EEV-FC0J102P

Aluminum Electrolytic Capacitors/ FC Low impedance Surface Mount Type Series: FC Type: V FC ↑ HA ■ Features ● ● ● ● ● Endurance : 105 °C 1000 h Low impedance (1/2 for HA series) Vibration-proof product is available upon request. (08 mm and larger) AEC-Q200 qualified ✽ RoHS directive compliant ■ Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan d Characteristics at Low Temperature W.V. (V) Z(–25 °C) / Z(+20 °C) Z(–40 °C) / Z(+20 °C) –40 °C to +105 °C 6.3 V.DC to 50 V.DC 1 μF to 1500 μF ±20 % (120 Hz/+20 °C) I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater) Please see the attached standard products list 6.3 10 16 25 35 50 2 2 2 2 2 2 (Impedance ratio at 120 Hz) 3 3 3 3 3 3 After applying rated working voltage for 1000 hours at +105 °C±2 °C and then being stabilized at +20 °C, Capacitors shall meet the following limits. Endurance Capacitance change tan d DC leakage current ±20 % of initial measured value < 200 % of initial specified value < initial specified value Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment) Resistance to Soldering Heat After reflow soldering and then being stabilized at +20 °C, capacitor shall meet the following limits. Capacitance change ±10 % of initial measured value tan d < initial specified value DC leakage current < initial specified value ■ Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 120 1k 10 k 100 k to 0.70 0.75 0.90 0.95 1.00 ■ Marking ■ Dimensions in mm (not to scale) (Unit : mm) Lot number Size code E V H 25 V 35 V 50 V (P) W Pressure Relief (010 and larger) B Rated Voltage Mark j 6.3 V A 10 V C 16 V + L Series identification Mark for Lead-Free Products Black Dot (Square) Rated voltage Mark (I) Capacitance (μF)  K '$ K B±0.2 Negative polarity marking (–) A±0.2 – H 0D±0.5 0.3 max. (I) Example:6.3 V 22 μF Marking color : BLACK ( ) Reference size D L A, B H I W P K 4.0 5.4 + 0.1 - 0.2 4.3 5.5 max. 1.8 0.65±0.1 1.0 0.15 0.35+- 0.20 + 0.1 - 0.2 0.15 0.35+- 0.20 C 5.0 5.4 5.3 6.5 max. 2.2 0.65±0.1 1.5 D 6.3 5.4 +- 0.1 0.2 6.6 7.8 max. 2.6 0.65±0.1 1.8 0.15 0.35+- 0.20 E 8.0 6.2±0.3 8.3 9.5 max. 3.4 0.65±0.1 2.2 0.15 0.35+- 0.20 F 8.0 10.2±0.3 8.3 10.0 max. 3.4 0.90±0.2 3.1 0.70±0.2 G 10.0 10.2±0.3 10.3 12.0 max. 3.5 0.90±0.2 4.6 0.70±0.2 ✽ This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – EEE-35 – Aluminum Electrolytic Capacitors/ FC ■ Standard Products Endurance : 105 °C 1000 h Case size W.V. (V) 6.3 10 16 25 35 50 Cap. (±20 %) (μF) 22 47 68 100 220 330 1000 1500 33 100 150 220 470 1000 10 22 47 68 100 220 330 470 680 6.8 22 33 47 68 100 220 330 470 1 2.2 3.3 4.7 6.8 10 22 33 47 100 220 330 1 2.2 3.3 4.7 10 22 33 47 100 220 Dia. Length (mm) 4 5 6.3 6.3 8 8 10 10 5 8 8 8 10 10 4 5 6.3 8 8 10 10 10 10 4 6.3 6.3 8 8 8 10 10 10 4 4 4 4 5 5 6.3 8 8 10 10 10 4 4 4 5 6.3 8 8 10 10 10 (mm) 5.4 5.4 5.4 5.4 6.2 10.2 10.2 10.2 5.4 6.2 6.2 10.2 10.2 10.2 5.4 5.4 5.4 6.2 6.