ELL-VEG100M

Power Inductors Power Inductors / Wire Wound type Series : G Type : ELLVEG Type ELLVEG Type ELLVFG Type ELLVGG Type ELLVGG-C ELLVFG-C ELLVGG ELLVGG-C Features ● Magnetic shielded structure DC resistance and large current capability ● Shock resistant ● RoHS compliant ● Low Recommended Applications ● DSC, Tablet terminal, Portable game device, DC/DC converter circuit for cellular phone Standard Packing Quantity ● 2,000 pcs./reel ■ As for Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 E L L V G G 1 0 0 M Product Code Outer size Height Structure ELL Choke Coil (Magnetic shielded type ) E 1.0 max. F 1.2 max. G 1.5 max. Dimensions in mm (not to scale) Tolerance Design No. Inductance G Series 11 2R2 → 2.2 µH 150 → 15 µH M → ±20 % N → ±30 % Recommended land patterns in mm (not to scale) 3.00±0.2 3.40 0.60 H 0.10 0.30 Type ELLVEG ELLVFG-C ELLVGG ELLVGG-C 3.20 1.10 0.80 3.00±0.2 0.75 Marking H 1.0 max. 1.2 max. 1.5 max. 1.5 max. 0.70 1.40 0.70 1.40 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Oct. 2014 Power Inductors Standard Parts Series VEG Series VFG-C Series VGG Series VGG-C Part No. ELLVEGR68N ELLVEG1R0N ELLVEG1R5N ELLVEG2R2N ELLVEG3R3N ELLVEG4R7N ELLVEG6R8N ELLVEG100M ELLVEG150M ELLVEG220M ELLVFG1R0NC ELLVFG1R5NC ELLVFG2R2NC ELLVFG3R3NC ELLVFG4R7NC ELLVFG6R8NC ELLVFG100MC ELLVFG150MC ELLVFG220MC ELLVFG330MC ELLVGG1R0N ELLVGG1R2N ELLVGG1R6N ELLVGG2R2N ELLVGG3R3N ELLVGG3R9N ELLVGG4R7N ELLVGG6R8N ELLVGG100M ELLVGG120M ELLVGG150M ELLVGG220M ELLVGG330M ELLVGG470M ELLVGG1R0NC ELLVGG2R2NC ELLVGG3R3NC ELLVGG4R7NC ELLVGG6R8NC ELLVGG100MC ELLVGG120MC ELLVGG150MC ELLVGG220MC ELLVGG330MC ELLVGG470MC ELLVGG101MC Inductance (100 kHz) (µH) Tol. 0.68 1.0 1.5 2.2 ±30 % 3.3 4.7 6.8 10.0 ±20 % 15.0 22.0 1.0 1.5 2.2 ±30 % 3.3 4.7 6.8 10.0 15.0 ±20 % 22.0 33.0 1.0 1.2 1.6 2.2 ±30 % 3.3 3.9 4.7 6.8 10.0 12.0 15.0 ±20 % 22.0 33.0 47.0 1.0 2.2 3.3 ±30 % 4.7 6.8 10.0 12.0 15.0 ±20 % 22.0 33.0 47.0 100 RDC (at 20 °C) (mΩ) Tol. 50 61 74 110 210 240 350 480 710 1200 50 61 87 110 150 230 380 540 710 1160 52 61 73 ±20 % 92 130 150 170 230 280 480 640 800 1330 2100 47 79 110 130 180 260 280 420 530 790 1200 2950 Saturation Rated Current✽1 (mA max.) Temperature Rise Current✽2 (mA max.) 1950 1900 1200 1100 1000 750 580 520 430 330 1500 1300 1100 980 740 600 550 500 350 280 2200 2000 1800 1600 1350 1300 1200 1000 800 690 600 500 450 350 1400 1050 1000 900 700 600 550 450 410 350 260 180 1800 1600 1400 1250 820 770 650 600 490 400 1700 1550 1400 1250 1050 840 640 480 430 330 1800 1600 1550 1400 1100 1000 980 800 730 580 490 460 340 270 2000 1500 1300 1200 1000 860 730 670 600 450 360 250 Marking 7 A C D E H K M O R a c d e h k m o r t A B C D E F H K M N O R T V Z V T R O N M K H E D A Series ✽1 Saturation Rated Current : This DC current which causes a 30 % inductance reduction from its nominal value. ✽2 Temperature Rise Current : This indicates the value of current when temperature rise dt/t= 40 °C (at 20 °C). Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Oct. 2014 Power Inductors A R0 .6 0 Type ELLVEG ELLVFG-C ELLVGG ELLVGG-C t 1.1±0.3 1.3±0.3 1.6±0.3 1.6±0.3 B 4.0 ° max. B–B' Section , A t 0.4±0.1 3.3±0.1 5.50±0.05 12.0±0.3 , B .20 R0 .1 +0 0 .50 f1 4.0 ° max. 2.00±0.05 4.0±0.1 8.0±0.1 1.75±0.10 Embossed Carrier Tape Dimensions in mm (not to scale) 3.3±0.1 R0.20 max. R0 .1 A–A' Section 0 Tape running direction Quantity 2,000 pcs./reel Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Oct. 2014 Power Inductors Safety Precautions (Common precautions for Power Inductors / Wire Wound type) • When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance. The design and specifications in this catalog are subject to change without prior notice. • Do not use the products beyond the specifications described in this catalog. • This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. • Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other significant damage, such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ✽ Systems equipped with a protection circuit and a protection device ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault Precautions for use 1. Operation range and environments 1 These products are designed and manufactured for general and stan dard use in general elec tron ic equipment (e.g. AV equipment, home electric appliances, office equipment, information and communication equipment) 2 These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. • In liquid, such as water, oil, chemicals, or organic solvent • In direct sunlight, outdoors, or in dust • In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 • In an environment where these products cause dew condensation 2. Handling 1 Do not bring magnets or magnetized materials close to the product. The influence of their magnetic field can change the inductance value. 2 Do not apply strong mechanical shocks by either dropping or collision with other parts. Excessive shock can damage the part. 3. Washing of board Kindly consult the Technical department before washing of the PWB with any cleansing agent, and provide the washing condition. 4. Resoldering with a soldering iron The temperature of the tip of the soldering iron should be 360 °C or less, 4 seconds. And resoldering with a soldering iron should be limited to 1 time, and after that should be cooling these. 5. Mounting side External force must be less than 5.0 [N] : while mounting. 6. Storage conditions Normal temperature (–5 to 35 °C), normal humidity (85 % RH max.), shall not be exposed to direct sunlight and harmful gases and care should be taken so as not to cause dew. Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2014