ERZ-VA7D511

“ZNR” Transient/Surge Absorbers (Type D) “ZNR” Transient/Surge Absorbers Type: Series: D V Features ● Large withstanding surge current capability in compact sizes “Energy Handling Capability” absorbing transient overvoltages in compact sizes ● Wide range of varistor voltages ● RoHS compliant ● Large Recommended Applications ● Transistor, diode, IC, thyristor or triac semiconductor protection protection in consumer electronic equipment ● Surge protection in communication, measuring or controller electronics ● Surge protection in electronic home appliances, gas or petroleum appliances ● Surge Applicable Standards ● UL1449 (VZCA2/UL, VZCA8/C-UL) IEC61051-1, -2, -2-2, IEC60950-1 Annex.Q ● CSA C22.2 No.1 ● CQC(GB/T10193, GB/T10194, GB4943.1, GB8898) Refer to page 5 to 8, and 27, for the details ● VDE ■ As for Handling Precautions and Minimum Quantity / Packing Unit Please see Related Information Explanation of Part Numbers (Bulk) 1 2 3 4 E R Z V 5 6 7 8 9 10 05 07 09 12 D Series Product Code 11 Design No. Element Size f10 mm f5 mm 10 f14 mm f7 mm 14 f20 mm f10 mm 20 Lead Configuration D Straight Lead V Crimped Lead✽ ✽ Excluding f20. ✽ Only the lead cut Norminal Varistor Voltage The first two digits are significant figures and the third one denotes the number of zeros following. Explanation of Part Numbers (Taping) 1 2 3 4 E R Z V Product Code A to D E to H 5 6 7 8 9 11 12 D Series Taping / Packaging Radial Taping (P0=12.7 mm) Radial Taping (P0=15.0 mm) 10 Design No. Element Size f5 mm 5 f7 mm 7 f10 mm 9 f10 mm A f14 mm E Lead Configuration D Straight Lead Crimped Lead V Nominal Varistor Voltage The first two digits are significant figures and the third one denotes the number of zeros following. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) Reference Guide to Standard Products Part No. Applicable Standards Varistor ✽ Voltage Type Name Approvals (V) Maximum Clamping Allowable Voltage Voltage at 8/20µs ACrms (V) DC (V) max.(V) Ip (A) Maximum Peak Current at 8/20µs(A) 1 time 2 times ERZV05D180 V180 ◇ 40 1 250 125 ERZV07D180 V7180 ◇ 36 2.5 500 250 ERZV09D180 V9180 ◇ 36 5 1000 500 ERZV10D180 V10180 ◇ ERZV14D180 V14180 ◇ ERZV20D180 V20180 ERZV05D220 V220 ERZV07D220 18 (16 to 20) 11 14 36 5 1000 500 36 10 2000 1000 ◇ 36 20 3000 2000 ◇ 48 1 250 125 V7220 ◇ 43 2.5 500 250 ERZV09D220 V9220 ◇ 43 5 1000 500 ERZV10D220 V10220 ◇ 43 5 1000 500 ERZV14D220 V14220 ◇ 43 10 2000 1000 ERZV20D220 V20220 ◇ 43 20 3000 2000 ERZV05D270 V270 ◇ 60 1 250 125 ERZV07D270 V7270 ◇ 53 2.5 500 250 ERZV09D270 V9270 ◇ 53 5 1000 500 ERZV10D270 V10270 ◇ 53 5 1000 500 ERZV14D270 V14270 ◇ 53 10 2000 1000 ERZV20D270 V20270 ◇ 53 20 3000 2000 ERZV05D330 V330 ◇ 73 1 250 125 ERZV07D330 V7330 ◇ 65 2.5 500 250 ERZV09D330 V9330 ◇ 65 5 1000 500 ERZV10D330 V10330 ◇ 65 5 1000 500 ERZV14D330 V14330 ◇ 65 10 2000 1000 ERZV20D330 V20330 ◇ 65 20 3000 2000 ERZV05D390 V390 ◇ 86 1 250 125 ERZV07D390 V7390 ◇ 77 2.5 500 250 ERZV09D390 V9390 ◇ 77 5 1000 500 ERZV10D390 V10390 ◇ 77 5 1000 500 ERZV14D390 V14390 ◇ 77 10 2000 1000 ERZV20D390 V20390 ◇ 77 20 3000 2000 ERZV05D470 V470 ◇ 104 1 250 125 ERZV07D470 V7470 ◇ 93 2.5 500 250 ERZV09D470 V9470 ◇ 93 5 1000 500 ERZV10D470 V10470 ◇ 93 5 1000 500 ERZV14D470 V14470 ◇ 93 10 2000 1000 ERZV20D470 V20470 ◇ 93 20 3000 2000 ERZV05D560 V560 ◇ 123 1 250 125 ERZV07D560 V7560 ◇ 110 2.5 500 250 ERZV09D560 V9560 ◇ 110 5 1000 500 ERZV10D560 V10560 ◇ 110 5 1000 500 ERZV14D560 V14560 ◇ 110 10 2000 1000 ERZV20D560 V20560 ◇ 110 20 3000 2000 ERZV05D680 V680 ◇ 150 1 250 125 ERZV07D680 V7680 ◇ 135 2.5 500 250 ERZV09D680 V9680 ◇ 135 5 1000 500 ERZV10D680 V10680 ◇ 135 5 1000 500 ERZV14D680 V14680 ◇ 135 10 2000 1000 ERZV20D680 V20680 ◇ 135 20 3000 2000 22 (20 to 24) 27 (24 to 30) 33 (30 to 36) 39 (35 to 43) 47 (42 to 52) 56 (50 to 62) 68 (61 to 75) 14 17 20 25 30 35 40 18 22 26 31 38 45 56 Recommended Applications For the low voltage circuit ✽ Measuring Current of Varistor Voltage 5 Series : 0.1 mA, Others: 1 mA ◯ : UL1449 (VZCA2/UL, VZCA8/C-UL), ☆ : VDE (IEC61051-1, -2, -2-2), ★ : VDE (IEC60950-1 Annex.Q), □ : CSA C22.2 No.1 ◇ : CQC (GB/T10193, GB/T10194), ◆ : CQC (GB4943.1, GB8898) ※ Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) Reference Guide to Standard Products Part No. Applicable Standards Type Name Approvals Varistor ✽ Voltage (V) Maximum Clamping Maximum Allowable Voltage Peak Current Voltage at 8/20µs at 8/20µs(A) ACrms (V) DC (V) max.(V) Ip (A) 1 time 2 times ERZV05D820 V820U ○☆◇ 145 5 800 600 ERZV07D820 V7820U ○☆◇ 135 10 1750 1250 ERZV09D820 V9820U ○☆◇ 135 25 3500 2500 ERZV10D820 V10820U ○☆◇ 135 25 3500 2500 ERZV14D820 V14820U ○☆◇ 135 50 6000 5000 ERZV20D820 V20820U ○☆◇ 135 100 10000 7000 ERZV05D101 V101U ○☆◇ 175 5 800 600 ERZV07D101 V7101U ○☆◇ 165 10 1750 1250 ERZV09D101 V9101U ○☆◇ 165 25 3500 2500 ERZV10D101 V10101U ○☆◇ 165 25 3500 2500 ERZV14D101 V14101U ○☆◇ 165 50 6000 5000 ERZV20D101 V20101U ○☆◇ 165 100 10000 ERZV05D121 V121U ○☆◇ 210 5 800 ERZV07D121 V7121U ○☆◇ 200 10 1750 1250 ERZV09D121 V9121U ○☆◇ 200 25 3500 2500 ERZV10D121 V10121U ○☆◇ 200 25 3500 2500 ERZV14D121 V14121U ○☆◇ 200 50 6000 5000 ERZV20D121 V20121U ○☆◇ 200 100 10000 7000 ERZV05D151 V151U ○☆◇ 260 5 800 600 ERZV07D151 V7151U ○☆◇ 250 10 1750 1250 ERZV09D151 250 25 3500 2500 250 25 3500 2500 82 (74 to 90) 100 (90 to 110) 120 (108 to 132) 50 60 75 65 85 100 7000 Telephone, Communication Line 600 (DC 48 V) V9151U ○☆◇ ERZV10D151 V10151U ○☆◇ ERZV14D151 V14151U ○☆◇ 250 50 6000 5000 ERZV20D151 V20151U ○☆◇ 250 100 10000 7000 150 (135 to 165) 95 125 ERZV05D201 V201U ○☆□◇ 355 5 800 600 ERZV07D201 V7201U ○☆□◇ 340 10 1750 1250 ERZV09D201 340 25 3500 2500 340 25 3500 2500 5000 V9201U ○☆□◇ ERZV10D201 V10201U ○☆□◇ ERZV14D201 V14201U ○☆★□◇◆ 340 50 6000 ERZV20D201 V20201U ○☆★□◇◆ 340 100 10000 V221U ○☆□◇ 380 5 800 ERZV07D221 V7221U ○☆□◇ 360 10 1750 1250 ERZV09D221 V9221U ○☆□◇ 360 25 3500 2500 ERZV10D221 V10221U ○☆□◇ 360 25 3500 2500 ERZV14D221 V14221U ○☆★□◇◆ 360 50 6000 5000 ERZV20D221 V20221U ○☆★□◇◆ 360 100 10000 7000 V241U ○☆□◇ 415 5 800 600 ERZV07D241 V7241U ○☆□◇ 395 10 1750 1250 ERZV09D241 V9241U ○☆□◇ 395 25 3500 2500 ERZV10D241 V10241U ○☆□◇ 395 25 3500 2500 ERZV14D241 V14241U ○☆★□◇◆ 395 50 6000 5000 ERZV20D241 V20241U ○☆★□◇◆ 395 100 10000 V271U ○☆□◇ 475 5 800 ERZV07D271 V7271U ○☆□◇ 455 10 1750 1250 ERZV09D271 V9271U ○☆□◇ 455 25 3500 2500 ERZV10D271 V10271U ○☆□◇ 455 25 3500 2500 ERZV14D271 V14271U ○☆★□◇◆ 455 50 6000 5000 ERZV20D271 V20271U ○☆★□◇◆ 455 100 10000 7000 ERZV05D221 ERZV05D241 ERZV05D271 200 (185 to 225) 220 (198 to 242) 240 (216 to 264) 270 (247 to 303) 130 140 150 175 170 180 200 225 Recommended Applications 7000 AC 100 V Line–Line 600 Applications 7000 AC 100 V to 120 V, Line–Line 600 Applications ✽ Measuring Current of Varistor Voltage 5 Series : 0.1 mA, Others: 1 mA ◯ : UL1449 (VZCA2/UL, VZCA8/C-UL), ☆ : VDE (IEC61051-1, -2, -2-2), ★ : VDE (IEC60950-1 Annex.Q), □ : CSA C22.2 No.1 ◇ : CQC (GB/T10193, GB/T10194), ◆ : CQC (GB4943.1, GB8898) ※ Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) Reference Guide to Standard Products Part No. Applicable Standards Type Name Approvals ERZV05D331 V331U ○☆□◇ ERZV07D331 V7331U ○☆□◇ ERZV09D331 V9331U ○☆□◇ ERZV10D331 V10331U ○☆□◇ ERZV14D331 V14331U ERZV20D331 V20331U Varistor ✽ Voltage (V) Maximum Clamping Maximum Allowable Voltage Peak Current Voltage at 8/20µs at 8/20µs(A) ACrms (V) DC (V) max.(V) Ip (A) 1 time 2 times 570 5 800 600 545 10 1750 1250 545 25 3500 2500 545 25 3500 2500 ○☆★□◇◆ 545 50 6000 4500 ○☆★□◇◆ 545 100 10000 6500 330 (297 to 363) 210 270 ERZV05D361 V361U ○☆□◇ 620 5 800 ERZV07D361 V7361U ○☆□◇ 595 10 1750 ERZV09D361 V9361U ○☆□◇ 595 25 3500 ERZV10D361 V10361U ○☆□◇ 595 25 3500 ERZV14D361 V14361U ○☆★□◇◆ 595 50 6000 ERZV20D361 V20361U ○☆★□◇◆ 595 100 10000 360 (324 to 396) 230 300 600 AC 100 V to 120 V, Line–Line 1250 Applications 2500 2500 Telephone Line Applications, 4500 (For DC 250 V Insulation Resistance Test) 6500 ERZV05D391 V391U ○☆□◇ 675 5 800 600 ERZV07D391 V7391U ○☆□◇ 650 10 1750 1250 ERZV09D391 650 25 3500 2500 650 25 3500 2500 V9391U ○☆□◇ ERZV10D391 V10391U ○☆□◇ ERZV14D391 V14391U ○☆★□◇◆ 650 50 6000 4500 ERZV20D391 V20391U ○☆★□◇◆ 650 100 10000 6500 390 (351 to 429) 250 320 ERZV05D431 V431U ○☆□◇ 745 5 800 600 ERZV07D431 V7431U ○☆□◇ 710 10 1750 1250 ERZV09D431 710 25 3500 2500 710 25 3500 2500 4500 V9431U ○☆□◇ ERZV10D431 V10431U ○☆□◇ ERZV14D431 V14431U ○☆★□◇◆ 710 50 6000 ERZV20D431 V20431U ○☆★□◇◆ 710 100 10000 430 (387 to 473) 275 350 Recommended Applications ERZV05D471 V471U ○☆□◇ 810 5 800 ERZV07D471 V7471U ○☆□◇ 775 10 1750 6500 AC 100 V to 220 V, Line–Line and 600 Line–Ground Applications 1250 ERZV09D471 V9471U ○☆□◇ 775 25 3500 2500 775 25 3500 2500 470 (423 to 517) 300 385 ERZV10D471 V10471U ○☆★□◇◆ ERZV14D471 V14471U ○☆★□◇◆ 775 50 6000 4500 ERZV20D471 V20471U ○☆★□◇◆ 775 100 10000 6500 ERZV07D511 V7511U ○☆□◇ 845 10 1750 1250 ERZV09D511 V9511U ○☆□◇ 845 25 3500 2500 ERZV10D511 V10511U ○☆★□◇◆ 845 25 3500 2500 ERZV14D511 V14511U ○☆★□◇◆ 845 50 6000 4500 ERZV20D511 V20511U ○☆★□◇◆ 845 100 10000 6500 ERZV10D561 V10561U ○☆★□◇◆ 930 25 3500 ERZV14D561 V14561U ○☆★□◇◆ 930 50 5000 ERZV20D561 V20561U ○☆★□◇◆ 7500 ERZV10D621 V10621U ○☆★□◇◆ ERZV14D621 V14621U ○☆★□◇◆ ERZV20D621 V20621U ○☆★□◇◆ ERZV10D681 V10681U ○☆★□◇◆ ERZV14D681 V14681U ○☆★□◇◆ ERZV20D681 V20681U ○☆★□◇◆ 510 (459 to 561) 560 (504 to 616) 620 (558 to 682) 680 (612 to 748) 320 350 385 420 410 450 505 560 930 100 1025 25 3500 2500 4500 AC 100 to 240 V, Line–Line and 6500 Line–Ground Applications 2500 1025 50 5000 4500 1025 100 7500 6500 1120 25 3500 2500 1120 50 5000 4500 1120 100 7500 6500 ✽ Measuring Current of Varistor Voltage 5 Series : 0.1 mA, Others: 1 mA ◯ : UL1449 (VZCA2/UL, VZCA8/C-UL), ☆ : VDE (IEC61051-1, -2, -2-2), ★ : VDE (IEC60950-1 Annex.Q), □ : CSA C22.2 No.1 ◇ : CQC (GB/T10193, GB/T10194), ◆ : CQC (GB4943.1, GB8898) ※ Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) Reference Guide to Standard Products Part No. ERZV10D751 Applicable Standards Type Name Approvals V10751U ○☆★□◇◆ ERZV14D751 V14751U ○☆★□◇◆ ERZV20D751 V20751U ○☆★□◇◆ ERZV10D821 V10821U ○☆★□◇◆ ERZV14D821 V14821U ○☆★□◇◆ ERZV20D821 V20821U ○☆★□◇◆ ERZV10D911 V10911U ○☆★□◇◆ ERZV14D911 V14911U ○☆★□◇◆ ERZV20D911 V20911U ○☆★□◇◆ ERZV10D102 V10102U ○☆★□◇◆ ERZV14D102 V14102U ○☆★□◇◆ ERZV20D102 V20102U ○☆★□◇◆ ERZV10D112 V10112U ○☆★□◇◆ ERZV14D112 V14112U ○☆★□◇◆ ERZV20D112 V20112U ○☆★□◇◆ ERZV10D182CS V10182U ○☆★□◇◆ ERZV14D182CS V14182U ○☆★□◇◆ ERZV20D182 ○☆★□◇◆ V20182U Varistor ✽ Voltage (V) Maximum Clamping Maximum Allowable Voltage Peak Current Voltage at 8/20µs at 8/20µs(A) ACrms (V) DC (V) max.(V) Ip (A) 1 time 2 times 1240 750 (675 to 825) 460 820 (738 to 902) 510 910 (819 to 1001) 550 1000 (900 to 1100) 625 1100 (990 to 1210) 680 1800 1000 (1700 to 1980) 615 670 745 825 895 1465 25 3500 Recommended Applications 2500 1240 50 5000 4500 1240 100 7500 6500 1355 25 3500 2500 1355 50 5000 4500 1355 100 7500 6500 1500 25 3500 2500 1500 50 5000 4500 1500 100 7500 6500 1650 25 3500 2500 1650 50 5000 4500 1650 100 7500 6500 1815 25 3500 2500 1815 50 5000 4500 1815 100 7500 6500 2970 25 3500 2500 2970 50 5000 4500 2970 100 7500 6500 AC 380 V, Line–Line and Line–Ground Applications (For DC 500 V Insulating Test) AC 415 V, Line–Line and Line–Ground Applications (For DC 500 V Insulating Test) AC 480 V, Line–Line and Line–Ground Applications (For DC 500 V Insulating Test) Line–Ground Applications (For AC 1200 V Withstanding Test) ✽ Measuring Current of Varistor Voltage 5 Series : 0.1 mA, Others: 1 mA ◯ : UL1449 (VZCA2/UL, VZCA8/C-UL), ☆ : VDE (IEC61051-1, -2, -2-2), ★ : VDE (IEC60950-1 Annex.Q), □ : CSA C22.2 No.1 ◇ : CQC (GB/T10193, GB/T10194), ◆ : CQC (GB4943.1, GB8898) ※ Approval number (File No.) of safety regulations are subject to revision without notice. Ask factory for a copy of the latest file No. