
EEFCX1V220R
CX
Replacement part number
Series
POSCAP TPC
OS-CON SVPC
Hybrid ZA
POSCAP TPE
POSCAP TPE
OS-CON SVP
Hybrid ZA
POSCAP TPE
POSCAP TQC
OS-CON SVPC
Hybrid ZA
Hybrid ZA
POSCAP TQC
POSCAP TQC
OS-CON SVP
Hybrid ZA
POSCAP TQC
POSCAP TQC
OS-CON SVP
Hybrid ZA
POSCAP TQC
POSCAP TQC
OS-CON SVPC
Hybrid ZA
POSCAP TQC
OS-CON SVPG
Hybrid ZA
POSCAP TQC
POSCAP TQC
OS-CON SVPC
Hybrid ZA
Hybrid ZA
POSCAP TQC
POSCAP TQC
OS-CON SVPA
Hybrid ZA
POSCAP TQC
POSCAP TQC
OS-CON SVPG
Hybrid ZA
POSCAP TQC
OS-CON SVPF
Hybrid ZA
POSCAP TQC
OS-CON SVPF
Hybrid ZA
POSCAP TQC
POSCAP TQC
OS-CON SVPF
Hybrid ZA
POSCAP TQC
OS-CON SVPF
Hybrid ZA
POSCAP TQC
OS-CON SVPK
Hybrid ZA
POSCAP TQC
OS-CON SVPK
Hybrid ZA
POSCAP TQC
OS-CON SVPK
Hybrid ZA
41
Size
code
Cate-gory
temp.
range
max.
(℃)
Rated
voltage
(V)
Capacitance
(μF)
ESR
(mΩ)
D2
C6
D8
D2E
B2
C6
D
D2E
D2
B6
D8
D8
D2
B2
B6
C
D2
B2
B6
C
D2
B2
B6
C
D2
B45
D
D2
D2
C6
D8
D8
D2
B2
C6
C
D2
D2
B45
C
D15
C6
D
D2
B6
C
D2
B2
B45
C
D2
B6
C
D2
B6
C
D2
B6
C
D2
B6
C
105
105
105
105
85
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
105
125
105
105
125
105
105
125
105
10
10
25
10
10
10
25
10
16
10
25
35
16
16
16
25
16
16
16
25
16
16
16
25
16
16
25
16
16
16
25
35
20
20
20
25
20
20
20
25
20
25
25
20
20
25
25
25
25
25
25
25
25
25
25
25
35
35
35
35
35
35
100
120
100
68
47
47
47
68
68
68
68
68
47
15
22
22
47
22
22
22
47
33
39
33
47
47
47
68
100
68
68
68
33
22
22
22
33
47
33
33
47
47
47
100
56
56
15
15
15
22
22
27
22
33
33
33
15
22
22
15
22
22
45
22
30
25
35
50
50
25
50
23
30
35
40
90
90
80
40
90
90
80
40
90
27
80
40
25
50
50
50
25
30
35
60
90
35
80
60
55
27
80
55
30
50
100
30
50
45
100
30
80
45
40
80
60
35
80
150
35
100
150
35
100
Part number
10TPC100M
10SVPC120MV
EEHZA1E101XP
10TPE68M
10TPE47MAZB
10SVP47M
EEHZA1E470P
10TPE68M
16TQC68MYF
10SVPC68MV
EEHZA1E680XP
EEHZA1V680XP
16TQC47MW
16TQC15M
16SVP22M
EEHZA1E220R
16TQC47MW
16TQC22MYFB
16SVP22M
EEHZA1E220R
16TQC47MW
16TQC33MYFB
16SVPC39MV
EEHZA1E330R
16TQC47MW
16SVPG47M
EEHZA1E470P
16TQC68MYF
16TQC100MYF
16SVPC68MV
EEHZA1E680XP
EEHZA1V680XP
20TQC33MYFD
20TQC22MYFB
20SVPA22M
EEHZA1E220R
20TQC33MYFD
20TQC47MYF
20SVPG33M
EEHZA1E330R
20TQC47MYFT
25SVPF47M
EEHZA1E470P
20TQC100MD2
20SVPF56MX
EEHZA1E560P
25TQC15MV
25TQC15MYFB
25SVPG15M
EEHZA1E220R
25TQC22MV
25SVPF27MX
EEHZA1E220R
25TQC33MYF
25SVPK33M
EEHZA1E330R
35TQC15MYF
35SVPK22M
EEHZA1V220R
35TQC15MYF
35SVPK22M
EEHZA1V220R
03-Jul-20
Conductive Polymer Aluminum Electrolytic Capacitors
Replacement list for “Not recommended for new design”
＊If you are using any of the following models on the deleted list,
please substitute them with the suggested alternative model as soon as possible.
Non-recommended part number
Series
HX
Cate-gory
temp.
range
max.
