ERD-S2TYJ152T

Carbon Film Resistors Carbon Film Resistors Type: ERDS1 (0.5 W) ERDS2 (0.25 W) ERD25 (0.25 W) ■ Features ● ● ● ● ●  Discontinued Reliability .................... Automatic insertion .... Marking ...................... Flame Retardant ........ Reference Standard ... High reliability by using carbon film Taping style for automatic inserting machines 4 color code marking Using UL 94 V-0 approved coating for flame retardant type IEC 60115-2, JIS C 5201-2 ■ Explanation of Part Numbers Product Code Carbon Film Resistors 1 2 3 4 5 6 7 8 9 10 11 E R D S 1 T J 1 0 3 T Power Rating at 70 °C Amb. 0.5 W S1 0.25 W S2 0.25 W 25 Special Feature and/or Cut & Formed Style (Type) T V, FV F Standard (Straight leads) Radial formed (S1, 25) Flame-retardant Resistance Value Resistance Tolerance J 0 The first two digits are significant figures of resistance and the third one denotes number of zeros following. Decimal point expressed by R as 4.7 액= 4R7. (*Nil for Jumper) ±5 % Jumper Suffix for Packaging and /or Cut & Formed Leads Nil T V P ■ Construction Standard bulk packing Standard taped box (26 mm axial or Radial) Standard taped & box (52 mm axial) Lead formed Flame retardant ■ Dimensions in mm (not to scale) H L fD H Primary coating Lead wire 1st significant figure. Spiralling fd 2nd significant figure. Multiplier Carbon film (Metal film for 4.3 액 or less) Insulative coating Tolerance See Page ER131 for color code indication Standard Quantity : 2000 pcs. Standard: Epoxy resin H Mass (Weight) [mg/pc.] 20 min. 228 20 min. 107 20 min. 228 Dimensions (mm) Flame retardant Silicone resin (UL94V-0 approved) High thermal conductive ceramic core End cap Marking Type L fD fd ERDS1T ERDS1F 6.35 –0.35 2.30 –0.30 0.60 ERDS2T ERDS2F 3.20 ERD25T ERD25F 6.35 –0.35 2.30 –0.30 0.60 +0.65 ±0.20 +0.65 +0.50 +0.20 1.70 –0.10 +0.50 0.45 ±0.05 ±0.05 ±0.05 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Feb. 2006  Discontinued Carbon Film Resistors ■ Ratings Type Power Rating at 70 °C (W) Limiting Element Voltage (Maximum (1) RCWV) (V) Maximum Dielectric Maximum Standard Resistance Intermittent Overload Withstanding (2) Resistance Tolerance Overload (3) Voltage Voltage (%) Value Voltage (VAC) (V) (V) 0.5 300 600 E24 1 1 M 300 250 500 2.2 M 750 E24 ±5(J) 1 200 Jumper ERDS2T0 Rated Current : 2 A, 1 M Resistance : < 50 m액 500 ERD25T ERD25F (Flame Retardant) ±5(J) 350 0.25 0.25 300 600 3.3 M 750 E24 ±5(J) 1 350 Jumper ERD25T0 max. 3.3 M 750 ERDS2T ERDS2F (Flame Retardant) min. 500 ERDS1T ERDS1F (Flame Retardant) Resistance Range (액) Rated Current : 2 A, 1 M Resistance : < 50 m액 (1) Rated Voltage=앀Power Rating҂Resistance Value or Limiting Element Voltage (max. RCWV), whichever is less. (RCWV: Rated Continuous working Voltage). (2) Overload (Short-time Overload) Test Voltage (SOTV) shall be determined from SOTV=2.5҂Power Rating or max. Overload Voltage listed above whichever less. (3) Intermittent Overload Test Voltage (IOTV) shall be determined from IOTV=4҂Power Rating (IOTV=3҂Power Rating for ERDS2 type) or max. Intermittent Overload Voltage listed above whichever less. 120 Rated Load (%) Power Derating Curve For resistors operated in ambient temperatures above 70 °C, power rating shall be derated in accordance with the figure on the right. 100 –55 °C 70 °C 80 60 40 20 155 °C 0 –60 –40 –20 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (°C) ■ Performance Specifications Characteristics Specifications Resistance Value range T.C.R. ERDS2 ERDS1, 25 4.3 액 or less 4.3 액 or less Test Methods Temperature coefficient –6 ҂10 /°C (ppm/°C) ±350 4.7 액 to 62 k액 4.7 액 to 51 k액 –150 to –350 68 k액 to 200 k액 56 k액 to 430 k액 –150 to –500 220 k액 to 510 k액 470 k액 to 910 k액 –150 to –700 560 k액 or over 1 M액 or over –150 to –1000 Resistance value at room temperature and room temperature +100 °C Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. Feb. 2006  Discontinued Carbon Film Resistors ■ Shape and Packaging ● Bulk type (Lead forming) Standard forming Type D Part Numbers Std. Qty. (PCS) ERDS2TJ첸첸첸A d Carbon Film R H L P ERD25TJ첸첸첸B fD L 3.2±0.2 2000 1.7 +0.65 +0.5 6.35 –0.35 ERDS1TJ첸첸첸B P +0.2 –0.1 2.3 –0.3 H d +1.5 –0.5 5.0±0.5 4.5 10.0±0.5 4.5–0.5 0.45 +1.5 0.6 Radial forming H h L d Lead Insulation Coating k k Type Part Numbers Std. Qty. (PCS) Carbon Film R ERD25VJ첸첸첸 ERD25FVJ첸첸첸 ERDS1VJ첸첸첸 ERDS1FVJ첸첸첸 2000 Type Part Numbers Std. Qty. (PCS) L Carbon Film R ERD25FJ첸첸첸P ERDS1FJ첸첸첸P 2000 6.35 –0.35 fD L +0.65 H h +0.5 k 6.35 –0.35 2.3 –0.3 20 min. 9.5 min. 2.0 j ±0.5 d +2.0 6.0 –1.0 0.6 j Self standing form D h d L 6.5±1.0 P 3.5±1.0 fD +0.65 +0.5 2.3 –0.3 P h d 10.0±1.5 11.5±1.0 0.65 0.8 ● Axial taping type Shape 6±1 L 0.5 max. 0 L1 0.8 max. L2 1 max. P fD P 0.5 max. fd 3.2 min. 1 2 3 4 L max. 3.4 3.4 6.5 6.5 fD max. 1.9 1.9 2.5 2.5 fd 0.45 0.45 0.6 0.6 P ±0.3 5.0 5.0 5.0 5.0 W W0 26+1 –0 52±1 +1 26 – 0 52±1 41.5 max. 64.5±0.5 41.5 max. 64.5±0.5 쪧 |L1– L 2|