ERJ3GEYJ225V

Thick Film Chip Resistors Thick Film Chip Resistors Type: ERJ XG, 1G, 2G, 3G, 6G, 8G, 14, 12, 12Z, 1T Features ● Small size and lightweight reliability Metal glaze thick film resistive element and three layers of electrodes ● Compatible with placement machines Taping packaging available ● Suitable for both reflow and flow soldering ● Reference Standards IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B ● AEC-Q200 qualified (Exemption ERJXG) ● RoHS compliant ● High ■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers ● ERJXGN, 1GN, 2GE, 3GE, 6GE, 8GE, 14, 12, 12Z, 1T Type, ±5 % 1 2 3 4 5 6 7 8 9 10 11 12 E R J 3 G E Y J 1 0 2 V Product Code Thick Film Chip Resistors Size, Power Rating Code Inch Power R. XGN 01005 0.031 W 0.05 W 1GN 0201 0.1 W 2GE 0402 0.1 W 3GE 0603 6GE 0805 0.125 W 0.25 W 8GE 1206 0.5 W 14 1210 0.75 W 12 1812 0.75 W 12Z 2010 1W 1T 2512 Code Resistance Tolerance Marking Marking Code J 0 Tolerance ±5 % Jumper Code Packaging Methods Packaging Part No. Y Pressed Carrier Taping W8P2, 20,000 pcs. U Embossed Carrier Taping W4P1, 40,000 pcs. Resistance Value C Pressed Carrier Taping 2 mm pitch, 15,000 pcs. ERJ1GN The first two digits are significant figures of resistance and the third one denotes number of zeros following. Decimal Point is expressed by R as 4.7 = 4R7. Jumper is expressed by R00. X Punched Carrier Taping 2 mm pitch, 10,000 pcs. Y Punched Carrier Taping 2 mm pitch, 20,000 pcs. V Punched Carrier Taping 4 mm pitch, 5,000 pcs. Y ✽Nil Value Marking on black side No marking ✽ When omitted, the rest of the P/N factors shall be moved up respectively. (Only XGN, 1GN, 2GE type) U ERJXGN ERJ2GE ERJ3GE ERJ6GE ERJ8GE ERJ14 Embossed Carrier Taping ERJ12 4 mm pitch, 5,000 pcs. ERJ12Z Embossed Carrier Taping ERJ1T 4 mm pitch, 4,000 pcs. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 07 Aug. 2018 Thick Film Chip Resistors Construction Dimensions in mm (not to scale) L a W Protective coating Electrode (Inner) Alumina substrate t b Dimensions (mm) Part No. Electrode (Between) Thick film resistive element Electrode (Outer) Mass (Weight) (g/1000 pcs.) L W a b t ERJXG 0.40±0.02 0.20±0.02 0.10±0.03 0.10±0.03 0.13±0.02 0.04 ERJ1G 0.60 ±0.03 ±0.03 0.30 0.10 ±0.05 0.15 ±0.05 0.23 ±0.03 0.15 ERJ2G 1.00±0.05 0.50±0.05 0.20±0.10 0.25±0.05 0.35±0.05 0.8 ERJ3G 1.60 ±0.15 +0.15 –0.05 ±0.20 ±0.15 ±0.10 ERJ6G 2.00 ±0.20 0.40 0.60 4 ERJ8G 3.20+0.05 –0.20 1.60+0.05 0.50±0.20 –0.15 0.50±0.20 0.60±0.10 10 ERJ14 3.20±0.20 2.50±0.20 0.50±0.20 0.50±0.20 0.60±0.10 16 ERJ12 4.50 ±0.20 ±0.20 ±0.20 ±0.20 0.60±0.10 27 ERJ12Z 5.00 ±0.20 ±0.20 ±0.10 ERJ1T 6.40±0.20 0.80 ±0.10 1.25 3.20 ±0.20 0.30 ±0.20 0.40 0.50 ±0.20 0.30 ±0.20 0.50 0.45 2 ±0.10 2.50 0.60 0.60 0.60 27 3.20±0.20 0.65±0.20 0.60±0.20 0.60±0.10 45 Ratings [For Resistor] Part No. (inch size) Power Rating (3) Limiting Element Maximum Overload Resistance Voltage (1) Voltage (2) at 70 °C Tolerance (W) (V) (V) (%) Resistance Range (Ω) T.C.R. (×10–6/°C) Category AEC-Q200 Temperature Range Grade (°C) ERJXG (01005) 0.031 15 30 ±5 1 to 1M (E24) ERJ1G