(℃)
Rated
voltage
(V)
Capacitance
(μF)
ESR
(mΩ)
Part number
125
10
47
40
EEFHX1A470R
125
10
68
40
EEFHX1A680R
125
10
100
40
EEFHX1A101R
125
16
15
40
EEFHX1C150R
125
16
22
40
EEFHX1C220R
125
16
33
40
EEFHX1C330R
125
16
47
40
EEFHX1C470R
125
16
68
40
EEFHX1C680R
125
20
22
40
EEFHX1D220R
125
20
33
40
EEFHX1D330R
125
20
47
40
EEFHX1D470R
125
20
56
40
EEFHX1D560R
125
25
15
40
EEFHX1E150R
125
25
22
40
EEFHX1E220R
125
25
33
40
EEFHX1E330R
Replacement part number
Series
POSCAP TDC
POSCAP THC
OS-CON SVPD
Hybrid ZC
POSCAP TDC
POSCAP THC
OS-CON SVPK
Hybrid ZC
POSCAP TDC
POSCAP TCF
OS-CON SVPK
Hybrid ZC
POSCAP TDC
POSCAP TDC
Hybrid ZC
POSCAP TDC
POSCAP TDC
OS-CON SVPK
Hybrid ZC
POSCAP TDC
POSCAP TDC
OS-CON SVPK
Hybrid ZC
POSCAP TDC
OS-CON SVPK
Hybrid ZC
POSCAP TDC
OS-CON SVF
Hybrid ZC
POSCAP TDC
OS-CON SVPK
Hybrid ZC
OS-CON SVPK
Hybrid ZC
OS-CON SVPK
Hybrid ZC
OS-CON SVF
Hybrid ZC
POSCAP TDC
POSCAP TDC
OS-CON SPF
Hybrid ZC
POSCAP TDC
OS-CON SVF
Hybrid ZC
POSCAP TDC
OS-CON SVPK
Hybrid ZC
42
Size
code
Cate-gory
temp.
range
max.
(℃)
Rated
voltage
(V)
Capacitance
(μF)
ESR
(mΩ)
D2
D2
C6
D
D2
D2
B6
D8
D2
D3L
B6
D8
D2
B2
C
D2
B2
B6
C
D2
B2
B6
C
D2
C6
D
D2
B6
D8
B2
B6
C
B6
C
C6
D
B6
D
D3L
B2
B6
C
D3L
B6
C
D3L
B6
C
125
105
125
125
125
105
125
125
125
105
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
125
16
10
10
25
16
10
20
25
16
10
16
25
16
16
25
16
16
35
25
16
16
25
25
16
35
25
16
16
25
20
35
25
25
25
35
25
20
25
25
25
25
25
25
25
25
25
25
25
100
68
56
47
100
68
68
68
100
150
100
100
100
33
22
100
33
22
22
100
33
33
33
100
47
47
100
82
68
22
22
22
33
33
47
47
56
56
68
15
27
22
68
27
22
68
33
33
50
45
45
50
50
45
30
30
50
15
27
30
50
90
80
50
90
35
80
50
90
35
80
50
27
50
50
27
30
90
35
80
35
80
27
50
30
50
70
100
40
80
70
40
80
70
35
80
Part number
16TDC100MYF
10THC68M
10SVPD56M
EEHZC1E470P
16TDC100MYF
10THC68M
20SVPK68M
EEHZC1E680XP
16TDC100MYF
10TCF150ML
16SVPK100M
EEHZC1E101XP
16TDC100MYF
16TDC33MYFB
EEHZC1E220R
16TDC100MYF
16TDC33MYFB
35SVPK22M
EEHZC1E220R
16TDC100MYF
16TDC33MYFB
25SVPK33M
EEHZC1E330R
16TDC100MYF
35SVPK47M
EEHZC1E470P
16TDC100MYF
16SVF82M
EEHZC1E680XP
20TDC22MYFB
35SVPK22M
EEHZC1E220R
25SVPK33M
EEHZC1E330R
35SVPK47M
EEHZC1E470P
20SVF56M
EEHZC1E560P
25TDC68MYF
25TDC15MYFB
25SVF27M
EEHZC1E220R
25TDC68MYF
25SVF27M
EEHZC1E220R
25TDC68MYF
25SVPK33M
EEHZC1E330R
03-Jul-20
Safty Precautions
When using our products, no matter what sort of equipment they might be used for,
be sure to confirm the applications and environmental conditions with our specifications in advance.
Device Solutions Business Division
1006 Kadoma, Kadoma City, Osaka
571-8506 Japan
© Panasonic Industry
6OBVUIPSJ[FEEVQMJDBUJPOPGUIJTDBUBMPHJTTUSJDUMZGPSCJEEFO
5IFDPOUFOUTPGDBUBMPHBSFBTPG0DUPCFS
工商网监
湘ICP备2023018690号
