ERJ-2GE0R00X

Thick Film Chip Resistors Thick Film Chip Resistors Type: ERJ XG, 1G, 2G, 3G, 6G, 8G, 14, 12, 12Z, 1T Features ● Small size and lightweight reliability Metal glaze thick film resistive element and three layers of electrodes ● Compatible with placement machines Taping packaging available ● Suitable for both reflow and flow soldering ● Reference Standards IEC 60115-8, JIS C 5201-8, JEITA RC-2134C ● AEC-Q200 qualified (Exemption ERJXG) ● RoHS compliant ● High ■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers ● ERJXGN, 1GN, 2GE, 3GE, 6GE, 8GE, 14, 12, 12Z, 1T Series, ±5 % 1 2 3 4 5 6 7 8 9 10 11 12 E R J 3 G E Y J 1 0 2 V Product Code Thick Film Chip Resistors Size, Power Rating Code Inch Power R. XGN 01005 0.031 W 0.05 W 1GN 0201 0.1 W 2GE 0402 0.1 W 3GE 0603 6GE 0805 0.125 W 0.25 W 8GE 1206 0.5 W 14 1210 0.75 W 12 1812 0.75 W 12Z 2010 1W 1T 2512 Code Resistance Tolerance Marking Marking Code J 0 Tolerance ±5 % Jumper Code Packaging Methods Packaging Part No. Y Pressed Carrier Taping W8P2, 20,000 pcs. U Embossed Carrier Taping W4P1, 40,000 pcs. Resistance Value C Pressed Carrier Taping 2 mm pitch, 15,000 pcs. ERJ1GN The first two digits are significant figures of resistance and the third one denotes number of zeros following. Decimal Point is expressed by R as 4.7 = 4R7. Jumper is expressed by R00. X Punched Carrier Taping 2 mm pitch, 10,000 pcs. Y Punched Carrier Taping 2 mm pitch, 20,000 pcs. V Punched Carrier Taping 4 mm pitch, 5,000 pcs. Y ✽Nil Value Marking on black side No marking ✽ Series XGN, 1GN and 2GE do not have value markings on the black side. Please omit the letter "Y" from the part number for these series of parts. The other part number factors will move up respectively. U ERJXGN ERJ2GE ERJ3GE ERJ6GE ERJ8GE ERJ14 Embossed Carrier Taping ERJ12 4 mm pitch, 5,000 pcs. ERJ12Z Embossed Carrier Taping ERJ1T 4 mm pitch, 4,000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 08 Feb. 2019 Thick Film Chip Resistors Construction Dimensions in mm (not to scale) L a W Protective coating Electrode (Inner) Alumina substrate t b Dimensions (mm) L W a b t Mass (Weight) (g/1000 pcs.) ERJXG 0.40±0.02 0.20±0.02 0.10±0.03 0.10±0.03 0.13±0.02 0.04 ERJ1G 0.60 ±0.03 ±0.03 ±0.05 ±0.05 ERJ2G Part No. Electrode (Between) Thick film resistive element Electrode (Outer) 0.30 0.10 0.15 0.23±0.03 0.15 1.00±0.05 0.50±0.05 0.20±0.10 0.25±0.05 0.35±0.05 0.8 ±0.15 +0.15 –0.05 ±0.20 ±0.15 ±0.10 ERJ3G 1.60 0.80 0.30 0.30 0.45 ERJ6G 2.00±0.20 1.25±0.10 0.40±0.20 0.40±0.20 0.60±0.10 4 ERJ8G –0.20 3.20+0.05 –0.15 1.60+0.05 0.50±0.20 0.50±0.20 0.60±0.10 10 ERJ14 3.20±0.20 2.50±0.20 0.50±0.20 0.50±0.20 0.60±0.10 16 ERJ12 4.50±0.20 3.20±0.20 0.50±0.20 0.50±0.20 0.60±0.10 27 ±0.20 ±0.20 ±0.20 ±0.20 ±0.10 ERJ12Z 5.00 ERJ1T 6.40±0.20 2 2.50 0.60 0.60 0.60 27 3.20±0.20 0.65±0.20 0.60±0.20 0.60±0.10 45 Ratings [For Resistor] Part No. (inch size) Power Rating (3) Limiting Element Maximum Overload Resistance Voltage (1) Voltage (2) at 70 °C Tolerance (W) (V) (V) (%) Resistance Range (Ω) T.C.R. (×10–6/°C) Category AEC-Q200 Temperature Range Grade (°C) ERJXG (01005) 0.031 15 30 ±5 ERJ1G