ERJP08J150V

Anti-Surge Thick Film Chip Resistors Anti-Surge Thick Film Chip Resistors Type: ERJ PA2, P03, PA3, P06, P08, P14 Features ● ESD surge characteristics superior to standard metal film resistors reliability Metal glaze thick film resistive element and three layers of electrodes ● Suitable for both reflow and flow soldering ● High power … 0.20 W : 0402 inch / 1005 mm size (ERJPA2), 0603 inch / 1608 mm size (ERJP03) 0.25 W : 0603 inch / 1608 mm size (ERJPA3) 0.50 W : 0805 inch / 2012 mm size (ERJP06), 1210 inch / 3225 mm size (ERJP14) 0.66 W : 1206 inch / 3216 mm size (ERJP08) ● Reference Standards… IEC 60115-8, JIS C 5201-8, EIAJ RC-2134B ● AEC-Q200 qualified ● RoHS compliant ● High ■ As for Packaging Methods, Land Pattern, Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E R J P 0 6 D 1 0 0 2 V Size, Power Rating Product Code Thick Film Code Inch Power R. Chip Resistors PA2 0402 0.20 W P03 0603 0.20 W PA3 0603 0.25 W P06 0805 0.50 W P08 1206 0.66 W P14 1210 0.50 W Resistance Tolerance Resistance Value Code Tolerance D ± 0.5 % F ±1% J ±5% The first two or three digits are significant figures of resistance and the third or 4th one denotes number of zeros following. Three digit type (±5 %), four digit type (±1 %, ±0.5 %) Example: 222→2.2k Ω, 1002→10k Ω Construction Packaging Methods Packaging Punched Carrier Taping 2 mm pitch, 10,000 pcs. Code X Part No. ERJPA2 ERJP03 ERJPA3 ERJP06 ERJP08 V Punched Carrier Taping 4 mm pitch, 5,000 pcs. U Embossed Carrier Taping ERJP14 4 mm pitch, 5,000 pcs. Dimensions in mm (not to scale) L a Protective coating Electrode (Inner) W Alumina substrate t b Electrode (Between) Part No. ERJPA2 ERJP03 Electrode (Outer) W a b Mass (Weight) [g/1000 pcs.] t 1.00±0.05 0.50±0.05 0.20±0.15 0.25±0.05 0.35±0.05 1.60 1.60 ±0.15 ERJP06 2.00 ±0.20 ERJP08 3.20 –0.20 1.60 –0.15 0.40±0.20 0.50±0.20 0.60±0.10 10 ERJP14 3.20±0.20 2.50±0.20 0.35±0.20 0.50±0.20 0.60±0.10 16 +0.05 +0.15 –0.05 0.80 +0.15 –0.05 0.80 ±0.10 1.25 +0.15 –0.10 0.15 +0.15 –0.10 0.15 ±0.20 0.25 ±0.15 0.8 ±0.15 ERJPA3 Thick film resistive element Dimensions (mm) L 0.30 ±0.10 0.25 0.40 ±0.20 ±0.10 2 ±0.10 2 0.45 0.45 ±0.10 0.60 +0.05 4 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 11 Nov. 2017 Anti-Surge Thick Film Chip Resistors Ratings Part No. (inch size) Power (3) Rating at 70 °C (W) Limiting Element (1) Voltage (V) Maximum Overload (2) Voltage (V) ERJPA2 (0402) 0.20 50 100 ERJP03 (0603) 0.20 150 200 Resistance Tolerance (%) Resistance Range (Ω) T.C.R. –6 (×10 /°C) ±0.5, ±1 10 to 1M (E24, E96) ±100 10 to 1M (E24) ±200 ±0.5 10 to 1M (E24, E96) ±150 ±1 10 to 1M (E24, E96) ±5 ±5 ERJPA3 (0603) 0.25 150 200 ±0.5, ±1 ±5 ±0.5, ±1 ERJP06 (0805) 0.50 ERJP08 (1206) 0.66 500 1000 ERJP14 (1210) 0.50 200 400 400 1 to 1M (E24) 10 to 1M (E24, E96) 1 to 1.5M (E24) 10 to 1M (E24, E96) 600 ±5 ±0.5, ±1 ±5 ±0.5, ±1 ±5 1 to 3.3M (E24) 10 to 1M (E24, E96) 1 to 10M (E24) 10 to 1M (E24, E96) 1 to 1M (E24) Category AEC-Q200 Temperature Grade Range (°C) –55 to +155 Grade 0 ±200 –55 to +155 R < 10 Ω : –150 to +400 10 Ω ≤ R : ±200 ±100 –55 to +155 ±200 R < 33 Ω : ±300 33 Ω ≤ R : ±100 R < 10 Ω : –100 to +600 –55 to +155 10 Ω ≤ R < 33 Ω : ±300 33 Ω ≤ R : ±200 ±100 R < 10 Ω : –100 to +600 –55 to +155 10 Ω ≤ R : ±200 ±100 R < 10 Ω : –100 to +600 –55 to +155 10 Ω ≤ R : ±200 Grade 0 Grade 0 Grade 0 Grade 0 Grade 0 (1) Rated Continuous Working Voltage (RCWV) shall be determined from RCWV=√Power Rating × Resistance Values, or Limiting Element Voltage listed above, whichever less. (2) Overload Test Voltage (OTV) shall be determined from OTV=Specified Magnification (refer to performance) × RCWV or Maximum Overload Voltage listed above, whichever less. (3) Use it on the condition that the case temperature is below the upper category temperature. –55 °C 100 Rated Load (%) Power Derating Curve For resistors operated in ambient temperatures above 70 °C, power rating shall be derated in accordance with the figure on the right. ✽ When the temperature of ERJP14 is 155 °C or less, the derating start temperature can be changed to 125 °C. (See the dotted line) 70 °C 125 °C 80 ERJ P06, P08 60 40 20 0 –60 –40 –20 ERJ PA2, P03, PA3, P14 155 °C 0 20 40 60 80 100 120 140 160 180 Ambient Temperature (°C) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 11 Nov. 2017 Anti-Surge Thick Film Chip Resistors ESD Characteristic R=0 Ω(≤ 1.5k Ω)/150 Ω(> 1.5k Ω) E C=150p F Sample 0402 inch size : E=±1k V 0603, 0805, 1206, 1210 inch size : E=±3k V ERJPA2 (0402 inch /1005 mm size) -5% ERJ2G -10% -15% -20% -25% -30% 10 Ω 1k Ω 10k Ω 100k Ω 1M Ω ERJP06 (0805 inch / 2012 mm size) 5% Change Ratio of Resistance Value 100 Ω ERJP06 -5% -10% ERJ6G -15% -20% 10 Ω 100 Ω 1k Ω 10k Ω 100k Ω ERJPA3 0% ERJP03 -5% -10% -15% -20% -25% -30% ERJ3G 10 Ω 1M Ω 100 Ω 1k Ω 10k Ω 100k Ω 1M Ω ERJP08 (1206 inch / 3216 mm size) 5% 0% -25% -30% Change Ratio of Resistance Value 0% ERJP03, PA3 (0603 inch /1608 mm size) 5% ERJPA2 Change Ratio of Resistance Value Change Ratio of Resistance Value 5% ERJP08 0% -5% ERJ8G -10% -15% -20% -25% -30% 10 Ω 100 Ω 1k Ω 10k Ω 100k Ω 1M Ω ERJP14 (1210 inch / 3225 mm size) 5% Change Ratio of Resistance Value Anti-Surge Thick Film Chip Resistors(ERJP Type) Thick Film Chip Resistors(ERJ Type) ERJP14 0% -5% ERJ14 -10% -15% -20% -25% -30% 10 Ω 100 Ω 1k Ω 10k Ω 100k Ω 1M Ω Performance Test Item Resistance T. C. R. Overload Resistance to Soldering Heat Rapid Change of Temperature High Temperature Exposure Damp Heat, Steady State Load Life in Humidity Endurance at 70 °C Performance Requirements Within Specified Tolerance Test Conditions 20 °C Within Specified T. C. R. +25 °C/+155 °C (ERJPA2 : +125 °C) ERJP06 : Rated Voltag×1.77, 5 s ±2% ERJPA2, ERJPA3, ERJP08 : Rated Voltag×2.0, 5 s Only when it is ERJP03 (D), P14 (D) : ±0.5% ERJP03, ERJP14 : Rated Voltag×2.5, 5 s D : ±0.5%, F, J : ±1% 270 °C, 10 s ±1% –55 °C (30 min.) / +155 °C (30 min.) , 100 cycles ±1% +155 °C, 1000 h ±1% 60 °C, 90% to 95%RH, 1000 h 60 °C, 90% to 95%RH, ±3% Only when it is ERJP03 (D), P14 (D) : ±1% Rated Voltage, 1.5 h ON / 0.5 h OFF cycle, 1000 h 70 °C, Rated Voltage, ±3% Only when it is ERJP03 (D), P14 (D) : ±1% 1.5 h ON / 0.5 h OFF cycle, 1000 h Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 11 Nov. 2017