ER-F12S

1201 FIBER SENSORS Fan Type Ionizer High-frequency AC Method ER-F SERIES Related Information ■■General terms and conditions.............. F-7 ■■Glossary of terms.......................... P.1497 ■■Selection guide............................ P.1157~ ■■General precautions...................... P.1501 LASER SENSORS PHOTOELECTRIC SENSORS Conforming to EMC Directive MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS MEASUREMENT SENSORS panasonic.net/id/pidsx/global STATIC ELECTRICITY PREVENTION DEVICES HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS A compact shape for reducing workbench clutter Compact size of 150 × 166 × 62 mm (5.906 × 6.535 × 2.441 in) Low-volume fan type also available for various applications An ionizer with a 120 mm 4.724 in fan diameter that has a class leading compact size for reducing workbench clutter and increasing efficiency. Low-volume fan type with a suppressed fan speed of approx. half is available for charge removal in processes which involve handling of small parts or thin films. * Graphs represent typical values at 300 mm 11.811 in from directly in front of air outlet, straight louver, with no filter installed. Cleaning Box Electrostatic Sensor ER-X ER-TF 6.0 5.0 4.0 3.0 2.0 0.0 Selection Guide Static Removers Pulse Air-gun Standard fan type ER-F12 Low-volume fan type ER-F12S Fan speed (m/s) PLC Fan speed (m/s) LASER MARKERS 4 3 2 1 Fan speed select switch 6.0 5.0 4.0 3.0 2.0 0.0 4 3 2 1 Fan speed select switch Two exchangeable louvers to suit your needs Just simply replace the louver to change configuration between long distance and wide area ionization. The two louvers come with the ionizer main body. Straight louver Angle louver Removes charges quickly at long distance Removes charges completely in wide area ER-VS02 ER-VW ER-Q ER-F Fan Type Ionizer ER-F SERIES Remove the louver for effortless maintenance 1202 FIBER SENSORS Because the discharge needle unit is attached to the louver, exchange or maintenance of the needles is made easy without touching the main unit. A safe design where once the louver is removed, the high-voltage circuit and the fan will halt. LASER SENSORS PHOTOELECTRIC SENSORS MICRO PHOTOELECTRIC SENSORS AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS ORDER GUIDE SENSOR OPTIONS Type Appearance Standard fan type Charge removal time (±1,000 V   ±100 V) Ion balance ER-F12 ±10 V or less (Note 2) 1.5 sec. approx. (Note 1) Notes: 1) Typical value at 200 mm 7.874 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. 2) Typical value at 300 mm 11.811 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. ER-F12S MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES OPTIONS ENERGY CONSUMPTION VISUALIZATION COMPONENTS Model No. Description ER-FAPS-J2 (Note) IN: 100 to 240 V AC 50 / 60 Hz OUT: 24 V DC, 1.5 A Cable length between connector and AC adaptor: 1.8 m 5.905 ft AC cable: 125 V rated (an accessory to ER-FAPS-J2 only) Discharge needle unit ER-F12ANT Unit with tungsten needles (1 pc.) Air filter ER-F12FX5 Replacement filter (5 pcs. per set) AC adapter SIMPLE WIRE-SAVING UNITS WIRE-SAVING SYSTEMS 1 sec. approx. (Note 1) Low-volume fan type Type Model No. ER-FAPS-EX FA COMPONENTS MACHINE VISION SYSTEMS UV CURING SYSTEMS Note: Please prepare an AC cable separately as it is needed. Inlet configuration (IEC 60320-C13) APPLICATIONS Prevention of static charge in cell production Selection Guide Static Removers Cleaning Box Pulse Air-gun Electrostatic Sensor ER-X ER-TF ER-VS02 ER-VW ER-Q ER-F 1203 Fan Type Ionizer ER-F SERIES SPECIFICATIONS FIBER SENSORS LASER SENSORS Type PHOTOELECTRIC SENSORS Item MICRO PHOTOELECTRIC SENSORS Ion balance AREA SENSORS LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS Charge removal time (±1,000 V → ±100 V) WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS ±10 V or less (Note 3) 24 V DC ±10 % 700 mA or less Discharge output voltage ± 2 kV approx. Max. fan speed 5.3 m/s (Note 3) 4.0 m/s (Note 3) Max. fan volume 3.68 m3/min 2.50 m3/min NPN open-collector transistor • Max sink current: 50 mA • Applied voltage: 30 V DC or less (between output terminal and 0 V) • Residual voltage: 1 V or less (at input current of 50 mA) Error output Short-circuit protection Discharge halt input Indicators Discharge error (Red), Fan error (Red), Power (Green), Discharge (Green) Ozone generation amount 0.04 ppm or less (Note 2) Ambient temperature 0 to +50°C +32 to +122°F (No dew condensation) , Storage: –10 to +65°C +14 to +149°F Ambient humidity 35 to 65% RH (No dew condensation) , Storage: 35 to 65% RH Grounding method C (capacitor) grounding Material Enclosure: ABS, Louver: ABS, Discharge needle unit: PBT, Discharge needle: Tungsten, Bracket: SPHC Weight 4 Main unit: 790 g approx. Accessories Straight louver: 1 pc. (Note 4), Angle louver: 1 pc., Caution label: 1 set, Rubber cushion: 1 pc. Notes: 1) Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20 °C +68 °F. 2) Typical value at 200 mm 7.874 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. 