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) 5 Series Ratings and Characteristics Operating Temperature Range : –40 to 85 °C Part No. Storage Temperature Range : –40 to 125 °C Clamping Voltage (max.) ✽✽ Ip Rated Power Maximum Peak Current Capacitance (8/20 µs) (max.) (10/1000 µs) (2 ms) 1 time 2 times Maximum Energy V0.1 mA (V) ACrms (V) DC (V) (V) (W) (J) (J) (A) (A) at 1 kHz (pF) 18(16 to 20) 22(20 to 24) 27(24 to 30) 33(30 to 36) 39(35 to 43) 47(42 to 52) 56(50 to 62) 68(61 to 75) 82(74 to 90) 100(90 to 110) 120(108 to 132) 150(135 to 165) 200(185 to 225) 220(198 to 242) 240(216 to 264) 270(247 to 303) 330(297 to 363) 360(324 to 396) 390(351 to 429) 430(387 to 473) 470(423 to 517) 11 14 17 20 25 30 35 40 50 60 75 95 130 140 150 175 210 230 250 275 300 14 18 22 26 31 38 45 56 65 85 100 125 170 180 200 225 270 300 320 350 385 40 48 60 73 86 104 123 150 145 175 210 260 355 380 415 475 570 620 675 745 810 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.6 0.7 0.9 1.1 1.2 1.5 1.8 2.2 3.5 4.0 5.0 6.5 8.5 9.0 10.5 11.0 13.0 16.0 17.0 20.0 21.0 0.4 0.5 0.7 0.8 0.9 1.1 1.3 1.6 2.5 3.0 3.5 4.5 6.0 6.5 7.5 8.0 9.5 11.0 12.0 13.5 15.0 250 250 250 250 250 250 250 250 800 800 800 800 800 800 800 800 800 800 800 800 800 125 125 125 125 125 125 125 125 600 600 600 600 600 600 600 600 600 600 600 600 600 1600 1500 1450 1400 700 650 600 580 460 400 350 300 120 110 100 90 ✽ 80 ✽ 80 ✽ 80 ✽ 70 ✽ 60 ✽ ✽✽Ip Measuring current of clamping voltage 180 to 680 : 1 A, 820 to 471 : 5 A Dimensions in mm (not to scale) ✽ Refer to page 24 to 26 about leads cut type and taping. Part No. D max. T max. W±1.0 H max. L±1.0 ERZV05D180 ERZV05D220 ERZV05D270 ERZV05D330 ERZV05D390 ERZV05D470 ERZV05D560 ERZV05D680 ERZV05D820 ERZV05D101 ERZV05D121 ERZV05D151 ERZV05D201 ERZV05D221 ERZV05D241 ERZV05D271 ERZV05D331 ERZV05D361 ERZV05D391 ERZV05D431 ERZV05D471 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 7.0 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.1 4.3 4.5 4.8 4.4 4.5 4.6 4.8 5.1 5.3 5.4 5.6 5.8 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.4 1.6 1.8 2.1 1.7 1.8 1.9 2.1 2.4 2.5 2.7 2.9 3.1 D T L W f0.6 L ✽ Measured at 1 MHz H ERZV05D180 ERZV05D220 ERZV05D270 ERZV05D330 ERZV05D390 ERZV05D470 ERZV05D560 ERZV05D680 ERZV05D820 ERZV05D101 ERZV05D121 ERZV05D151 ERZV05D201 ERZV05D221 ERZV05D241 ERZV05D271 ERZV05D331 ERZV05D361 ERZV05D391 ERZV05D431 ERZV05D471 Maximum Allowable Voltage Varistor Voltage ● 20.0 min. ● W Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV05D180 to ERZV05D680 ERZV05D180 to ERZV05D680 1000 Max. Clamping Voltage Max. 400 Leakage Current 300 470 390 330 200 80 1 10 9 8 7 6 10 2 Ti m es Impulse Current (A) e m Ti 20 10 3 10 4 Ti m Ti es 10 5 me 10 6 Tim s Tim es es m 3 0 27 0 22 10 Ti 30 10 30 es m Ti 40 2 0 68 0 56 0 47 1 100 90 80 70 60 50 100 270 220 180 390 Voltage (V) 2 times : 5 min. interval up to 10 times : 2 min. interval up to 106 times : 10 sec. interval 680 560 es 1 Test current waveform 10–6 to 10–4 A: Direct current 10–1 to 103 A: 8/20 µs 5 4 3 10–6 10–5 10–4 10–3 10–2 10–1 100 Current (A) 101 102 103 104 ERZV05D820 to ERZV05D471 0.1 20 105 100 1000 Impulse Width (µs) 10000 ERZV05D820 to ERZV05D471 1000 2000 2 times : 5 min. interval up to 10 times : 2 min. interval up to 106 times : 10 sec. interval 100 100 90 80 70 60 50 40 30 10-6 Surge Current (A) Voltage (V) 200 820 es 101 271 241 e 121 300 Tim 151 1 47 3 Ti 10 4 me s Tim 10 5 es Tim 10 es 2 400 m Ti es s Tim ime 2 T 10 10 500 1 471 431 391 361 331 271 241 221 201 431 391 361 10 1000 900 800 700 600 Max. Clamping Voltage Max. Leakage Current 10 6 1 20 1 15 1 12 Tim es 1 1 10 0 82 Test Current Waveform 10-6 to 10-4 A: Direct Current 10-1 to 103 A: 8/20 µs 331 221 10-5 10-4 10-3 10-2 10-1 100 Current (A) 101 102 103 104 105 0.1 20 100 1000 Impulse Width (µs) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 10000 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) 7 Series Ratings and Characteristics Operating Temperature Range : –40 to 85 °C V1 mA (V) ACrms (V) 18(16 to 20) 11 22(20 to 24) 14 27(24 to 30) 17 33(30 to 36) 20 39(35 to 43) 25 47(42 to 52) 30 56(50 to 62) 35 68(61 to 75) 40 82(74 to 90) 50 100(90 to 110) 60 120(108 to 132) 75 150(135 to 165) 95 200(185 to 225) 130 220(198 to 242) 140 240(216 to 264) 150 270(247 to 303) 175 330(297 to 363) 210 360(324 to 396) 230 390(351 to 429) 250 430(387 to 473) 275 470(423 to 517) 300 510(459 to 561) 320 Clamping Voltage (max.) ✽✽ Ip Rated Power (V) 36 43 53 65 77 93 110 135 135 165 200 250 340 360 395 455 545 595 650 710 775 845 (W) 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 DC (V) 14 18 22 26 31 38 45 56 65 85 100 125 170 180 200 225 270 300 320 350 385 410 Maximum Peak Current Capacitance (8/20 µs) (max.) (10/1000 µs) (2 ms) 1 time 2 times (J) (J) (A) (A) at 1 kHz (pF) 1.1 0.9 500 250 3800 1.3 1.1 500 250 3600 1.6 1.3 500 250 3400 2.0 1.6 500 250 2900 2.4 1.9 500 250 1600 2.8 2.3 500 250 1550 3.4 2.7 500 250 1500 4.1 3.3 500 250 1200 7 5 1750 1250 810 8.5 6 1750 1250 700 10 7 1750 1250 590 13 9 1750 1250 500 17.5 12.5 1750 1250 200 19 13.5 1750 1250 190 21 15 1750 1250 170 24 17 1750 1250 150 28 20 1750 1250 130 32 23 1750 1250 130 35 25 1750 1250 130 40 27.5 1750 1250 120 42 30 1750 1250 100 45 32 1750 1250 90 ✽ Maximum Energy ✽✽Ip Measuring current of clamping voltage 180 to 680 : 25 A, 820 to 511 : 10 A Dimensions in mm (not to scale) ✽ Refer to page 24 to 26 about leads cut type and taping. Part No. D max. T max. W±1.0 H max. L±1.0 ERZV07D180 ERZV07D220 ERZV07D270 ERZV07D330 ERZV07D390 ERZV07D470 ERZV07D560 ERZV07D680 ERZV07D820 ERZV07D101 ERZV07D121 ERZV07D151 ERZV07D201 ERZV07D221 ERZV07D241 ERZV07D271 ERZV07D331 ERZV07D361 ERZV07D391 ERZV07D431 ERZV07D471 ERZV07D511 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 8.5 4.5 4.6 4.7 4.9 4.8 4.9 5.0 5.2 4.1 4.3 4.5 4.8 4.4 4.5 4.6 4.8 5.1 5.3 5.4 5.6 5.8 6.