EETED2W820BA

Aluminum Electrolytic Capacitors/ ED Snap-in Type Series: ED Type : TS Country of Origin ■ Features Endurance : 105°C 2000h Japan High ripple current capability in range of high frequency. High ripple current and miniaturization to help miniaturization of equipment. U.S.A Malaysia ■ Specifications Category temp. range -40 to +105°C 200,220,250 V.DC 220 to 2200 µF Rated W.V. Range Nominal Cap. Range Capacitance Tolerance -25 to + 105°C 400, 420, 450 V .DC 56 to 560 µ F ±20 % (120Hz/+20°C) 3√CV (µA) max. after 5 minutes application of rated working voltage at +20°C C:Capacitance(µF) V: W.V. (V.DC) DC Leakage Current tan δ Frequency Correction Factor for Ripple Current Please see the attached standard products list Frequency (Hz) 50 60 100 120 500 1k 10k to Correction Factor 0.5 0.55 0.68 0.70 0.85 0.90 1.00 After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage) at +105°C, the capacitor shall meet the following limits. Capacitance change ±20 % of initial measured value tan δ < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000hours at +105±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in “Endurance”.(With voltage treatment) Endurance Shelf Life ■ Dimensions in mm (not to scale) (10.0) 2-φ2.0±0.1 φD+1.0 max Polarity bar 10.0±0.1 Sleeve Vent L+2.0 max Recommended PWB piercing plan ❉ +0.2 0.8 - 0.1 2.0 max Terminal (t= 0.8) (3.5) 4.0±0.5 ❉ Top of spin 1.5 ± 0.2 Standard terminal type does not require for cutting off process for terminals. ❉ 6.3 mm is available upon request. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety consern arise regarding this product,please be sure to contact us immediately. Ñ EE172 Ñ Aluminum Electrolytic Capacitors/ ED ■ Standard Products W.V. Cap. (±20%) (V) (µF) (mm) (50kHz) (120Hz) (+105°C) (+20°C) (mm) (A) Part No. Part No. PVC sleeve Terminal Length PET sleeve Terminal Length (WithoutP.V.C.plate) (Without P.V.C.plate) 4.0mm 4.0mm Min.PackagingQ'ty (pcs) 270 22 25 2.03 0.15 EETED2D271H EETED2D271HJ 200 330 22 30 2.23 0.15 EETED2D331H EETED2D331HJ 200 390 22 30 2.44 0.15 EETED2D391H EETED2D391HJ 200 25 25 2.44 0.15 EETED2D391J EETED2D391JJ 200 470 22 35 2.64 0.15 EETED2D471H EETED2D471HJ 200 25 30 2.64 0.15 EETED2D471J EETED2D471JJ 200 22 40 3.05 0.15 EETED2D561H EETED2D561HJ 200 25 30 3.05 0.15 EETED2D561J EETED2D561JJ 200 560 680 200 820 1000 1200 1500 220 Specification Case size Ripple Dia. Length current tan δ 30 25 3.05 0.15 EETED2D561K EETED2D561KJ 200 22 45 3.45 0.15 EETED2D681H EETED2D681HJ 200 25 35 3.45 0.15 EETED2D681J EETED2D681JJ 200 30 30 3.45 0.15 EETED2D681K EETED2D681KJ 200 22 50 3.76 0.15 EETED2D821H EETED2D821HJ 200 25 40 3.76 0.15 EETED2D821J EETED2D821JJ 200 30 30 3.76 0.15 EETED2D821K