Aluminum Electrolytic Capacitors/ FK
Radial Lead Type
Series:
FK
Type:
A
■ Features
● Low impedance (10 % to 30 % less than FC Series)
Miniaturization (30 % to 40 % less than FC Series)
● Endurance : 3000 h to 5000 h at +105 °C
● AEC-Q200 qualified ✽
● RoHS directive compliant
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan d
–55 °C to +105 °C
6.3 V.DC to 35 V.DC
180 μF to 12000 μF
±20 % (120 Hz/+20 °C)
I < 0.01 CV (μA) After 2 minutes
W.V.
6.3
10
16
25
35
tan d
0.22
0.19
0.16
0.14
0.12
Add 0.02 per 1000 μF for products of 1000 μF or more.
(120 Hz/+20 °C)
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specified bellow.
Duration : 08: 3000 hours , 010: 4000 hours , 012.5 to 018: 5000 hours
Endurance
Capacitance change ±20 % of initial measured value
tan d
< 200 % of initial specified value
DC leakage current
< initial specified value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Shelf Life
■ Frequency correction factor for ripple current
W.V.(V.DC)
180
6.3 to 35
Frequency (Hz)
Cap (μF)
390
1200
60
120
1k
10 k
100 k
to
330
0.60
0.70
0.85
0.95
1.00
to
1000
0.65
0.75
0.90
0.98
1.00
to 12000
0.75
0.80
0.95
1.00
1.00
■ Dimensions in mm (not to scale)
Pressure relief
fd±0.05
Sleeve
(Unit : mm)
08
010
+
L=
14 min.
0D±0.5
3 min.
F±0.5
–
0D±0.5
=L16 : L±1.5
L20 : L±2.0
Body Dia. fD
8
10
16
18
Body Length L
—
—
12.5 to 25
12.5
30 to 40
—
—
Lead Dia. fd
0.6
0.6
0.6
0.8
0.8
0.8
Lead space F
3.5
5.0
5.0
5.0
7.5
7.5
✽ This product qualify for AEC-Q200, but it has some deviations.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-73 –
Aluminum Electrolytic Capacitors/ FK
■ Case size/Impedance/Ripple current
Impedance
(Ω)/(100 kHz)
Case size
(0D×L)
8
8
8
10
10
10
10
10
12.5
12.5
12.5
12.5
12.5
12.5
16
16
16
18
18
18
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
11.5
15
20
12.5
16
20
25
30
15
20
25
30
35
40
15
20
25
15
20
25
Ripple Current
(mA r.m.s.)/(100 kHz)
+20 °C
–10 °C
+105 °C
0.090
0.062
0.044
0.063
0.049
0.035
0.033
0.025
0.048
0.029
0.022
0.018
0.016
0.014
0.038
0.026
0.019
0.036
0.025
0.018
0.180
0.124
0.088
0.126
0.098
0.070
0.066
0.050
0.096
0.058
0.044
0.036
0.032
0.028
0.076
0.052
0.038
0.072
0.050
0.036
630
860
1220
900
1240
1490
1680
2140
1400
1890
2280
2720
2940
3010
1800
2330
2760
2060
2640
2850
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-74 –
Aluminum Electrolytic Capacitors/ FK
■ Standard Products
Endurance : 105 °C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h
Case size
W.V.
Cap.
(±20 %)
Dia.
(V)
(μF)
(mm)
680
1000
1500
1800
2200
6.3
3300
4700
5600
6800
8200
12000
560
820
1200
1500
1800
10
2700
3900
4700
5600
6800
8200
8
8
10
8
10
12.5
10
10
10
12.5
16
12.5
18
12.5
16
12.5
12.5
16
18
18
8
8
10
8
10
12.5
10
10
10
12.5
16
12.5
18
12.5
16
12.5
12.5
16
18
18
Specification
Ripple Imped- EndurCurrent ance
ance
Length
(100 kHz) (100 kHz)
(+105 °C) (+20 °C)
(hours)
(mm) (mA r.m.s.) (Ω)
11.5
15
12.5
20
16
15
20
25
30
20
15
25
15
30
20
35
40
25
20
25
11.5
15
12.5
20
16
15
20
25
30
20
15
25
15
30
20
35
40
25
20
25
630
860
900
1220
1240
1400
1490
1680
2140
1890
1800
2280
2060
2720
2330
2940
3010
2760
2640
2850
630
860
900
1220
1240
1400
1490
1680
2140
1890
1800
2280
2060
2720
2330
2940
3010
2760
2640
2850
0.090
0.062
0.063
0.044
0.049
0.048
0.035
0.033
0.025
0.029
0.038
0.022
0.036
0.018
0.026
0.016
0.014
0.019
0.025
0.018
0.090
0.062
0.063
0.044
0.049
0.048
0.035
0.033
0.025
0.029
0.038
0.022
0.036
0.018
0.026
0.016
0.014
0.019
0.025
0.018
3000
3000
4000
3000
4000
5000
4000
4000
4000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
3000
3000
4000
3000
4000
5000
4000
4000
4000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
Lead Length
Lead
Lead Space
Dia.
