ELT3KN149C

Discontinued Voltage Step-up Coils Chip type ELT3KN series High inductance Voltage Step-up coil chip series for piezoelectric buzzers and DC/DC circuitry of EL panels Features ● Small and thin ● High inductance ● RoHS compliant Recommended applications ● Piezoelectric buzzer, Booster circuit for EL backlight (Watch, Electric thermometer, Portable device) Standard packing quantity (Minimum quantity/Packing unit) ●1,000 pcs or 5,000 pcs / reel Explanation of part numbers 1 2 3 4 5 6 7 8 9 10 E L T 3 K N 0 0 4 C Product code Outer size Construction Design No. Packaging Code Packaging Ｂ ø 180 Reel Ｃ ø370 Reel 5.5±0.2 ➄ 0.8±0.1 1.2±0.1 3.1±0.2 0.85±0.10 0.10±0.05 4.5±0.2 3.3±0.1 2.5±0.1 1.2±0.1 ① ② ④ 0.8±0.1 H ⑥ 0.10±0.05 0.25±0.05 0.18±0.05 1.1±0.2 (3.1) 4.5±0.2 ➄ 3.1±0.2 1.2±0.1 (3.3) 5.5±0.2 1.4 max. 0.18±0.05 0.6±0.1 3.3±0.1 ① ④ ④ 1.2±0.1 ② 1.1±0.2 ③ 1.1±0.1 (3.3) D ③ 3.3±0.1 ① 5.5±0.2 3.3±0.2 0.6±0.1 0.125±0.050 1.4±0.2 ③ 0.85±0.10 3.3±0.2 1.2±0.1 ② 0.18±0.05 3.3±0.1 ① (3.1) ➄ 5.5±0.2 B ④ 0.85±0.10 1.2±0.1 ③ 1.65±0.20 (3.1) ➄ ④ E ② 2.0±0.2 1.5±0.1 0.18±0.05 ③ ➄ ① ② ② ④ 0.6±0.1 1.2±0.1 3.3±0.2 ① 3.3±0.1 C 3.3±0.2 0.6±0.1 3.3±0.1 1.2±0.1 A 0.85±0.10 Dimensions in mm (not to scale) ➄ Part Name: ①Core ②Terminal ③Ring ④Coil ⑤Terminal board ⑥Adhesive Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 12-May-23 Voltage Step-up Coils (Chip type) Standard parts Inductance Part No. (mH) ELT3KN004 ELT3KN007 ELT3KN113 ELT3KN126 ELT3KN142 ELT3KN019 ELT3KN109 ELT3KN114 ELT3KN014 ELT3KN018 ELT3KN028 ELT3KN032 ELT3KN101 ELT3KN104 ELT3KN118 ELT3KN121 ELT3KN122 ELT3KN123 ELT3KN124 ELT3KN127 ELT3KN128 ELT3KN129 ELT3KN130 ELT3KN131 ELT3KN020 ELT3KN111 ELT3KN125 ELT3KN041 ELT3KN042 ELT3KN043 ELT3KN139 ELT3KN140 ELT3KN135 ELT3KN136 ELT3KN137 ELT3KN149 ELT3KN151 ELT3KN152 ELT3KN155 ELT3KN162 ELT3KN163 14.00 20.00 1.00 1.50 0.82 14.00 3.80 2.50 30.00 35.00 50.00 25.00 10.00 1.00 2.50 1.00 2.00 1.00 4.00 0.47 0.56 0.68 2.30 2.00 30.00 7.50 4.00 14.00 20.00 12.00 0.68 0.82 1.10 2.00 4.00 0.33 0.56 0.47 1.10 4.00 1.10 DC resistance Tolerance(%) (Ω) 125 170 34 49 24 125 115 83 150 235 250 185 285 35 64 22.5 44 25 85 14 15 17 51 44 150 177 85 125 175 117 19 22 32 55 117 11 17 14 38 117 32 ±40 ±10 ±40 ±10 ±40 ±35 ±40 ±10 ±30 ±10 ±40 ±10 Tolerance(%) DC current (mA) max. 1.7 1.4 25.0 29.0 30.0 1.7 15.0 15.0 1.9 1.9 1.4 10.0 1.4 30.0 20.0 40.0 20.0 30.0 15.0 50.0 45.0 34.0 23.0 20.0 2.5 10.0 15.0 1.7 1.4 1.7 40.0 30.0 30.0 20.0 15.0 60.0 50.0 50.0 25.0 15.0 30.0 ±10 ±15 ±10 ±20 ±15 ±10 ±15 ±10 ±15 ±10 ±15 ±10 ±15 ±10 ±15 Magnetic composition Dimensions Permalloy ring A Brass ring Permalloy ring B Brass ring Permalloy ring C Brass ring Permalloy ring D Brass ring Permalloy ring E Brass ring H Ring less E Brass ring “□” shows the packaging specifications. Applied diagram examples 〈For buzzer〉 VO +1.5 V 〈For EL DC/DC〉 +3.0 V V2 V1 VO Vi Vi Vi Vi V1 V2 Load SC SC Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 12-May-23 Voltage Step-up Coils (Chip type) Temperature (°C) Reflow soldering conditions T3 T2 T1 t1 t2 0 Time ● Pb free solder recommended temperature profile 　Voltage Step-up Coils Part No. ELT3KN Preheat Soldering Peak temperature T1 [℃] t1 [s] T2 [℃] t2 [s] T3 T3 Limit 150 to 170 60 to 120 230 ℃ 30 max. 245 ℃, 10 s 260 ℃, 10 s Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Time of reflow 2 times max. 6-Aug-21 Voltage Step-up Coils (Chip type) Packaging methods (Taping) ● Embossed carrier tape dimensions in mm (not to scale) t1 Chip pocket Sprocket hole B F A W E øD0 Chip component P1 Tape running direction P2 P3 t2 Unit : mm Part No. A B W E F P1 P２ P０ øD0 t1 t2 ELT3KN 3.7 6.4 12.0 1.75 5.5 8.0 2.0 4.0 1.5 0.3 2.6 ● Reel dimensions in mm (not to scale) T E C B Unit : mm D W A Packaging A B C D E W ｔ T Ｂ 180 60 13 21 2 13 1.1 15.2 Ｃ 370 60 13 21 2 14 2.0 18.0 t ● Leader Part, Vacant Position Leader part 200 min. 50 min. Vacant position Tape end 50 min. Vacant position Standard packing quantity Packaging Quantity per reel Ｂ 1,000 pcs Ｃ 5,000 pcs Kind of taping B 1,000 pcs. Embossed carrier Embossed carrier taping Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 6-Aug-21 Safety and Legal Matters to Be Observed Safety and Legal Matters to Be Observed 　Product specifications and applications ■ Please be advised that this product and product specifications are subject to change without notice for improvement purposes. Therefore, please request and confirm the latest delivery specifications that explain the specifications in detail before the final design, or purchase or use of the product, regardless of the application. In addition, do not use this product in any way that deviates from the contents of the company's delivery specifications. 　 ■ Unless otherwise specified in this catalog or the product specifications, this product is intended for use in general electronic equipment (AV products, home appliances, commercial equipment, office equipment, information and communication equipment, etc.). When this product is used for the following special cases, the specification document suited to each application shall be signed/sealed (with Panasonic Industry and the user) in advance..These include applications requiring special quality and reliability, wherein their failures or malfunctions may directly threaten human life or cause harm to the human body (e.g.: space/aircraft equipment, transportation/traffic equipment, combustion equipment, medical equipment, disaster prevention/crime prevention equipment, safety equipment, etc.). 　 　Safety design and product evaluation ■ Please ensure safety through protection circuits, redundant circuits, etc., in the customer's system design so that a defect in our company's product will not endanger human life or cause other serious damage. ■ This catalog shows the quality and performance of individual parts. The durability of parts varies depending on the usage environment and conditions. Therefore, please ensure to evaluate and confirm the state of each part after it has been mounted in your product in the actual operating environment before use. If you have any doubts about the safety of this product, then please notify us immediately, and be sure to conduct a technical review including the above protection circuits and redundant circuits at your company. 　Laws / Regulations / Intellectual property ■ The transportation of dangerous goods as designated by UN numbers, UN classifications, etc., does not apply to this product. In addition, when exporting products, product specifications, and technical information described in this catalog, please comply with the laws and regulations of the countries to which the products are exported, especially those concerning security export control. ■ Each model of this product complies with the RoHS Directive (Restriction of the use of hazardous substances in electrical and electronic equipment) (2011/65/EU and (EU) 2015/863). The date of compliance with the RoHS Directive and REACH Regulation varies depending on the product model. Further, if you are using product models in stock and are not sure whether or not they comply with the RoHS Directive or REACH Regulation, please contact us by selecting "Sales Inquiry" from the inquiry form. ■ During the manufacturing process of this product and any of its components and materials to be used, Panasonic Industry does not intentionally use ozone-depleting substances stipulated in the Montreal Protocol and specific bromine-based flame retardants such as PBBs (Poly-Brominated Biphenyls) / PBDEs (Poly-Brominated Diphenyl Ethers). In addition, the materials used in this product are all listed as existing chemical substances based on the Act on the Regulation of Manufacture and Evaluation of Chemical Substances. ■ With regard to the disposal of this product, please confirm the disposal method in each country and region where it is incorporated into your company's product and used. 　 ■ The technical information contained in this catalog is intended to show only typical operation and application circuit examples of this product. This catalog does not guarantee that such information does not infringe upon the intellectual property rights of Panasonic Industry or any third party, nor imply that the license of such rights has been granted. ■ Design, materials, or process related to technical owned by Panasonic Industry are subject to change without notice. Panasonic Industry will assume no liability whatsoever if the use of our company's products deviates from the contents of this catalog or does not comply with the precautions. Please be advised of these restrictions. 10-May-24 Voltage Step-up Coils 　　Application Guidelines 1. Safety precautions ・ Make sure to exchange product specifications before using this product, regardless of the intended use. The design and specifications in this catalog are subject to change without prior notice. ・ Do not use the products beyond the specifications described in this catalog. ・ This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. ・ If a malfunction of this product may result in the loss of human life or other serious damage in transportation equipment (trains, automobiles, ships, etc.), signaling equipment, medical equipment, aerospace equipment, electric heating equipment, combustion and gas equipment, rotating equipment, disaster prevention and security equipment, and other equipment, ensure safety by implementing a fail-safe design with the following system. ✽ Systems equipped with a protection circuit and a protection device. ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault. 2. Precautions for use 2-1. Operation range and environments ① These products are designed and manufactured for general and standard use in general electronic　equipment (e.g. AV equipment, home electric appliances, office equipment, information and communication equipment) ② These products are not designed for the use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. ・In liquid, such as water, oil, chemicals, or organic solvent ・In direct sunlight, outdoors, or in dust ・In salty air or air with a high concentration of corrosive gas, such as Cl2，H2S，NH3，SO2，or NOx ・In an environment where these products cause dew condensation 2-2. Handling ① Do not bring magnets or magnetized materials close to the product. The influence of their magnetic field can change the inductance value. ② Do not apply strong mechanical shocks by either dropping or collision with other parts. Excessive schock can damage the part. 2-3. Resoldering with a soldering iron ① Resoldering should be done within 3 seconds by soldering iron, the temperature with 350 °C or less and should be cooling down after ward. Both side of terminals shall be fixed closely to PWB. And terminals shall not be pressed in heating. Don’t Press ② The wiring tab shall not be held by sharp-edged tool. Wiring Tab ③ Iron shall not be put to the component itself. 2-4. Mounting side ① External force must be less than 4.9N while mounting. ② The wiring tab is expose the terminal, so please be careful when you design PWB pattern of coil circumference. 2-5. Cleaning If ultrasonic cleaning is used, check the product with your equipment. 2-6. Storage conditions Normal temperature (‒5 to 35 ℃), normal humidity (85 %RH max.)，shall not be exposed to direct sunlight and harmful gases and care should be taken so as not to cause dew. ＜Package markings＞ Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. 10-Feb-23