ENW-49D01A1KF

PAN9520 Embedded Wi-Fi Module Product Specification Rev. 0.1 Wireless Connectivity PAN9520 Wi‑Fi Module Overview • 43x programmable GPIOs with a rich set of alternative functionalities: The PAN9520 is a 2.4 GHz ISM band Wi-Fi embedded module based on Espressif ESP32-S2, which includes a wireless radio and a MCU for easy integration of Wi-Fi connectivity into various electronic devices.            2× 12-bit SAR ADCs, up to 20 channels 2× 8-bit DAC 14× touch sensing IOs 4× SPI (2x available for general purpose) 1× I²S 2× I²C 2× UART RMT (Tx/Rx) LED PWM, up to 8 channels 1× full-speed USB OTG 1× DVP 8/16 camera interface (I²S resources used)  1× LCD interface (SPI2 resources used)  1× LCD interface (I²S resources used) Features • Embedded 2.4 GHz Wi-Fi 802.11 b/g/n module • Xtensa® single-core 32-bit LX7 microprocessor, up to 240 MHz • Chip internal 128 kB ROM, 320 kB SRAM, and 16 kB low power SRAM • Integrated QSPI Flash and PSRAM (density Characteristics dependents on product version) • Ultra-Low Power (ULP) co-processor usable in deep sleep mode • Surface Mount Type (SMT): 24 mm × 13 mm × 3.1 mm • All security features required for WPA2 and WPA3 personal • Espressif Integrated Development Framework (ESP-IDF) with a multitude of examples available for software development • Supports 20 MHz and 40 MHz bandwidths in • Tx power up to 19.5 dBm at IEEE 802.11b 1 Mbps • Rx sensitivity of -97 dBm at IEEE 802.11b 1 Mbps • Power supply 3 V to 3.6 V • Current consumption 190 mA Tx (average at 11b, 1 Mbps), 68 mA Rx (40 MHz channel), 310 mA Tx peak 2.4 GHz band with data rates up to 150 Mbps • Simultaneous support for Infrastructure Station, SoftAP, and promiscuous modes • Deep sleep mode