EETED2D821KJ 200 35 25 3.76 0.15 EETED2D821L EETED2D821LJ 200 25 45 4.06 0.15 EETED2D102J EETED2D102JJ 200 30 35 4.06 0.15 EETED2D102K EETED2D102KJ 100 35 30 4.06 0.15 EETED2D102L EETED2D102LJ 200 30 40 4.47 0.15 EETED2D122K EETED2D122KJ 100 35 35 4.47 0.15 EETED2D122L EETED2D122LJ 100 30 50 5.08 0.15 EETED2D152K EETED2D152KJ 100 35 40 5.08 0.15 EETED2D152L EETED2D152LJ 100 1800 35 45 5.48 0.15 EETED2D182L EETED2D182LJ 100 2200 35 50 5.89 0.15 EETED2D222L EETED2D222LJ 100 270 22 30 2.03 0.15 EETED2Q271H EETED2Q271HJ 200 330 22 30 2.23 0.15 EETED2Q331H EETED2Q331HJ 200 25 25 2.23 0.15 EETED2Q331J EETED2Q331JJ 200 390 22 35 2.44 0.15 EETED2Q391H EETED2Q391HJ 200 25 30 2.44 0.15 EETED2Q391J EETED2Q391JJ 200 470 22 40 2.64 0.15 EETED2Q471H EETED2Q471HJ 200 25 30 2.64 0.15 EETED2Q471J EETED2Q471JJ 200 30 25 2.64 0.15 EETED2Q471K EETED2Q471KJ 200 22 45 3.05 0.15 EETED2Q561H EETED2Q561HJ 200 22 35 3.05 0.15 EETED2Q561J EETED2Q561JJ 200 560 680 820 30 30 3.05 0.15 EETED2Q561K EETED2Q561KJ 200 25 40 3.45 0.15 EETED2Q681J EETED2Q681JJ 200 30 30 3.45 0.15 EETED2Q681K EETED2Q681KJ 200 35 25 3.45 0.15 EETED2Q681L EETED2Q681LJ 200 25 45 3.76 0.15 EETED2Q821J EETED2Q821JJ 200 30 35 3.76 0.15 EETED2Q821K EETED2Q821KJ 100 Endurance : 105°C 2000h Terminal Pitch : 10mm When capacitors of φ35×45L and φ35×50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety consern arise regarding this product,please be sure to contact us immediately. Ñ EE173 Ñ Aluminum Electrolytic Capacitors/ ED ■ Standard Products W.V. Cap. (±20%) (V) (µF) 820 1000 220 1200 1500 (mm) 35 (50kHz) (120Hz) (+105°C) (+20°C) (mm) (A) 30 3.76 0.15 Part No. Part No. PVC sleeve Terminal Length PET sleeve Terminal Length 4.0mm (WithoutP.V.C.plate) EETED2Q821L 4.0mm (Without P.V.C.plate) EETED2Q821LJ Min.PackagingQ'ty (pcs) 200 30 40 4.06 0.15 EETED2Q102K EETED2Q102KJ 100 35 35 4.06 0.15 EETED2Q102L EETED2Q102LJ 100 30 45 4.47 0.15 EETED2Q122K EETED2Q122KJ 100 35 40 4.47 0.15 EETED2Q122L EETED2Q122LJ 100 35 45 5.08 0.15 EETED2Q152L EETED2Q152LJ 100 1800 35 50 5.48 0.15 EETED2Q182L EETED2Q182LJ 100 220 22 30 1.83 0.15 EETED2E221H EETED2E221HJ 200 270 22 30 2.03 0.15 EETED2E271H EETED2E271HJ 200 25 25 2.03 0.15 EETED2E271J EETED2E271JJ 200 22 35 2.23 0.15 EETED2E331H EETED2E331HJ 200 25 30 2.23 0.15 EETED2E331J EETED2E331JJ 200 22 40 2.44 0.15 EETED2E391H EETED2E391HJ 200 25 30 2.44 0.15 EETED2E391J EETED2E391JJ 200 330 390 250 Specification Case size Ripple Dia. Length current tan δ 470 560 680 820 1000 1200 30 25 2.44 0.15 EETED2E391K EETED2E391KJ 200 22 45 2.64 0.15 EETED2E471H EETED2E471HJ 200 25 35 2.64 0.15 EETED2E471J EETED2E471JJ 200 30 30 2.64 0.15 EETED2E471K EETED2E471KJ 200 25 40 3.05 0.15 EETED2E561J EETED2E561JJ 