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 1.3 1.4 1.5 1.7 1.6 1.7 1.8 2.0 1.4 1.6 1.8 2.1 1.7 1.8 1.9 2.1 2.4 2.5 2.7 2.9 3.1 3.3 D T L W f 0.6 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 L ✽ Measured at 1 MHz Storage Temperature Range : –40 to 125 °C H Part No. ERZV07D180 ERZV07D220 ERZV07D270 ERZV07D330 ERZV07D390 ERZV07D470 ERZV07D560 ERZV07D680 ERZV07D820 ERZV07D101 ERZV07D121 ERZV07D151 ERZV07D201 ERZV07D221 ERZV07D241 ERZV07D271 ERZV07D331 ERZV07D361 ERZV07D391 ERZV07D431 ERZV07D471 ERZV07D511 Maximum Allowable Voltage Varistor Voltage ● 20.0 min. ● W Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV07D180 to ERZV07D680 ERZV07D180 to ERZV07D680 1000 Max. Clamping Voltage Max. Leakage Current 400 100 e s m e Ti im 1 es T m Ti 10 2 10 10 3 10 4 Tim Tim es e 10 5 s T 10 10 6 ime Tim s es Impulse Current (A) 30 0 56 0 47 0 39 330 20 270 40 es 0 68 2 m Ti Voltage (V) 200 100 90 80 70 60 50 2 times : 5 min. interval up to 10 times : 2 min. interval up to 106 times : 10 sec. interval 680 560 470 390 330 270 220 180 300 0 22 0 8 1 10 9 8 7 6 5 1 Test current waveform 10–6 to 10–3 A: Direct current 10–1 to 103 A: 8/20 µs 4 0.1 3 10–6 10–5 10–4 10–3 10–2 10–1 100 101 102 103 104 105 20 100 Current (A) 1000 10000 Impulse Width (µs) ERZV07D820 to ERZV07D511 ERZV07D820 to ERZV07D511 10000 471 431 391 361 151 511 121 30 10-6 5 Ti es 40 201 151 121 10 m 10 101 e 100 90 80 70 60 50 271 241 Tim 200 100 10 820 Tim 101 300 1 Voltage (V) 400 es es es es m m i i im Tim 02 T 03 T 4 T 1 1 10 500 1000 2 1000 900 800 700 600 2 times : 5 min. interval up to 10 times : 2 min. interval up to 106 times : 10 sec. interval 511 471 431 391 361 331 271 241 221 201 Surge Current (A) 2000 Max. Clamping Voltage Max. Leakage Current es 10 6 Ti m es 820 Test Current Waveform 10-6 to 10-3 A: Direct Current 10-1 to 104 A: 8/20 µs 331 221 10-5 10-4 10-3 10-2 10-1 100 Current (A) 101 102 103 104 105 1 20 100 1000 Impulse Width (µs) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 10000 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) 9 Series Ratings and Characteristics ● Operating Temperature Range : –40 to 85 °C Part No. ERZV09D180 ERZV09D220 ERZV09D270 ERZV09D330 ERZV09D390 ERZV09D470 ERZV09D560 ERZV09D680 ERZV09D820 ERZV09D101 ERZV09D121 ERZV09D151 ERZV09D201 ERZV09D221 ERZV09D241 ERZV09D271 ERZV09D331 ERZV09D361 ERZV09D391 ERZV09D431 ERZV09D471 ERZV09D511 Maximum Allowable Voltage Varistor Voltage V1 mA (V) ACrms (V) 18(16 to 20) 11 22(20 to 24) 14 27(24 to 30) 17 33(30 to 36) 20 39(35 to 43) 25 47(42 to 52) 30 56(50 to 62) 35 68(61 to 75) 40 82(74 to 90) 50 100(90 to 110) 60 120(108 to 132) 75 150(135 to 165) 95 200(185 to 225) 130 220(198 to 242) 140 240(216 to 264) 150 270(247 to 303) 175 330(297 to 363) 210 360(324 to 396) 230 390(351 to 429) 250 430(387 to 473) 275 470(423 to 517) 300 510(459 to 561) 320 ● Storage Temperature Range : –40 to 125 °C Clamping Voltage (max.) ✽ Ip Rated Power (V) 36 43 53 65 77 93 110 135 135 165 200 250 340 360 395 455 545 595 650 710 775 845 (W) 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 DC (V) 14 18 22 26 31 38 45 56 65 85 100 125 170 180 200 225 270 300 320 350 385 410 Maximum Peak Current Capacitance (8/20 µs) (max.) (10/1000 µs) (2 ms) 1 time 2 times (J) (J) (A) (A) at 1 kHz (pF) 2.6 2.2 1000 500 16000 3.2 2.6 1000 500 11000 3.9 3.2 1000 500 8000 4.8 4.0 1000 500 6300 5.6 4.7 1000 500 5200 6.8 5.6 1000 500 4600 8.1 6.7 1000 500 3750 9.8 8.2 1000 500 2800 14 10 3500 2500 2000 17 12 3500 2500 1700 20 14.5 3500 2500 1400 25 18 3500 2500 1100 35 25 3500 2500 430 39 27.5 3500 2500 410 42 30 3500 2500 380 49 35 3500 2500 350 58 42 3500 2500 300 65 45 3500 2500 300 70 50 3500 2500 300 80 55 3500 2500 270 85 60 3500 2500 230 92 67 3500 2500 210 Maximum Energy ✽Ip Measuring current of clamping voltage 180 to 680 : 5 A, 820 to 511 : 25 A ✽ Refer to page 24 to 26 about leads cut type and taping. T max. W±1.0 H max. L±1.0 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 3.8 4.0 4.2 4.5 4.0 4.2 4.4 4.5 3.8 3.9 4.1 4.4 4.1 4.2 4.3 4.5 4.8 5.0 5.1 5.3 5.6 5.8 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 14.0 1.3 1.4 1.5 1.7 1.7 1.8 1.9 2.2 1.6 1.8 2.0 2.2 1.7 1.8 1.9 2.0 2.3 2.5 2.6 2.8 3.1 3.2 D T L W f 0.6 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 L D max. H Part No. ERZV09D180 ERZV09D220 ERZV09D270 ERZV09D330 ERZV09D390 ERZV09D470 ERZV09D560 ERZV09D680 ERZV09D820 ERZV09D101 ERZV09D121 ERZV09D151 ERZV09D201 ERZV09D221 ERZV09D241 ERZV09D271 ERZV09D331 ERZV09D361 ERZV09D391 ERZV09D431 ERZV09D471 ERZV09D511 20.0 min. Dimensions in mm (not to scale) W Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV09D180 to ERZV09D680 ERZV09D180 to ERZV09D680 Max. Clamping Voltage Max. Leakage Current 400 1000 680 560 470 390 330 270 300 200 2 times : 5 min. interval up to 10 times : 2 min. interval up to 106 times : 10 sec. interval 1 Impulse Current (A) Voltage (V) Ti m es 10 9 8 7 6 es 0 33 0 27 0 2 2 0 8 1 m 20 10 2 m Ti 0 56 470 0 39 30 10 10 40 Ti 10 me 4 s 10 5 Tim e Tim s es 10 6 Tim e Ti 6 2 80 e m 100 1 03 180 100 90 80 70 60 50 Ti 220 es s 1 Test current waveform 10–6 to 10–3 A: Direct current 10–1 to 103 A: 8/20 μs 5 4 3 10–6 10–5 10–4 10–3 10–2 10–1 100 Current (A) 101 102 103 104 0.1 105 20 100 1000 10000 Impulse Width (µs) ERZV09D820 to ERZV09D511 ERZV09D820 to ERZV09D511 10000 471 431 391 361 100 90 80 70 60 50 10 6 10 101 820 Tim es Test Current Waveform 10-6 to 10-3 A: Direct Current 10-1 to 104 A: 8/20 µs 331 221 10-5 es 201 5 1 1 121 Ti m 10 5 es Tim es e 271 241 200 100 im 820 4 im 2T 300 10 1T 121 101 10 Voltage (V) es es Tim Tim es im 3 T 2 10 511 400 30 10-6 1000 151 500 40 2 times : 5 min. interval up to 10 times : 2 min. interval up to 106 times : 10 sec. interval 511 471 431 391 361 331 271 241 221 201 10 1000 900 800 700 600 Max. Leakage Current Surge Current (A) 2000 Max. Clamping Voltage 10-4 10-3 10-2 10-1 100 Current (A) 101 102 103 104 105 1 20 100 1000 Impulse Width (µs) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 10000 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) 10 Series Ratings and Characteristics ● Operating Temperature Range : –40 to 85 °C Varistor Voltage Part No. V1 mA (V) Maximum Allowable Voltage ACrms (V) DC (V) ERZV10D180 18(16 to 20) 11 ERZV10D220 22(20 to 24) ERZV10D270 27(24 to 30) ERZV10D330 ERZV10D390 ERZV10D470 47(42 to 52) 30 ERZV10D560 56(50 to 62) 35 ERZV10D680 68(61 to 75) 40 56 ● Storage Temperature Range : –40 to 125 °C Clamping Voltage (max.) ✽✽ Ip Rated Power (V) (W) Maximum Peak Current Capacitance (8/20 µs) (max.) (10/1000 µs) (2 ms) 1 time 2 times Maximum Energy (J) (J) (A) (A) at 1 kHz (pF) 2.2 1000 500 16000 14 36 0.05 2.6 14 18 43 0.05 3.2 2.6 1000 500 11000 17 22 53 0.05 3.9 3.2 1000 500 8000 33(30 to 36) 20 26 65 0.05 4.8 4.0 1000 500 6300 39(35 to 43) 25 31 77 0.05 5.6 4.7 1000 500 5200 38 93 0.05 6.8 5.6 1000 500 4600 45 110 0.05 8.1 6.7 1000 500 3750 135 0.05 9.8 8.2 1000 500 2800 ERZV10D820 82(74 to 90) 50 65 135 0.4 14 10 3500 2500 2000 ERZV10D101 100(90 to 110) 60 85 165 0.4 17 12 3500 2500 1700 ERZV10D121 120(108 