ERJMP3MF33MU

Current Sensing Resistors, Metal Plate Type Current Sensing Resistors, Metal Plate Type Type: ERJ MP2, MP3, MP4 Features ● Ideal for current sensing solution ● Small case size with high power ● Metal plate bonding technology. Excellent long term stability ● Outer Resin with high heat dissipation. Wide temperature range ● AEC-Q200 qualified ● RoHS compliant ● ISO9001, ISO/TS16949 certified (−65 °C to +170 °C) ■ As for Packaging Methods, Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E R J M P 4 P F 1 0 M U Product Code Metal Plate Chip Resistors Type Code Code Inch size 1206 P2 2010 P3 2512 P4 Power Rating Code Rating K 0.5 W M 1W P 2W Q 3W Resistance Tolerance Code Tolerance ±1 % F Resistance Value Shown by 3 digits or letters.Decimal point is expressed by M as 2M0=2m Ω 10M=10m Ω Code U Packaging Methods Packaging Embossed Carrier Taping 4 mm pitch, 3,000 pcs. Embossed Carrier Taping 4 mm pitch, 2,000 pcs. Part No. ERJMP2 ERJMP3 ERJMP4 Ratings Part No. (inch size) ERJMP2K (1206) ERJMP2M (1206) ERJMP3K (2010) ERJMP3M (2010) ERJMP3P (2010) ERJMP4M (2512) ERJMP4P (2512) ERJMP4Q (2512) Power Rating at 70 °C (W) 0.5 1 0.5 1 2 1 2 3 Resistance Range✽1 (mΩ) 1 to 50 1 to 33 1 to 50 1 to 33 1 to 10 1 to 50 1 to 33 1 to 5 Resistance Tolerance (%) T.C.R.✽2 (×10–6/°C) Category Temperature Range (°C) F : ±1 ±75 –65 to +170 F : ±1 ±75 –65 to +170 F : ±1 ±75 –65 to +170 ✽1 Regular resistance : 1m Ω, 2m Ω, 3m Ω, 5m Ω, 10m Ω, 15m Ω, 20m Ω, 22m Ω, 25m Ω, 30m Ω, 33m Ω, 50m Ω Please contact us when resistors of irregular series are needed. ✽2 Please contact us when T.C.R. assurance within ±50×10-6/°C is needed. 120 Rated Power (%) Power Derating Curve If the ambient temperature of the resistor is more than ambient temperature upper limit value of the rated table, please reduce the rated power according to the Power Derating Curve shown in the figure on the right. 100 −65 °C 70 °C 80 60 40 20 0 –80 170 °C –40 0 40 80 120 160 200 Ambient Temperature (°C) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2016 Current Sensing Resistors, Metal Plate Type Construction Insulator Resistive Element (Metal Plate) Surfase Treatment (Ni/Sn) Protective Resin Electrode (Metal) Dimensions in mm (not to scale), Recommended Land Pattern t W b A c L a Land Pattern Part No. (inch size) ERJMP2 (1206) ERJMP3 (2010) ERJMP4 (2512) Dimension (mm) Resistance Value (Ω) 1m 2m 3m to 5m 6m to 50m 1m 2m to 6m 7m to 50m 1m 2m to 4m 5m, 6m 7m to 50m L W A 1.04±0.25 Recommended Land Pattern (mm) t 0.90±0.25 3.20±0.25 1.60±0.25 0.64±0.25 0.50±0.25 5.00±0.25 2.50±0.25 1.47±0.25 0.50±0.25 2.20±0.25 6.40±0.25 3.20±0.25 0.64±0.25 0.90±0.25 0.64±0.25 a b c 1.5 1.8 1.0 1.1 1.8 1.8 2.1 3.1 1.9 1.3 3.1 3.5 3.0 3.4 2.0 2.0 3.4 4.0 Mass (Weight) (g/1000 pcs.) 30 70 0.90±0.25 1.20±0.25 0.64±0.25 0.76±0.25 100 Change of Resistance (%) Typical Temperature dependence of electrical resistance 1 0.5 0 –0.5 –1 –80 –60 –40 –20 0 20 40 60 80 100 120 140 160 180 Temperature (°C) Long-term stability ● Load ● Thermal Life 70 °C, Rated power ERJMP2KF5M0U Shock −55 °C/155 °C ERJMP4PF5M0U ERJMP2KF5M0U 1 0.5 0 –0.5 –1 0 1000 2000 3000 Test Time (hrs) ERJMP4PF5M0U ERJMP3MF5M0U Change of Resistance (%) Change of Resistance (%) ERJMP3MF5M0U 4000 1 0.5 0 –0.5 –1 0 1000 2000 3000 Test Time (hrs) 4000 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2016 Current Sensing Resistors, Metal Plate Type Maximum pulse energy respectively pulse power for continuous operation Referance Data Condition : Room Temperature, OFF : 10 s, 1000 cycle, Wave form : Square Change of Resistance=±1 % type 1000 100 100 10 10 1 ERJMP2 1m Ω ERJMP2 5m Ω ERJMP2 10m Ω 0.1 1 0.01 0.1 ERJMP2 33m Ω ERJMP2 50m Ω 0.01 0.001 0.001 0.0001 ● ERJMP3 Power (W) Pulse Energy (J) ● ERJMP2 0.001 0.01 Pulse width (s) 0.1 1 0.0001 10 type 1000 100 100 10 1 ERJMP3 5m Ω ERJMP3 10m Ω 0.1 1 ERJMP3 50m Ω 0.1 0.01 ERJMP3 33m Ω 0.01 0.001 0.001 0.0001 ● ERJMP4 Power (W) Pulse Energy (J) ERJMP3 1m Ω 10 0.001 0.01 Pulse width (s) 0.1 1 0.0001 10 type 1000 100 100 10 ERJMP4 5m Ω 1 ERJMP4 10m Ω 0.1 1 0.1 ERJMP4 33m Ω ERJMP4 50m Ω 0.01 0.01 0.001 0.0001 Power (W) Pulse Energy (J) ERJMP4 1m Ω 10 0.001 0.001 0.01 Pulse width (s) 0.1 1 0.0001 10 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2016 Current Sensing Resistors, Metal Plate Type Performance (AEC-Q200) Test Item Test Condition Thermal Shock −55 °C/155 °C, 1000cycles Overload 3 × Rated Power, 5 sec Solderability 245 °C, 3 sec Specification Typical value ±1 % 0.20 % ±0.5 % 0.10 % > 95% coverage > 95% coverage Resistance to Solvents MIL-STD-202 method 215, 2.1a, 2.1d Low Temperature Storage and Operation −65 °C, 24 h No damage No damage ±0.5 % 0.03 % Resistance to Soldering Heat MIL-STD-202 method 210 (260 °C, 10s) ±0.5 % 0.10 % Moisture Resistance MIL-STD-202 method 106 ±0.5 % 0.10 % Shock MIL-STD-202 method 213-A ±0.5 % 0.10 % Vibration, High Frequency 10 to 2000 (Hz) ±0.5 % 0.05 % Life 70 °C, Rated Power, 2000 h ±1 % 0.30 % Storage Life at Elevated Temperature 170 °C, 2000 h ±1 % 0.30 % High Temperature Characteristics 140 °C, 2000 h ±0.5 % 0.05 % Frequency Characteristics Inductance < 5 nH < 2 nH Sense terminal-Layout Land Sense terminal Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2016