Taping
Straight
✽B
(mm)
(mm)
(mm)
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
5.0
7.5
7.5
7.5
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
5.0
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
Min. Packaging Q'ty
Part No.
EEUFK0J681( )
EEUFK0J102L( )
EEUFK0J102( )
EEUFK0J152L( )
EEUFK0J152( )
EEUFK0J182S( )
EEUFK0J222( )
EEUFK0J222L( )
EEUFK0J332L
EEUFK0J332( )
EEUFK0J332S( )
EEUFK0J472( )
EEUFK0J472S( )
EEUFK0J562L
EEUFK0J562S( )
EEUFK0J682L
EEUFK0J822L
EEUFK0J822( )
EEUFK0J822S( )
EEUFK0J123S( )
EEUFK1A561( )
EEUFK1A821L( )
EEUFK1A821( )
EEUFK1A122L( )
EEUFK1A122( )
EEUFK1A152S( )
EEUFK1A182( )
EEUFK1A182L( )
EEUFK1A272L
EEUFK1A272( )
EEUFK1A272S( )
EEUFK1A392( )
EEUFK1A392S( )
EEUFK1A472L
EEUFK1A472S( )
EEUFK1A562L
EEUFK1A682L
EEUFK1A682( )
EEUFK1A682S( )
EEUFK1A822S( )
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
100
100
100
100
1000
1000
500
1000
500
500
500
500
500
250
500
250
250
250
250
250
1000
1000
500
1000
500
500
500
500
500
250
500
250
250
250
250
250
· When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-75 –
Aluminum Electrolytic Capacitors/ FK
■ Standard Products
Endurance : 105 °C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h
Case size
W.V.
Cap.
(±20 %)
Dia.
(V)
(μF)
(mm)
390
680
820
1000
1200
1500
16
2200
2700
3300
3900
4700
5600
6800
270
390
470
560
820
1000
1200
25
1500
1800
2200
2700
3300
4700
8
8
10
8
10
10
12.5
10
10
12.5
16
12.5
18
12.5
12.5
16
12.5
18
16
18
8
8
10
8
10
10
12.5
10
12.5
10
16
12.5
18
12.5
16
12.5
12.5
16
18
18
Specification
Ripple Imped- EndurCurrent ance
ance
Length
(100 kHz) (100 kHz)
(+105 °C) (+20 °C)
(mm) (mA r.m.s.) (Ω)
(hours)
11.5
15
12.5
20
16
20
15
25
30
20
15
25
15
30
35
20
40
20
25
25
11.5
15
12.5
20
16
20
15
25
20
30
15
25
15
30
20
35
40
25
20
25
630
860
900
1220
1240
1490
1400
1680
2140
1890
1800
2280
2060
2720
2940
2330
3010
2640
2760
2850
630
860
900
1220
1240
1490
1400
1680
1890
2140
1800
2280
2060
2720
2330
2940
3010
2760
2640
2850
0.090
0.062
0.063
0.044
0.049
0.035
0.048
0.033
0.025
0.029
0.038
0.022
0.036
0.018
0.016
0.026
0.014
0.025
0.019
0.018
0.090
0.062
0.063
0.044
0.049
0.035
0.048
0.033
0.029
0.025
0.038
0.022
0.036
0.018
0.026
0.016
0.014
0.019
0.025
0.018
3000
3000
4000
3000
4000
4000
5000
4000
4000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
3000
3000
4000
3000
4000
4000
5000
4000
5000
4000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
Lead Length
Lead
Lead Space
Dia.
