ERJ14YJ2R7U

Thick Film Chip Resistors ERJ type ERJ XG, 1G, 2G, 3G, 6G series ERJ 8G, 14, 12, 12Z, 1T series (Oct. 2021) Products marked as “NRFND” are not recommended for new design. Target products : ERJ8G, 14, 12, 12Z, 1T series Please refer to the recommended alternatives with ”Design Support Tool” ・ Features ● Small size and lightweight : Metal glaze thick film resistive element and three layers of electrodes ● High reliability : Taping packaging available ● Compatible with placement machines ● Suitable for both reflow and flow soldering ● Reference standard : IEC 60115-8，JIS C 5201-8，JEITA RC-2134C ● AEC-Q200 compliant (except ERJXG, ERJ1GN) ● RoHS compliant ■ As for packaging methods, land pattern, soldering conditions and safety precautions, please see data files. Explanation of part numbers Note : Please check the "Ratings" for the presence/absence of part numbers for combinations of the symbols below. ● ERJ XGN, 1GN, 1GJ, 2GE, 3GE, 6GE, 8GE, 14, 12, 12Z, 1T series，±5 % 1 2 3 4 5 6 7 8 9 10 E R J 3 G E Y J 1 0 Size, Power rating Product code Code inch Power rating Thick film chip resistors XGN 01005 1GN 1GJ 0201 2GE 0402 NRFND NRFND 0.031 W 0.05 W Marking Resistance tolerance Code Marking Code Tolerance Y Value marking on black side J ±5 ％ 0 Jumper *Nil No marking 0.1 W 3GE 0603 0.1 W 6GE 0805 0.125 W 8GE 1206 0.25 W 14 1210 0.5 W NRFND 12 1812 0.75 W NRFND 12Z 2010 0.75 W NRFND 1T 2512 1W 11 12 V 2 Resistance value The first two digits are significant figures of resistance and the third one denotes number of zeros following. Jumper is expressed by R00. (Ex.) 222 : 2.2 kΩ 　　　 4R7 : 4.7 Ω Packaging methods Code Packaging Y Pressed carrier taping W8P2, 20,000 pcs U Embossed carrier taping W4P1, 40,000 pcs C Pressed carrier taping 2 mm pitch, 15,000 pcs ERJ1GN ERJ1GJ X Punched carrier taping 2 mm pitch, 10,000 pcs ERJ2GE ERJXGN V The other part number factors will move up respectively. ERJ3GE Punched carrier taping 4 mm pitch, 5,000 pcs Embossed carrier taping 4 mm pitch, 5,000 pcs * Series XGN, 1GN, 1GJ and 2GE do not have value markings on the black side. Please omit the letter "Y" from the part number for these series of parts. Part No. U Embossed carrier taping 4 mm pitch, 4,000 pcs ERJ6GE NRFND ERJ8GE NRFND ERJ14 NRFND ERJ12 NRFND ERJ12Z NRFND ERJ1T * For the automotive application, please use ERJ1GJ as 0201 inch size from the new design. Not recommended for new design Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 22-Dec-22 Thick Film Chip Resistors Ratings 【For Resistor】 Part No. (inch size) Rated power*1 (70 ℃) (W) Limiting element voltage*2 (V) Maximum overload voltage*3 (V) ERJXG (01005) 0.031 15 30 ERJ1GN (0201) ERJ1GJ (0201) ERJ2G (0402) ERJ3G (0603) ERJ6G (0805) ERJ8G (1206) ERJ14 (1210) ERJ12 (1812) ERJ12Z (2010) ERJ1T (2512) Resistance range (Ω) Resistance tolerance (%) Category temperature range (℃) T.C.R. (×10-6/K) AEC-Q200 Grade R