to 132) 75 100 200 0.4 20 14.5 3500 2500 1400 ERZV10D151 150(135 to 165) 95 125 250 0.4 25 18 3500 2500 1100 ERZV10D201 200(185 to 225) 130 170 340 0.4 35 25 3500 2500 430 ERZV10D221 220(198 to 242) 140 180 360 0.4 39 27.5 3500 2500 410 ERZV10D241 240(216 to 264) 150 200 395 0.4 42 30 3500 2500 380 ERZV10D271 270(247 to 303) 175 225 455 0.4 49 35 3500 2500 350 ERZV10D331 330(297 to 363) 210 270 545 0.4 58 42 3500 2500 300 ERZV10D361 360(324 to 396) 230 300 595 0.4 65 45 3500 2500 300 ERZV10D391 390(351 to 429) 250 320 650 0.4 70 50 3500 2500 300 ERZV10D431 430(387 to 473) 275 350 710 0.4 80 55 3500 2500 270 ERZV10D471 470(423 to 517) 300 385 775 0.4 85 60 3500 2500 230 ERZV10D511 510(459 to 561) 320 410 845 0.4 92 67 3500 2500 210 ERZV10D561 560(504 to 616) 350 450 930 0.4 92 67 3500 2500 200 ERZV10D621 620(558 to 682) 385 505 1025 0.4 92 67 3500 2500 190 ERZV10D681 680(612 to 748) 420 560 1120 0.4 92 67 3500 2500 170 ERZV10D751 750(675 to 825) 460 615 1240 0.4 100 70 3500 2500 160 ERZV10D821 820(738 to 902) 510 670 1355 0.4 110 80 3500 2500 140 ERZV10D911 910(819 to 1001) 550 745 1500 0.4 130 90 3500 2500 120 ERZV10D102 1000(900 to 1100) 625 825 1650 0.4 140 100 3500 2500 110 110 ERZV10D112 1100(990 to 1210) 680 895 1815 0.4 155 110 3500 2500 ERZV10D182CS 1800(1700 to 1980) 1000 1465 2970 0.4 247 183 3500 2500 ✽ Measured at 1 MHz 70 ✽ ✽✽Ip Measuring current of clamping voltage 180 to 680 : 5 A, 820 to 182 : 25 A Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) ✽ Refer to page 24 to 26 about leads cut type and taping. L±1.0 D T L L 1.3 1.4 1.5 1.7 1.6 1.7 1.8 2.0 W 1.6 1.8 f 0.8 2.0 2.3 1.9 2.0 2.1 2.3 (ERZV10D182CS) 2.6 2.8 D 2.9 3.1 3.3 3.5 3.8 4.2 4.5 f 0.8 4.9 5.2 5.7 6.2 6.8 10.0(±1.5) W T L 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 14.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 16.5 2 H max. 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 11.0✽ W W±1.0 4.6 4.7 4.8 5.0 4.9 5.0 5.1 5.3 4.5 4.7 4.9 5.2 4.8 4.9 5.0 5.2 5.5 5.7 5.8 6.0 6.2 6.4 6.7 7.1 7.4 7.8 8.1 8.6 9.1 9.7 14.4 H T max. 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 11.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 12.5 13.5 20.0 min. D max. H Part No. ERZV10D180 ERZV10D220 ERZV10D270 ERZV10D330 ERZV10D390 ERZV10D470 ERZV10D560 ERZV10D680 ERZV10D820 ERZV10D101 ERZV10D121 ERZV10D151 ERZV10D201 ERZV10D221 ERZV10D241 ERZV10D271 ERZV10D331 ERZV10D361 ERZV10D391 ERZV10D431 ERZV10D471 ERZV10D511 ERZV10D561 ERZV10D621 ERZV10D681 ERZV10D751 ERZV10D821 ERZV10D911 ERZV10D102 ERZV10D112 ERZV10D182CS 4.0 ±1.5 Dimensions in mm (not to scale) L ✽: W2 Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV10D180 to ERZV10D680 ERZV10D180 to ERZV10D680 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec. interval 680 560 470 390 330 270 300 200 1 100 Impulse Current (A) 400 1000 Max. Clamping Voltage Max. Leakage Current 220 180 Voltage (V) 100 90 80 70 60 50 0 68 0 56 0 47 0 39 40 30 10 9 8 7 6 T 10 4 ime 10 5 Ti m Ti e m e 10 6 10 0.1 20 Tim Tim e Tim 1 e 10 2 0 Ti Tim me e e 100 1000 Impulse Width (µs) 10000 Test current waveform 10–6 to 10–3 A: Direct current 10–1 to 103 A: 8/20 µs 5 4 3 2 1 0 33 0 27 0 22 0 18 20 10 3 10–6 10–5 10–4 10–3 10–2 10–1 100 101 102 103 104 105 Current (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV10D820 to ERZV10D511 ERZV10D820 to ERZV10D511 10000 Voltage (V) 30 10-6 10 6 Surge Current (A) 10 es 271 241 1 20 10000 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec. interval Test Current Waveform 10-6 to 10-3 A: Direct Current 10-1 to 104 A: 8/20 µs 331 221 -5 10 10 -4 -3 10 10 -2 -1 0 10 2 10 3 10 4 10 1000 5 10 10 10 2 Tim e 10 3 Tim s Tim es e 10 4 s T 100 10 5 imes Time s 10 6 10 Max. Clamping Voltage Max. Leakage Current e m Ti s 1 ime T 2 10 10 Current (A) 1 Tim es 182CS 102 911 821 1 20 112 102 911 821 751 681 621 561 2000 S 2C Voltage (V) 10000 ERZV10D561 to ERZV10D112 101 820 18 1000 100 Impulse Width (µs) 201 151 121 5000 3000 Tim 820 ERZV10D561 to ERZV10D182CS 4000 e m 40 Ti 100 90 80 70 60 50 es m 121 101 511 10 10 Tim 2 10 3 Tim es 10 4 Tim es T es 100 10 5 ime Tim s es Ti 151 300 200 1000 2 471 431 391 361 500 400 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec. interval 511 471 431 391 361 331 271 241 221 201 1 1000 900 800 700 600 Max. Clamping Voltage Max. Leakage Current Surge Current (A) 2000 100 1000 10000 Impulse Width (µs) ERZV10D182CS 10000 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec. interval 1000 900 800 1000 2 11 2 Surge Current (A) 100 10 4 1 56 200 10-6 751 681 621 10-5 Tim 10 2 Tim es Ti es m es 10 5 Tim es 10 6 Tim es es 10 300 Tim es 10 e 400 10 3 m 500 m Ti 600 Ti 1 700 Test Current Waveform 10-6 to 10-3 A: Direct Current 10-1 to 104 A: 8/20 µs 10-4 10-3 10-2 10-1 100 Current (A) 101 102 103 104 105 1 20 100 1000 10000 Impulse Width (µs) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) 14 Series Ratings and Characteristics ● Operating Temperature Range : –40 to 85 °C Maximum Allowable Voltage Part No. Varistor Voltage ERZV14D180 18(16 to 20) 11 V1 mA (V) ACrms (V) DC (V) ● Storage Temperature Range : –40 to 125 °C Clamping Voltage (max.) ✽ Ip Rated Power (V) (W) Maximum Peak Current Capacitance (8/20 µs) (max.) (10/1000 µs) (2 ms) 1 time 2 times Maximum Energy (J) 14 36 0.1 5.2 (J) (A) (A) at 1 kHz (pF) 4.3 2000 1000 25000 ERZV14D220 22(20 to 24) 14 18 43 0.1 6.3 5.3 2000 1000 20000 ERZV14D270 27(24 to 30) 17 22 53 0.1 7.8 6.5 2000 1000 16000 ERZV14D330 33(30 to 36) 20 26 65 0.1 9.5 7.9 2000 1000 12200 9.4 2000 1000 7000 ERZV14D390 39(35 to 43) 25 31 77 0.1 11 ERZV14D470 47(42 to 52) 30 38 93 0.1 14 ERZV14D560 56(50 to 62) 35 45 110 0.1 16 ERZV14D680 68(61 to 75) 40 56 135 0.1 20 11 2000 1000 6750 13 2000 1000 6500 16 2000 1000 5500 ERZV14D820 82(74 to 90) 50 65 135 0.6 28 20 6000 5000 3700 ERZV14D101 100(90 to 110) 60 85 165 0.6 35 25 6000 5000 3200 ERZV14D121 120(108 to 132) 75 100 200 0.6 42 30 6000 5000 2700 ERZV14D151 150(135 to 165) 95 125 250 0.6 53 37.5 6000 5000 2200 ERZV14D201 200(185 to 225) 130 170 340 0.6 70 50 6000 5000 770 ERZV14D221 220(198 to 242) 140 180 360 0.6 78 55 6000 5000 740 ERZV14D241 240(216 to 264) 150 200 395 0.6 84 60 6000 5000 700 