ELLCTP331MB

Power Inductors Power Inductors / Wire Wound type Series : P Type : ELLCTP Features ● Magnetic shielded structure DC resistance and large current capability ● Available on tape and reel for automatic insertion ● RoHS compliant ● Low Recommended Applications ● Audiovisual equipment, Appliance, Office automation equipment, Amusement machine, Power circuit for electric device Standard Packing Quantity ● 500 pcs./reel ■ As for Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 E L L C T P 2 2 0 M Product Code Outer size Height Structure ELL Choke Coil (Magnetic shielded type ) T 4.5 max. Dimensions in mm (not to scale) Inductance P Series 11 Tolerance Design No. 4R7 → 4.7 µH 101 → 100 µH M → ±20 % N → ±30 % Recommended land patterns in mm (not to scale) 3. 0± 0. 5 .2 10 .3 12.0±0.5 Marking 14 Date code 4. 3 6 0. 3. 2± 12.0±0.5 ) .4 (1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Oct. 2014 Power Inductors Standard Parts Part No. ELLCTP1R2NB ELLCTP2R0NB ELLCTP3R3NB ELLCTP4R3NB ELLCTP5R6NB ELLCTP6R8NB ELLCTP9R1NB ELLCTP150MB ELLCTP220MB ELLCTP330MB ELLCTP470MB ELLCTP680MB ELLCTP101MB ELLCTP151MB ELLCTP221MB ELLCTP331MB ELLCTP471MB ELLCTP681MB ELLCTP102MB Inductance (100 kHz) (µH) Tol. 1.2 2.0 3.3 4.3 ±30 % 5.6 6.8 9.1 15.0 22.0 33.0 47.0 68.0 100.0 ±20 % 150.0 220.0 330.0 470.0 680.0 1000.0 RDC (at 20 °C) (mΩ) 4.6 5.6 7.0 8.5 10.0 12.5 15.0 27.0 34.0 52.0 72.0 97.0 150.0 220.0 310.0 500.0 670.0 1070.0 1470.0 Saturation Temperature Rated Current✽1 Rise Current✽2 (mA max.) (mA max.) Tol. 11000 9000 ±30 % 7000 6000 5500 5000 4400 3100 2600 2200 1900 1500 1200 1050 900 750 600 550 400 ±20 % 7000 6500 5800 5000 4500 4000 3800 3100 2600 2100 1800 1500 1200 1000 850 700 550 450 400 Marking 1R2 2R0 3R3 4R3 5R6 6R8 9R1 150 220 330 470 680 101 151 221 331 471 681 102 ✽1 Saturation Rated Current : This DC current which causes a 30% inductance reduction from its nominal value. ✽2 Temperature Rise Current : This indicates the value of current when temperature rise dt/t= 40 °C (at 20 °C). Embossed Carrier Tape Dimensions in mm (not to scale) x. 4.70±0.30 ma 0.40±0.05 2.50±0.10 2.50±0.10 R0 8 ° max. 12.6±0.3 11.5±0.3 24.0±0.5 .5 1.75±0.30 f1 16.0±0.3 .50 +0 0 .10 2.0±0.3 cumulative pitch deviation 4.0±0.3 4.0±0.3 Tape running direction Quantity 500 pcs./reel Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 Oct. 2014 Power Inductors Safety Precautions (Common precautions for Power Inductors / Wire Wound type) • When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance. The design and specifications in this catalog are subject to change without prior notice. • Do not use the products beyond the specifications described in this catalog. • This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. • Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other significant damage, such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ✽ Systems equipped with a protection circuit and a protection device ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault Precautions for use 1. Operation range and environments 1 These products are designed and manufactured for general and stan dard use in general elec tron ic equipment (e.g. AV equipment, home electric appliances, office equipment, information and communication equipment) 2 These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. • In liquid, such as water, oil, chemicals, or organic solvent • In direct sunlight, outdoors, or in dust • In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 • In an environment where these products cause dew condensation 2. Handling 1 Do not bring magnets or magnetized materials close to the product. The influence of their magnetic field can change the inductance value. 2 Do not apply strong mechanical shocks by either dropping or collision with other parts. Excessive shock can damage the part. 3. Washing of board Kindly consult the Technical department before washing of the PWB with any cleansing agent, and provide the washing condition. 4. Resoldering with a soldering iron The temperature of the tip of the soldering iron should be 360 °C or less, 4 seconds. And resoldering with a soldering iron should be limited to 1 time, and after that should be cooling these. 5. Mounting side External force must be less than 5.0 [N] : while mounting. 6. Storage conditions Normal temperature (–5 to 35 °C), normal humidity (85 % RH max.), shall not be exposed to direct sunlight and harmful gases and care should be taken so as not to cause dew. Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2014