EEU-TA1C471S

Aluminum Electrolytic Capacitors/ TA Radial Lead Type Series: TA Type: A ■ Features ● ● ● ● Endurance: 125 °C 2000 h Heat cycle: 1000 cycle –40 °C to +125 °C AEC-Q200 qualified ✽ RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current –40 °C to + 125 °C 10 V .DC to 63 V .DC 2.2 μF to 4700 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) W.V.(V) 10 16 25 35 50 63 (120Hz / +20 °C) tan d 0.20 0.16 0.14 0.12 0.10 0.09 For capacitance value > 1000 μF , add 0.02 per every 1000 μF. tan d After following life test with DC voltage and +125 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), for 2000 hours, when the capacitors are restored to 20 °C, the capacitors, shall meet the limits specified below. Endurance Capacitance change ±30% of initial measured value tan d < 300 % of initial specified value DC leakage current < initial specified value Shelf Life After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) ■ Frequency correction factor for ripple current W.V. (V.DC) Frequency (Hz) Cap. (μF) 60 120 1k 10 k 100 k 1 to 330 0.55 0.65 0.85 0.90 1.00 470 to 1000 0.70 0.75 0.90 0.95 1.00 2200 to 4700 0.75 0.80 0.90 0.95 1.00 10 to 63 ■ Dimensions in mm (not to scale) Sleeve fd±0.05 (Unit : mm) 08 010 + Pressure relief L= 14 min. 3 min. 0D±0.5 F±0.5 – 0D±0.5 =L16 : L±1.0 (016L15, 018L15 : L±1.5) L20 : L±2.0 Body Dia. 0D 8 10 12.5 16 18 Lead Dia. 0d 0.6 Lead space F 3.5 0.6 0.6 0.8 0.8 5.0 5.0 7.5 7.5 ✽ This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2015 – EEE-94 – Aluminum Electrolytic Capacitors/ TA ■ Standard Products Endurance : 125 °C 2000 h Case size W.V. (V) Cap. (±20 %) (μF) (mm) 330 470 8 10 10 12.5 12.5 16 18 16 18 16 18 8 10 10 12.5 16 16 18 16 18 18 8 10 10 10 12.5 12.5 16 18 16 18 18 10 10 10 12.5 16 16 18 18 1000 10 2200 3300 4700 220 330 470 1000 16 2200 3300 4700 100 220 330 470 25 1000 2200 3300 100 220 330 35 Dia. 470 1000 2200 Specification Ripple ImpedCurrent ance Length (100 kHz) (100 kHz) (+125 °C) (+20 °C) (mm) (mA r.m.s.) (Ω) 11.5 12.5 20 15 25 20 15 25 20 31.5 25 11.5 12.5 16 20 15 25 20 31.5 25 31.5 11.5 12.5 16 20 15 25 20 15 31.5 25 35.5 12.5 16 20 20 15 25 20 35.5 500 680 1100 1085 1750 1985 1800 2300 2250 2710 2470 500 680 945 1490 1520 2300 2250 2710 2470 3270 500 680 945 1100 1085 1750 1985 1800 2710 2470 3310 555 765 930 1330 1450 2010 2180 2790 0.130 0.100 0.057 0.070 0.033 0.032 0.042 0.024 0.031 0.020 0.022 0.130 0.100 0.075 0.042 0.047 0.024 0.031 0.020 0.022 0.018 0.130 0.100 0.075 0.057 0.070 0.033 0.032 0.042 0.020 0.022 0.017 0.180 0.130 0.100 0.070 0.088 0.037 0.046 0.025 Lead Length Lead Dia. Min. Packaging Q'ty Lead Space Straight Taping ✽B (mm) (mm) (mm) 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 3.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 3.5 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 Part No. Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 100 100 100 100 100 100 200 200 200 200 100 100 100 100 100 50 200 200 200 200 200 200 100 100 100 100 50 200 200 200 200 100 100 100 50 1000 500 500 500 500 250 250 250 250 EEUTA1A331( ) EEUTA1A471( ) EEUTA1A102( ) EEUTA1A102S( ) EEUTA1A222L( ) EEUTA1A222( ) EEUTA1A222S( ) EEUTA1A332( ) EEUTA1A332S( ) EEUTA1A472 EEUTA1A472S( ) EEUTA1C221( ) EEUTA1C331( ) EEUTA1C471( ) EEUTA1C102( ) EEUTA1C102S( ) EEUTA1C222( ) EEUTA1C222S( ) EEUTA1C332 EEUTA1C332S( ) EEUTA1C472 EEUTA1E101( ) EEUTA1E221( ) EEUTA1E331( ) EEUTA1E471( ) EEUTA1E471S( ) EEUTA1E102L( ) EEUTA1E102( ) EEUTA1E102S( ) EEUTA1E222 EEUTA1E222S( ) EEUTA1E332 EEUTA1V101( ) EEUTA1V221( ) EEUTA1V331( ) EEUTA1V471( ) EEUTA1V471S( ) EEUTA1V102( ) EEUTA1V102S( ) EEUTA1V222 250 1000 500 500 500 250 250 250 250 1000 500 500 500 500 500 250 250 250 500 500 500 500 250 250 250 · When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2015 – EEE-95 – Aluminum Electrolytic Capacitors/ TA ■ Standard Products Endurance : 125 °C 2000 h Case size W.V. (V) 50 Cap. (±20 %) (μF) (mm) 10 22 33 47 100 220 8 8 8 8 10 10 12.5 16 12.5 16 18 16 18 8 10 10 10 12.5 16 18 16 18 16 18 330 470 1000 22 33 47 100 63 Dia. 220 330 470 Specification Ripple ImpedCurrent ance Length (100 kHz) (100 kHz) (+125 °C) (+20 °C) (mm) (mA r.m.s.) (Ω) 11.5 11.5 11.5 11.5 12.5 20 20 15 25 20 15 31.5 25 11.5 12.5 16 20 25 20 15 25 20 31.5 25 180 250 300 440 555 930 1330 1450 1650 1650 1710 2430 2350 310 410 460 680 1325 1360 1300 1660 1760 2055 1990 0.950 0.650 0.450 0.350 0.180 0.100 0.070 0.088 0.055 0.053 0.075 0.031 0.032 0.470 0.360 0.270 0.205 0.100 0.085 0.120 0.070 0.077 0.060 0.060 Lead Length Lead Dia. Min. Packaging Q'ty Lead Space Straight Taping ✽B (mm) (mm) (mm) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 3.5 3.5 3.5 3.5 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 Part No. Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 100 200 100 100 100 100 200 200 200 200 200 100 100 100 100 100 100 1000 1000 1000 1000 500 500 500 250 500 250 250 EEUTA1H100( ) EEUTA1H220( ) EEUTA1H330( ) EEUTA1H470S( ) EEUTA1H101( ) EEUTA1H221( ) EEUTA1H331( ) EEUTA1H331S( ) EEUTA1H471L( ) EEUTA1H471( ) EEUTA1H471S( ) EEUTA1H102 EEUTA1H102S( ) EEUTA1J220( ) EEUTA1J330( ) EEUTA1J470( ) EEUTA1J101( ) EEUTA1J221L( ) EEUTA1J221( ) EEUTA1J221S( ) EEUTA1J331( ) EEUTA1J331S( ) EEUTA1J471 EEUTA1J471S( ) 250 1000 500 500 500 500 250 250 250 250 250 · When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm. · Please refer to the page of “Taping Dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Mar. 2015 – EEE-96 –