ERZV14D271 270(247 to 303) 175 225 455 0.6 99 70 6000 5000 640 ERZV14D331 330(297 to 363) 210 270 545 0.6 115 80 6000 4500 580 ERZV14D361 360(324 to 396) 230 300 595 0.6 130 90 6000 4500 540 ERZV14D391 390(351 to 429) 250 320 650 0.6 140 100 6000 4500 500 ERZV14D431 430(387 to 473) 275 350 710 0.6 155 110 6000 4500 450 ERZV14D471 470(423 to 517) 300 385 775 0.6 175 125 6000 4500 400 ERZV14D511 510(459 to 561) 320 410 845 0.6 190 136 6000 4500 350 ERZV14D561 560(504 to 616) 350 450 930 0.6 190 136 5000 4500 340 ERZV14D621 620(558 to 682) 385 505 1025 0.6 190 136 5000 4500 330 ERZV14D681 680(612 to 748) 420 560 1120 0.6 190 136 5000 4500 320 ERZV14D751 750(675 to 825) 460 615 1240 0.6 210 150 5000 4500 310 ERZV14D821 820(738 to 902) 510 670 1355 0.6 235 165 5000 4500 280 ERZV14D911 910(819 to 1001) 550 745 1500 0.6 255 180 5000 4500 250 ERZV14D102 1000(900 to 1100) 625 825 1650 0.6 280 200 5000 4500 230 ERZV14D112 1100(990 to 1210) 680 895 1815 0.6 310 220 5000 4500 210 ERZV14D182CS 1800(1700 to 1980) 1000 1465 2970 0.6 510 360 5000 4500 120 ✽Ip Measuring current of clamping voltage 180 to 680 : 10 A, 820 to 182 : 50 A Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) ✽ Refer to page 24 to 26 about leads cut type and taping. L±1.0 1.3 D 1.4 1.5 1.7 1.6 1.7 1.8 2.0 1.6 W 1.8 2.0 f 0.8 2.3 1.9 2.0 2.1 2.3 2.6 2.8 (ERZV14D182CS) 2.9 D 3.1 3.3 3.5 3.8 4.2 4.5 f 0.8 4.9 5.2 5.7 6.2 6.8 10.5(±2.0) T L L 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 18.5 19.0 19.0 19.0 19.0 19.0 19.0 19.0 19.0 20.5 W T L H max. 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 15.0✽ W 2 W±1.0 4.6 4.7 4.8 5.0 4.9 5.0 5.1 5.3 4.5 4.7 4.9 5.2 4.8 4.9 5.0 5.2 5.5 5.7 5.8 6.0 6.2 6.4 6.7 7.1 7.4 7.8 8.1 8.6 9.1 9.7 14.4 H T max. 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 15.5 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 17.0 20.0 min. D max. H Part No. ERZV14D180 ERZV14D220 ERZV14D270 ERZV14D330 ERZV14D390 ERZV14D470 ERZV14D560 ERZV14D680 ERZV14D820 ERZV14D101 ERZV14D121 ERZV14D151 ERZV14D201 ERZV14D221 ERZV14D241 ERZV14D271 ERZV14D331 ERZV14D361 ERZV14D391 ERZV14D431 ERZV14D471 ERZV14D511 ERZV14D561 ERZV14D621 ERZV14D681 ERZV14D751 ERZV14D821 ERZV14D911 ERZV14D102 ERZV14D112 ERZV14D182CS 4.0 ±1.5 Dimensions in mm (not to scale) L ✽: W2 Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV14D180 to ERZV14D680 10000 Max. Clamping Voltage Max. Leakage Current 300 560 470 200 390 330 Voltage (V) 1000 270 220 470 100 90 80 70 60 50 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec. interval 680 Impulse Current (A) 400 ERZV14D180 to ERZV14D680 180 0 68 0 6 5 40 30 100 Tim 10 3 es 10 4 Time Tim s 10 5 es Ti 10 6 mes Tim es 1 Tim e Tim 10 e Tim s es 2 10 0 39 0 33 70 2 0 22 0 18 20 10 2 1 20 10 9 8 7 6 5 100 1000 Impulse Width (µs) 10000 Test current waveform 10–6 to 10–3 A: Direct current 10–1 to 104 A: 8/20 µs 4 3 10–6 10–5 10–4 10–3 10–2 10–1 100 Current (A) 101 102 103 104 105 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV14D820 to ERZV14D511 ERZV14D820 to ERZV14D511 10000 101 820 511 10 10 2 Tim e Tim s es 10 300 100 90 80 70 60 50 40 30 10-6 271 241 1 20 10000 10000 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec. interval Test Current Waveform 10-6 to 10-3 A: Direct Current 10-1 to 104 A: 8/20 µs 331 221 -5 -4 10 10 -3 10 10 -2 -1 0 10 10 Current (A) 1 2 10 10 10 3 4 10 1000 10 10 Max. Clamping Voltage Max. Leakage Current 1 T Ti ime 10 3 10 me s T 10 4 Time 10 2 ime Tim s 10 5 Tim s es T es 100 10 6 imes Tim es 2 5 5000 3000 1000 ERZV14D561 to ERZV14D112 101 820 ERZV14D561 to ERZV14D182CS 4000 100 Impulse Width (µs) 201 151 121 Surge Current (A) 200 182CS 102 911 821 1 20 112 102 911 821 751 681 621 561 2000 CS 182 100 1000 10000 Impulse Width (µs) ERZV14D182CS 10000 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec. interval 1000 2 11 Surge Current (A) 500 400 1 56 Ti m es T 10 3 10 2 im e s T T 100 10 4 ime im es s 10 5 Time s T 10 6 imes Tim es e 600 m 2 700 Ti 1000 900 800 1 Voltage (V) e m Ti es m 151 121 10 3 T 10 4 ime Tim s 10 5 e Tim s 100 10 6 es Tim es Ti Voltage (V) 1000 2 471 431 391 361 500 400 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec. interval 511 471 431 391 361 331 271 241 221 201 1 1000 900 800 700 600 Max. Leakage Current Surge Current (A) 2000 Max. Clamping Voltage 10 10 300 200 10-6 Test Current Waveform 10-6 to 10-3 A: Direct Current 10-1 to 104 A: 8/20 µs 751 681 621 10-5 10-4 10-3 10-2 10-1 100 Current (A) 101 102 103 104 105 1 20 100 1000 10000 Impulse Width (µs) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) 20 Series Ratings and Characteristics ● Operating Temperature Range : –40 to 85 °C Maximum Allowable Voltage Part No. Varistor Voltage ERZV20D180 18(16 to 20) 11 ERZV20D220 22(20 to 24) ERZV20D270 27(24 to 30) ERZV20D330 33(30 to 36) ERZV20D390 39(35 to 43) 25 ERZV20D470 47(42 to 52) 30 ERZV20D560 56(50 to 62) 35 ERZV20D680 68(61 to 75) 40 V1 mA (V) ACrms (V) DC (V) ● Storage Temperature Range : –40 to 125 °C Clamping Voltage (max.) ✽ Ip Rated Power (V) (W) Maximum Peak Current Capacitance (8/20 µs) (max.) (10/1000 µs) (2 ms) 1 time 2 times Maximum Energy (J) (J) (A) (A) at 1 kHz (pF) 14 36 0.2 13 12 3000 2000 40000 14 18 43 0.2 16 14 3000 2000 30000 17 22 53 0.2 19 17 3000 2000 24500 20 26 65 0.2 24 21 3000 2000 20000 31 77 0.2 28 25 3000 2000 13800 38 93 0.2 34 30 3000 2000 13500 45 110 0.2 41 36 3000 2000 12200 56 135 0.2 49 44 3000 2000 11500 ERZV20D820 82(74 to 90) 50 65 135 1.0 56 40 10000 7000 7500 ERZV20D101 100(90 to 110) 60 85 165 1.0 70 50 10000 7000 6500 ERZV20D121 120(108 to 132) 75 100 200 1.0 85 60 10000 7000 5500 ERZV20D151 150(135 to 165) 95 125 250 1.0 106 75 10000 7000 4500 ERZV20D201 200(185 to 225) 130 170 340 1.0 140 100 10000 7000 1700 ERZV20D221 220(198 to 242) 140 180 360 1.0 155 110 10000 7000 1600 ERZV20D241 240(216 to 264) 150 200 395 1.0 168 120 10000 7000 1500 ERZV20D271 270(247 to 303) 175 225 455 1.0 190 135 10000 7000 1300 ERZV20D331 330(297 to 363) 210 270 545 1.0 228 160 10000 6500 1100 ERZV20D361 360(324 to 396) 230 300 595 1.0 255 180 10000 6500 1100 ERZV20D391 390(351 to 429) 250 320 650 1.0 275 195 10000 6500 1100 ERZV20D431 430(387 to 473) 275 