ERJ-S03J623V

Anti-Sulfurated Thick Film Chip Resistors Anti-Sulfurated Thick Film Chip Resistors ERJ S : 0402, 0603, 0805, 1206, 1210, 1812, 2010, 2512 ERJ U : 0201, 0402, 0603, 0805, 1206, 1210, 1812, 2010, 2512 Type: ERJ S02, S03, S06, S08, S14 S12, S1D, S1T (Au-based inner electrode type) Type: ERJ U01, U02, U03, U06, U08, U14, U12, U1D, U1T (Ag-Pd-based inner electrode type) ■ Features ● High resistance to sulfurization achieved by adopting an Au-based inner electrode (ERJS type) and Ag-Pd-based inner electrode (ERJU type) ● High reliability Metal glaze thick film resistive element and three layers of electrodes ● Suitable for both reflow and flow soldering ● Reference Standard…IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B ● RoHS compliant Please see Pages 40 to 43 ■Packaging Methods ■Recommended Soldering Conditions Please see Page 46 ■Recommended Land Pattern ■Safety Precautions Please see Pages 44 to 45 Please see Page 47 ■ Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E R J S 0 6 F 1 0 0 2 V Resistance Tolerance Product Code Thick FilmChip Resistors Size, Power Rating Power R. Type: inch Type: inch U01 : 0201 S02 U02 : 0402 S03 U03 : 0603 S06 U06 : 0805 S08 U08 : 1206 0.05 W 0.1 W 0.1 W 0.125 W S14 U14: 1210 S12 U12 : 1812 S1D U1D : 2010 S1T U1T : 2512 Code F J 0 Power R. 0.5 W Code Tolerance ±1% ±5% Jumper C X 0.75 W Resistance Value V 0.75 W The first two or three digits are significant figures of resistance and the third or 4th one denotes number of zeros following. Jumper is expressed by R00. Three digit type (±5%), four digit type (±1%) Example: 222촞2.2 k액, 1002촞10 k액 U 1W 0.025 W ■ Construction Packaging Methods Packaging Type Pressed Carrier Taping ERJU01 2 mm pitch, 15,000 pcs. Punched Carrier Taping 2 mm pitch, 10,000 pcs. ERJS02, ERJU02 Punched Carrier Taping ERJS03, ERJU03 4 mm pitch, 5,000 pcs. ERJS06, ERJU06 ERJS08, ERJU08 Embossed Carrier Taping ERJS14, ERJU14 4 mm pitch, 5,000 pcs. ERJS12, ERJU12 ERJS1D, ERJU1D Embossed Carrier Taping 4 mm pitch, 4,000 pcs. ERJS1T, ERJU1T ■ Dimensions in mm (not to scale) L a W Protective coating Alumina substrate t Electrode (Inner) Au-based : ERJS type b Type (inch size) Ag-Pd-based: ERJU type Electrode (Between) Thick film resistive element Electrode (Outer) Dimensions (mm) L W a b ERJU01 (0201) 0.60±0.03 0.30±0.03 0.10±0.05 0.15±0.05 0.23±0.03 0.15 ERJS02 (0402) ERJU02 ERJS03 (0603) ERJU03 ERJS06 (0805) ERJU06 ERJS08 (1206) ERJU08 ERJS14 (1210) ERJU14 ERJS12 (1812) ERJU12 ERJS1D (2010) ERJU1D ERJS1T (2512) ERJU1T 1.00±0.05 0.50±0.05 0.20±0.10 0.25±0.10 0.35±0.05 0.8 ±0.15 1.60 ±0.20 2.00 +0.05 –0.20 3.20 ±0.20 3.20 ±0.20 4.50 ±0.20 5.00 ±0.20 6.40 +0.15 –0.05 0.80 ±0.10 1.25 +0.05 –0.15 1.60 ±0.20 2.50 ±0.20 3.20 ±0.20 2.50 ±0.20 3.20 ±0.20 0.30 ±0.20 0.40 ±0.20 0.50 ±0.20 0.50 ±0.20 0.50 ±0.20 0.60 ±0.20 0.65 ±0.15 0.30 ±0.20 0.40 ±0.20 0.50 ±0.20 0.50 ±0.20 0.50 ±0.20 0.60 ±0.20 0.60 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. – 29 – Downloaded from Elcodis.com electronic components distributor Mass (Weight) [g/1000 pcs.] t ±0.10 2 ±0.10 4 ±0.10 10 ±0.10 16 ±0.10 27 ±0.10 27 ±0.10 45 0.45 0.60 0.60 0.60 0.60 0.60 0.60 01 Mar. 2011 Anti-Sulfurated Thick Film Chip Resistors ■ Ratings Type (inch size) PowerRating at 70 °C (W) Limiting Element Voltage (1) (V) Maximum Overload Voltage (2) (V) ERJU01 (0201) 0.05 25 50 ERJS02 ERJU02 (0402) 0.1 ERJS03 ERJU03 (0603) 0.1 ERJS06 ERJU06 (0805) 0.125 ERJS08 ERJU08 (1206) 0.25 ERJS14 ERJU14 (1210) 0.5 ERJS12 ERJU12 (1812) 0.75 ERJS1D ERJU1D (2010) 0.75 ERJS1T ERJU1T (2512) 1.0 50 Resistance Tolerance (%) Resistance Range (액) ±1 10 to 1 M (E24, E96) ±5 1 to 1 M T.C.R. (҂10 -6 /°C ) -55 to +125 (E24) ±1 10 to 1 M (E24, E96) ±5 1 to 3.3 M (E24) ±1 10 to 1 M (E24, E96) ±5 1 to 10 M (E24) ±1 10 to 1 M (E24, E96) ±5 1 to 10 M (E24) 100 75 -55 to +155 150 150 200 200 ±1 10 to 1 M (E24, E96) ±5 1 to 10 M (E24) ±1 10 to 1 M (E24, E96) ±5 1 to 10 M (E24) ±1 10 to 1 M (E24, E96) ±5 1 to 10 M (E24) 400 200 400 200 500 200