EEUHD1E102

Aluminum Electrolytic Capacitors (Radial Lead Type) Radial Lead Type Series : HD Type : A Features ● Endurance : 105 °C 1000 h to 2000 h Higher Capacitance : 1 Size Miniturized Product of Current A-NHG ● RoHS compliant ● Minaturize, Specifications Category temperature range Rated voltage range Capacitance range Capacitance tolerance –55 °C to +105 °C 10 V.DC to 50 V.DC 2.2 µF to 22000 µF ±20 % (120 Hz/+20 °C) Leakage current I < 0.01 CV or 3 (µA) After 2 minutes (Which is greater) Dissipation factor (tan d) Please see the attached characteristics list After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors are restored to 20 °C, the capacitors shall meet the limits specified below. Endurance Duration : 05 to 08=1000 hours, 010 to 018=2000 hours Capacitance change Within ±20 % of the initial value tan d < 200 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf life Frequency correction factor for ripple current Rated voltage (V.DC) 2.2 10 to 50 Frequency (Hz) Capacitance (µF) 60 120 1k 10 k 100 k to 33 0.75 1.00 1.55 1.80 2.00 47 to 470 0.80 1.00 1.35 1.50 1.50 1000 to 22000 0.85 1.00 1.10 1.15 1.15 fd±0.05 Dimensions Sleeve Pressure relief 06.3 < < 08 010 < + L✽ 14 min. 0D±0.5 3 min. F±0.5 – 0D±0.5 ✽ L < 16 : L±1.5 L > 20 : L±2.0 (Unit : mm) 0D 0d F 5 0.5 2.0 6.3 0.5 2.5 8 0.6 3.5 10 0.6 5.0 12.5 0.6 5.0 16 0.8 7.5 18 0.8 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 05 to 08=1000 h, 010 to 018=2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 0D L 330 470 1000 2200 4700 6800 10000 15000 22000 100 220 330 470 3300 4700 6800 8200 10000 15000 47 68 100 220 330 470 1000 2200 3300 4700 5600 6800 10000 47 100 220 330 470 680 2200 3300 4700 6800 6.3 8 10 10 12.5 12.5 16 16 18 5 6.3 8 8 12.5 12.5 16 16 16 18 5 5 6.3 8 8 10 10 12.5 12.5 16 16 16 18 5 6.3 8 10 10 10 12.5 16 16 18 11.2 11.5 12.5 16 20 25 25 31.5 35.5 11 11.2 11.5 11.5 20 25 25 25 31.5 35.5 11 11 11.2 11.5 11.5 12.5 16 20 25 25 25 31.5 35.5 11 11.2 11.5 12.5 16 16 25 25 31.5 35.5 10 16 25 35 Specification Lead length (mm) Ripple Lead space Lead current tan d Endurance dia. (120 Hz) (120 Hz) Taping Taping (hours) (+105 °C) (+20 °C) 0d Straight ✽B ✽H (mA r.m.s.) 200 0.24 1000 0.5 2.5 5.0 2.5 250 0.24 1000 0.6 3.5 5.0 460 0.24 2000 0.6 5.0 5.0 760 0.26 2000 0.6 5.0 5.0 1260 0.30 2000 0.6 5.0 5.0 1570 0.34 2000 0.6 5.0 5.0 1890 0.42 2000 0.8 7.5 7.5 2180 0.52 2000 0.8 7.5 2400 0.66 2000 0.8 7.5 110 0.20 1000 0.5 2.0 5.0 2.5 180 0.20 1000 0.5 2.5 5.0 2.5 260 0.20 1000 0.6 3.5 5.0 310 0.20 1000 0.6 3.5 5.0 1170 0.24 2000 0.6 5.0 5.0 1480 0.26 2000 0.6 5.0 5.0 1780 0.30 2000 0.8 7.5 7.5 1780 0.34 2000 0.8 7.5 7.5 2060 0.38 2000 0.8 7.5 2210 0.48 2000 0.8 7.5 91 0.16 1000 0.5 2.0 5.0 2.5 91 0.16 1000 0.5 2.0 5.0 2.5 130 0.16 1000 0.5 2.5 5.0 2.5 230 0.16 1000 0.6 3.5 5.0 310 0.16 1000 0.6 3.5 5.0 380 0.16 2000 0.6 5.0 5.0 680 0.16 2000 0.6 5.0 5.0 1090 0.18 2000 0.6 5.0 5.0 1400 0.20 2000 0.6 5.0 5.0 1750 0.22 2000 0.8 7.5 7.5 1750 0.24 2000 0.8 7.5 7.5 2040 0.26 2000 0.8 7.5 2200 0.34 2000 0.8 7.5 90 