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 6.2 10.2 10.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 5.4 5.4 6.2 6.2 10.2 10.2 10.2 5.4 5.4 5.4 5.4 5.4 6.2 10.2 10.2 10.2 10.2 Min. Packaging Q'ty Specification Size Code B C D D E F G G C E E F G G B C D E E G G G G B D D E F F G G G B B B B C C D E E G G G B B B C D E F G G G tan d Impedance Ripple Part No. Current (RoHS:compliant) (100 kHz) (120 Hz) (100 kHz) (+105°C) (+20 °C) (+20 °C) (mA r.m.s.) (Ω) 60 0.26 3.00 EEEFC0J220R 95 0.26 1.80 EEEFC0J470R 140 0.26 1.00 EEEFC0J680P 140 0.26 1.00 EEEFC0J101P 230 0.26 0.40 EEEFC0J221P 450 0.26 0.30 EEEFC0J331P 670 0.26 0.15 EEEFC0J102P 670 0.26 0.15 EEEFC0J152P 95 0.19 1.80 EEEFC1A330R 230 0.19 0.40 EEEFC1A101P 230 0.19 0.40 EEEFC1A151P 450 0.19 0.30 EEEFC1A221P 670 0.19 0.15 EEEFC1A471P 670 0.19 0.15 EEEFC1A102P 60 0.16 3.00 EEEFC1C100R 95 0.16 1.80 EEEFC1C220R 140 0.16 1.00 EEEFC1C470P 230 0.16 0.40 EEEFC1C680P 230 0.16 0.40 EEEFC1C101P 670 0.16 0.15 EEEFC1C221P 670 0.16 0.15 EEEFC1C331P 670 0.16 0.15 EEEFC1C471P 670 0.16 0.15 EEEFC1C681P 60 0.14 3.00 EEEFC1E6R8R 140 0.14 1.00 EEEFC1E220P 140 0.14 1.00 EEEFC1E330P 230 0.14 0.40 EEEFC1E470P 450 0.14 0.30 EEEFC1E680P 450 0.14 0.30 EEEFC1E101P 670 0.14 0.15 EEEFC1E221P 670 0.14 0.15 EEEFC1E331P 670 0.14 0.15 EEEFC1E471P 60 0.12 3.00 EEEFC1V1R0R 60 0.12 3.00 EEEFC1V2R2R 60 0.12 3.00 EEEFC1V3R3R 60 0.12 3.00 EEEFC1V4R7R 95 0.12 1.80 EEEFC1V6R8R 95 0.12 1.80 EEEFC1V100R 140 0.12 1.00 EEEFC1V220P 230 0.12 0.40 EEEFC1V330P 230 0.12 0.40 EEEFC1V470P 670 0.12 0.15 EEEFC1V101P 670 0.12 0.15 EEEFC1V221P 670 0.12 0.15 EEEFC1V331P 30 0.12 5.00 EEEFC1H1R0R 30 0.12 5.00 EEEFC1H2R2R 30 0.12 5.00 EEEFC1H3R3R 50 0.12 3.00 EEEFC1H4R7R 70 0.12 2.00 EEEFC1H100P 120 0.12 0.70 EEEFC1H220P 300 0.12 0.60 EEEFC1H330P 500 0.12 0.30 EEEFC1H470P 500 0.12 0.30 EEEFC1H101P 500 0.12 0.30 EEEFC1H221P Reflow (1) (1) (1) (1) (2) (2) (2) (2) (1) (2) (2) (2) (2) (2) (1) (1) (1) (2) (2) (2) (2) (2) (2) (1) (1) (1) (2) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) (1) (1) (1) (1) (1) (2) (2) (2) (2) (2) Taping (pcs) 2000 1000 1000 1000 1000 500 500 500 1000 1000 1000 500 500 500 2000 1000 1000 1000 1000 500 500 500 500 2000 1000 1000 1000 500 500 500 500 500 2000 2000 2000 2000 1000 1000 1000 1000 1000 500 500 500 2000 2000 2000 1000 1000 1000 500 500 500 500 · Please refer to the page of “Reflow Profile” and “The Taping Dimensions”. · When requesting vibration-proof product, please put the last “V” instead to “P” Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Mar. 2014 – EEE-36 –