3) Typical value at 300 mm 11.811 in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. 4) The discharge needle unit is loaded on the straight louver before shipment. I/O CIRCUIT AND WIRING DIAGRAMS I/O circuit diagram D1 2 D2 Main circuit ZD 10 kΩ +5 V Connector terminal arrangement D3 4 5 1 ER-VW ER-Q ER-F Error output Load Discharge halt input *1 4 3 2 1 (From cable insertion side) + − 30 V DC max. 24 V DC ±10 % 0V F.G. Terminal No. Color code 1 F.G. 2 +V 3 0V 4 Error output 5 Discharge halt input Recommended wiring cable * 1 Non-voltage contact or NPN open-collector transistor or ER-VS02 5 +V 50 mA max. Static Removers ER-TF Incorporated Discharge halt: Short-circuited to 0 V Discharge (operation start): Open 3 ER-X OFF when discharge error or fan error detected Normally ON Output operation Selection Guide Electrostatic Sensor 400 mA or less High-frequency AC method Tr Pulse Air-gun 1.5 sec. approx. (Note 2) Discharge method UV CURING SYSTEMS Cleaning Box ER-F12S 1 sec. approx. (Note 2) Power consumption FA COMPONENTS MACHINE VISION SYSTEMS Low-volume fan type ER-F12 Power supply voltage SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS Standard fan type Model No. Low (0 V): Discharge halt High (Open): Discharge (Operation starts) Symbols … D1 : Reverse supply polarity protection diode D2 : Output protection diode D3 : Input protection diode ZD : Surge absorption zener diode Tr : NPN output transistor Compatible wire: 25 AWG to 12 AWG (nominal crosssectional area: 0.16 to 3.3 mm2) Wire stripping length: 7 mm (see below) 7mm 0.276 in Note: D  o not solder-plate the ends of wires being connected to connectors. Doing so may result in loosening of tightened screws, causing the wire to come loose. Fan Type Ionizer ER-F SERIES 1204 CHARGE REMOVAL CHARACTERISTICS (TYPICAL) FIBER SENSORS LASER SENSORS Measured using a 150 mm × 150 mm 5.906 in × 5.906 in CPM (charge plate monitor) (At center of CPM) ER-F12 ER-F12S PHOTOELECTRIC SENSORS Solid lines in the graphs show ER-F12. Dotted lines show ER-F12S. 400 15.748 300 11.811 200 7.874 100 3.937 0 -100 -3.937 -200 -7.874 -300 -11.811 -400 -15.748 0 2 sec. 5 sec. 10 sec. CPM L – + W 200 400 600 800 1000 1200 1400 1600 7.874 15.748 23.622 31.496 39.370 47.244 55.118 62.992 Charge removal distance L (mm in) MICRO PHOTOELECTRIC SENSORS Charge removal field (Fan speed MAX, angle louver is mounted) Charge removal width W (mm in) Charge removal width W (mm in) Charge removal field (Fan speed MAX, straight louver is mounted) 400 15.748 300 11.811 200 7.874 100 3.937 0 -100 -3.937 -200 -7.874 -300 -11.811 -400 -15.748 0 AREA SENSORS 2 sec. 5 sec. 10 sec. LIGHT CURTAINS / SAFETY COMPONENTS PRESSURE / FLOW SENSORS INDUCTIVE PROXIMITY SENSORS PARTICULAR USE SENSORS 200 400 600 800 1000 1200 1400 1600 7.874 15.748 23.622 31.496 39.370 47.244 55.118 62.992 Charge removal distance L (mm in) SENSOR OPTIONS SIMPLE WIRE-SAVING UNITS PRECAUTIONS FOR PROPER USE Refer to p.1501 for general precautions. • Never use this product in a device for personnel protection. • In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. • Do not use this product in places where there may be a danger of flammable or combustible items being present. • If this product is used in an airtight room, ozone emitted from this product may be detrimental. Therefore, in order for this product to be used in an airtight room, be sure to keep the room ventilated. DIMENSIONS (Unit: mm in) • Since the tip of the discharge needle is sharp, take sufficient care in handling the discharge needle. • Clean the discharge needle regularly, otherwise optimum charge removal performance may not be obtained and fire or operating problems may occur. • Be sure to ground the frame ground (F.G.) terminal. WIRE-SAVING SYSTEMS MEASUREMENT SENSORS STATIC ELECTRICITY PREVENTION DEVICES LASER MARKERS PLC HUMAN MACHINE INTERFACES ENERGY CONSUMPTION VISUALIZATION COMPONENTS FA COMPONENTS MACHINE VISION SYSTEMS The CAD data in the dimensions can be downloaded from our website. ER-F12  ER-F12S UV CURING SYSTEMS Ionizer main unit Selection Guide Static Removers Cleaning Box 142 5.591 62 2.441 Air outlet Air inlet M5 screw for fixing the air direction 150 5.906 166 6.535 Fan speed select switch 150 5.906 161 6.339 3-ø5.5 ø0.217 75 2.953 Fan error indicator (Red) Discharge error indicator (Red) Power indicator (Green) 5.5 0.217 ER-TF 100 3.937 Discharge indicator (Green) ø100 ø3.937 Electrostatic Sensor ER-X Power switch 45° Pulse Air-gun ER-VS02 Bracket 60 2.362 ER-VW Power connector ER-Q ER-F