350 710 1.0 303 215 10000 6500 1000 ERZV20D471 470(423 to 517) 300 385 775 1.0 350 250 10000 6500 900 ERZV20D511 510(459 to 561) 320 410 845 1.0 382 273 10000 6500 800 ERZV20D561 560(504 to 616) 350 450 930 1.0 382 273 7500 6500 750 ERZV20D621 620(558 to 682) 385 505 1025 1.0 382 273 7500 6500 700 ERZV20D681 680(612 to 748) 420 560 1120 1.0 382 273 7500 6500 650 ERZV20D751 750(675 to 825) 460 615 1240 1.0 420 300 7500 6500 600 ERZV20D821 820(738 to 902) 510 670 1355 1.0 460 325 7500 6500 530 ERZV20D911 910(819 to 1001) 550 745 1500 1.0 510 360 7500 6500 500 ERZV20D102 1000(900 to 1100) 625 825 1650 1.0 565 400 7500 6500 450 ERZV20D112 1100(990 to 1210) 680 895 1815 1.0 620 440 7500 6500 400 ERZV20D182 1800(1700 to 1980) 1000 1465 2970 1.0 1020 720 7500 6500 250 ✽Ip Measuring current of clamping voltage 180 to 680 : 20 A, 820 to 182 : 100 A Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) ✽ Refer to page 24 to 26 about leads cut type and taping. 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 24.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 25.5 28.0 L±1.0 D 1.5 1.6 1.7 1.9 1.9 2.0 2.1 2.2 W 1.8 2.0 f 1.0 2.2 2.5 2.1 2.2 2.3 (ERZV20D182) 2.5 2.8 D 3.0 3.1 3.3 3.5 3.7 4.2 4.4 4.7 5.1 5.4 f 1.0 5.9 6.4 7.0 10.7(±2.0) T L L H max. 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 15.0✽ W T W2 L W±1.0 5.1 5.2 5.3 5.5 5.5 5.6 5.7 5.8 4.9 5.1 5.3 5.6 5.2 5.3 5.4 5.6 5.9 6.1 6.2 6.4 6.6 6.8 7.1 7.5 7.8 8.2 8.5 9.0 9.5 10.1 14.8 H T max. 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 21.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 23.5 20.0 min. D max. H Part No. ERZV20D180 ERZV20D220 ERZV20D270 ERZV20D330 ERZV20D390 ERZV20D470 ERZV20D560 ERZV20D680 ERZV20D820 ERZV20D101 ERZV20D121 ERZV20D151 ERZV20D201 ERZV20D221 ERZV20D241 ERZV20D271 ERZV20D331 ERZV20D361 ERZV20D391 ERZV20D431 ERZV20D471 ERZV20D511 ERZV20D561 ERZV20D621 ERZV20D681 ERZV20D751 ERZV20D821 ERZV20D911 ERZV20D102 ERZV20D112 ERZV20D182 L 20.0 min. Dimensions in mm (not to scale) ✽: W2 Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV20D180 to ERZV20D680 10000 Max. Clamping Voltage Max. Leakage Current 400 ERZV20D180 to ERZV20D680 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec. interval 680 560 470 390 330 300 200 1000 220 100 90 80 70 60 50 Voltage (V) Impulse Current (A) 270 180 0 68 0 56 70 4 0 39 0 3 3 0 27 40 30 20 10 0 22 0 18 10 9 8 7 6 100 1T im e 2 T 10 ime Tim s 10 2 es 10 3 Time Ti s 10 4 mes Tim es 10 5 Tim es 10 6 Time s 1 20 100 1000 Impulse Width (µs) 10000 Test current waveform 10–6 to 10–3 A: Direct current 10–1 to 104 A: 8/20 µs 5 4 3 10–6 10–5 10–4 10–3 10–2 10–1 100 101 102 103 104 105 Current (A) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) Typical Characteristics Voltage vs. Current Impulse Derating (Relation between impulse width and impulse current multiple) ERZV20D820 to ERZV20D511 ERZV20D820 to ERZV20D511 10000 151 Voltage (V) 100 90 80 70 60 50 271 1 20 201 151 121 10000 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec. interval 820 Test Current Waveform 10-6 to 10-3 A: Direct Current 10-1 to 104 A: 8/20 µs 241 331 221 10-3 10-2 10-1 100 Current (A) 101 102 103 104 105 100 10 Max. Clamping Voltage Max. Leakage Current 182 1 20 112 102 911 821 751 681 621 561 102 911 821 10000 10000 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec. interval Surge Current (A) 500 1 56 e 600 Ti m Tim es 2 e 10 3 Tim s es T 10 4 im e 100 10 5 Time s Tim s es 10 6 Tim es 10 10 m 1 Ti 12 1 2 1000 400 1000 ERZV20D182 2 1000 900 800 100 Impulse Width (µs) 18 Voltage (V) 2 T 10 ime 10 Tim s 2 10 3 Tim es 10 4 Tim es 10 5 Tim es e 10 6 Time s Tim s es e 10-4 1000 m 10-5 2000 700 10000 ERZV20D561 to ERZV20D112 101 5000 3000 1000 Impulse Width (µs) ERZV20D561 to ERZV20D182 4000 100 Ti 30 10-6 10 101 820 1 40 100 2 1 Tim 10 0 Ti es 2 m 10 3 Tim es e T 10 4 im s e 10 5 Tim s Tim es 10 6 e Tim s es 121 511 300 200 Surge Current (A) 271 241 221 201 500 400 1000 e m Ti 471 431 391 361 1 1000 900 800 700 600 511 471 431 391 361 331 Surge Current (A) 2000 2 times : 5 min. interval up to 10 times : 2 min. interval 6 up to 10 times : 10 sec. interval Max. Clamping Voltage Max. Leakage Current 10 300 200 10-6 Test Current Waveform 10-6 to 10-3 A: Direct Current 4 10-1 to 10 A: 8/20 µs 751 681 621 10-5 10-4 10-3 10-2 10-1 100 Current (A) 101 102 103 104 105 1 20 100 1000 10000 Impulse Width (µs) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) Straight Leads Cut Type (Bulk Type) Ratings and Characteristics ✽ Refer to bulk standard type part no. (P9 to P23). Dimensions in mm (not to scale) T✽✽ fd B H D L✽ W ✽ Dimension “L”: Conforms to each individtual specification. ✽✽ Dimension “T”: Conforms to each individual specification. notes Unit : mm Series Symbol Varistor Voltage D H W fd B Standard Products Part No. 7 9 10 14 5 180 to 471 180 to 511 180 to 511 180 to 511 561 to 751 821 to 112 180 to 511 561 to 751 821 to 112 8.5 max. 11.5 max. 11.5 max. 12.5 max. 12.5 max. 15.5 max. 16.0 max. 16.0 max. 7.0 max. 10.0 max. 11.5 max. 14.0 max. 14.5 max. 15.5 max. 15.5 max. 18.5 max. 19.0 max. 19.0 max. 7.5±1.0 7.5±1.0 7.5±1.0 7.5±1.0 5.0±1.0 5.0±1.0 7.5±1.0 7.5±1.0 5.0±1.0 –0.05 –0.05 –0.05 –0.05 –0.05 –0.05 –0.05 –0.05 –0.05 0.80 +0.08 0.80 +0.08 0.80 +0.08 0.80 +0.08 0.60 +0.06 0.60 +0.06 0.80 +0.08 0.80 +0.08 0.60 +0.06 4.0±1.0 4.0±1.0 4.0±1.0 4.0±1.0 4.0±1.0 4.0±1.5 4.0±1.0 4.0±1.0 4.0±1.5 ERZV05D□□□CS ERZV07D□□□CS ERZV09D□□□CS ERZV10D□□□CS ERZV10D□□□CS ERZV10D□□□C1 ERZV14D□□□CS ERZV14D□□□CS ERZV14D□□□C1 Crimped Leads Cut Type (Bulk Type) Ratings and Characteristics ✽ Refer to bulk standard type part no. (P9 to P23). Dimensions in mm (not to scale) T✽✽ A D C C fd W notes B ✽✽✽ L✽ ✽ Dimension “L”: Conforms to each individual specification. ✽✽ Dimension “T”: Conforms to each individual specification. ✽✽✽ Resin extenyions : No resin below the center of the hook. Unit : mm Series Varistor Symbol Voltage A D C W fd B Standard Products Part No. 9 10 14 7 5 180 to 471 180 to 511 180 to 511 180 to 511 561 to 751 821 to 112 180 to 511 561 to 751 821 to 112 13.0 max. 14.5 max. 17.5 max. 17.5 max. 19.0 max. 20.0 max. 21.0 max. 22.0 max. 23.5 max. 8.5 max. 11.5 max. 