0.14 1000 0.5 2.0 5.0 2.5 150 0.14 1000 0.5 2.5 5.0 2.5 270 0.14 1000 0.6 3.5 5.0 350 0.14 2000 0.6 5.0 5.0 460 0.14 2000 0.6 5.0 5.0 460 0.14 2000 0.6 5.0 5.0 1260 0.16 2000 0.6 5.0 5.0 1610 0.18 2000 0.8 7.5 7.5 1910 0.20 2000 0.8 7.5 2050 0.24 2000 0.8 7.5 Min. Packaging Q'ty Part No. EEUHD1A331( ) EEUHD1A471( ) EEUHD1A102( ) EEUHD1A222( ) EEUHD1A472( ) EEUHD1A682( ) EEUHD1A103( ) EEUHD1A153 EEUHD1A223 EEUHD1C101( ) EEUHD1C221( ) EEUHD1C331( ) EEUHD1C471( ) EEUHD1C332( ) EEUHD1C472( ) EEUHD1C682( ) EEUHD1C822( ) EEUHD1C103 EEUHD1C153 EEUHD1E470( ) EEUHD1E680( ) EEUHD1E101( ) EEUHD1E221( ) EEUHD1E331( ) EEUHD1E471( ) EEUHD1E102( ) EEUHD1E222( ) EEUHD1E332( ) EEUHD1E472( ) EEUHD1E562( ) EEUHD1E682 EEUHD1E103 EEUHD1V470( ) EEUHD1V101( ) EEUHD1V221( ) EEUHD1V331( ) EEUHD1V471( ) EEUHD1V681( ) EEUHD1V222( ) EEUHD1V332( ) EEUHD1V472 EEUHD1V682 Straight Taping leads (pcs) (pcs) 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 100 100 100 50 200 200 200 200 200 200 200 200 200 100 100 100 50 200 200 200 200 200 200 200 100 100 50 2000 1000 500 500 500 500 250 2000 2000 1000 1000 500 500 250 250 2000 2000 2000 1000 1000 500 500 500 500 250 250 2000 2000 1000 500 500 500 500 250 · When requesting taped product, please put the letter “B” or “H” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2016 Aluminum Electrolytic Capacitors (Radial Lead Type) Characteristics list Endurance : 105 °C 05 to 08=1000 h, 010 to 018=2000 h Case size (mm) Rated Cap. voltage (±20 %) (V.DC) (µF) 50 0D L Specification Lead length (mm) Ripple Lead space current tan d Lead Part No. Endurance (120 Hz) (120 Hz) dia. Taping Taping (hours) Straight (+105 °C) (+20 °C) 0d ✽B ✽H (mA r.m.s.) 18 0.12 1000 0.5 2.0 5.0 2.5 EEUHD1H2R2( ) Min. Packaging Q'ty Straight Taping leads (pcs) (pcs) 2.2 5 11 200 2000 3.3 5 11 22 0.12 1000 0.5 2.0 5.0 2.5 EEUHD1H3R3( ) 200 2000 4.7 5 11 26 0.12 1000 0.5 2.0 5.0 2.5 EEUHD1H4R7( ) 200 2000 10 5 11 39 0.12 1000 0.5 2.0 5.0 2.5 EEUHD1H100( ) 200 2000 22 5 11 65 0.12 1000 0.5 2.0 5.0 2.5 EEUHD1H220( ) 200 2000 33 5 11 90 0.12 1000 0.5 2.0 5.0 2.5 EEUHD1H330( ) 200 2000 47 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 2.5 EEUHD1H470( ) 200 2000 68 2.5 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 EEUHD1H680( ) 200 2000 100 8 11.5 180 0.12 1000 0.6 3.5 5.0 EEUHD1H101( ) 200 1000 220 10 12.5 300 0.12 2000 0.6 5.0 5.0 EEUHD1H221( ) 200 500 330 10 16 410 0.12 2000 0.6 5.0 5.0 EEUHD1H331( ) 200 500 470 10 20 530 0.12 2000 0.6 5.0 5.0 EEUHD1H471( ) 200 500 560 16 15 650 0.12 2000 0.8 7.5 7.5 EEUHD1H561S( ) 100 250 680 16 15 650 0.12 2000 0.8 7.5 7.5 EEUHD1H681S( ) 100 250 5.0 500 1000 12.5 25 950 0.12 2000 0.6 5.0 EEUHD1H102( ) 200 2200 16 31.5 1470 0.14 2000 0.8 7.5 EEUHD1H222 100 3300 18 35.5 1770 0.16 2000 0.8 7.5 EEUHD1H332 50 · When requesting taped product, please put the letter “B” or “H” between the “( )”. Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm. · Please refer to the page of “Taping dimensions”. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2016