200 30 30 3.05 0.15 EETED2E561K EETED2E561KJ 200 35 25 3.05 0.15 EETED2E561L EETED2E561LJ 200 25 45 3.45 0.15 EETED2E681J EETED2E681JJ 200 30 35 3.45 0.15 EETED2E681K EETED2E681KJ 100 35 30 3.45 0.15 EETED2E681L EETED2E681LJ 200 30 40 3.76 0.15 EETED2E821K EETED2E821KJ 100 35 35 3.76 0.15 EETED2E821L EETED2E821LJ 100 30 50 4.06 0.15 EETED2E102K EETED2E102KJ 100 35 40 4.06 0.15 EETED2E102L EETED2E102LJ 100 35 45 4.47 0.15 EETED2E122L EETED2E122LJ 100 1500 35 50 5.08 0.15 EETED2E152L EETED2E152LJ 100 82 22 25 1.14 0.15 EETED2G820H EETED2G820HJ 200 100 22 30 1.30 0.15 EETED2G101H EETED2G101HJ 200 25 25 1.30 0.15 EETED2G101J EETED2G101JJ 200 22 35 1.46 0.15 EETED2G121H EETED2G121HJ 200 25 30 1.46 0.15 EETED2G121J EETED2G121JJ 200 22 40 1.53 0.15 EETED2G151H EETED2G151HJ 200 25 30 1.53 0.15 EETED2G151J EETED2G151JJ 200 120 400 150 180 30 25 1.53 0.15 EETED2G151K EETED2G151KJ 200 22 45 1.60 0.15 EETED2G181H EETED2G181HJ 200 25 35 1.60 0.15 EETED2G181J EETED2G181JJ 200 30 30 1.60 0.15 EETED2G181K EETED2G181KJ 200 Endurance : 105°C 2000h Terminal Pitch : 10mm When capacitors of φ35×45L and φ35×50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety consern arise regarding this product,please be sure to contact us immediately. Ñ EE174 Ñ Aluminum Electrolytic Capacitors/ ED ■ Standard Products W.V. Cap. (±20%) (V) (µF) 220 400 (mm) (50kHz) (120Hz) (+105°C) (+20°C) (mm) (A) Part No. PVC sleeve Terminal Length 4.0mm (WithoutP.V.C.plate) Part No. Min.PackagingQ'ty PET sleeve Terminal Length 4.0mm (Without P.V.C.plate) (pcs) 22 50 2.03 0.15 EETED2G221H EETED2G221HJ 200 25 40 2.03 0.15 EETED2G221J EETED2G221JJ 200 30 30 2.03 0.15 EETED2G221K EETED2G221KJ 200 35 25 2.03 0.15 EETED2G221L EETED2G221LJ 200 25 45 2.23 0.15 EETED2G271J EETED2G271JJ 200 30 35 2.23 0.15 EETED2G271K EETED2G271KJ 100 35 30 2.23 0.15 EETED2G271L EETED2G271LJ 200 30 40 2.44 0.15 EETED2G331K EETED2G331KJ 100 35 30 2.44 0.15 EETED2G331L EETED2G331LJ 200 30 45 2.64 0.15 EETED2G391K EETED2G391KJ 100 35 35 2.64 0.15 EETED2G391L EETED2G391LJ 100 470 35 40 2.84 0.15 EETED2G471L EETED2G471LJ 100 560 35 45 3.05 0.15 EETED2G561L EETED2G561LJ 100 68 22 25 1.08 0.15 EETED2S680H EETED2S820HJ 200 82 22 30 1.14 0.15 EETED2S820H EETED2S820HJ 200 25 25 1.14 0.15 EETED2S820J EETED2S820JJ 200 100 22 30 1.30 0.15 EETED2S101H EETED2S101HJ 200 25 25 1.30 0.15 EETED2S101J EETED2S101JJ 200 120 22 35 1.46 0.15 EETED2S121H EETED2S121HJ 200 25 30 1.46 0.15 EETED2S121J EETED2S121JJ 200 22 40 1.53 0.15 EETED2S151H EETED2S151HJ 200 25 35 1.53 0.15 EETED2S151J EETED2S151JJ 200 270 330 390 150 180 420 220 270 450 Specification Case size Ripple Dia. Length current tan δ 30 25 1.53 0.15 EETED2S151K EETED2S151KJ 200 22 45 1.60 0.15 EETED2S181H