Taping
Straight
✽B
(mm)
(mm)
(mm)
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
5.0
7.5
5.0
7.5
7.5
7.5
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
7.5
5.0
5.0
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
Min. Packaging Q'ty
Part No.
EEUFK1C391( )
EEUFK1C681L( )
EEUFK1C681( )
EEUFK1C821L( )
EEUFK1C102( )
EEUFK1C122( )
EEUFK1C122S( )
EEUFK1C152L( )
EEUFK1C222L
EEUFK1C222( )
EEUFK1C222S( )
EEUFK1C272( )
EEUFK1C272S( )
EEUFK1C332L
EEUFK1C392L
EEUFK1C392S( )
EEUFK1C472L
EEUFK1C472S( )
EEUFK1C562( )
EEUFK1C682S( )
EEUFK1E271( )
EEUFK1E391L( )
EEUFK1E471( )
EEUFK1E561L( )
EEUFK1E561( )
EEUFK1E821( )
EEUFK1E821S( )
EEUFK1E102L( )
EEUFK1E122( )
EEUFK1E152L
EEUFK1E152S( )
EEUFK1E182( )
EEUFK1E182S( )
EEUFK1E222L
EEUFK1E222S( )
EEUFK1E272L
EEUFK1E332L
EEUFK1E332( )
EEUFK1E332S( )
EEUFK1E472S( )
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
100
200
100
200
100
100
100
100
100
100
100
100
200
200
200
200
200
200
200
200
200
100
100
200
100
100
100
100
100
100
100
100
1000
1000
500
1000
500
500
500
500
500
250
500
250
250
250
250
250
1000
1000
500
1000
500
500
500
500
500
250
500
250
250
250
250
250
· When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-76 –
Aluminum Electrolytic Capacitors/ FK
■ Standard Products
Endurance : 105 °C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h
Case size
W.V.
Cap.
(±20 %)
Dia.
(V)
(μF)
(mm)
180
270
390
560
680
820
35
1000
1200
1500
1800
2200
3300
8
8
10
8
10
10
12.5
10
12.5
10
16
12.5
18
12.5
12.5
16
12.5
16
18
18
Specification
Ripple Imped- EndurCurrent ance
ance
Length
(100 kHz) (100 kHz)
(+105 °C) (+20 °C)
(hours)
(mm) (mA r.m.s.) (Ω)
11.5
15
12.5
20
16
20
15
25
20
30
15
25
15
30
35
20
40
25
20
25
630
860
900
1220
1240
1490
1400
1680
1890
2140
1800
2280
2060
2720
2940
2330
3010
2760
2640
2850
0.090
0.062
0.063
0.044
0.049
0.035
0.048
0.033
0.029
0.025
0.038
0.022
0.036
0.018
0.016
0.026
0.014
0.019
0.025
0.018
3000
3000
4000
3000
4000
4000
5000
4000
5000
4000
5000
5000
5000
5000
5000
5000
5000
5000
5000
5000
Lead Length
Lead
Lead Space
Dia.
Taping
Straight
✽B
(mm)
(mm)
(mm)
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
3.5
3.5
5.0
3.5
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
5.0
5.0
7.5
5.0
7.5
7.5
7.5
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
7.5
5.0
7.5
7.5
7.5
7.5
7.5
Min. Packaging Q'ty
Part No.
EEUFK1V181( )
EEUFK1V271L( )
EEUFK1V271( )
EEUFK1V391L( )
EEUFK1V391( )
EEUFK1V561( )
EEUFK1V561S( )
EEUFK1V681L( )
EEUFK1V821( )
EEUFK1V102L
EEUFK1V102S( )
EEUFK1V122( )
EEUFK1V122S( )
EEUFK1V152L
EEUFK1V182L
EEUFK1V182S( )
EEUFK1V222L
EEUFK1V222( )
EEUFK1V222S( )
EEUFK1V332S( )
Straight
Taping
Leads
(pcs)
(pcs)
200
200
200
200
200
200
200
200
200
100
100
200
100
100
100
100
100
100
100
100
1000
1000
500
1000
500
500
500
500
500
250
500
250
250
250
250
250
· When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 May. 2014
– EEE-77 –
很抱歉,暂时无法提供与“EEUFK1A122L”相匹配的价格&库存,您可以联系我们找货
免费人工找货