ERJ-1WYF334U

Thick Film Chip Resistors Thick Film Chip Resistors 0201, 0402, 0603, 0805, 1206, 1210, 1812, 2012, 2512 Type: ERJ 1G, 2G, 3G, 6G, 8G, 14, 12, 12Z, 1W, 1WZ n Features l Small size and lightweight For PCB size reduction and lightweight products l High reliability Metal glaze thick film resistive element and three layers of electrodes result in high reliability l Matching with placement machine Taping and bulk case packagings for automatic placement machine l Solderability Suitable for both reflow soldering and flow soldering l Approved under the ISO 9001 system Approved under the QS-9000 system l Reference Standards IEC 60115-8, JIS C 5201-8, EIAJ RC-2134A n Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E R J 3 G E Y J 1 0 2 V Product Code Thick Film Chip Resistors Size, Power Rating Type : inches Power R. 0.05 W 1GE : 0201 0.063 W 2GE : 0402 0.1 W 3GE : 0603 0.125 W 6GE : 0805 0.25 W 8GE : 1206 0.25 W 14 : 1210 0.5 W 12 : 1812 0.5 W 12Z : 2010 1W 1W : 2512 1W 1WZ : 2512 Code Y ＊Nil Marking Marking Value Marking on black side No marking Resistance Tolerance Code J 0 Tolerance 5% Jumper Packaging Methods Packaging Code Punched (Paper) Taping V U Embossed Taping (Only 14, 12, 12Z, 1W,1WZ type) B Bulk case (Only 2G, 3G, 6G type) X Punched (Paper) Taping 2 mm pitch (Only 1G, 2G,3G type) Resistance Value The first two digits are significant figures of resistance and the third one denotes number of zeros following. Decimal Point is expressed by R as 4.7 = 4R7. Jumper is expressed by R00. ] When omitted, all the rest P/N factors shall be moved up respectively. Design and specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation. Thick Film Chip Resistors n Dimensions in mm (not to scale) n Construction L a Protective coating W High purity alumina substrate Termination (Inner) b Type (inches) Termination (Between) Resistive element ERJ1G (0201) ERJ2G (0402) ERJ3G (0603) ERJ6G (0805) ERJ8G (1206) ERJ14 (1210) ERJ12 (1812) ERJ12Z (2010) ERJ1W (2512) ERJ1WZ (2512) Termination (Outer) Dimensions (mm) W 0.60±0.03 0.30±0.03 0.15±0.05 0.15±0.05 0.25±0.05 0.15 g 1.00±0.05 0.50±0.05 0.20±0.10 0.25±0.05 0.35±0.05 0.8 g 1.60±0.15 0.80+0.15 0.30±0.20 0.30±0.15 Ð0.05 0.45±0.10 2g 2.00 1.25 ±0.10 0.60 4g 1.60+0.05 0.50±0.20 0.50±0.20 3.20+0.05 Ð0.20 Ð0.15 0.60±0.10 10 g 3.20±0.20 2.50±0.20 0.50±0.20 0.50±0.20 0.60±0.10 16 g 4.50±0.20 3.20±0.20 0.50±0.20 0.50±0.20 0.60±0.10 27 g 5.00 2.50 0.60 0.60 0.60 27 g 6.40 3.20 0.65 1.30 ±0.10 1.10 79 g 6.40±0.20 3.20±0.20 0.65±0.20 0.60±0.20 0.60±0.10 45 g ±0.20 ±0.20 ±0.20 a ±0.10 ±0.20 ±0.20 b Weight (1000 pcs.) L 0.40 ±0.20 ±0.20 ±0.20 0.40 ±0.20 ±0.20 ±0.20 t ±0.10 n Ratings Type (inches) ERJ1G (0201) ERJ2G (0402) ERJ3G (0603) ERJ6G (0805) ERJ8G (1206) ERJ14 (1210) ERJ12, 12Z (1812, 2010) ERJ1W (2512) ERJ1WZ (2512) Power Rating Limiting Element Voltage (Maximum at 70 ¡C RCWV)(1) (V) (W) Maximum Overload Voltage(2) (V) Resistance Tolerance(%) Resistance Range (W) min. max. 0.05 15 30 ±5 10 1 M 0.063 50 100 ±5 1 2.2 M 0.1 50 100 ±5 1 10 M 0.125 150 200 ±5 1 10 M 0.25 200 400 ±5 1 10 M 0.25 200 400 ±5 1 10 M 0.5 200 400 ±5 1 10 M 1 250 500 ±5 1 1 M 1 200 400 ±5 1 1 M T.C.R. ´10-6/¡C (ppm/¡C)