11.5 max. 12.5 max. 12.5 max. 15.5 max. 16.0 max. 16.0 max. 7.0 max. 1.4±0.4 1.2±0.4 1.4±0.4 1.4±0.4 1.4±0.4 1.4±0.4 1.4±0.4 1.2±0.4 1.2±0.4 7.5±1.0 5.0±1.0 7.5±1.0 7.5±1.0 7.5±1.0 7.5±1.0 7.5±1.0 5.0±1.0 5.0±1.0 –0.05 –0.05 –0.05 –0.05 –0.05 –0.05 –0.05 –0.05 –0.05 0.80 +0.08 0.60 +0.06 0.80 +0.08 0.80 +0.08 0.80 +0.08 0.80 +0.08 0.80 +0.08 0.60 +0.06 0.60 +0.06 4.0±1.0 4.0±1.0 4.0±1.0 4.0±1.0 4.0±1.0 4.0±1.5 4.0±1.0 4.0±1.0 4.0±1.5 ERZV05V□□□CS ERZV07V□□□CS ERZV09V□□□CS ERZV10V□□□CS ERZV10V□□□CS ERZV10V□□□C1 ERZV14V□□□CS ERZV14V□□□CS ERZV14V□□□C1 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) Taping Specifications for Automated Assembly (Straight Leads and Taping) Ratings and Characteristics ✽ Refer to bulk standard type part no. (P9 to P23). Taping Dimensions in mm (not to scale) P2 △h fD P T✽ A Type I·II F1 H0 H W W1 L W0 W2 P1 F Position of H0 dimension fd f D0 t P0 Position of F1 dimension ✽ Dimension “T”: Conforms to each individual specification. Type III·IV △h fD P2 T✻ A P F1 H0 H W W1 L W0 W2 P1 F Position of H0 dimension fd f D0 t P0 Position of F1 dimension ✽ Dimension “T”: Conforms to each individual specification. Unit : mm Series Varistor Voltage Symbol Type P P0 P1 P2 fd F Δh W W0 W1 W2 H H0 F1 f D0 t L fD A Standard Products Part No. 5 180 to 471 Type I 12.7±1.0 12.7±0.3 3.85±0.70 6.35±1.30 0.60 +0.06 –0.05 5.0±0.5 0±2 18.0 +1.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 20 17.0±0.5 7 180 to 511 Type I 12.7±1.0 12.7±0.3 3.85±0.70 6.35±1.30 0.60 +0.06 –0.05 5.0±0.5 0±2 18.0 +1.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 20 17.0±0.5 9 180 to 511 Type I 12.7±1.0 12.7±0.3 3.85±0.70 6.35±1.30 0.60 +0.06 –0.05 5.0±0.5 0±2 18.0 +1.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 20 17.0±0.5 f 4.0±0.2 0.6±0.3 11 max. 7.0 max. 10.0 max. f 4.0±0.2 0.6±0.3 11 max. 8.5 max. 11.5 max. f 4.0±0.2 0.6±0.3 11 max. 11.5 max. 14.0 max. 10 180 to 331 361 to 511 Type II Type I 15.0±1.0 15.0±1.0 15.0±0.3 15.0±0.3 3.75±0.70 3.75±0.70 7.5±1.3 7.5±1.3 0.80 +0.08 0.80 +0.08 –0.05 –0.05 7.5±0.5 7.5±0.5 0±2 0±2 18.0 +1.0 18.0 +1.0 –0.5 –0.5 5.0 min. 5.0 min. 9.0±0.5 9.0±0.5 3 max. 3 max. Approx. 22 Approx. 22 0 18.0 +2.0 16.00 +0.75 –0.50 f 4.0±0.2 f 4.0±0.2 0.6±0.3 0.6±0.3 11 max. 11 max. 11.5 max. 11.5 max. 14.5 max. 14.5 max. 561 to 112 Type II 15.0±1.0 15.0±0.3 3.75±0.70 7.5±1.3 0.80 +0.08 –0.05 7.5±0.5 0±2 18.0 +1.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 22 –0.50 16.00 +0.75 f 4.0±0.2 0.6±0.3 11 max. 12.5 max. 15.5 max. 180 to 331 Type III 30.0±1.0 15.0±0.3 3.75±0.70 7.5±1.3 0.80 +0.08 –0.05 7.5±0.5 0±2 18.0 +1.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 22 18.0 +2.0 0 14 361 to 511 Type IV 30.0±1.0 15.0±0.3 3.75±0.70 7.5±1.3 0.80 +0.08 –0.05 7.5±0.5 0±2 +1.0 18.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 22 –0.50 16.00 +0.75 f 4.0±0.2 f 4.0±0.2 0.6±0.3 0.6±0.3 11 max. 11 max. 15.5 max. 15.5 max. 18.5 max. 18.5 max. 561 to 112 Type IV 30.0±1.0 15.0±0.3 3.75±0.70 7.5±1.3 0.80 +0.08 –0.05 7.5±0.5 0±2 18.0 +1.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 22 –0.50 16.00 +0.75 f 4.0±0.2 0.6±0.3 11 max. 16.0 max. 19.0 max. ERZVA5D□□□ ERZVA7D□□□ ERZVA9D□□□ ERZVGAD□□□ ERZVGAD□□□ ERZVGAD□□□ ERZVGED□□□ ERZVGED□□□ ERZVGED□□□ Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Jan. 2015 “ZNR” Transient/Surge Absorbers (Type D) Taping Specifications for Automated Assembly (Crimped Leads and Taping) Ratings and Characteristics ✽ Refer to bulk standard type part no. (P9 to P23). Taping Dimensions in mm (not to scale) P2 △h fD P T✽ H W W1 L W0 P1 H0 W2 A Type I F fd f D0 t P0 ✽ Dimension “T”: Conforms to each individual specification. △h fD P2 Type II T✽ H W W1 L W0 P1 H0 W2 A P F fd t f D0 P0 ✽ Dimension “T”: Conforms to each individual specification. Series Varistor Voltage Symbol P P0 P1 P2 fd F Δh W W0 W1 W2 H H0 f D0 t L fD A Type 5 180 to 471 Type I 12.7±1.0 12.7±0.3 3.85±0.70 6.35±1.30 0.60 +0.06 –0.05 5.0±0.5 0±2 +1.0 18.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 22 17.0±0.5 f4.0±0.2 0.6±0.3 11 max. 7.0 max. 13.0 max. 7 180 to 511 Type I 12.7±1.0 12.7±0.3 3.85±0.70 6.35±1.30 0.60 +0.06 –0.05 5.0±0.5 0±2 +1.0 18.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 22 17.0±0.5 f4.0±0.2 0.6±0.3 11 max. 8.5 max. 14.5 max. 9 180 to 511 Type I 12.7±1.0 12.7±0.3 3.85±0.70 6.35±1.30 0.60 +0.06 –0.05 5.0±0.5 0±2 +1.0 18.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 22 17.0±0.5 f4.0±0.2 0.6±0.3 11 max. 11.5 max. 17.5 max. 180 to 331 Type I 15.0±1.0 15.0±0.3 3.75±0.70 7.5±1.3 0.80 +0.08 –0.05 7.5±0.5 0±2 +1.0 18.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 22 16.0±0.5 f4.0±0.2 0.6±0.3 11 max. 11.5 max. 17.5 max. Unit : mm 10 361 to 511 Type I 15.0±1.0 15.0±0.3 3.75±0.70 7.5±1.3 +0.08 0.80 –0.05 7.5±0.5 0±2 +1.0 18.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 22 16.0±0.5 f4.0±0.2 0.6±0.3 11 max. 11.5 max. 17.5 max. 561 to 112 Type I 15.0±1.0 15.0±0.3 3.75±0.70 7.5±1.3 +0.08 0.80 –0.05 7.5±0.5 0±2 +1.0 18.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 22 16.0±0.5 f4.0±0.2 0.6±0.3 11 max. 12.5 max. ✽ (refer) 180 to 331 Type II 30.0±1.0 15.0±0.3 3.75±0.70 7.5±1.3 0.80 +0.08 –0.05 7.5±0.5 0±2 +1.0 18.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 22 16.0±0.5 f4.0±0.2 0.6±0.3 11 max. 15.5 max. 21.0 max. 14 361 to 511 Type II 30.0±1.0 15.0±0.3 3.75±0.70 7.5±1.3 +0.08 0.80 –0.05 7.5±0.5 0±2 +1.0 18.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 22 16.0±0.5 f4.0±0.2 0.6±0.3 11 max. 15.5 max. 21.0 max. 561 to 112 Type II 30.0±1.0 15.0±0.3 3.75±0.70 7.5±1.3 +0.08 0.80 –0.05 7.5±0.5 0±2 +1.0 18.0 –0.5 5.0 min. 9.0±0.5 3 max. Approx. 22 16.0±0.5 f4.0±0.2 0.6±0.3 11 max. 16.0 max. ✽ (refer) Standard Products ERZVA5V□□□ ERZVA7V□□□ ERZVA9V□□□ ERZVEAV□□□ ERZVEAV□□□ ERZVEAV□□□ ERZVEEV□□□ ERZVEEV□□□ ERZVEEV□□□ Part No. ✽ Dimension “A” ERZV□□V561 ERZV□□V621 ERZV□□V681 ERZV□□V751 10 Series 19.0 max. 19.0 max. 19.0 max. 19.0 max. 14 Series 22.0 max. 22.0 max. 22.0 max. 22.0 max. ERZV□□V821 ERZV□□V911 ERZV□□V102 ERZV□□V112 10 Series 20.0 max. 20.0 max. 20.0 max. 20.0 max. 14 Series 23.5 max. 23.5 max. 23.5 max. 23.5 max. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 Jan. 2015