EETED2S181HJ 200 25 40 1.60 0.15 EETED2S181J EETED2S181JJ 200 30 30 1.60 0.15 EETED2S181K EETED2S181KJ 200 35 25 1.60 0.15 EETED2S181L EETED2S181LJ 200 25 45 2.03 0.15 EETED2S221J EETED2S221JJ 200 30 35 2.03 0.15 EETED2S221K EETED2S221KJ 100 35 30 2.03 0.15 EETED2S221L EETED2S221LJ 200 25 50 2.40 0.15 EETED2S271J EETED2S271JJ 200 30 40 2.40 0.15 EETED2S271K EETED2S271KJ 100 35 30 2.40 0.15 EETED2S271L EETED2S271LJ 200 330 30 45 2.54 0.15 EETED2S331K EETED2S331KJ 100 35 35 2.54 0.15 EETED2S331L EETED2S331LJ 100 390 30 50 2.73 0.15 EETED2S391K EETED2S391KJ 100 35 40 2.73 0.15 EETED2S391L EETED2S391LJ 100 470 35 45 3.18 0.15 EETED2S471L EETED2S471LJ 100 56 22 25 0.95 0.15 EETED2W560H EETED2W560HJ 200 68 22 30 1.08 0.15 EETED2W680H EETED2W680HJ 200 25 25 1.08 0.15 EETED2W680J EETED2W680JJ 200 Endurance : 105°C 2000h Terminal Pitch : 10mm When capacitors of φ35×45L and φ35×50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety consern arise regarding this product,please be sure to contact us immediately. Ñ EE175 Ñ Aluminum Electrolytic Capacitors/ ED ■ Standard Products W.V. Cap. (±20%) (V) (µF) 82 100 120 150 450 180 220 Specification Case size Ripple Dia. Length current tan δ (mm) (50kHz) (120Hz) (+105°C) (+20°C) (mm) (A) Part No. PVC sleeve Terminal Length 4.0mm (WithoutP.V.C.plate) Part No. Min.PackagingQ'ty PET sleeve Terminal Length 4.0mm (Without P.V.C.plate) (pcs) 22 30 1.14 0.15 EETED2W820H EETED2W820HJ 200 25 25 1.14 0.15 EETED2W820J EETED2W820JJ 200 22 35 1.30 0.15 EETED2W101H EETED2W101HJ 200 25 30 1.30 0.15 EETED2W101J EETED2W101JJ 200 22 40 1.46 0.15 EETED2W121H EETED2W121HJ 200 25 35 1.46 0.15 EETED2W121J EETED2W121JJ 200 30 25 1.46 0.15 EETED2W121K EETED2W121KJ 200 22 45 1.53 0.15 EETED2W151H EETED2W151HJ 200 25 40 1.53 0.15 EETED2W151J EETED2W151JJ 200 30 30 1.53 0.15 EETED2W151K EETED2W151KJ 200 35 25 1.53 0.15 EETED2W151L EETED2W151LJ 200 22 50 1.60 0.15 EETED2W181H EETED2W181HJ 200 25 40 1.60 0.15 EETED2W181J EETED2W181JJ 200 30 30 1.60 0.15 EETED2W181K EETED2W181KJ 200 35 25 1.60 0.15 EETED2W181L EETED2W181LJ 200 25 45 2.03 0.15 EETED2W221J EETED2W221JJ 200 30 35 2.03 0.15 EETED2W221K EETED2W221KJ 100 35 30 2.03 0.15 EETED2W221L EETED2W221LJ 200 270 30 40 2.45 0.15 EETED2W271K EETED2W271KJ 100 35 35 2.45 0.15 EETED2W271L EETED2W271LJ 100 330 30 50 2.64 0.15 EETED2W331K EETED2W331KJ 100 35 40 2.64 0.15 EETED2W331L EETED2W331LJ 100 390 35 40 2.82 0.15 EETED2W391L EETED2W391LJ 100 470 35 50 3.53 0.15 EETED2W471L EETED2W471LJ 100 Endurance : 105°C 2000h Terminal Pitch : 10mm When capacitors of φ35×45L and φ35×50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety consern arise regarding this product,please be sure to contact us immediately. Ñ EE176 Ñ